Photoshop version 7: how to activate the brush strokes in trails? [was: Legacy Software needs help please]

Similar Questions

• M6 1205SA 4600 M want to how to increase the 2.3 GHz to 3.2 GHz? Help, please!

  Hi all

  I have a HP Envy M6 1205sa AMD A10 4600 M.

  The unit itself was big on time, I have owned it and has preformed always well.

  I use this product every day and it turned work very well and it is a pleasure to own a unit that has stayed clear of the problems major regualr over more heating, wifi etc.

  Before you speak to soon.

  I must say that it began to show signs of delay. What I mean by that, is in loading and software applications using multiple applications both large scale and scope, it turns to slow down a bit. I don't know if my work is much greater in some contexts but he slowed down just a little.

  At the time where I buy this camera, I was told that it is standard a 2.30 GHz which can be "Turbo Boosted" to 3.20 GHz processor speed.

  My Question is:

  How would can increase what's called Turbo Boost setting to increase the speed of the processor at 3.20 GHz 2.30 GHz?

  All the helpw and advice is much appreciated.

  Concerning

  J Singh

  Hey J-Singh,

  Sorry about that I confused the term Turbo Boost and assumed you had Intel Turbo Boost is a protected term.

  AMD technology is called base Turbo and managers are exactly the same. Here is a specific of the AMD page, if you want to read: the AMD Turbo Core technology.

  There are many tools out there to monitor your CPU usage including task manager built into Windows. (Ctrl + Alt + Del > Task Manager). Other programs out there like CPUID and Speccy are great alternatives for more information.

  You can configure Windows for a clean boot if you find that the system begins to lag. A clean boot will reduce the number of processes and applications that start automatically when Windows starts. You can see how to do this here: How to perform a boot in Windows.

  HP also has a great document on improving the performance of the system without adding RAM: improvement of system performance without adding memory (Windows 8).

  Looking at the specs of your PC, you have 6 GB of DDR3 RAM, which is good, but is expandable to 16 GB. I guess the laptop has a 4 GB card and a 2 GB card installed at the moment, so you can easily add an extra 2 GB by purchasing a 4 GB card to replace the 2 GB. Here is a guide on how to add memory to your laptop: removal and replacement of a Module memory for HP Pavilion m6 and m6 notebook PCs like.

  Spare parts recommended for your laptop, but these aren't the only options, however they are which have been tested for guaranteed return on your laptop (numbers in bold):

  Memory 8 GB (PC3 12800, 1600 MHz) - module 670034-001
  Memory 4 GB (PC3 12800, 1600 MHz) - module 641369-001

  You can buy another RAM if you wish, but you may have problems with it. Buy a faster speed that the laptop can support means that you lost money. If the laptop supports up to 1600 MHz using 1866 GHz RAM will be strangled or may not work at all.

  If you are not familiar with how the (sharp RAM) is here is a little info for you without trying to get too technical:

  RAM stands for Random Access Memory. He named this way because the computer is able to read any of RAM cell unlike the old fashioned tape drives. Tape drives has written to tape in a specific pattern. This means access to the stored memory of the band would turn to a specific area for the information to be drawn from it. With RAM, the computer can pull of any field that vousattendez was a great leap to achieve higher computer speeds.

  Next to the CPU, the RAM is (in my opinion) the most important piece of hardware on your PC in terms of speed. Windows 8 (64-bit) requires at least 2 GB of RAM to run effectively. It would be for the basic operations and does not leave much space for anything as this is other than light web browsing, word processing and other basic use. RAM acts as a temporary location for the processor to use and store information during the processing of requests made by applications. The computer draws information from the hard drive to RAM so it can use data at higher speeds and not be limited to (slowest) speeds of the HARD drive. The more RAM you have the more things that you can do both.

  Think of it like this: If you're a mechanic, and you have only 1 car (job) to work on you only need a garage 1 car (RAM). If you have more cars (more jobs) to work on you need more garage space (more RAM) so you can store the things that you need to finish your work.  Keep in mind of RAM is not the same as the physical storage. RAM is erased when the RAM card loses power (ie. the PC is turned off).

