PHP connection with ksoap and nusoap

Similar Questions

• having problem to connect with itunes and update my iphone

  I have problem to connect with itunes and update my iphone. Everyone that nows how to fix this?

  What do you mean by communicating with itunes?

  In any case, ask in the Forums of Apple:
  https://discussions.Apple.com/index.jspa

• Help with E3000N connected with WAP610N and WET610N

  I have a 3000 router and a WAP610N with a WET610N.

  1. the router and AP have a different SSID?  I currently have to connect to another to get from one place to another in my house.

  2. where it has been implemented tech put the access point 2.4 GHz with range of 5 GHz in gray.  This means that the device only works with 2.4 GHz?  I thought it was a double feature of ban.  Greyed out in parahrase info information I see the button on the device and not my network password as indicated in the information of 2.4 GHz.

  3. I can not connect with my ipad on the second connection unless I use a static IP address.  The ipad does not always reminds the static configuration as well so that I have to get all this information to connect to the internet via the access point.  She shows a strong Wifi with excellent resistance but does not connect.  I noticed that he chooses an IP address that begins with 169 instead of 192 in DHCP mode.  Also, it doesn't have the address for the router, just an empty line.  I have no problems connecting to the original installation of Wifi (the one with the router).  The initial problem was the range of the E3000N.  My House is only 32 feet wide and I get a signal rooms low only 2 in the linear sense.  I tried to improve it with the WAP610N and the WET610N.  Both were suggested by technical support.  The firmware is already reflashed and changed settings on several occasions by technical support.  Any help would be appreciated.

  Thank you, Louise

  Thank you for your suggestions, but this has not worked for me.

  As soon as I changed the name of the AP for the name of the router, I had conflicts.

  I have been unable to solve it myself as I could no longer access the configuration page for the access point or bridge.

  After 2 hours with a very patient man, I am now able to use my system again.  He had to reset the two devices and the re - set.

  It seems to work as expected for the moment.  I don't have to use the static IP settings in my I - Pad.

  Thanks again for your contribution.  I appreciate the responses.

  Louise

• Connection with Flex and PHP

  Hello

  I write a login page that will serve as the front end of our main Flex application and hope someone can fill in the blanks here...

  The Flex login page composed of password entry fields, username and a "submit" button. When a user enters their credentials and hit sumbit, HTTPService will send the login information of the user to the PHP script. This script will handle authentication on the MySQL database. If verified, two random questions created by the user will be included in the resulting XML object. These two security issues will be displayed in the login page.

  I have already implemented these logics, but I was wondering...

  1. Assuming that HTTPS / SSL will be implemented in the production, is this OK/safe to include security responses in XML and let the Flex to validate the responses of the user?
  2. After successful validation, how to redirect to the homepage?
  3. I understand the idea of ID of session and token cookies, but what I have to implement this?
  4. How to sign out?

  Thank you very much in advance for your time and the suggestion.

  I currently have three projects on the go, so I can't really spend a lot of time on it. He ca

  n be a bit of a minefield for certain circumstances, but this link should be a good start

  http://corlan.org/2008/07/22/Flex-Air-PHP-and-user-authentication/

  Personally, I would probably support using the notion of token stick at its connection to the flex application and whenever the data request system is passed a token (baton), the token of the wand is also past and demand verified as a user that is logged by the PHP backend.

  Naturally, it all depends on how secure your application must be to decide exactly what appropriate measures. The data passed between client and server and back can be intercepted if a secure protocol is not used.

  Paul

• Intermittent Internet connection with WPC100 and WRT110

  I bought a router WRT110 wireless several weeks ago.  Used with my WPC55AG without any problem at all.  I liked the wireless-N, so I decided to upgrade to a Wireless N notebook card and bought a WPC100.  I can still connect to the router with the signal strength of 100%.  However, when you try to access the Internet, sometimes I can connect to Web sites, but I regularly get an Internet Explorer error message cannot connect to the internet, even if the signal is always 100%.

  Tried to go back to my WPC55AG and not to make any connection error messages.  Tried to connect to my router with my PSP and not to make any connection error messages.  Connected to another router wireless that didn't have WPA or WEP using my WPC100 and did not have any connection error messages...

  Any ideas?  Thank you!

  I changed my router settings as you suggested, with the exception of the security mode - I left it to WPA - 2 because I wanted the extra security.  It worked fine for a day, until I restarted my laptop...

  Then I tried to use your router suggested settings and set the WPA security mode and it works very well for 2 days and several reboots!

  Thank you very much for your help with this!

