Speech recognition does not work in Windows 7

Similar Questions

• Speech recognition does not work

  It seems that MS speech recognition has bugs in Windows 7. At different times, he has different problems: can't set up a mic, cannot be enabled because "the language configuration is not supported." This seems to be the big problem. I tried to fix it with the online instructions, but could not find the fix said the statement was there.

  Hello

  Scenario 1: Problem with MIC.

  Before troubleshooting,

  1. make sure that the microphone is positioned close enough and you speak directly into it.
  2 make sure that the microphone cables are intact and unbroken. Make sure that the connections are loose and they fit perfectly into the computer.

  If the microphone input level is too low, make sure that the microphone input level is set correctly.
  Entry level to adjust the microphone

  1. Open Sound by clicking on the Start button, then Control Panel. In the search box, type sound, and then click sound.
  2. click on the recording tab.
  3. double-click on the microphone you are using speech recognition.
  4. click the levels tab and then use the slider to adjust the entry level for your microphone.

  Please make sure that the properties of the Microphone are set correctly and check if this solves the problem.

  See the links below for more details:

  Connect one microphone, music player or other audio device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Why the computer does not understand my voice commands?
  http://Windows.Microsoft.com/en-us/Windows7/why-doesn

  Scenario 2:

  Could you please answer these money questions?

  (a) don't you make changes on the computer before this problem?

  This problem may be caused by the speech recognition settings.

  I suggest the following steps:

  1. go in Panel of-> speech recognition

  2. click on options of speech of the advance on the left panel.

  3. change the language to another option.

  4 uncheck "review documents and mail to improve accuracy.

  If this does not work, change the language back.

  If the problem persists, please update the sound card driver and the BIOS to the latest version.

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• USB headset connected to PC speech recognition does not work

  * Original title: can not make headphones work

  I installed a software that involves speech recognition.  I plugged my USB to the PC headset, but when I tried to use Set Up microphone in the control panel / recognition speech nothing works.  I have connected the headphones to an other PC Win7 and it works perfectly, in fact I could stop using a keyboard.

  I reconnected the headset with the first PC and still nothing happens, but I see a message saying "recognition speech could not start checking the Audio devices and sound themes".  I can't find it.

  I looked in devices and printers in CP and found the helmet (C-Media USB headphone set) when I look in Properties / General there is a message "device cannot start (Code 10)".  When I check the driver tells me that the driver is up-to-date.

  When I shut down and restart the PC with headphones connected to a USB port on the front of the PC, I hear a small amount of Crackle, but nothing else.  As I have already said, there is a message on the office, 'recognition speech could not start. and "speech recognition could not start checking the Audio devices and sound themes"

  I have run Windows Update to see if there is an update there, but it makes no difference.

  How can I talk to my PC using my headset?

  Thank you

  Tregarth

  I tried 2 different USB ports on the front of the PC, no improvement.

  I also looked into devices and printers (in Control Panel), the helmet does not show.  Also, when I look in device in CP Manager there is no exclamation point in audio, video and game controllers.

  Usually, the front USB ports are connected by cables (often not armoured or not) to the USB controller in the back of a box of the desktop computer. If you haven't tried a rear USB port, please do. If your laptop no matter what USB port should be good.

  You cannot control Audio through devices and printers. You don't say what version of Windows you are using. If you use a version of Windows with a bottom taskbar, RIGHT click ON the speaker down icon to the right of the taskbar. Select the recording devices. This will open the acoustic window. You should see a USB microphone in the list. See screenshot below. Highlight the USB microphone and set it as the default. This should solve your problem.

  Marty

  

• Satellite A30: Software Dragon Naturally Speaking speech recognition does not work!

  I am unable to get the speech recognition program 7.3 Preffered Dragon Naturally Speaking version to operate successfully on my laptop Satellite A30 P4, using Windows XP as the operating system. It works fine on my PC of similar specs as the Satellite A30. Speech recognition is very poor indeed with the Toshiba laptop. He was sent to the seller twice, but the problem is still not resolved. I know that this Dragon program works fine on other laptops.

