Pilot for missing SM Bus controller after the clean install

Similar Questions

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• New R13 - R7 - 372T: Tools missing after the clean install

  Hello!

  I got my R13 - R7 - 372T today and I want to do a clean install of Windows 10. I checked the Acer site and saw that most of the drivers are available on the download page, I also found the abApps (Portal of Acer and) download ( https://www.cloud.acer.com/ops/downloads) where I need those who one day but its seems that some of the pre-installed tools/applications are missing. How can I reinstall the following tools if I wipe my device? (I have already created a backup of the recovery partition but I need regular installation files):

  -Acer care center (edit: I found a link for verification of compatibility to download it here: http://www.acer.com/ac/en/MY/content/software-acer-care-center )

  -Acer Hover access (edit: found the link for flight stationary access here: http://go.acer.com/?id=18022#_ga=1.267060686.114307318.1458377954 but not sure of the version)

  -Dolby X 2 Audio Windows App

  -Acer Audio utility invert (makes that actually do?)

  I'm a little disappointed that Acer does not offer those by convenient download as the rest of the drivers and application of quick access for example. So where can I download those, or how I at least check out them of the recovery media that I created?

  Edit: Looks like after some experiences of most of the tools I mentioned is unnecessary (so I removed them from the list) or available by searching around for a while. However the 2 above mentioned utilities are still missing.

  Thank you!

  Alex

  Dolby

  Go to Manager of device/Audio inputs and outputs / RealTek High Definition Audio speakers / right click and uninstall.

  Go to C:/drivers/setup and install. Otherwise it

  Audio

  Realtek

  Audio driver

  6.0.1.7288

  386,0 MB

  04/11/2014

  Download

  Don't restart yet.

  Go to PCEE4/Dolby Home Theater / double click and install/reboot.

  Audio Acer utility to invert

  I don't know what it is. Nobody seems to know.

• After the clean install kernel panic

  Hey people,

  Gone through these forums for a good while but the first assignment in time...

  Small story is that I have a macbook pro 2010 mid runs the mavericks, 8 GB ram, 1 TB SSHD. My mac suddenly rebooted and then got stuck in a reboot loop, screen display multilingual "your computer restarted because of a problem", I understand that this is a possible kernel panic.

  After much tinkering, I did a clean install of Mavericks on my player (I did a few times before) and now my mac still restarts regularly... the last crash report is less to...

  Thanks to everyone who has all the answers!

  Anonymous UUID: 18795270-0A64-9C43-DC5A-D2621405E611

  Mar 23 11:35:16 Feb 2016

  panic (cpu 0 0xffffff80032526cf appellant): "an element of the liberated area has been changed: expected 0xdeadbeefdeadbeef but found 0xdeadbeebdeadbeef, wicks 0 400000000 changed x, 8192 2704 offset in the area: buf.8192"@/SourceCache/xnu/xnu-2422.115.4/osfmk/kern/zalloc.c:461.

  Backtrace (CPU 0), frame: return address

  0xffffff81050d3480: 0xffffff8003222f79

  0xffffff81050d3500: 0xffffff80032526cf

  0xffffff81050d3560: 0xffffff8003251dc9

  0xffffff81050d3660: 0xffffff80033c8daa

  0xffffff81050d36c0: 0xffffff80033c879b

  0xffffff81050d3790: 0xffffff80033c7a61

  0xffffff81050d37d0: 0xffffff80033c7c37

  0xffffff81050d37f0: 0xffffff80035584b2

  0xffffff81050d3850: 0xffffff80035942dc

  0xffffff81050d3870: 0xffffff8003595303

  0xffffff81050d3910: 0xffffff8003591455

  0xffffff81050d3a20: 0xffffff800355ddc0

  0xffffff81050d3bb0: 0xffffff800355711f

  0xffffff81050d3da0: 0xffffff80033fff0c

  0xffffff81050d3e50: 0xffffff80033edc36

  0xffffff81050d3f50: 0xffffff8003640c63

  0xffffff81050d3fb0: 0xffffff80032f4176

  Corresponding to the current thread BSD process name: mds

  Mac OS version:

