Photosmart 7520e - increment the names of scanned files

Similar Questions

• It seems that FFv.12 does not allow Scandinavian letters in the names of downloaded files, but gets stuck all by contacting the localhost?

  I do a fileupload page and it seems that FFv.12 does not allow for Scandinavian letters in the names of downloaded files, given that the browser gets stuck trying to communicate with the local host. Fix? This behavior differs from that of other browsers (IE, Chrome, Opera and Safari).

  That are Unicode characters in the name of the file or the characters in the top 0 x 80-0xFF range?

• The names of source files are larger than is supported by the file system...

  "The names of source files are larger than is supported by the file system. Try to move to a location that has a shorter path name, or try renaming to name more short (s) before performing this operation. »

  There are about 10 subfolders on the computer. None can be deleted, moved, or renamed without one appearing in the message. I tried UNLOCKER ASSISTANT & DELINVFILE get rid of this file. Once more, none worked. Command prompt did not work as well. Please help me, this issue will not go away on my desk.

  Try first to remove bypassing the Recycle Bin using SHIFT-DEL(thanks, Michael Murphy) rather than just led

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion and you have to force the deletion in this case: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  Have you tried Unlocker (I don't know if it's the same as Unlocker Assistant) but if this if it is different, gives it a try.

  Here is an article on this topic (related to another topic, but essentially the same problem) with a number of suggestions - which can work for you: http://www.howtogeek.com/forum/topic/how-to-delete-source-file-names-are-larger-than-is.

  I hope that one of these options help.  If this isn't the case, after return and we will see if we can find another answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why windows media player displays only the names of original files?

  Windows Media Player only shows the original file names that can be confusing if I changed the name of a file. The name of the file (usually audio files) is correct in Windows Explorer, but in the component list of WMP, it's often the old file name. Why is this and what can I do about it? Advice would be appreciated. TA. Kevin.

  What the file type of these music files (MP3, WMA, WAV...)?

  WMP usually displays the title tags of the music file, which is independent of the file name. However, WMP always displays the current file name in the path column of the file, which can be activated by right clicking on a column header and select choose columns.

• To-do bar display of the names of open files

  In Windows Vista, it used to display my documents open in the taskbar with all instances of applications (such as IE) and the names of open files. Windows 7 is not that. Is it possible to restore that? I find it really useful to the click on the right app or the document I want to open.

  David

  Anchorage Alaska

  Right click on the taskbar-> properties-> Taskbar Button :-> select never combine-> Apply-> OK

  See if that helps.

• Using ip instead of the name of Scan scan

  Hi all

  ENV: cluster node 3 running 11.2.0.3.0 database

  OS: Linux

  If the user has complained that they have problems with the following errors.

  //

  java.sql.SQLException:Listener has refused the connection with the following error:

  ORA-12516, TNS:listener could not find Manager available with corresponding protocol stack.

  //

  I did a search on the forum and found that he could hit the known bug (doc-id 1555793.1()

  I suggested the same thing for the user, and he insists, if that's the problem with scan name while he wants to use the ip instead of the name of scan scan in his thin jdbc client.

  Now my questions are

  1. isn't it scanning if device we use Ip scan of directly in lightweight client jdbc?

  2. how the client is resolved to different from that of the host?

  3. If we use ip scan directly in jdbc thin client load balancing takes place (round robin in the DNS)?

  Thank you

  Arun

  1. isn't it scanning if device we use Ip scan of directly in lightweight client jdbc?

  2. how the client is resolved to different from that of the host?

