PhotoSmart 3210 - unhandled exception NET, library, etc.

Similar Questions

• NET of Microsoft. Framework error - Unhandled Exception has occurred in your Application

  Microsoft.Net Framework error message: Unhandled Exception has occurred in your application I receive this title of Microsoft.NET Framework error message: unhandled exception has occurred in your application.  If you click on continue, the application will ignore this error and attempt to continue.  If you click on leave. the application closes immediately.

  Help, please! I was told by some tech online that my registry keys have been corrupted or something! I don't know what to do, and I hope that this will not affect my computer like a virus or something. I tried to "repair" of microsoft .NET framework in my programs and features, but it did not work. What I'm doing!

  Microsoft.Net Framework error message: Unhandled Exception has occurred in your application I receive this title of Microsoft.NET Framework error message: unhandled exception has occurred in your application.  If you click on continue, the application will ignore this error and attempt to continue.  If you click on leave. the application closes immediately.

  Help, please! I was told by some tech online that my registry keys have been corrupted or something! I don't know what to do, and I hope that this will not affect my computer like a virus or something. I tried to "repair" of microsoft .NET framework in my programs and features, but it did not work. What I'm doing!

  Clean your existing .net versions using .net Framework clean utility (if applicable)

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  Download and install the stand-alone Installer.... NET framework 4 and install it

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17718

• Pursuant to the window, we call exe, created in wpf, we got an error like ' an unhandled exception microsorft net framework exception due to the jilplayer.exe ' [6034]

  Pursuant to the window, we call exe, created in wpf, we got an error like ' an unhandled exception microsorft net framework exception due to the jilplayer.exe ' [6034]

  Hello Kumar,

  The question you have posted is related to Windows Presentation Foundation (WPF). The right place to contact you would be supported in MSDN. I suggest you to check with the help of MSDN for more information.

  http://social.msdn.Microsoft.com/forums/en-us/newThread?category=netdevelopment&Forum=WPF

• NET Microsoft receiver. Framework error: an unhandled exception occurred in a component in your application, after installing mechanic iolo.

  Original title: Microsoft NET. Framework error

  I recently installed mechanic iolo on my computer. I didn't know that he would do anything in my register. I was just trying to get my computer to run faster as it allows. Now I have a display error on my screen that says

  Microsoft .NET Framework
  An unhandled exception has occurred in a component in your application. Click on continue and application will ignore this error and attempt to continue.
  Object reference is not set to an instance of an object.
  When I click on continue, the error message stays on my screen.
   
  What can I do to solve this problem. Obviously, I'm not savvy in computer science.

  Hi Cindy,.

  You can read the following article to repair all the facilities of the .NET Framework on the computer and check if it helps...

  Repair the Installation of .NET Framework

• before each closing unhandled exception message

  The message reads: he arrives at each stop down, now to turn on.

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.ComponentModel.Win32Exception: Error creating window Handle.
  to System.Windows.Forms.NativeWindow.CreateHandle (CreateParams cp)
  at System.Windows.Forms.Timer.TimerNativeWindow.EnsureHandle)
  at System.Windows.Forms.Timer.TimerNativeWindow.StartTimer (Int32 interval)
  at System.Windows.Forms.Timer.set_Enabled (Boolean value)
  at System.Windows.Forms.Timer.Start)
  at h7.bq)
  at h7.bi)
  at h7.u (Object A_0, EventArgs A_1)
  to System.Windows.Forms.Form.OnActivated (ByVal e As EventArgs)
  at System.Windows.Forms.Form.set_Active (Boolean value)
  at System.Windows.Forms.Form.WmActivate (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at f2.b.a (Message & A_0)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4200 (NetFxQFE.050727 - 4200)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  DellDock
  Assembly version: 1.0.0.1527
  Win32 version: 1.0.0.1527
  Code: file:///C:/Program%20Files/Dell/DellDock/DellDock.exe
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  MyDock.Util
  Assembly version: 1.0.0.1527
  Win32 version: 1.0.0.1527
  Code: file:///C:/Program%20Files/Dell/DellDock/MyDock.Util.DLL
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  MenuSkinning
  Assembly version: 7.2.0.12
  Win32 version: 7.2.0.12
  Code: file:///C:/Program%20Files/Dell/DellDock/MenuSkinning.DLL
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  nsna6gec
  Assembly version: 1.0.0.1527
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  Accessibility
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------
  isallzq9
  Assembly version: 1.0.0.1527
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Management
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install HP PhotoSmart 3210 on 8.1, 64-bit Windows. You want to start.