  13F34

  Kernel version:

  13.4.0 Darwin kernel version: Sun Aug 17 19:50:11 CDT 2014; root:XNU-2422.115.4~1/RELEASE_X86_64

  Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0

  Slide kernel: 0 x 0000000003000000

  Text of core base: 0xffffff8003200000

  Name of system model: MacBookPro7, 1 (Mac-F222BEC8)

  Availability of the system in nanoseconds: 61740424811

  last load kext to 13925356367: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f8477f000 size 32768)

  kexts responsible:

  com.apple.driver.AudioAUUC 1.60

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 100.14.34

  3.5.13 com.apple.driver.AppleUpstreamUserClient

  com.apple.iokit.IOBluetoothSerialManager 4.2.7f3

  8.2.4 com.apple.GeForceTesla

  com.apple.nvidia.NVDAStartup 8.2.6

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4

  com.apple.driver.AppleHDA 2.6.3f4

  com.apple.driver.AppleMikeyDriver 2.6.3f4

  com.apple.driver.AppleSMCLMU 2.0.4d1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.iokit.IOUserEthernet 1.0.0d1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleLPC 1.7.0

  com.apple.iokit.IOBluetoothUSBDFU 4.2.7f3

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3

  com.apple.driver.AppleMuxControl 3.6.22

  com.apple.driver.AppleBacklight 170.4.11

  com.apple.driver.AppleMCCSControl 1.2.5

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleUSBTCButtons 240.2

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

  com.apple.BootCache 35

  com.apple.driver.AppleIRController 325.7

  com.apple.driver.AppleUSBTCKeyEventDriver 240.2

  com.apple.driver.AppleUSBTCKeyboard 240.2

  com.apple.driver.AppleUSBCardReader 3.4.1

  com.apple.driver.XsanFilter 404

  com.apple.iokit.SCSITaskUserClient 3.6.7

  com.apple.iokit.IOAHCIBlockStorage 2.6.0

  com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2

  com.apple.driver.AirPort.Brcm4331 700.20.22

  com.apple.driver.AppleUSBHub 683.4.0

  com.apple.driver.AppleFWOHCI 5.0.2

  com.apple.driver.AppleAHCIPort 3.0.5

  com.apple.driver.AppleUSBOHCI 656.4.1

  com.apple.driver.AppleUSBEHCI 660.4.0

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIBut

  Model: MacBookPro7, 1, MBP71.0039.B0E of BootROM, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, MSC 1.62f7

  Graphics card: NVIDIA GeForce 320 M, NVIDIA GeForce 320 M, PCI, 256 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)

  Bluetooth: Version 4.2.7f3 14616, 3 services, 23 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: ST1000LM014-1EJ164, 1 TB

  Serial ATA Device: HL-DT-ST DVD - RW GS23N

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Apple keyboard / Trackpad

  Bus crush: k

  panic (cpu 0 0xffffff80032526cf appellant): "an element of the liberated area has been changed: expected 0xdeadbeefdeadbeef but found 0xdeadbeebdeadbeef, wicks 0 400000000 changed x, 8192 2704 offset in the area: buf.8192"@/SourceCache/xnu/xnu-2422.115.4/osfmk/kern/zalloc.c:461.

  expected 0xdeadbeefdeadbeef

  but found 0xdeadbeebdeadbeef

  Very likely bad RAM.

  Contact the company that provided your RAM upgrade and get them to replace your RAM.

  Within the forum, Curcial.com and MacSales.com (OWC) are the most recommended, for quality of RAM provided Mac and customer support should something go wrong.

• After the clean install 2 drivers required

  HP Mini 1151 PC NR
  SN: {removed privacy}
  P/N NM123UA #ABA

  I had to do a clean install of Windows XP, now updated to SP3, but the 2 drivers are missing.
  SM Bus controller.
  Webcam-101.

  I have looked on "support.hp.com" for these drivers, but can not find them.

  Could you please give me the correct address to find these drivers?

  Hello

  Download and install the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp42001-42500/sp42295.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• HP pavilion dv 6-2070eo: unknown unit in the device after the clean install Manager

  My product: HP Pavilion DV 6-2070eo

  Product number: VJ346EA #UUW

  Windows 7 Home premium 64-bit

  Hi HP experts...

  I just did a clean install of windows and installed all the drivers - installed Microsoft security essentials - windows update updates entirely, but in Device Manager it is a unknown unit with a yellow icon. When I double click on the unknown unit, it says location on bridge isa standard pci and beneith which - drivers for this device are not installed (code 28). What kind of driver I'm missing? Now, I wanted to check for other drivers, but I couldn't find any other drivers because the driver download page are not available at the moment on the site of HP

  Best regards hpenvy1

  Hello:

  Yes, that's what I needed.

  You need the driver for this device...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_79533_2

  You don't need to worry about the EEG W10 icon.

  You can download W10 directly from Microsoft.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Download the 64-bit installation program and do the immediate upgrade option.

  Then you can go back and make the W10 DVD or USB flash drive.

  I'm not very confident that your laptop can run W10.

  Most likely, audio, graphics and without wire do not work and there is no drivers to make them work.

  But you can give it a shot and see what happens.

• Windows 7 does not connect to the internet after the clean install

  I did a clean install on my Windows 7 computer, but means doing so my computer not connect to internet more that connection drivers were lost. I'm going back between Web sites up-to-date, but without success. I someone could direct me to the link with the appropriate driver if I give you my ibs material?

  If you purchased your computer with Windows 7 preinstalled, the computer or the manufacturer of the laptop computer uses drivers for it.

  If you have installed Windows 7, you can always go and find Windows 7 drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  Examples.

  Dell drivers:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  HP drivers:

  http://WWW8.HP.com/us/en/drivers.html

  Drivers Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  See you soon

• How to get the software HP Coolsense works again after the clean install (win7)?

  I recently purchased a DV7 6014TX and upgraded to an SSD and a clean install of the retail version of windows 7 64-bit. I want to know how do HP Coolsense works again? I saved the folder drivers of my original hard drive SW and I so all people. SP52814, I downloaded the installer coolsense, but it doesn't seem to work. Any input on this would be highly appreciated.

  Coolsense also requires HP Support Assistant see links below

  HP Notebook PC - on CoolSense technology

  Download

  HP Support Assistant

• Satellite L650 - unable to connect to the internet after the clean install of Windows 7

  Hi guys

  IM really angry because I just finished installing a new copy of w7 on my laptop (upgrade home pemium to proffesional) and now the ONLY way I can connect to the internet is via a usb device.

  I even tried ethernet and no luck.
  The screen display resolution is also mucked up.
  What can I do?

  Also reset it to factory settings make me reinstall it home premium?
  If so I'll do that but I need to know if this is the case, please

  its a PSK1JE L650 btw

  Post edited by: bilal98

  > I tried Ethernet and no luck.
  > The screen resolution is also mucked up.
  > What can I do?

  You must install the necessary drivers.
  For internet connection, you will need to install the LAN and WLan driver.
  To get the best display resolution install display driver

  > Also reseting it to the factory settings let me reinstall it home premium?
  > If so I'll do that but I need to know if it does, thank you

  Looks like you have already done this as posted here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031

• 7.0 Firefox crashes at startup (including safe mode) as a standard in Windows XP SP3, even after the clean install user

  Hi all

  I need help. 7.0 FF crashes at startup / launch every time, even in safe mode of Windows XP.

  I've initially automatically upgraded to version 7.0 the FF of the version the latest version 6. This automatic installation crashed, then I downloaded again v7.0.

  I uninstalled my existing installation of FF6, including personal settings and ran Setup v7.0. He appeared to install successfully, but crashes at launch. I repeated this process several times with the operating system restarts without success.

