Photos of 40 d always blown with built-in flash
I recently bought a used 40 d. Most of the time when I take pictures with the built-in flash, the picture is completely blown. I have updated the firmware and everything reset factory settings. I'm doing something wrong or if the device is broken? This happening more often in Full Auto mode, but also see it in BC. It sometimes seems to be inconsistent, as 2 shots with the same conditions, one is hidden and the other is fine.
Camera: 40 d
Lens: CANON EF 50 1.4 LENS (USM)
See attached... as you can see that it is almost all white. Others are 100% white.
ISO 400
50mm
f/1.4
1/250 s
Flash
AV mode
My experiences to try Auto mode it seems useless way more often than otherwise. For some reason any camera makes terrible decisions on what settings to use. Try this & please report.
Take several pictures in the following way, automatic assistance for one & then the second program, then switch back to Auto and take another picture of a different scene, then switch back to the program & turn this scene again and that several kinds of scene, both inside & outside & where flash will be necessary for some. Continue to use the two program & car at each location / scene and then compare how did better. Always starting from Auto to each scene, you will know which photo in sets was shot using Auto.
Tags: Canon Camera
Similar Questions
-
How to record video clips of full 720 p with built in webcam?
How can I save lot of 720 p clips with a built in webcam and built-in software? I see that photo booth does, but it uses a weird square resolution. I want normal 720 p for youtube or other? Is this possible with built in software? If so, how? If not, are there free programs that will do the trick? Thank you.
The answer is here if anyone needs it:
-
Original title: computer always slow and freezing after clean install
It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.
Hello
Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-outStep 2: You can also check if the problem persists in the clean boot state.
Put your boot system helps determine if third-party applications or startup items are causing the problem.Try the steps in step 1 in the article to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
I can no longer print Windows Photo Viewer printer works very well with all the other prog
My Epson printer has always worked well with the Windows Photo Viewer that I prefer to use.
A few weeks ago, I ran a computer cleaning prog that I didn't like, and so removed, now I can print from any program except Windows Photo Viewer
I use Win 7 Home Prem 64 bitHello
Thanks for the reply.
Method 1.
Check that you are doing the default Windows Photo Viewer.
Try the steps below; It could help us solve the problem.
1. open default programs by clicking the Start button.
2. click on Control Panel, and then click default programs.
3. set your default programs. This option allows to choose the programs that Windows uses by default.
4. Select Windows Photo Viewer in the list and click Set this program as default.
5. try to access photo and check if it opens with the Windows Photo Viewer.
Also access the link to know how to set and change your default programs: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default
Method 2.
I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
Question:
I use Photoshop CS5 version 12.1. Photos I take in Camera Raw with my Canon 60 d are visible and can be worked, but those taken with my Canon 70 d are not. What can I do to be able to view and work on Camera Raw photos taken with both cameras? Y at - it a plug-in that I can use that will allow me to display and work on photos of 70 d and my photos of the 60 d? Helpful suggestions are appreciated.
The 70 d has not supported until the Camera Raw version 8.2:
Devices supported by Adobe Camera Raw
PS Camera Raw versions of CS5 ended with 6.7:
Camera Raw plugin and Adobe application compatibility
You have two options: upgrade to at least Photoshop CC or CS6 or get the free DNG Converter to convert your RAWs 70 d DNG for use in CS5. The last option will always require an additional step.
Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC
-
When addressing and e-mail, addresses always open with "all the address book. This book contains many addresses which are not intended for daily use for most of the mail I write or pass. I want to always open with "Personal address book" to shorten the research process. I have not had any problems with this before the last update.
Firefox does not have email or have an address book, it is strictly a web browser.
If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.
If your problem is with Mozilla Thunderbird, let know us and we can move this thread to the queue of Thunderbird. This issue is currently in the queue of Firefox to get answers.
-
"Search" Firefox Ctrl-F function always starts with "Case-sensitive" automatically activated
"Search" Firefox Ctrl-F always begin with 'Match case' activated automatically every time I start up the browser, even when I start with safe mode disabled modules. Is there a way to have case-sensitive have (without having to check it manually) when I type ctrl-F?
dcode147 said
"Search" Firefox Ctrl-F always begin with 'Match case' activated automatically every time I start up the browser, even when I start with safe mode disabled modules. Is there a way to have case-sensitive have (without having to check it manually) when I type ctrl-F?
If you don't have a user.js file, as I did not, then you can find this information in your profile folder prefs.js. To find this folder, click menu triple horizontal slash on Firefox button, then click the question mark at the bottom, then click "Troubleshooting information" and then click on "View file" next to the profile folder. At this point, you need to open the js file (prefs.js to me, maybe user.js for others) with Notepad.
The entry "accessibility.typeaheadfind.casesensitive" cor - el mentioned above must be just off the top, and if "Match case" is highlighted then it should have a '1' beside him. You will need to close Firefox, then change 1 to 0 and save. When you restart Firefox "Case-sensitive" must return to being disabled.
-
Why Firefox always opens with the last session tabs?
When I open firefox always opens with the last session tabs? How can I solve this problem?
You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.
The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
You can check its contents with a text editor (right click: 'Open with'; do not double-click).
The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.You can remove the user.js file if you do not create this file yourself.
You can use this button to go to the Firefox profile folder currently in use:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
Windows hides certain default file extensions.
Among them are .html, .ini and .js, .txt, so you can see only file name without the file extension.
You can see the type of actual file (file extension) in the properties of the file via the context menu in Windows Explorer. -
How can I reset my "authentication required" username and password? The fields are always filled with my old information.
Follow these steps to delete the recorded data (form) in a drop-down list:
- Click on the (empty) input field on the web page to open the drop-down list
- Select an entry in the drop-down list
- Press the DELETE key (on a Mac: shift + delete) to remove it.
- Tools > Options > Security: passwords: "saved passwords" > "show passwords".
You may need to clear cookies from this site, so if you checked a box to remember you.
-
Firefox is not always compatible with the connection to my comcast email account. I need to clear the cache, and then I am able to get back into my email account. Is there a way to permanently solve this problem? Thank you.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
-
gmail login page always opens with my username and password already filled
I go to the login page for gmail - little matter how I'm here via a bookmark or not - the page is always displayed with my username and password already filled. Questions (a) is not sure, anyone could sign as me simply by pressing 'back' (b) other users in the House need to back my details away in order to enter their own.
I tried to reinstall Firefox - no use. How to make a gmail login page to open with empty boxes for username and password?
Thanks in advance for any advice!
It seems that your username and passoword are saved in your browser. You cannot remove from tools > Options > Security > saved passwords Panel. Also you can enable/disable this password box do not forget in the same pane.
-
Help! My icloud is connected on my two devices (iphone and ipad). I want my iphone photos to syncronyze with my ipad. But I don't want the photos from my ipad to sync with my iphone. What can I do?
iCloud is not configured in this way. If you are connected with the same Apple ID, photos from the two devices will be synchronized to iCloud and vice versa.
-
Can I transfer my photos on iCloud and always keep them on my Mac?
Can I transfer my photos on iCloud and always keep them on my MacMini?
Yes. Indeed if you use iCloud photo library and delete a picture of the Photos app on your Mac, it will be also deleted icloud.
If you open the preferences of Photos and click on iCloud at the top of the preferences window and turn on iCloud photo library and also select the 'download for the Mac originals"rather than the"Optimize Mac Storage"option, the original size will be kept on your Mac.
-
How do I know if my system came with built in wifi
I've never used wifi on my desktop computer. I was told that the new HP desktop computers came with built-in wifi and if it was in airplane mode, it wouldn't work. I tried to find this setting but to locate the search on my system. How can I find out this information to see if mine has built-in wifi.
Hello
The following link shows the specifications of your machine:
http://support.HP.com/us-en/document/c03520552
There is NOT a wireless. I didn't have ANY housing PCI or PCIe spare for a PCIe wireless card so an option that you can try to use something like the following:
http://www.OfficeWorks.com.au/retail/products/technology/Networking/Wireless-USB-adapters
Kind regards.
-
You can restore the photos of the recently deleted items folder? I have an iCloud back for my iPad that I restored it that would have photos on them but then sync with my current iCloud files. Can I restore the last backup of iCloud?
The backup to iCloud for an iPad does not include items that are already in iCloud, your iCloud stream library and my photos are not included in the backup to iCloud.
Maybe you are looking for
-
NVIDIA GeForce GT 650 M switchable don't DO NOT WORK
ENVY of HP dv7-7212nr Notebook PC
-
Leave messages on the e-mail server
I want to use Windows Mail and keep messages on my server too. But when I set up the Windows Mail program that all my mail got leave the web e-mail account so that I can not access the server.Is there a way to have my messages in both places?
-
Windows could not determine if this computer contains a valid system volume?
OK, so I have a laptop VGN-N220E model of Vaio I'm trying to re - install Vista x 32 on. I uninstalled windows and my disks formatted. Completely clean slate. Now I don't have a working disk drive so I will try to re - install from flash drive. I use
-
Newly installed internal Second hard drive not recognized
L1701X XPS laptop (running Win 10). Installed a second 500 GB WD hard drive that is not recognized in the BIOS. I've updated (flashed) BIOS to the A10 and I updated all drivers recommended by Dell Support. If I remove the new second player and hover
-
Problem with epson nx400 printer
Epson nx400 printer. Cartridges has changed twice, but ink works together. Black and blue-green but pink does not at all appear. Cleaning the heads, nozzle check. All of this stuff. Thanks for any help, do not have idea how to solve this problem. Bla