  Goal: Printer install HP Photosmart 3210, FUll CV utility (Solution Center, Photo Creations, etc.) on a new DELL system running Windows 8.1, 64-bit.

  Hardware configuration: The HP 3210 is connected by Ethernet to Western Digital My Net N750 router.  Two computers are connected to the same router: a race of all-in-one DELL 8.1 of Windows with all updates installed (this is the system I am trying to install the HP software on) and an Apple iMac, I need only basic printing capability.  Both computers are temporarily connected via WiFi; This will be changed to Ethernet at a later date.  The router using DHCP to assign IP addresses to devices, including printer.  I can ping the printer from two computers.  I can set up the HP embedded web server on both computers.  The iMac can print and scan from the printer.

  Short story: I tried several times to install the printer drivers and the HP utility software on Windows 8.1 System.  At one point, I installed the drivers, but not able to install the utilities.  When I finally got the utilities installed, they did not see the printer.  At the present time, even the notebook can not see the printer.  The mistakes that I've seen are:
  -"The system cannot find the file specified."  (the name of the file contained the string ice_suffix.  "I believe that this failure was due to the presence of McAfee Security software, using msconfig more later disabled.)
  -BSOD BAD_POOL_ERROR
  -No network detected (from HP Install Wizard) device
  "This app prevents you to restart" (the title of the app was "HP all-in-one series")
  I tried the wizard install the HP add a tool of the device, the print and Scan doctor and several other things.  I did a level 4 uninstall as described below, which has encountered an error in an early phase, but continued after I clicked "OK".  I installed the latest version of Flash.  The System File Checker has been run when the system was first installed on May 29 and found no problem.  I temporarily wired the printer directly on the Windows system via USB (and then put it back on the router).  I have reset the printer by removing the power for a minute, etc, etc.

  At this point, I would like to clean the system as much as possible and try again from scratch, using the installation wizard.  Based on my experience so far and a careful reading of the many positions installation - problems on this forum, I created a checklist of proposed to achieve this.

  My request on the forum: Please see the checklist.  I won't go forward until it has been approved as being complete and accurate.  Missing something?  Nothing is unnecessary?  The order should be changed?

  NOTE: Step 6 assume that you have already tried to install the software and therefore to have a copy of the uninstaller on the system utilities.  In my case it is true.