  He is also unable to play some of my CD.

  I would like to know if the portable technology is unable to operate with Dragon speech recognition, or is the problem with the A30 series or with my specific computer?

  What characteristic specifications are necessary for the performance of Dragon with success of the Toshiba A30? This microphone is necessary? How many and what types of RAM? An additional sound card can be inserted into the laptop to improve performance?

  Help, please! Anyone with experience with Dragon speech recognition? What could be the problem of CD?

  [Edited by: admin on 19 June 05 14:33]

  Hello

  It's specific software problem and it is not easy to tell what can be the problem. In my opinion, it may be that his card on this unit has no performance you want. Sorry but I have no other explanation.

  These problems can be solved simply by contacting the producer of software because they have much more experience in troubleshooting.

• Speech recognition does not match the language of the User Interface in Windows 8.1

  How can I update my speech reconition language that matches my user interface language? Thank you

  Hello

  Thanks for posting your question on the Microsoft Community.

  I apologize for the inconvenience caused to you.

  I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

  This issue would have occurred due to some damaged system registry entries.

  Please provide me with the following information to better understand the issue.

  1. What language is speech recognition uses in the system?

  2. What is the base language that is installed in the system?

  Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

  You can also check out the link below.

  How to use speech recognition

  http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

  Please provide the information above to help you best.

  Thank you.

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Touch screen does not work in Windows XP - Portege 3505

  Hey

  Anyone know why the touch screen on my portege 3505 does not work in windows xp?

  A lot of cheers

  Steve

  and no one knows what you have done or installed on your laptop?

  Sorry about that, but who need to know that? Have you changed something on your laptop >
  Did you install a new OS? Have you used the Toshiba recovery image?

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• Bluetooth does not work on Windows in Satellite C660-A047

  Hello everyone,

  I have a problem with my laptop (satellite c660-A047) Bluetooth does not work on windows (7 and 8), but it works very well under Linux (Ubuntu, Fedora, Backtrack).

  I have an outgoing method :) to do run on windows, start Linux Live then set the Bluetooth adapter to the off State, and then reboot (do not stop, restart only), and then start windows this time this Bluetooth adapter works great and updated automatically in the Device Manager.

  To use Bluetooth on windows I have to do the same steps: (.)

  If someone wants to know all the details to help me solve these curious case, I will be grateful.

  Thanks, looking forward to hearing from you soon.

  The laptop supports Wlan Atheros / module combo BT.
  This means that a single module shares WiFi and BT connectivity.

  Using Win 7 you must add the additional drivers called filter for driver Atheros BT package.
  So first the Atheros WLan driver must be installed, secondly Atheros BT filter after battery Toshiba BT.

  To help to win 8, you must install two components of driver manually to enable the Bluetooth feature: System Toshiba + Atheros Bluetooth driver driver filter
  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• Qosmio F50-126 - Subwoofer does not work in Windows 7

  My subwoofer does not work in Windows 7.
  I installed the audio driver Dolby Digital... Basically controls the bass.

  That didn't activate it because I don't think the pulse of air, that I used to get under Vista. What driver am I missin?

  I don't have this model laptop but it will be interesting to know if you have that you compared the sound settings in Vista and Win7?
  Can you change anything to make box works properly?

  AFAIK there is no special driver for subwoofer features.

• 2 magic the fn key keyboard does not work (PC windows 7), so I can't exhaust remove fn, fn, fn low... and so on...

  2 magic keyboard fn key does not work (PC windows 7), so I can't use Up, fn, fn + DEL, fn + down... and so on...

  Assuming that 'Boot Camp', correct?

  Search here > https://www.google.com/search?q=magic + keyboard + 2 + windows + on + a + mac + boot + camp + site: apple.com...