Photosmart 8450 - "transport print cradle is stuck clear jam, then press ok.

Similar Questions

• the print cartridge cradle is stuck. Clear Jam then press ok

  I did all the prelim stuff to recify this error message, but no joy. What can I do before I send my printer photosmart 7900?

  If you've done everything in this document, you did everything you can before you send it off.  Hope that helps.

• My printer gives me the message 'transport jam'... open door, clear jam and press OK

  HP Officejet 6300 all-in-one

  Mac OS X Snow Leopard

  message: 'transport jam'... open door, clear jam and press OK

  Sometimes, I have to do this many times before it will work.

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  Good luck!

• Photosmart 8450: Photosmart 8450 duplex printing upside down with Win 10

  Hello

  I checked all the settings, tried to flip short side / long-side, reinstalled the drivers and still it prints on the back backwards! He worked well with Windows 7, but not Windows 10.

  Any ideas on what I can do to fix this?

  You can try a different driver.  The Deskjet 6840 driver is compatible with the Photosmart 8450 and also provides a number of additional printing options such as resizing and reflection.  To install this driver, follow these steps: go to the folder of devices and printers, right click on the Photosmart 8450, select properties from the printer, advanced, new driver, Next, Windows Update, wait a few minutes for the list to update.  Now, choose HP as manufacturer and select the driver HP Deskjet 6840 (HP), apply.  Then, select the general tab, printing options and set the default values you want, apply, OK.

• Photosmart 8450 prints only black and white with the new Mac with OS 10.6

  I just bought a new Mac with OS 10.6.  (former was OS 10.5)  Now my Photosmart 8450 will print only in black and white.  I installed the single upgrade on the site of HP, no change.

  Is there an other update I need?

  You want to disable automatic session opening, which may be why it behaves in this way.

  Go to System Preferences

  Go to security

  Under "for all accounts on this computer", place a check mark next to 'turn off automatic connection.

  In addition, I do not know if you set a password for the test account, but put something simple as 123 - just something / anything.

  Once that is done, choose log in the Apple menu, or reboot. This should bring you to the login screen where you can specify the account to enter.

• Cradle of HP ink cartridge 8250 photosmart printer is stuck. Please clean the jam and press OK

  I have an HP photosmart 8250 printer. I had a paper jam, I opened two doors paper jam, paper jam had corrected itself, but the message said then, "the print cartridge cradle is stuck. Please clean the jam and press OK. "Can't get this sign goes.

  OLMS

  Hello

  The print cartridge cradle is stuck is a carriage jam error message. Please make sure that there are no obstacles, and transport must move freely.

  Follow the steps mentioned in the document:

  Link to document

  Although I am an employee of HP, I speak for myself and not for HP.
  Click on the star of CONGRATULATIONS on the left to say 'thank you '.
  Please check one response to "ACCEPTED solution" if it has solved your problem, while others may find it.

• Printer HP photosmart 8450 with error B986666

  I'm looking at what I assume it's an electrical problem.  A clear yellow HP 8450 screen with a circle that is interrupted by a vertical line in the upper part.  It is a HP Photosmart 8450 bought in the United States, now used on the European power via a transformer.  I love this printer and it worked perfectly on the transformer for a year and a half.  I accidentally put the transformer with my foot and when I turned it on the message that b9866666 has appeared on the screen HP 8450 with the above illustration.  Can you help me?

  I just submitted this problem a few minutes ago.  I forgot to mention that I'm running Windows 7.  Also, there is a red light flashing in the box of memory card.  He is looking for a card?  I've never used with a memory card.  How can I get it back to normal?  Thank you.

• Print spooler dies when I try to print something in Windows 7 using a HP Photosmart 8450.

  I've recently updated to Windows Vista Home Preium to Preium to the Windows 7 home page. It was to install an upgrade not a clean place. When I add y printer (HP Photosmart 8450), it adds very well. However, when I try to print something dies the print spooler. I can go in the window services and throw up, but when I print something, it dies again. I hae contacted the HP Support and they said it was a problem with Windows 7.

  Windows Update has nothing to do with the upgrade of Windows. Transfer your question here rather: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP photosmart 8450 printer: ink and toner issues

  It is an older printer that has 3 slots for ink - 97, 99, 100. The 100 is almost impossible to locate and the quality is questionable. Do I need to be able to print?

  Hi @jlou1,

  Welcome to the HP Forums!

  I understand that you are having quality problems when printing with your HP Photosmart 8450. I am pleased to see that for you!

  According to page 22 of the user guidefor a better print quality, your HP printer recommend you install all retail print cartridges before the date indicated on the box.