  Hope this helps.

• My monitor is 17 '' amd now my pages are bigger than my screen and I don't know how to make the page smaller to fit on my screen. Help, please.

  my monitor 17 "is smaller than all my pages. The TPO and low headers are not visible. Once I put the pointer over the edge of the image, and then down the toolbar. Help, please. Also. I get that thin lettering and drop thick as you can see. As if they were a beat on the page re: the ink.

  Hi the Minister m annettegraham fast,

  What version of Windows you have installed? Follow the steps in this document to set the resolution of the screen.

  Let is know if this helps.

• printer does not print. the connections are fine. onw document in the print queue will not be deleted. Need help, please no error messages given

  I checked the print queue.  I tried to delete the document does not have several times without success.  There is no error message given.  The printer is just the print requests in the queue with answer oout.  Nothing will get the printer to answer.  Help, please.

  Try this procedure (Note: you must be an administrator to do so):

  1. click on the Start button.

  2. right click "My computer" on the left side, then select 'manage '.

  3. click on "Continue" to popup security message that appears.

  4. in the middle pane of the window that opens, double click on "Services and Applications".

  5. double-click on 'Services '.

  6 scroll to find "print spooler".

  7. right click and select 'Restart' (Note: make sure that you have not opened during this operation the printer print queue window).

  You should now be able to delete the print job (or it may have been deleted automatically).

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• I have the old version of photoshop cs a perpetual license. But I can not activate the license via internet and phone. Can you help me?

  I have the old version of photoshop cs a perpetual license. But I can not activate the license via internet and phone. Can you help me? @

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• How to activate the LCD in Satellite C850-B374 sensor after the BIOS update?

  Hi, friends

  I m currently a customer satisfied with Toshiba since April 2013. I've been using laptops since 2007 after using different brands, I found Toshiba to be good.

  I recently updated the Bios from 6.0 to 6.50 of the Toshiba service station.
  Update was successful and the computer works fine.

  But after restarting the LCD sensor that activates the power button in this model of laptop does not work. After entering the utility parameter that I came to know that CE of bios version is 6 and bios version 6.50 so how to activate the sensor lcd start automatically while I open the lcd screen

  Ashik

  > How to activate the sensor lcd start automatically while I open the lcd screen

  You want to start Notepad by opening the cover. Right?
  In this case you should enable the option in the system of Windows 8 settings

  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  "You need to find the option called: + open Panel - Power On" feature.
  This option must be enabled in order to automatically start the computer when the display lid is opened

• How to activate the avg firewall on in the 2012 edition

  How to activate the avg firewall on in the 2012 edition, when I scanned with mcafee his watch this avg firewall is disabled. only windows firewall is enabled, then how to activate the avg firewall on. Please, help me to overcome this problem.

  Hello

  Running several programs to firewall on your computer at the same time could cause conflicts. It is best to use a firewall program. If you want to disable the windows firewall, see the following:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  You should now be able to activate the avg firewall. If not, contact moy.

  (p.s. to true for antivirus - you should only use 1)

• Why and how to activate the windows Defender?

  Defender goes in a loop when I try to open and then times out. Did not find how to activate the manuallt. Am unable to see Tools option

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to activate the plug ins for WPM 11 on Windows Vista Home Premium 32 bit OS? __

  Cannot read dvd OMP. DVD will not auto play and got an error msg stating that the plug-ins have been disabled.  How to activate the plug ins?  I can't reinstall/repair WPM 11 under Vista.  I tried to update without success.  I ran sfc / scannow and there are no errors, found no errors or corrupted files.  Please indicate how do 11 WPM version 11.6002.18065 not work on my Vista Home Premium 32 bit OS! plug-ins have been disabled in 11 OMP

  I have installed a codec pack k - lite with no luck!

  Hi kikstart2,
   
  For the CD/DVD drive problem, try the following steps.
  1. visit the following Web site, click the "Run now" button and follow the instructions in the wizard to run the tool: http://support.microsoft.com/gp/cd_dvd_drive_problems
  2. once the tool is running, restart the computer.
  3. Insert the CD / DVD and check if it works very well.
   
