Photoshop CS does not work after installing Mac OS 7

Similar Questions

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My safari does not work after installing iOS 9.3

  My safari does not work after installing iOS 9.3

  This is a known issues with 9.3 and Safari (with the mail application and other applications)

  Some have reported success goes in the settings, safari, advanced and Disabling Javascript. Others said that Opera browser works, so you can use it as a workaround until a patch is issued. There is no indication how long can take this difficulty. Maybe in a few hours, could be days.

  or you just have to wait it out.

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Activation does not work after installing Photoshop CS (version 8.0.1)

  Hello

  After installation I try to activate the product.

  After several numbers about activation Finally I redirected to this site.

  Only the activation does not work, with a message containing information that the online activation server cannot be reached (no error number)

  I don't use the product for a period of time.

  It might be, that it has been installed and enabled on a machine that no longer exists.

  Best regards

  Sven

  For all versions of CS2 and earlier activation servers have been downgraded.  They will not return, ever.  Your CS is no longer useful.

  However, Adobe has provided the CS2 versions that you can download and do not require activation, just a generic special registration code you can use for the installation.

  http://www.Adobe.com/downloads/cs2_downloads/

  Adobe has disabled the server activation for CS2, including Acrobat 7, due to a technical problem. These products have been released more than seven years ago, do not run several modern operating systems and are no longer supported.

  Adobe strongly discourages running software not caring and obsolete. Below serial numbers must be used only by customers who bought legitimately (or earlier) CS2 or Acrobat 7 and the need to maintain their current use of these products.

• Shortcuts keyboard touchpad does not work after installing Wii XP on Satellite A200-1HV

  Synaptics touch after that installation of Windows XP does not work.
  http://i043.Radikal.ru/0805/C5/09a7324bc1d2.jpg

  On Vista I touch "Two arrows" touchpad lite to the top of blue color, but now it doesn't.
  I installed the driver for Win XP Toshiba web site.

  How about the hot keys on the touchpad?

  From Russia with love =)

  Can be I said isn't right, problem? I'll try to talk about my pain. In Windows Vista Home Basic, when I touch "2 arrows" (you can see it on the screen, Angel of the top-right), after that, touchpad started a blue fluorescence, and after I press 1 to 6 buttons on the touchpad (they were all in the red circle) and starts the application tha. But no, when I touch "2 arrows", nothing has changed. It's information helps solve the problem?
  P.S. I try phone support, but now in Russia, we have vacation =)

  Sincerely your JIABP.

• Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

  Hello guys...

  I have a portable Satellite U300 - 15 p with 4 GB of memory.
  I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
  Someone knows this problem?

  TKS

  This is the error

  SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
  * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
  HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite A210: taken micro does not work after installing Vista SP1

  After you have installed SP1 for Vista, had a number of problems and the head is a main & mic Sockets is more work in front of the computer.
  So cannot use Skype etc.

  Any help appreceated

  Bill

  Train from my own experience the SP1 is not fully compatible with the various drivers.
  In case you looks that the audio driver does not work with SP1.

  Don t know what sound card you have (maybe Realtek?), but a sound card driver update would be desirable.
  If it doesn t help you will need to wait until it comes out an update of the audio driver

  CU

• Keyboard backlit Y500 does not work after installing Windows 7

  Got a y500, love, installed Windows 7 (experience challenging, but glad I did now that it's done). Everything works like a charm, EXCEPT the backlight on the keyboard. By pressing FN + space does nothing. The keyboard does not blink when starting upwards, either.

  After repeated calls to the line of Lenovo, the responses I get are simply: we don't know why the keyboard backlight lights with Windows 7 installed.

  I don't want to go through the hassle to put Windows 8 on just for the backlight.

  There must be a way to activate the backlight of the keyboard while running windows 7. Lenovo, can you please go to the top of the chain of command to those who are working on updates of pilot and see if there is a way to make it work? Or tell me if I do something wrong?

  TL; Dr: keyboard backlight worked while Win 8 has been installed, put win 7 on, is no longer works.

  I would check the cable connections, the most likely problem.

  You can get a new keyboard on ebay for ~ $40... I'd rather spend than that being without my cell phone.

  http://www.eBay.com/ITM/400543129741?ssPageName=STRK:MEWAX:it & _trksid = p3984.m1423.l2649

  If the link does not work, you can search and Y500 keyboard, but others do not look right.

• WIFI does not work after installing WIN7 to HP Pavilion DV1000

  I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)

  Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...

  Hi, Andreas:

  Here's what you need to do to get this old Intel Pro 2200 card to work with W7...

  Download the zip version of the driver from the link below.  The first file listed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=15798&lang=eng&OSVersion=Windows%20Vista%2032 * & DownloadType =

  Unzip it into a folder.

  Go to Device Manager and click on the network controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Sony VGN - CR220E Webcam does not work after installing windows 7

  I recently installed windows 7 (not updated, clean installation of windows 7 on my Sony VGN-CR220E, and now my webcam does not work.