  1 connect the printer to the router via Ethernet.  (This is my current setup).
  2 turn on the printer.  Unplug the power cable from the back of the printer.  Wait at least one minute.  Reconnect the power cable.  Wait for the printer to initialize.
  3. do a "clean boot": (now RMB) do a right-click on the icon of window in the lower left of the screen.  Select 'run '.  Enter "msconfig".  Click on 'OK '.  In the Services tab, check "hide all Microsoft Services".  Click on "disable all".  In the Startup tab, click on "Open Task Manager".  On the start of the Task Manager tab, click the top entry and then click "disable".  Repeat for each entry in the list.  Verify that the status column now contains "Disabled" for each entry.  Click on the 'X' at the top right of the window to close the Task Manager.  In the System Configuration window, click 'OK '.
  4. RESTART the system to perform a start without the Services and start disabled.
  5. connect to an administrator ID.  This must be the ID used previously to try to install the software.
  6 do an uninstall of level 4: RMB on the icon of the window in the lower left corner of the screen.  Select 'run '.  Enter '%Temp% '.  Click on 'OK '.  In the resulting display folder (supposed to be in C:/Users / 'ID' / AppData/Local/Temp, where 'ID' is your user ID) enter "Uninstall_L4" in the search box at top right of the screen.  This should find 'Uninstall_L4.bat' (supposed to be in C:/Users / 'ID' / AppData/Local/Temp/7zS0 * / util/ccc).  Click (or double-click if your system is configured to require that).  [NOTE: several forum posts say to use L4uninstall.exe, but this file is not anywhere in the Temp folder on my system.]
  7 meet the need of all the prompts that appear.  A final prompt will tell you that a restart is required.  If two windows appear at the same time, both with "Restart" buttons on them, click the button in the larger window.  [Note from experience: when I click on restart in the small window, WIndows complained that he could not start because the larger window was always active.]
  8. once the system restarted, RMB-the icon of the window > run--> msiexec /unreg-> OK, then run RMB window icon->-> msiexec/regserver-> OK.
  9. check that the uninstall and complete if necessary:
  Look in C:/Program Files (x 86) for HP records; If found, delete them.
  Look in C:/Program Data HP records; If found, delete them.
  RMB-> the icon of the window run-> % Temp %-> OK.  Delete all files in the folder that results.  [NOTE that it prevents to run uninstall again until installation has been completed, since it is where are the uninstall files.]
  RMB-> Panel window icon-> devices and printers.  If the HP 3200 Series is broadcast, RMB-> remove the instrument.
  RMB icon window-> Control Panel-> system-> device-> tab Manager display-> show hidden devices.  Expand "Printing queues" (click the triangle).  When a HP 3200 queue exists, RMB on it and click on uninstall.  Expand "Printers" and do the same thing.
  RMB-> run-> regedit window icon-> OK. Scroll to the top of the list.  Click on 'Computer' to establish a starting point.  Edit-> Find... check the box "Keys", uncheck the 'Values', 'Data' and "Match whole string only" boxes.  In the "Search" box enter "HP." (including interval)-> then find.  [NOPE, that is not all HP keys and found a few that seem not to be HP (for example SOAHP. (DLL). a search for "HP" finds lots of unrelated keys.  Is a good way to clean the registry if level 4 uninstall it did not?]  Use F3 to search for subsequent entries.  For those who are clearly HP related [How can I be sure?], RMB on the key, and select 'delete '.  [Yes, it's dangerous and without greater clarity I won't actually, but I don't like leaving orphans key autour.]
  10. run Disk Cleanup.  Click the window to access a screen start or Apps.  Type "Disk Cleanup".  Click on "free disk space by deleting unnecessary files.  Check the desired boxes.  Click OK.  Wait for the course to complete.
  11 RESTART the system.
  12 install the HP software.  Pointing a browser on http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe to download the wizard, then run the downloaded file.  On the first prompt screen, click "install".  When you are prompted, select custom installation.  "Uncheck the box 'Unique consumables HP', 'scheme Customer Participation', and ' bing for HP bar '.  When you are prompted for the update preference, select "Ask before updating" [my wife, nonnegotiable preference] remove useful tips and suggestions.  Click on 'Next' as required.  When you are prompted, select the Ethernet connection.  The printer must be discovered.  [On one attempt, at this point, that I received the message "the requested service is not found".  Of course, there is that HP Services listed in msconfig, but in order to get that much, I had turned off them ("clean boot").  This seems to be a catch-22 situation, unless these services should have automatically started earlier in the installation process.]
  13 RESTART.  This is necessary at the end of the installation process.  ["Clean boot" conditions hold back at this point?  If so, I'll have to restore the Services and Startup items later and antother restart.  [When is is safe to do so, that is how do you know that the installation of HP is really over?]

  Again, the purpose of this post is to validate the above list.  Your informed comments will be appreciated.

  Hello

  Please try to uninstall the software by following the Uninstall_L4 utility (as stated in your previous post)

  Then, follow the steps below and reinstall the HP software again:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• application development Toolkit and Windows 7 64-bit - unhandled exception

  Quite simple - I wanted to 'install' TypeDifer.exe as the tool of comparison for '.seq' files in perforce P4V visual client for I can browse and review the differences before check-ins, etc..

  I installed the https://lumen.ni.com/nicif/us/nilabstypdiftst/content.xhtml toolkit - first by a double click, then by installing as an administrator with XP SP3 compatibility selected. The package is very good in both cases, but none of the Toolbox tools will run.

  I've got VS2003, 2005, 2010 installed on this PC, and when I try to run TypeDiffer.exe, I get the JIT debugger breaking in with

  An unhandled exception ('System.Runtime.InteropServices.COMException') occurred in TypeDiffer.exe [71276].

  Other tools all give much the same results. Did I miss something? There are a couple of DLLs with the EXE, do need to be placed elsewhere to ensure that they are seen, or perhaps they will have to be registered and by the installer under Win7 64 are not?

  Grateful for any input.