  3. If we use ip scan directly in jdbc thin client load balancing takes place (round robin in the DNS)?

  1. Yes and no. DNS resolve just as the SCAN name to IP address. Then you can certainly use the IP address directly. There are only 3 of your choice. You will only be able to use one of them in this case. But for the rest of the answer to this question, read my response to #3 then (that I took in the mess of the way in which it was requested)

  3. well, you won't get alternating in the headphones of SCAN 3. You will only get one of the listeners SCAN. Best hope that they are running. Otherwise, there will be no possibility to connect. That being said, the round robin DNS entries are not running 'load balancing '. LOAD_BALANCE = YES option in your tnsnames.ora will try to balance the connections in all of the instances available for the SERVICE_NAME. This will always be true although you always only hit a listener to SCAN.

  2. he can't solve another listener SCAN. He can only resolve one. This is why we do not normally use IP addresses directly.

  HTH,
  Brian

• Jobs recording under the name of temporary file

  Hello fellow Scripting Guys!

  //  Save the open file to the new direct to print folder as EPS with artboard enabled.
  
  #target illustrator-19;
  
  
  var newName = prompt ('enter in the new file name', "DJ", "Saveing to STE with new name");
  
  saveFileToEPS();
  
                 var w = new Window("palette","Saved To STE Printer",undefined,{closeButton:false});
                      w.add("statictext",undefined,"File has been saved to STE Printer");
                      w.show();
                      $.sleep(100);
                     w.close();
  
  function saveFileToEPS() //  saves the file to the server as a .EPS document.
  {  
      var thisDoc = app.activeDocument;
      if ( app.documents.length > 0 )
      {
          var saveName = new File ("folder location" + newName);
          saveOpts = new EPSSaveOptions();
          saveOpts.compatibility = Compatibility.ILLUSTRATOR13;
          saveOpts.generateThumbnails = true; 
          saveOpts.preserveEditability = true;
          
          saveOpts.artBoardClipping = true;
          saveOpts.saveMultipleArtboards = true;  
  
          var currentArtboard = app.activeDocument.artboards.getActiveArtboardIndex();
  
          saveOpts.artboardRange = currentArtboard + 1; // artboard # of the currently active artboard
          thisDoc.saveAs( saveName, saveOpts );
      }
  }
  

  I got the code above and when she runs 2/3 of the time, it runs great but the other 1/3 of the time it fails to rename and files are saved under the name of temporary file A1 #.  Is it possible to add a fail safe module to this?  Maybe do create the new file in a folder, make sure that the file has the file, and THEN move the file in this folder into the right pair?

  I annotated the popup code section and I don't see the problem more.  Something in the code below was he locked up and renaming does not...  Good times with the scripts!

  appreciate your help Silly-V.

      /*           var w = new Window("palette","Saved To STE Printer",undefined,{closeButton:false});
                      w.add("statictext",undefined,"File has been saved to STE Printer");
                      w.show();
                      $.sleep(100);
                     w.close(); 
  
  */
  

• Impossible to display the names of HTML files in the HTML Files (topics) folder in the project manager

  RH8, I want to see the names of the HTML files instead of topic titles in the project manager.  I chose the button toggle project manager and the name of the folder is passed to "HTML Files (topics)" of "Project Files".  However, the folder of files HTML (topics) lists topics with subject titles, rather than the names of HTM files.  I was expecting to see the topic list in the Manager component of project with HTM file names.

  What should I do to display topics by names of HTM files in project manager?  The rocker is not working properly, or I do not understand what the toggle button?

  This occurs for each project, we have - all of which have been improved from RoboHelp X 5 to RH8.

  Thanks for your help.

  Susan

  You switch between the new view and the classic view. Try the view menu.

  See www.grainge.org for creating tips and RoboHelp

• HP Photosmart 7520e: HP 7520-e not scanning to E-mail more

  I had my Photosmart 7520e for over a year and have been able to perform all the activities about it without problem. However, the other day I found that I could scan is no longer e-mail. I tried to unplug the router and the printer and reconnect, as has been suggested but cela did not work. I selected manual DNS server and entered for the preferred manual DNS Server 8.8.8.8 and 8.8.4.4 for the other DNS server, but it does not work either.

