Photo screen doesn't have the sharing buttons, projects, or pictures; a few albums

Similar Questions

• Driver Epson stylus photo R300 doesn't have the features of DVD/CD printing

  I managed to install the printer driver R300 has been provided by Windows 7, (Epson does not have a driver for windows 7 on their site).  I also downloaded and installed the Windows 7 version of Epson Print CD.  However, when I try to print on a CD, I get the following message: printer driver dealing with CD printing Epson not installed.

  Is there a work around or another pilot, I can use?

  If you receive the error message "printer driver EPSON The dealing with CD printing is not installed" when you start EPSON Print CD in Windows, then either the printer driver or EPSON EasyPrintModule is not installed on your system.

  EPSON EasyPrintModule collects data of any EPSON printer driver installed on your system. These data are required by applications such as EPSON Creativity Suite or EPSON Print CD to show the good printing options for your printer.

  If EPSON EasyPrintModule is not installed so that this data can be collected. Therefore, the application cannot find the printer driver and reports that it is not installed on the system.

  To resolve this issue, make sure that the following software is installed:

  • The EPSON printer driver.
  • The latest version of EPSON EasyPrintModule.

  Epson R300 assistance:

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-R300/drivers-support?target=article&Extn=.html&articleid=2816

  EasyPrintModule is available on page drivers R300:

  Epson R300 drivers and software:
  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=downloads&OID=26322&prodoid=37368458&category=products

• I do not have the Firefox button at the top of my screen.

  I do not have the Firefox button at the top of my screen, so cannot use any of the functions it controls. I don't have the round symbol of Firefox, but when I right click or click on it, I get only the menu for mazimizing, minimizing or closing the application. I can't find all the information on the site of Mozuilla on how to solve this problem and would welcome any advice I can get. My operating system is Windows 7 Professional. Thank you.

  You probably have your active Menu bar. I think you can use one or the other. To activate your favicon Orange Firefox, right-click on the empty upper part of the browser (next to your tabs) and uncheck the menu bar. I hope this helps.

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• Photos does not open on the shared Volume

  Hello

  I have a mini Mac running Mac OS X Server 10.9.5 as our server family with a shared folder "Photos", which contains a folder with our library of Photos (200 + GB).

  This allows me to mount the shared folder and open pictures to access the library (to download photos, etc.) on my MacBook Pro with Mac OS X 10.10.5.

  It worked fine for a while but now I can't open the shared pictures library.

  On the library to open, it says "library could not be opened.  Pictures has attempted to repair the library 'Hatken Photos of but is unable to open it. Open the other... Quit smoking»

  Console error messages are:

  16/01/2016 8:18:19.942 pm mds [65]: (Server.Error:221) unable to save the path ' / Volumes/Photos "to store {storeID:0x6b000080 registered: YES private: NO age: 3m24s uuid:F8233BD0 - 9FD7-4BE1-84 C 7-F24A4C2BBDBA}

  16/01/2016 8:18:56.885 pm photolibraryd [14166]: failed to open the library Hatken Photos.photoslibrary error: error Domain = NSPOSIXErrorDomain Code = 22 'invalid argument' UserInfo = 0x7fa7c8407160 {NSURL=file:///Volumes/Photos/Hatken%20Photos.photoslibrary/database/metaSchema. db.lock, NSLocalizedDescription = Invalid argument}

  16/01/2016 8:18:56.913 pm Photos [14285]: error: Domain error Code = com.apple.reddwarf = 18 UserInfo 'RDErrorServiceDatabaseOpenError' = 0x7ff338cb9be0 {NSURL=file:///Volumes/Photos/Hatken%20Photos.photoslibrary/, NSLocalizedDescription = RDErrorServiceDatabaseOpenError, NSUnderlyingError = 0x7ff33a072f70 "invalid argument"} while trying to open the Hatken Photos.photoslibrary

  When I try to manually force a repair (Command + Option) it works for a while (at 1 or 2% of the great library) and then closes saying "an error has occurred while repairing permissions of Photos has been unable to repair permissions on your library.  Quit smoking»

  and in the console:

  16/01/2016 10:20:09.451 pm Photos [15652]: start the Permission repair library

  16/01/2016 10:20:09.749 pm mds [65]: (Server.Error:221) unable to save the path ' / Volumes/Photos "to store {storeID:0x6b000080 registered: YES private: NO age: 57m38s uuid:F8233BD0 - 9FD7-4BE1-84 C 7-F24A4C2BBDBA}

  16/01/2016 10:24:38.962 pm Finder [390]: [QL] LSCopyDefaultApplicationURLForURL for file:///Volumes/Photos/Hatken%20Photos.photoslibrary/Database/metaSchema.db returned error operation could not be completed. (OSStatus-10814 error.)