  We will examine that. One thing I want to mention, is that if you are looking for a different general purpose and use TestStand 2010 or higher, you should probably use the delay comes with TestStand rather under:

  C:\Program Files (x 86) \National Instruments\Shared\TestStand\FileDifferLauncher.exe

  The typediffer is only for types differentiate, so it will only show you all the differences untyped in the file. The differ from 2010 can also diff type differences if you change the options to solve the conflicts of the type not automatically. Really, the only thing the delay comes with TestStand 2010 can not do that you may or may not is that he cannot merge changes from type (it may however merger without type changes and you can use it as a tool of fusion for these purposes with perforce).

  Hope this helps,

  -Doug

• Error unhandled exception has occurred in a component in your application. There is an error in XML document (0 0).

  Original title: Microsoft.NET Framework

  I got a message saying that the unhandled exception has occurred in a component in your application. There is an error in XML document (0 0). What should I do?

  Hello

  1. which version of the Windows operating system is installed on the computer?

  2. Once you get the error message?

  3. What is the exact error message you get?

  4 did you last modified the software on the computer?

  I suggest you go through the steps mentioned in the link. What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  I suggest to start your computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  I also suggest you to perform a clean boot to safe mode and check.

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

• During the installation of the software is Unhandled Exception has occurred in your application

  Moose title: TRY to INSTALL the SOFTWARE to RECEIVE error MESSAGES!

  I get a Message that says: > "has an Unhandled Exception has occurred in your application, if you click on > continue Will ignore this error and attempt to continue, (Itried this > don't continue" ")" also says "internal error cannot Open The Shared > memory Region" when I CLICK on 'details' below is the Message: > see the end of this message for details on the call > just-in-time (JIT) debugging instead of this dialog box. > * text Exception * > internal error: cannot open the shared memory region. > * Load assemblies * > mscorlib > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4214 (VistaSP2GDR.050727 - 4200) > CodeBase >: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll >---> SeoAutomator > Assembly Version: 1.5.6.0 > Win32 Version: 1.5.6.0 > CodeBase: > e file:///C:/Program%20Files/StephenHawkins/SEO%20Link%20Builder/SeoAutomator.ex >---> system > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4215 (VistaSP2GDR.050727 - 4200) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.d he's >---> System.Windows.Forms > Assembly Version : 2.0.0.0 > Win32 version: 2.0.50727.4214 (VistaSP2GDR.050727 - 4200) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c56193 4e089/System.Windows.Forms.dll >---> System.Drawing > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/-System.Drawing.dll >---> System.Configuration > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d 50a3a/System.Configuration.dll >---> System.Xml > Assembly Version : 2.0.0.0 > Win32 version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/Syst em. XML.dll >-> PureComponents.ActionSet > Assembly Version: 2009.1.310.0 > Version Win32: 2009.1.310.0 > CodeBase: > file:///C:/Program%20Files/StephenHawkins/SEO%20Link%20Builder/PureComponents. ActionSet.DLL >--> PureComponents.EntrySet > Assembly Version: 2009.1.310.0 > Version Win32: 2009.1.310.0 > CodeBase: > file:///C:/Program%20Files/StephenHawkins/SEO%20Link%20Builder/PureComponents. EntrySet.DLL >--> PureComponents.ScheduleSet > Assembly Version: 2009.1.621.0 > Version Win32: 2009.1.621.0 > CodeBase: > file:///C:/Program%20Files/StephenHawkins/SEO%20Link%20Builder/PureComponents. ScheduleSet.DLL >---> System.Data.SqlServerCe > Assembly Version: 3.5.1.0 > Win32 Version: 3.5.8080.0 > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Data.SqlServerCe/3.5.1.0__89845dcd 8080cc91/System.Data.SqlServerCe.dll >---> System.Data > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/Syste m.Data.dll >---> System.Transactions > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e0 89/System.Transactions.dll >---> > * JIT debugging * > to enable debugging , the file .config for this just-in-time (JIT) > application or computer (machine.config) must have the > jitDebugging value set in the system.windows.forms section. > The application must also be compiled with debugging > enabled. > For example: > > > > JIT debugging is enabled, any unhandled exception > will be sent to the JIT debugger registered on the computer > rather than be handled by this dialog box. > >
  CAN SOMEONE HELP ME?

  Hi andrewhoward,

  1. What program are you trying to install on the computer?
  2. Are you having similar problem when installing other programs on the computer?
  3. Did you the latest changes on the computer?
  4. What is the version of Windows installed on the computer?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to ask a question

  http://support.Microsoft.com/kb/555375

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• I get a message saying 'unhandled exception has occurred in your application... ". "Never happens again & above.

  While I'm on and work/play on my computer I get this again and again:

  MICROSOFT.NET FRAMEWORK

  "Unhandled exception has occurred in your application. If you click on continue, the application will ignore this error and attempt to continue. If you click on exit, the application closes immediately.

  Configuration system failed to initialize.

  I want to know if I should just remove the MICROSOFT.NET?  I've done it before, but it loaded up again recently when I downloaded a MICROSOFT UPDATE.

  The error pops up at different times and stops everything I do.

  Help!  Is there any solution for this?

  Hi DEAP195,

  Adding to the suggestions, I suggest you follow method 2 in the following article. Click on the link below.

  Fix the .NET Framework

  I hope this helps.

• How can I fix the unhandled exception has ocured in your application

  I'm working on cash CB Hunter - Richard Newton.I downloaded the zipped files and them opened by tutorials, set up a domain name through 000webhost and listwire and then in the indexer site re form brander, powered by phoenix Labs. Under the General brand went ahead, then took me to config settings. I copied and put at the bottom of the form where it indicates the location of settings configuration file (in the re form brander site indexer) then went to the web interface on the form and then rotating ad filled in clickbank products, I want to promote etc and registration page thank you info page and at the bottom of the form that is clicked on the box that says brand and upward came a box that says could not load, unhandled exception has occurred in your application. I'm stuck now don't know wht to do using windows xp professional. Can you help me please.i

  Hello

  This is a question related to the developers of CB with Hunter, so I advise you to contact the manufacturer of the program for better assistance.

  It seems that the software requires certain system settings that your operating system is missing on.

• an unhandled exception error code will not leave my screen,

  An unhandled exception has occurred in a component in an application, Microsoft .NET Framework. Can't get rid of it, can not use microsoft update this message is running continuously, so will not delete or update anything for me

  Another post:

  An exception unhandled on sqlservr.exe, Ive had it for weeks, tried as much as I could so that someone unfamiliar with computers. Ive downloaded .NET Framework 4 and SQL Server 2008, as these seemed to be the ones to help, but not so much, Ive tried every anti virus (not all at once), that the side effect of this is that Windows update pushes to install service pack .NET 3.5, as well as the family pack, which downloads but usually install after Ive accepted the rules of M.S. and the Regs and will let no other updates install until This 1 is installed, what obviously will not happen at the moment. My computer opens with Just in Time Debugger informing me of this exception, which was created when I tried the free download of Visual Studio 2010, which is another that made it worse.

  Hi Kenny,

  It sounds like this may be due to a corrupt user profile.  See the following article for troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• unhandled exception has occurred in your application-HELP!

  I get this message when I want to use this application to allow a different camera for PES 2011 soccer game angle.  This has only been coming now, since there is a day, this is the message I get.  Please help if anyone knows what I can do to solve this problem.

  unhandled exception has occurred in your application.  If you click on continue, the application will ignore this error and attempt to contineu.  If you click on exit, the application closes immediately.

  Access to the path ' C:\program files (x 86) \konami\pro evolution soccer 2011\pes2011.exe "is denied

  then I get this when I click on Details

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.UnauthorizedAccessException: Access to the path ' C:\Program Files (x 86) \KONAMI\Pro Evolution Soccer 2011\pes2011.exe ' is denied.
  at System.IO.__Error.WinIOError (Int32 errorCode, String maybeFullPath)
  at System.IO.FileStream.Init (String path, mode FileMode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, bufferSize Int32, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
  at System.IO.FileStream... ctor (String path, FileMode mode, FileAccess access, FileShare share)
  to System.IO.File.Open (String path, FileMode mode)
  at Camera_Setup.CameraSetup.CheckBoximportPES10_CheckedChanged (Object sender, EventArgs e) in C:\Users\Anwender\Desktop\VB Projekte\PES 2011 Settings\Camera_Setup\Camera_Setup\CameraSetup.vb:line 2474 camera
  to System.Windows.Forms.CheckBox.OnCheckedChanged (ByVal e As EventArgs)
  to System.Windows.Forms.CheckBox.set_CheckState (CheckState value)
  to System.Windows.Forms.CheckBox.OnClick (ByVal e As EventArgs)
  at System.Windows.Forms.CheckBox.OnMouseUp (MouseEventArgs mevent)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ButtonBase.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4206 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  CameraSettings
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Users/Victoria/Desktop/PES2011_Camera_Settings_1.3/CameraSettings.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 8.0.0.0
  Win32 Version: 8.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  Accessibility
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Hey, thanks for the tips, I have actually managed to do work once again to do a system restore to an earlier date, that she worked so now its fine.  I don't see why it did not work but now its good.