  So, if you're looking for optimal print quality, then the answer is Yes, you will need this cartridge #100. You might be able to print without the cartridge, but the quality is perhaps not as good.

  Hope that answers your question and have a great day!

• HP Photosmart 8450 printing error

  I have installed my HP Photosmart 8450 (using the hp site because I don't have my original installation disk) & whenever I try to print anything (including a test page) I get an error message...

  Or 'Printing on HP photosmart 8400 error series' "S in an error state" printer"" "

  My computers (laptop) operating system is: Windows8 (64-bit)

  I have already tried to "Troubleshooting" & installed the print/scan doctor & he did his work & said there is nothing to detect & I continued with the test & still can't print.

  I know the printer is working because I can put sticks of memory in the printer & print directly from the printer (no pc), but it seems that the computer & printer just are not interconnected

  Hi belleeyes,

  I did some research on these errors and found that they can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. I recommend looking for defects found in the link below to fix the problem:

  http://goo.GL/kyNeX

  After clicking the link, read the introduction, then click on step 1. Check the hardware. If this does not help, go to step 2, etc.

• HP Photosmart 8450: Printer cartridges

  I have a HP Photosmart 8450 printer, which currently has 3 cartridges in it - 97 HP, HP 99 and 100 HP.  I have trouble finding the 100 HP cartridge, which is a gray Photo cartridge.  I do NOT use this printer for printing photos - I just use it for ordinary printing.  My question is "Is there another cartridge that I can use to replace the 100 HP?"

  Thank you!

  The 100 cartridge is used only for photo printing.  If you do not print photo I suggest remove the cartridge 100 and leaving this space blank.  For the best economy printing on plain paper, you will want to replace the cartridge 99 photo with a black cartridge 96 as well.

• Photosmart 8450, I need all the cartridges printing black documents?

  The Photosmart 8450 printer can accommodate 3 cartridges.  I use this printer to print black-and-white documents.  I wonder if I can buy only a cartridge instead of the 3.  If so, what cartridge should I buy and where should I use?  Thanks for your help.

  Hello

  Unfortunately, you will need to buy all the cartridges AND you can configure only black & white print (in grayscale).

  Kind regards.

• Photosmart 8250: 8250 printer does not print

  To turn on my 8250 printer, got the message "paper jam, clear and push OK" button. There is no jam. Then received message "stuck carriage of the printer, difficulty and press OK button ' transport was not stuck. Push OK, again got paper jam message. Push OK button once again, print carriage moves back and the paper roller oscillates about 30 degrees, front and back, forward and back, etc., then get message jam again. Unable to get the printer menu. How can I solve this problem?

  Hi @Baldy202,

  Welcome to the Forums of HP Support!

  I see that you have problems paper jam with your HP Photosmart 8250 printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that the rollers move, but you still get the same message. I recommend that you take a flashlight and the printer of the give a look deeper inside, to see you will find an obstruction. This could also be the result of a mechanical failure.

  Due to the age of the unit, it seems that we have more access to documents of support for your printer.

  I would like to do a hard reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please use these documents as a guideline, they should be relevant:

  • A 'Paper jam' error on HP Photosmart C4200, C4340 and C4400 all-in-One series,
  • A Message appears 'Transport Jam' for HP Photosmart C4200, C4340 and C4400 Series C4500 all-in-One Printer.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP psc 2210: clear jam on my hp psc 2210 all-in-one printer

  The lights on my printer and the message says: "open the door.  "Clear carriage jam, and then press ENTER.  I do not see a "jam", opened the door and press enter several times.  I still can not reset unplugged machine from one day to the next.

  I think the cartridges are "stuck" on the side of the machine and they are unable to drag in the middle.  Can someone tell me how to fix this jam?

  Would be very grateful for the help!

  Renee'

  Hi @sreneecesand welcome to the Forums of HP!

  I see that you are having problems with jam.  I would like to help!

  I recommend starting by remove (if possible) ink cartridges and perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
  
  I would also say to following the steps outlined in this document:

  A display of the Error Message of "open door, clear transport jam, and then press enter" for HP PSC 2170 2100 and 2210 all-in-One Series Printer "

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Driver Photosmart 8450

  Where can I find a driver for my Photosmart 8450 Vista? the site HP support it but it's 0 kb

  Please read the link I gave, there is no driver to download, it is already included in Vista. Web page:

  The driver for this product solution is included in your Windows Vista operating system and is already on your computer. There is no need to download anything. Follow the steps below to quickly and easily get your product works with Windows Vista.

  CLICK HERE for directions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging