Photosmart 5520, vista, the printer does not illuminate until I have unplug and plug it back

Similar Questions

• Photosmart HP 5510: The printer does not print in black

  All of a sudden, my printer does not print in black. I replaced the cartridge with a new black cartridge with the same result. All other colours print fine. I checked the settings on the device and it shows that the black cartridge is full.

  If anyone has had this problem and can offer a solution? Thank you very much.

  In the paper here troubleshooting steps can help solve the black does not print on your Photosmart 5510.  Be sure to check the events on the cartridge, as described in the document.  If you go through all the troubleshooting steps without resolving the question then can help to manually clean the print head as shown in the post here.

• G61 does not illuminate unless I have remove and replace the battery.

  Even when the power cord plugged in it will not light. If I remove and replace the battery it lights mode battery and AC. At the same time my HP Support Advisor and HP s Advisor "stopped working".

  I restore to a previous point, no help. Downloaded a new HP advisor, ho help.

  This happened after the recent big WIN7 updated. Help

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Kind regards

  DP - K

• After turning on the computer, the Touchpad does not work until I have press a key on the keyboard

  Original title: Touch Pad issue

  Hello

  Every time I turn on the computer touchpad does not work (in the form of connection), first I press any key on the keyboard once I press a button and then press the mouse will start to work, I don't know what exactly is the problem... I reinstalled the drivers, checked in services but still the same. Can someone help me on this.

  Kind regards

  NGO

  Hello, NGO,

  Changes were made on the computer before the show?

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Method 2:

  I suggest you to return the item and check if it helps:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Let us know if it helps.

• I have a new router and the printer does not work. I have the hp photosmart c4795 all-in-one.

  What should I do to get the router to recognize the new router

  It's working now. I deleted my printer, downloaded the software from HP and added the new printer. Followed the instructions and it is running. Thank you

• The printer does not exist or is not available to this error message. Help, please!

  Hello

  I have a photosmart C310 premium which has been working perfectly.

  It is connected to my computer via wifi. For a few days when I try to print, I get this message:

  The printer does not exist or is not available at this time.

  However, when I go to my homepage of HP printer, it prints the test page and also contacted my printer, if I want to analyze.

  Help, please!

  Thank you

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Windows Vista - default printer does not have a default

  From: Freddie Kang
  

  I have implemented several printers and have an assigned as the "default" printer network printer I noticed that this status of 'default' for this printer does not remain so after I stop and restart. It seems to default to the fax printer. I then have to reset the printer selected as 'default' to be able to print. This not happens whenever I stop - sometimes, the default printer is as default.

  Someone at - it similar experiences? Solution to the problem?

  Thank you.

  Best regards, S.F. Kang

  From: Cari (MS - MVP)

  It will default to the first he concluded after opening session, so in your case, I think the connection to the network is taken longer, that so he finds the fax first.

  -CARI (MS - MVP)

  Technologies of Windows - Printing & Imaging

  http://www.coribright.com/Windows

  Another response of the community of Windows Vista discussion groups

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• The printer does not and not listed on computer

  I got my printer working and we had power cut off for most of the day, now the printer does not work and I can't even see the printer on the computer more.  I thought I would unplug everything and he can resume No. when I tried to start the printer but it wont even start.

  Hi Burrabliss,

  1. what version of Windows operating system is installed on your computer?

  2. What is the brand and model of the computer?

  Because you cannot start the printer, it might be a hardware problem, I recommend you contact the manufacturer of the printer and check if it helps.

  Refer to the steps in the following Microsoft article.

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• HI - even if I installed a new cartridge (black), the printer does not recognize it

  Hello - I have an officejet 4500 - G510a, and even if I installed a new cartridge identical to that just missed, the printer does not recognize it and don't use it. I would really appreciate the help on this one. Thank you

  Also please mark it as accepted if Solution my answer has solved the problem.

• CANON PIXMA MG3250 PRINTER - seeing yellow (danger?) in the top left corner and the printer does not print

  Original title: Ms. Sue Somerville

  CANON PIXMA MG3250 PRINTER

  Yellow light (danger?) in the top left corner and the printer does not print. It was OK until I changed the inks.

  I lost instructions and can't download the manual though, like many others I tried for hours!

  I used little of this printer and just need to do simple, but urgent tasks.

  Are we supposed to it's bin and get another, then we can just get instructions and resume our work?

  I don't know about spacing in your message.  Heh

  This is a question for CANON - those who make and take over the device in question.  Everything you describe indicate that this is NOT a computer / software somehow problem and the problem would be the same if the device was not connected to any computer at all, an OS X one or a Linux one...

  These are the Microsoft forums.

  Here is the Canon forums:
  http://community.USA.Canon.com/T5/Canon-Forum/CT-p/Canon_Forum

  Here is a link to the manual for the device:

  http://www.Canon-Europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg3250.aspx?type=manuals&language=en#Disclaimer

  I suggest out of ink, check you removed all the "stickers" on the ink that * need * to be removed to work properly and make sure that the ink properly.  Print the pattern check nozzles and then to make sure that everything is installed properly:

  1. Make sure that the power is turned on.

  1. Load a sheet of A4 or letter paper format in the front tray.

  1. Open the output tray extension, open the paper output tray, and then extend the output paper support.

  1. Print the nozzle check pattern.

  (1) press on the button in Maintenance for poster has.

  

  (2) press the color or black.

  The ground of review of the nozzle will print.

  1. Review the rationale for control of the nozzle.

• I requested a copy of the document, but the printer does not respond.

  HPofficejet5610all-in-one, I placed a doc in demand, but the printer does not respond. My icon shows document it and printer status says ready. I even changed the ports, but nothing happens. When I checked on what Control Panel first shows for printers, it showed 4 printers (1 copy), then a fax (copy1). I went to default the copy1 (that computer (windows 7) placed the doc in and still does not have the printer.) The usb cable be bad?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you