photo iOS 10 face recognition does not not with smart battery from apple on the iPhone case 6

Similar Questions

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• HP probook 4530 s - face recognition does not. How can I delete information provided for this

  How can I delete information of face recognition with which I have provided my HP Probook 4530 s when I started the unit? I do not use the software because it does not work when I try to use it and prefer the fingerprint reader.

  Hello

  Uninstall the system of "facial recognition for HP ProtectTools.

  This will remove the data (you may be asked to confirm this choice).

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  There may be second solution (I am not able to check it out).

  Open the HP ProtectTools Security Manager. Look there for the recognition of face on the list.
  Check all the options of this software. There also may be an option to remove this information.

  If you want to check the latest version of this software, then you can download it from here.

• In PES 11 face recognition does not

  Hello

  Please forgive me if this is a kind of long, or the question has already been asked in the Forum. My research don't did me not a real result.

  I am a complete novice in PSE Organizer.

  My configuration: PES 11

  Windows 7 64 bit

  Everything is up-to-date

  I imported my existing data into the standard catalog

  Face detection is performed "manually."

  The first day (program start) without success with it.

  The next day (new trial) this function has (or very) good use.

  To improve the length and clarity, I only scanned a single folder (no album!). Important: while doing this, I noticed that in a tray at the bottom a 'circle' did the trick. Later I discovered that it is the creation of thumbnails. Then for sure this 'thumb-nailing"was not over! But it worked...

  Yesterday, I started the program again. No possibility of a face recognition. So I started completely again, create a new catalog and import all the data again. Delete the 'old' catalog From one day to the next day then automatically create the miniaturization only.

  This morning, the same procedure: a single selected image (with enough easily recognizable faces), then launch the facial recognition. For a very brief moment, a little pop on the screen is visible, where I can see a filling of progress bar. But no faces suggested to put a name on it.

  Hope that this information is sufficient for some tips

  Jean Gangolf

  PS. Please excuse me if I slowed down all the rules and posted this question 2 times: once in English and once in German.

  Please go to C:\Users\psa.prf \AppData\Roaming\Adobe\Elements Organizer\11.0\Organizer and delete, status.dat file.

  Now launch Organizer and see if it works.

  Thank you

  Catherine

• Auto Analyzer/face recognition does not end in PSE9

  Running a C2D 2.66 GHz, 4 GB of RAM Vista 32, PSE9.0.

  I'm desperately try to disable those annoying boxes that appear asking Organizer "who is this?  Under preferences, the following are disabled:

  -Recognition people

  -Auto analyzer options

  -J' even made sure this parser run on startup and run the Analyzer only when the system becomes inactive are also disabled.

  I closed the software and restarted my system, but whenever I come back to the organizer of the PSE, it still works, what can I do?  I was able to disable this option in V8, but have so far been in vain in V9. Any thoughts?

  You can disable the option ' who is that?"by unchecking this option to"View-> see the recognition of people. " Please tell if that helps.

• ITunes does not transfer my data from nano on the site of Nike + iPod Nike

  Hi all, I just bought a new iPod nano (7th gen?) and have been using nike +. I created an account on the site Web Nike +. Whenever I connect my new nano to iTunes to transfer the data to the Web site - iTunes tells me that there is an error "iTunes has not to connect to Nike +.» You don't have permission to access the requested resource"- can anyone help? Went to the apple store today and they tried an another nano and tried a new iTunes via a user account and still the same problem.

  The same thing is happening to me. I'm on Windows 10, latest version of iTunes, and this just error message started appearing there may be a few weeks or a few days. I noticed that if I sync my ipod, the first time that it will not not send data to nike. If I restart my computer and do it again, even if I still get the same error message, it syncs my performance data.

  Have you found a solution to this? It would be great if the fine folks at Apple would respond.

• Speech recognition does not work in Windows 7

  Original title: Windows 7 and speech recognition

  I try to use speech recognition (Microsoft) on Windows 7. Whenever I have try and use it after a few seconds it stops working. I looked on the Microsoft website for updates or tips on the memory required etc. Any suggestions? I have the latest service pack applied. I have 2 GB of memory should I more?

  Thank you
  Anne

  Hi Anne,.

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Speech recognition does not work in Windows 7.

  The problem may occur if the microphone is not close enough to the voice or the microphone input is too low.

  Do you get any error messages?

  To check if the problem is for the above reasons, I suggest to visit:

  Why the computer does not understand my voice commands?

  http://Windows.Microsoft.com/en-in/Windows7/why-doesn

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Package javax.faces.context does not exist

  Hello

  I use Jdev 12.1.3.0.0 and I try to get a value of selectOnechoice drop down (based on Locations1VO) programmatically. Here is the excerpt that I use in the AppModuleImpl.java

  The error I get is the package javax.faces.context does not exist.