  Have already tried the tricks I know and searched the web and there are many others having the same problem, and there are number of recommended suggest solutions. Have tried several of them and has not worked for me after 2 days. Can someone who has actually had this problem and managed to fix it, please let me know.

  Thanks in advance...

  install http://esupport.sony.com/US/p/swu-download.pl?mdl=VGNCR220E&upd_id=5051&os_group_id=6

• Device CD/DVD Toshiba HD DVD (not Bluray) does not work after installing Vista Service Pact 2

  Computer computer = laptop Acer Aspire AS9810-6829
  S/N = LXAF 15 707 0065 023 00 60V0
  Operating system = Windows Vista Ultimate... Service Pack 2
  Problem = DVD player does not work!
  DVD model = TOSHIBA DVGW/HD TS-L802A ATA Device

  Measures taken by the owner to correct the problem.
  1. check the Device Manager and records the following information:

  Windows cannot start this hardware device because its
  information of configuration (in the registry) is incomplete or damaged.
  (Code 19)

  Click on 'Search for solutions' to send data about this device to
  Microsoft and see if there is a solution available.

  2. Replace hard drive with a backup hard drive for 8 monthe ago.
  The DVD worked correctly with the old disk installed hard & Vista Service Pact 1.

  3. has concluded that the information in the registry for the DVD has been damaged.

  4. do you have a complete 'Clean Install' of the operating system and all applications.

  5. the problem seems to be resolved.  The DVD worked.

  6 Windows began its update procedure.  Several updates have been installed as well as
  Service Pack 1.  After each installation of the DVD worked fine.

  03:07 days of windows update, Windows Service Pack 2 has been installed.

  8. immediately after installing Windows Service Pact 2 DVD has stopped working
  Device Manager displays the same message that appears at the point 1 above.

  9. Please help!

  Ken Lewis
  E-mail address is removed from the privacy *.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• My CD/DVD burner does not work after installing Windows 7.

  Hello.

  I recently installed Windows 7 on my laptop (about 2 weeks ago), initially delivered with Windows Vista.

  The facility is perfectly, and I enjoyed the simplicity of the new operating system.

  Everything was going well for about 2 weeks.

  I was able to burn CDs and DVDs.

  But today, when my father asked me to burn a CD for him, Windows Media Player 12 says that I had to connect a burner and restart Windows Media Player 12.

  I restarted the program, which did not work.

  I restarted my computer, that didn't work.

  I uninstalled my CD/DVD burner drivers and reinstalled them back on and I thought that WMP12 had started working.

  But when I put the blank disc inside my laptop and started the burn, my computer gave me a message there was an error in burning the disc, and I had to close WMP12.

  When I got the farm, WMP12 and then tells me to connect a burner and restart the program.

  After that, I looked for the drivers online set to level, or to the bottom of the slope to.

  But none of them worked.

  After that, I talked with a HP technician who told me that it is better to stick to the pre-installed operating system that comes with a computer and not downgrade or upgrade manually.

  She also said that because my computer was made for Windows Vista, it was the compatible operating system for my internal hardware.

  It gives me no drivers or anything to install.

  I should have come to Microsoft first, because now I realize that HP has nothing to do with Windows 7.

  If Microsoft, I ask you:

  When you install Windows 7 on an original Windows Vista laptop and that your CD/DVD writer works for about a week, then it stops working...

  What should I do next to fix this? :(

  Please help ~!

  -Kyo

  Hey Kyo - San,

  Given that the troubleshooter could not see the CD DVD drive, you can try to navigate to the following location in the registry editor and deleted the upper filter and lower filter keys and check if it helps you get the job of CD DVD player.

  1. click on Startand then click all programs.

  2. in the start menu search box type regeditand press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3. in the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the right pane, look for UpperFilters and UpperFilter key and select it.
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry.

  5. on the Edit menu, click delete.

  6. When you are prompted to confirm the deletion, click Yes.

  7. exit the registry editor.

  8 restart the computer.

  Note: Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps in the KB Article: http://support.microsoft.com/kb/322756/

  Access the link below to learn more about the CD-ROM drive or the DVD drive that does not work as expected on a computer.

  http://support.Microsoft.com/kb/929461

  Note: the article above is for Windows Vista and the same applies to Windows 7.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitor does not work after installing Windows 7.

  I have a Dell laptop with a Dell S1709W Flat Panel screen.  After replacing the Windows Vista came with the laptop for Windows 7, the monitor does not work.  The monitor said that he does not any signal from the computer.  The computer does not show that it has detected the monitor.  The monitor's cable and the connections are good.  What should I do to get the monitor to work?

  You have a graphic external connector for a secondary monitor, if yes attach it and then go to the Dell support web site and download Windows 7 drivers for your laptop model. Install the driver chipset first, then the driver graphics/video, network/LAN and drivers of the potential.

  If you do not have an external graphics connector, call Dell Tech support. They have a method to recover your system without losing data or applications.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.