• WRT160NL connection with n and USB connection problem

  Hi guys,.

  I have the Linksys WRT160NL router and I have two fundamental problems with that:

  1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...

  What should I do to make it work with n as well?

  2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.

  I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.

  I don't know what to do to solve this 2 problems... Maybe someone could help me...

  Thank you

  Try changing some settings on the router wireless.

  Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.

  Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.

  Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.

• Name of the data connection with ConsoleDeviceName and CanonicalName store

  Hi people,

  I would like to connect 3 parameters, ConsoleDeviceName, CanonicalName, and 'name of the data store.

  The first two times (ConsoleDeviceName, CanonicalName) can I get with ' Get-VMHost "MyESXHost |" Get-ScsiLun.

  But how can I get the name of the data store?

  Thanks for help

  Hello

  In order to get the name of the data store for each unit number logical you should review the information of measurement of the disk for each data store attached to the host and link them using canonical names of lun. VMFS datastore disk measurement information are available in the HostScsiDiskPartition object. Here's a code example how to do this:

  $h = Get-VMhost "MyESXHost"
  
  # collect VMFS datastore name and extent cannonical names into a hashtable
  $dsLunList = @{}
  $dsView = $h | Get-Datastore | ? {$_.Type -eq "VMFS"} | Get-View
  foreach ($ds in $dsView) {
       foreach ($diskExtent in $ds.Info.Vmfs.Extent) {
            $dsLunList[http://$diskExtent.DiskName|http://$diskExtent.DiskName] = $ds.Info.Name
       }
  } 
  
  #populate datastore name for each lun if available
  $lunList = @()
  $h | Get-ScsiLun | % {
       $lun = "" | select ConsoleDeviceName, CanonicalName, DatastoreName
       $lun.ConsoleDeviceName = $_.ConsoleDeviceName
       $lun.CanonicalName = $_.CanonicalName
  
       if ($dsLunList.ContainsKey($_.CanonicalName)) {
            $lun.DatastoreName = $dsLunList[http://$_.CanonicalName|http://$_.CanonicalName]
       }
  
       $lunList += $lun
  }
  
  $lunList
  

  Kind regards

  Yasen

• Xbox 360 wireless controller is not connecting with receiver and pc

  I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Connection with PC and TV problems

  I have attached my Dell windows 7 PC via HDMI to my TV.  They do not communicate.  How do I please you?

  First step, if you don't already, is to tell your computer what to do with the other on-screen.  For example, do you want to simply reproduce what you already see on your main screen, or do you want it behaves as a second monitor that you can drag windows on to and have an additional screen (rather than just a copy)?

  To make your choice, follow these steps:

  1. Right click on the desktop and go to the resolution
  2. Click the detection analysis for additional views that are attached
  3. Choose the mode (duplicate or extend) and click on apply

• 8600 does not connect with mac and airport

  I use my Mac with airport wireless, the 8600 pro printer, will not be configured to use this, what can I do

  Hey, Dean.

  Thanks for your help. When I installed the Lion operating system, all this worked, the printer picked up the signal and works.

  Once again, thank you.

• Firefox Web sites don't display properly or to connect with websites and instead shows an error on the certificates.

  due to the fact that download a picture takes forever and I don't have time so that it ends before that my beard gray, I have provided links to the screenshots instead.

  https://gyazo.com/239be705c99a4aa7febcce6932c9e7f0

  https://gyazo.com/6a8d36aaae1da4b56a193b0940b2fc8c

  I tried all the stuff in your store and none of them worked, relocation/delete/reset etc nothing works at all the. It's still messed up.

  Thanks for the follow-up - help the steps in http://support.eset.com/kb3126/ ?

• Wireless connection with XP and boot camp on a Macbook pro - help

  MacBook pro with Snowleopard.

  Windows XP is installed (with service pack 2).
  Boot camp works.
  ' T do the wireless / internet.
  Can you give me a step by step that works?

  Hello

  • It worked before?
  • What were the changes made before the issue occur?
  • What is you receive the exact error message?
  You can check these links:
  Step 1:
  http://support.Microsoft.com/kb/870702
   
  Step 2:
  http://support.Microsoft.com/kb/313242

• Connect with Muse and Business Catalyst?

  I'm building a Muse/Business Catalyst site to a pharmacy that requires a customer return, log. No idea how to get account only? Thank you! Best regards, Peter

  Hello

  Please take a look at the following thread,

  Adding a box protected on my Muse site

  Let me know if you have any question.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• cannot connect with facebook

  I I open avast account and click on connect with facebook and not out to connect and other sites also.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.