  NOTE: There is no option to repair/reinstall Windows Media Player on Windows Vista.
   
  If the problem persists, restore the computer to an earlier time when everything worked well. To do this, try the following steps.
  1. Click Start, type system restore in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. click on choose a different restore point and then click Next.
  3. click on a date on which the issue moved not.
  4. click on next.
  5. click on finish.
  6. check if everything works well.
   
  For more information see what is system restore?
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Photoshop CC 2015 is a line connecting the start and end of the brush strokes

  Hi guys,.

  I had a strange problem with a certain brush (size 5px, difficult tour, no shape dynamics, no transfer) in Photoshop CC 2015.1.2.

  It only happens when the drawing very fast on my Cintiq 22HD.

  The problem is PS is a line connecting the start and end of the brush strokes. I don't hold in shift or whatever it is.

  

  Here's my brush settings:
  

  I use a PC with these specs:

  Intel Core i7 - 4790 K 4.00 GHz

  ASUS motherboard

  NVIDIA GeForce GTX 970 (10.18.13.5354 driver version)

  16 GB OF RAM

  Cintiq 22HD

  Win 10
  

  Is it a question of PS or Cintiq?

  Thanks for help.

  OK, here is therefore an update.

  The problem is not at all with Photoshop or Cintiq, with Windows 10 parameters of the stylus.

  Fortunately, there is a small piece of free software that you can download called "Fix my pen" (by Smith Reddy) which defines the features of Windows Tablet PC in the registry for you (essentially by disabling everything related to it):

  viziblr - News - difficulty my pen makes your Wacom tablet JUST WORK on Windows 7

  It works fine on Win10 too.

  Now, as my original problem with Photoshop to do a line connecting the start and end of the brush strokes left, however I have another question more small that came after running difficulty my pen. The lines that I draw now are not smoothed by a software more. You can see the difference below.

  

  Fix My Pen sets a lot of things in the registry, but you cannot individually control which setting is disabled. So I guess that one of them is the cause.

  

  I expect response from Smith about it, cause I have no idea who he is.

• How to activate the warning "no pixel is selected?

  How to activate the warning "no pixel is selected?

  When I selected an empty layer in photoshop, it lets warn me WARNING: no pixels were selected.  How activate this setting prompt warning again?  Thank you.

  Have you tried"reset all warning dialog boxes" in Photoshop > Preferences > General.

• How to activate the PAPI-WS in Oracle Enterprise BPM v 10.3?

  Hi all
  
  I use Oracle BPM admin Version 10.3 and don't get a checkbox 'PAPI Web Service' inside the "BPM Web Application" tab. Please help me find how to activate the PAPI-WS...
  
  Thank you and best regards,
  Ankur Oswal

  If you use Oracle BPM autonomous, start the BPM Admin Center-> click 'Configuration'-> 'BPM Web Applications' tab-> click on the check box 'PAPI Web Services '.

  If you use Oracle BPM for WLS, you don't have to do anything, and the box is not in the 'BPM Web Applications' tab.

  Dan

• How to activate the spell checker

  I use Mozilla Thunderbirds e-mail and would like to know how to activate the spell checker - Help

  http://email.about.com/od/mozillathunderbirdtips/Qt/et_inline_spell.htm

• How to activate the pop-up windows?

  I can't fill a demand for services with ASCAP because I've not enabled popups. So, how to activate the pop-up windows?

  You can uncheck the block pop-up windows under the Orange Firefox button > Options > Options > content tab.

  See more details here

• How to activate the BT on the Satellite C660-184?

  Toshiba produces online information continues to tell me that the Bluetooth 3.0 is available for my computer, but annoyingly not to tell me how I can get it.

  It would be useful that this information came with a link that I can use to act on the information.

  Does anyone know how bluetooth can be enabled on my computer?

  All the info and the latest BT downloads, you can find the portal of Toshiba BT - http://aps2.toshiba-tro.de/bluetooth/

  How to activate the BT?
  Activate WLAN first and when WLAN led on the key FN + F8 use combination and allow to BT