  16/01/2016 10:24:44.124 pm mds [65]: (Server.Error:221) unable to save the path ' / Volumes/Photos "to store {storeID:0x6b000080 registered: YES private: NO age: 4m34s uuid:F8233BD0 - 9FD7-4BE1-84 C 7-F24A4C2BBDBA}

  I manually changed the permissions on the entire library on the server and the shared folder for read and write by all.

  I had a few crashes photo earlier and there are a few files lock inside the photo library:

  . A FBCLockFolder that contains. FBCSemaphoreFile

  Database > metaSchema.db.lock

  The second contains:

  http://www.Apple.com/DTDs/PropertyList-1.0.DTD">

  host name

  -Laptop - 2.local

  hostuuid

  74DC29F6-F519-5BF3-8CFA-3121D4615DDE

  NEST

  21770

  ProcessName

  photolibraryd

  UID

  1001

  which seems reasonable (a former process) but I am not convinced about deleting these, unless someone recommends.

  I am running version 1.0.1 of Photos which I believe is behind the latest version.  Is it because I need to upgrade to get the latest version of Photos to El Capitan?  It's embarrassing, especially if the Photos is buggy on Yosemite (as it seems).

  Recommendations or suggestions?

  Thank you very much

  Ashley.

  I am running version 1.0.1 of Photos which I believe is behind the latest version.  Is it because I need to upgrade to get the latest version of Photos to El Capitan?  It's embarrassing, especially if the Photos is buggy on Yosemite (as it seems).

  Photo is part of the system and is updated by installing the updates and upgrades for your system.  Updated the Photos 1.3 with new features and bug fixes, upgrade to Mac OS X 10.11.2.

  shared 'Photos', with a folder that contains a folder with our library of Photos (200 + GB).

  A shared folder is not enough to share a library between multiple user accounts. If someone wrote to the library can change the ownership of the items in the library file and the previous owner can no longer open the library.

  What helps is changing photo library to another disk (partition) with the "Ignore ownership on this volume" enabled flag.

• ScanJet 5590 HP (L1910C): computer doesn't have the support of the necessary usb software

  OM my new G3 400 ProDesk of HP I have this error message during the installation of the software ScanJet HP5590 - "this computer doesn't have the support of the necessary usb software" - drivers are installed properly i. e. I can scan through a third patry - for example - FastStone software, but I can't use scan buttins anyway. Any ideas?

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• My DPS InDesign doesn't have a "Share" button

  In my Folio Builder, it doesn't have a "Share" button Help, please.

  If you chose the option create a folio in offline mode, click on the Folio Builder menu and select Tlchg to producer Folio.

  

• I want to configure firefox in kiosk mode, but I need to have the Back button (and before) and the available home button.

  The computer will be used only to access online catalog in my library. I need to remove the location toolbar, but keep the "back" button and the "home" button. If I use the Kiosk mode, I do not have the "previous" button. I can set it up so that I have the buttons but not the URL, but a user could right-click on the menu bar and reactivate the address bar. I need to stop them from doing it.
  Thank you!

  Users can always bring up an address bar with the shortcut Ctrl + L if this bar is hidden.

  One possibility is to hide the toolbar elements and elements of (context) menu with code in userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #openLocation, #urlbar-container, #CustomizeToolbarWindow, #toolbar-context-menu {
   display:none!important;
  }
  

• I want to import bookmarks from Safari on same Mac computer. Said Firefox Help Bar Menu/file/import. My Firefox doesn't have the file/import option. How to import bookmarks from Safari to Firefox?

  I want to import bookmarks from Safari on the same Mac computer. Firefox
  Aide said use bar Menu/file/import.
  My Firefox doesn't have the file/import option.
  How to import bookmarks from Safari to Firefox?

  10.2 Firefox on Lion does not import and backup under Show all bookmarks or the file import wizard and the option to import during the installation of Firefox did not work. Private browsing is not on. How to import bookmarks?

• For some reason, I don't have the Firefox Button instead? by the left corner. I don't know I clicked on something somewhere. What

  That will probably be an easy solution; just something I turned off while it is in beta. I "file edit view Favorites Tools Help" in the upper part, but do NOT have the Firefox Button. Any ideas?

  To get the new user interface, you need to hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• My iphone camera 6 doesn't have an option to take direct pictures IE 3 small circles are missing. How can I reset the camera?