  When I enter the IP address of my printer I can see that I'm connected to the network and ePrint. everything seems to work as it should. But, when I click on Scan to Email I always get the same message on the printer screen: Server connection error. Unable to connect to Web Services. Confirm access to the Internet, and then try again.

  Hi @ronalds173,

  Thanks for getting back to me.

  I have extra information that might help.

  1. Restore the default settings of your printer directly affect the printing on the computer software, however, to re-establish a wireless connection, your printer may be assigned to a different IP address than what you had before.  The significance of this is that you will have to do some tricks with your configuration on the computer to keep print smoothly. Click the icon of your printer on the desktop of your computer after you do the reset - if it loads the software HP Printer Wizard successfully, you are ready to go and that he should still be able to print from PC.  If you get a pop up that says "Connect a new printer", click that and the printer software automatically detects your printer on the wireless network.  The most pessimistic scenario (very unlikely) and if you lose completely any ability to print, click here to install the HP print and Scan Doctor for Windows.

  2. your printer wireless Direct name and default password - these will remain the same no matter what happens.  The SSID (which is the name of your wireless network) will not be affected by the reset.

  3. you will definitely enter DNS information I posted earlier under section of configuring DNS address.  It will be be switched to "auto". Click to set as "Manual" and enter the numbers as shown.  You should not need to access the IPv6 section for this step.

  4. I recommend to leave this setting alone as the default values are already being optimal for any type of impression you make.

  If you need information more don't be shy to answer.  Thanks again for posting and have a good.

  Kind regards

• is it possible to change the name of a file before I download on my pc

  When I download a file it appears in my download as «0.pdf» folder If I have more than one, it a number after the document. Then I have to open each one to see what it is.
  Windows 10 64 - bit

  If you change your download settings to a single folder set to show the Save as dialog every time, you can change the name of file as well as to choose the location. Please see this article to find out where to change this setting: Start, homepage, tabs and download settings.

  Does it work?

• Photos about El Capitan - double and the names of duplicate files

  Hello, here is a brief summary of how I got here:

  Rebuilt my MBP after you install a second drive. Before that, I backed up all my stuff, using time machine on an external drive of USB3 and manually by using the old method of copy/paste shaped on a second drive USB3. The manual copy consisted of important files such as photos and my photo app library.

  After I rebuilt the system, I copied my library of photos from my backup copy manually in my pictures folder. Then I ran the Photos app and imported this library (I think now that it was a mistake). I then activated iCloud photo library. This began a process of downloading pictures of 18 500 towards the cloud again. At first, I thought... not worth it... it will merge if something is missing.

  Now I was left with many duplicates, I mean a lot. However, the size of the photo library is smaller than it was until I started actually a few GB.

  So, without having the two libraries side by side and comparison - is it possible that the library has not merged correctly but duplicated in fact all photos where file names are the same?

  So, if I got three photos with the name, IMG_7133.jpg, but they were taken on different days, or even several years. But, if you perform a copy and paste manual and you lose a part of the metadata, could all three of these photos be duplicated and crushed (duplicate in this case)? Perhaps it takes the first picture with the name and creates two versions most of it?

  If anyone knows how this works or can vouch for me (and my nerves) Photos would not replace any existing pictures, I would be very grateful

  Thank you very much

  Gerry

  Then I ran the Photos app and imported this library (I think now that it was a mistake) .is solution is going to be

  Yes - a massive mistake - ever import a library as it does not wok and creates a huge mess with a lot of "duplicates" and many other problems - you open libraries - likely the solution will be drag drag the poor desktop library (if you have space) and drag the library of SMT in the folder of the picures and double-click it to open it - it should be good and after checking He can trash trash bad on the dektop library

  LN

• I'm looking for the name of a file that I downloaded four months ago.

  I downloaded a file, either the 15th or 16th. Embarrassing, I lost the file, simply by forgetting his name. I need to be able to find my download history, by date. Does anyone know how to do this? I know that history is retained as long, and that I have not erased from history. Find the date that I visited the Web site was easy using the history and an approximate date, but the download history is less intuitive.