  When I remove the import of the javax.faces.context library, I get error cannot find symbol; symbol: FacesContext;

  Could you please help me solve this problem?

  public void processRows () {}

  FacesContext fctx = FacesContext.getCurrentInstance ();

  Application app = fctx.getApplication ();

  ExpressionFactory elFactory = app.getExpressionFactory ();

  ELContext elContext = fctx.getELContext ();

  {ValueExpression valueExp = elFactory.createValueExpression (elContext, "#{bindings.", Object.class "}") Locations1.AttributeValue};

  String vToLoc = null;

  Object obj = valueExp.getValue (elContext);

  If (obj! = null) {}

  vToLoc = obj.toString ();

  }

  System.out.println ("in Loc:" + vToLoc);

  Links DCBindingContainer = this.getDCBindingsContainer ();

  Iterate DCIteratorBinding = bindings.findIteratorBinding("VehiclesHistIterator");

  ViewObject vo = iterer.getViewObject ();

  Rank [] selectedVehRows = vo.getFilteredRows ("Select", true);

  System.out.println ("number of property selected:" + selectedVehRows.length);

  System.out.println ("MoveGrpID # VehNum # VehGroup");

  for (line: selectedAssetRows) {}

  System.out.println (Row.GetAttribute ("GroupID") +"#" + row.getAttribute ("VehSlNumber") + "#"+ row.getAttribute ("VehGroup"));

  callStoredProcedure ("Vehicles_pkg.move_veh_prc(?,?,?,?)", ")

  New Object [] {vToLoc, vGrpId, vVehSlNum, vVehGrp});

  }

  iterer.executeQuery ();

  }

  Thank you

  Create a method in AMImpl that takes the location code as parameter expose this method to the client interface

  Open your page, and then add this method to link of page as an action method

  Now on the button action to call this method using the OperationBinding class and pass the location as parameter code

  check - https://blogs.oracle.com/jdevotnharvest/entry/best_practice_invoking_business_services

  http://mahmoudoracle.blogspot.in/2012/07/ADF-call-method-from-pagedefinition.html

  Ashish

• Face time does not work since this morning if my wifi connection is fine and parameters also very well.

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  Mamimisra wrote:

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  https://support.Apple.com/en-us/HT204168

• Screenshot on iOS 10.0.2 does not

  JJust upgraded to iOS 10.0.2 and screenshot function does not work correctly.

  By pressing the power and the home screen just once catch ONCE.aftwr a restart, but still doesn't work.

  Only, it restarts the phone or throw Siri

  WHY did Apple remove such a valuable feature?

  NickyC53 wrote:

  Only, it restarts the phone or throw Siri

  If the iPhone restarts, it means that you pressed the button too long.  You must quickly press them together.

  If Siri is started, it means that you pressed the home button but not the power button.

  The screen shots work just as they always have done for me.

• Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Michael T.L. says:

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

  If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?

• Speech recognition does not match the language of the User Interface in Windows 8.1

  How can I update my speech reconition language that matches my user interface language? Thank you

  Hello

  Thanks for posting your question on the Microsoft Community.

  I apologize for the inconvenience caused to you.

  I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

  This issue would have occurred due to some damaged system registry entries.

  Please provide me with the following information to better understand the issue.

  1. What language is speech recognition uses in the system?

  2. What is the base language that is installed in the system?

  Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

  You can also check out the link below.

  How to use speech recognition

  http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

  Please provide the information above to help you best.

  Thank you.

• When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."

  When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."   And I also waited for a period of time as well very reasonable.  What can I do?

  original title: EMAILING A PHOTO OF "LIBRARIES/IMAGES".

  Hi BrianS.OR,

  1 are you referring to the client program webmail or email?

  2. what e-mail on the computer client program do you use? Is - this Windows Mail or Windows Live Mail?

  3. What size are the image files?

  4. did you of recent changes on the system?

  You can temporarily disable a security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.

  Things I tried but has not made a difference:

  reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8

  With xp media center

  PS. This occurs also at any time the information down to install an active x on any site control

  The only way to surf now with frustration is to use IE 8 NOT add optional

  So I fixed that on my own and that's how I did it.

  You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.

  Uninstallin IE 8 by going to:

  Start--->

  Control Panel--->

  Add Remove programs--->

  Scroll down to IE 8--->

  Click on delete.

  IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.

  Resart your computer and install IE 8.

  This worked for me and may or may not work for you.