  My iphone camera 6 + doesn't have an option to take direct pictures IE 3 small circles are missing. How can I reset the camera?

  Restart your iPhone, iPad or iPod touch - Apple Support

• Error message says that my system doesn't have the ability to read (.) Not able to read the incoming faxes and outgoing of the TIF files).

  Original title: MS Fax.

  I try to read the incoming or outgoing faxes. A message says that my system doesn't have the ability to read (.) TIF files).

  How to solve the problem?

  Thank you

  Alex

  The 'Support' engineer's response is the dumbest answer I've seen in a long time.

  At least as much as I understand your problem, you have no problems, send or receive faxes, but rather, you can not view the faxes that have been sent or received.

  You need to get Windows Picture and Fax Viewer works again (or get a new app to view TIF files).

  Click Start, then click Run, and then type the following in the "Open" box and click OK

  regsvr32 shimgvw.dll

  Don't forget the space after the 32

  A dialog box should include the following:

  "DllRegisterServer in SHIMGVW. DLL succeeded.

  If it does not, type the following in the box 'open '.
         
  regsvr32 %windir%\system32\shimgvw.dll

  And if that fails, go to C:\Windows\system32 and check that there is a file called shimgvw.dll (or does not).

• Tryint to set up a standard modem in Windows XP, however, it doesn't have the Types of available Standard modems

  On Modem Standard (33600)

  I use saved Window XP Professional Version 2002 Service Pack 3. I need to configure a Standard Modem on my computer, however it doesn't have the Types of Standard modems available in the list. However, when I go to control panel-> phone and Modem Options-> Modems-> add-> Next (check don't detect my modem; I will select it from a list.) most computers have a list of Standard Modems (i.e. Standard 56000 bps Modem Standard 33600 bps Modem, etc.), but I do not have those on the list. I need to choose one of those to create the modem that I need for my use. I did it on another computer and it works fine, but the computer I really want it on it does not have the choice to choose a Standard Modem. Any ideas on how to get the installed Standard Microsoft modems?

  Hello

  Follow these steps and check if that helps.

  1. open the file inf under c:\windows\inf

  2. navigate to the modemcsa.inf file.

  3. right click on the file, and then click install.

  4. Once done, check if you have the standard modems listed in the list add a modem.

• Eraser 6 does not work on my unused disk space. It is said that it doesn't have the necessary permissions

  Gum does not work on my unused disk space. It is said that it doesn't have the required permissions. I tried running as admin as troubleshooting told me, but it still does not work? What I am doing wrong.

  The reason why it is not working is that even if you close the gum and reopen it as a Director he is still a running process (which was not stop when you closed the gum) in the background without administrator rights.

  The solution is to ctrl-alt - del-> windows-> processes Task Manager.

  Kill the process called 'eraser.exe', and then you restart gum as an administrator.

  Thus, the background process will win also rights administrator.

  It worked for me :)

• Background switch detected for MyApp (24) who doesn't have the tunnels open - defocus is NOT called

  I get the error "background switch detected for MyApp (24) who doesn't have the tunnels open - defocus is NOT called. Then the Simulator freezes and I can't do anything. Tried to debug but no luck!

  My application has two other entry points implemented from article http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/How_To _...

  Please see code below

  public class UserInterface extends UiApplication{
  
      public static void main(String[] args){
  
          if ((args != null) && (args.length > 0) && (0==StringUtilities.compareToIgnoreCase(args[0].toString(), "GUI"))){
  
              UserInterface theApp = new UserInterface();
              theApp.enterEventDispatcher();
          }
          else {
              try
              {
                  Wait();
                              SetTimer();
                  ManageResources mg = new ManageResources();
                  System.exit(0);
  
              }
              catch (Exception ex)
              {
                  if (RuntimeConfig.DEBUG)
                  {
                      System.out.println("UserInterface, main:  " + ex);
                  }
              }
          }
      }
      public UserInterface() {
          //  DialogDisplay dd = new DialogDisplay();
          pushScreen(new UserInterfaceScreen(this));
      }
  

  I also had this problem, the cause is that my computer is behind a proxy firewall so that MDS services Simulator cannot connect to internet, I added the following lines in the file rimpublic.property in the directory "Eclipse\plugins\net.rim.eide.componentpack4.7.0_4.7.0.46\components\MDS\config".

  application.handler.http.proxyEnabled = true
  application.handler.http.proxyHost = proxyserver
  application.handler.http.proxyPort = 8080

  These lines must be placed in the [MANAGER HTTP] section.

  It will be useful.