  And, no, don't help not revisit the site; the only way to find the name of the file it (it's an e-book) is to buy it again, which is NOT what I want to do.

  It is in Windows 7 Home Premium, with FireFox v. 28.0 (Yes, I know that it is outdated; I have not used this computer a lot lately). I don't know which version of FireFox has been installed at the time of download - everything that was more common at the time, as I usually make a practice of installing updates.

  You can click on view history to open the library.
  You should see the downloads folder in the left pane between the record of history and bookmarks.
  You can also click on the download icon (down arrow) on the Navigation toolbar, and click Show all downloads.

  If you renamed the file then you will not be able to open the file and may also not be the containing folder where you saved the source of the file, but at least it means that you always have this file download history.

• How can I copy the name of a file, I selected by clicking?

  Hello

  I have a camera controlled by an interface Excel (VBA). Truogh this interface I control motors and tiara (to the report) and the data record in a database. When I use the load of the Excel button, the VBA application call the script Load_DATA_BOF tiara. VBS, (after completing the new data for the report) and the report.  Now for what it work, I copy the name of the name of the file that I want to load in a TextBox control, and all data are to be stored in a txt (protocol_for_load.txt) file and the tiara takes away the data for the report.

  What I want to do is to fill automatically the name of file in the protocol_for_load.txt field, when I select the file in Diadem.

  Is this possible?

  Thank you for your time

  Hi again,

  I solve the problem myself.

  FileNameProtocol = filedlgfile
  filenametxt = "D:\BOF-MIU\Scripts\Protocol files\" & filenameprotocol & ".txt".

  FNO = textfileopen (filenametxt, tfread)

  I forgot to bitch a few symbols: ' and------. "

  I told you I'm new with VBS and I have some problems with the basic stuff: how to include a variable, a function and I forgot some time to put all the signs of the script.

  Thank you for your time.

• Get the names of palette file types

  Hello

  How can I get the names of all types of step programmatically in a palette file?

  In my view, it should be possible, but I tried different approaches using the poster of API reference and couldn't find a way.

  Thank you and best regards,

  Aditya

  TestStand 4.2.1

  LabVIEW 2009 SP1

  propertyObjFile.TypeUsageList.NumTypes

  propertyObjFile.TypeUsageList.GetTypeDefinition)

  typeaspropobj. TypeCategory is TypeCategory_StepTypes

  Hope this helps,

  -Doug

• What is the best way to record movies on PC and change the names of video files?

  Names of files dvr - ms MCE?

  I use Win XP, SP3, MCE 2005 and I want to change the file name of some of the videos saved on my computer.  Currently I use MCE to record movies at home on my computer and then burn them to DVD.  I plugged the VCR/camcorder for video on computer TV card and MCE set to record 1 channel at say 20:00 and turn my VCR/camcorder to play at this time.  MCE records the film as if it were a recorded TV show.  A few questions:

  Is there a better way to do it?  The home movies are on different formats - Betamax, VHS, camcorder Sony 8 and mini DVD.

  The file is saved with descriptive as - news channel 1, channel information (Direct TV channel label), 20:00, 2 h,-where is this kind of things saved info and I can change it?  If I can change it, what format should I use?

  The video file is saved in C:\Documents and Settings\All Users\Shared Documents\Shared Video\... and the name of the file to this location seems to match the name of the actual file displayed in MCE - but if I want to change to say "Christmas" birthday 2005, can I do without corrupting the file?  What format constraints are there for the name of the file?

  Is there a better way to change the description and the name than just using windows and right-click on the file and selecting rename?

  And just to repeat the first question - is there a better way to record movies on the computer?

  Thank you

  Scott

  Hi Scott,.

  According to the research, the method you follow is the best way to record movies on computer.

  You will need to look for a program that helps you edit metadata.

  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.