  Thank you

• Unhandled exception (404). Not been found. what Miss me in the stacks

  I tried to download a new course to my GPS. I received an error message about an unhandled exception. I am running windows 7 Professional, if that makes a difference on the message.

  The GPS manufacturer said it's a problem with.NET Framework and suggested I uninstall and reinstall. I did but received the same exact error. I've uninstalled and reinstalled the GPS software, without success.

  Previous experience, I have disabled the firewall to see if it has been the cause of error. When defective, I even disabled my antivirus. He still has the same message. I reinstalled the software from the disc. It made no difference. I downloaded the software from the homepage, and it made no difference.

  I hope someone who understands better than me, code can shed some light on the question. The V300 is link. I can see the previous downloads to my unit. When I try to download a new course, the following message appears

  The exception text *.

  System.Net.WebException: The remote server returned an error: (404) not found.

  at System.Net.WebClient.DownloadFile (Uri address, fileName As String)

  at System.Net.WebClient.DownloadFile (String address, fileName As String)

  at XV3utility.MainForm0304.DownloadCOurseCmapFile (String Courseid, String CourseMapFileName, String target)

  at XV3utility.MainForm0304.DownLoadCourseById (String id, upload String, DataSet myds, String map_target, Boolean depointflag)

  at XV3utility.MainForm0304.button_download_Click (Object sender, EventArgs e)

  at System.Windows.Forms.Control.OnClick (EventArgs e)

  at System.Windows.Forms.Button.OnClick (EventArgs e)

  at System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)

  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)

  at System.Windows.Forms.Control.WndProc (Message & m)

  at System.Windows.Forms.ButtonBase.WndProc (Message & m)

  at System.Windows.Forms.Button.WndProc (Message & m)

  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)

  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)

  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.

  mscorlib

  Assembly version: 2.0.0.0

  Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727 - 4900)

  Code:file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll

  ----------------------------------------

  V300

  Assembly version: 2.5.2.5

  Win32 version: 2.5.2.5

  Code:file:///C:/Program%20Files/Sonocaddie%20V300/V300.exe

  ----------------------------------------

  System

  Assembly version: 2.0.0.0

  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)

  Code:file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll

  ----------------------------------------

  System.Windows.Forms

  Assembly version: 2.0.0.0

  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)

  Code:file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll

  ----------------------------------------

  System.Drawing

  Assembly version: 2.0.0.0

  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)

  Code:file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll

  ----------------------------------------

  System.Data

  Assembly version: 2.0.0.0

  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)

  Code:file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll

  ----------------------------------------

  System.Xml

  Assembly version: 2.0.0.0

  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)

  Code:file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll

  ----------------------------------------

  XV3utility

  Assembly version: 0.0.0.0

  Win32 version: 0.0.0.0

  Code:file:///C:/Program%20Files/Sonocaddie%20V300/XV3utility.EXE

  ----------------------------------------

  System.Configuration

  Assembly version: 2.0.0.0

  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)

  Code:file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll

  Thanks again,

  SHANED

  404 means that the file was not found. It is a HTTP error. The program attempts to download a file, which failed because the file is not on the downloadlocation. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Poor print quality Photosmart 3210 with OK with XP Windows 8.1

  The downloaded programs and drivers for the "HP Photosmart 3210' using Windows 8.1 do not provide quality sectionals, resolution, paper size, etc., which was available on Windows XT.

  Hello!  Sorry above my pay grade.  Make a new post and ask your question on to the bottom of ranking to W7?

  Not many people like W8. When you all get out all the bugs in a few years, I'll think to the top of standings. Until then, I'll stay with my W7