  I also ran FF in safe mode of Windows XP, but have experienced the same crash at the launch of the application. FF now display only the 'Crash Reporter'.

  Reminder:

  • I am running Windows XP Pro SP3 on a computer.
  • The machine is on Tivoli Access Manager (but I choose not to use it)
  • I ran a scan anti-virus AVG Free with no result.
  • I did a scan of MalwareBytes Anti Malware. An infection was detected (since corrected) as follows:

  Infected registry data items:
  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\SystemRestore\DisableConfig (Windows.Tool.Disabled)

  Please let me know if you need more information.

  Any help would be greatly appreciated. Thank you.

  ========

  Crash IDs:

  • Crash ID: bp-5597bbcc-ba4d-4d09-ba9e-2da392110928
  • Crash ID: bp-da02239d-c951-4aaa-8b47-ec5922110928
  • Crash ID: bp-3adc8e1e-f5ea-47dd-8b20-089a82110928

  If you completely stop Tivoli, will launch FF 7?
  Tivoli is based on the same code as Passlogix v - GO. If it does not work (even paused), it causes a conflict. The purpose of assistance of Mozilla is at the origin of the conflict.

  I'm curious to know if the reg key parameters are the same as the post above Associates

  The "reg" shift key is probably set your field of business via GPO that prevents you to configure system restore settings. Probably not an "infection" but MalwareBytes can pick it up as a false positve.

• Restore the backup after the clean install

  I used windows backup on a hard drive, external, made a new installation on pc now want to restore my files but backup & restore will not do as it says that there has been no backup on this pc. How can I restore my backup files?

  Hello

  Did you follow this Information on how to restore your backed up files?

  http://www.vista4beginners.com/how-to-restore-files

  And it is to know how to restore a backup of the computer, if that's what you mean:

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  See you soon.

• Threats of virus after a clean install... where is the 'old machine' file?

  My PC has a virus; My anti virus would not repair it... After doing a clean install of Windows XP, I remember reading that I can delete a file named 'old machine' if the new installation worked. I installed Microsoft Security Essentials... For 3 days, everything worked was great until this evening...

  Tonight, I ran an update of virus definitions and then run the 'full' scan Microsoft Security Essentials has notified me that I had a few threats. There was also a warning on a temporary file and asked if I wanted to send it to Microsoft I did...
  I am trying to be proactive and prevention viruses take over this machine again... I remembered reading after installation 'own' that I should remove the file 'old Machine' if the computer works well after the clean install? .. .also had a warning on a temporary file.
  Any idea where I can find the 'old machine' file; (I thought the clean install would remove all)... I did a search on my computer and come with nothing
  Help, please!...

  Hello

  Step 1: You can remove it in c:/Windows. With the help of old cleaning disc.

  In the disk cleanup, select the previous installation of windows. Put a check mark to remove it.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2: Run a virus scan to make sure that the computer is Virus-free:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  For more information:

  The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer

  http://support.Microsoft.com/kb/812248

  It will be useful.

• Missing or corrupt files after the installation of the SP3 for XP PRO

  Norton Anti virus history shows no deletions of these files.

  * original title - I have missing files or damaged after the installation of the SP3 for XP PRO. These are files of driver for my DVD player and Camera.Specifically [dcptp.sys] can not be consulted online *.

  And have you tried to reinstall the DVD software & camera?

  Why SP3 was installed years ago?

  Currently, the computer is fully patched to Windows Update?

  ==========================

  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices and network connections may not display network connections after installing Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  Hello

  I missed the path JDK8 for Mobile Application Framework (MAF) after the reboot of the JDeveloper... How can I fix this JDK8 path?

  When you try and create a new application of MAF it will prompt you to insert the path JDK8.

• HP Pavilion P7 missing SM Bus Controller Driver WIN 7 Ultimate 64 Bit

  I just replaced a HARD death drive in my Pavilion P7 (1246, c) and after the installation of Win 7 Ultimate 64-bit and the drivers, Device Manager indicates that the SM Bus controller has no driver installed. There is also no sound. I think that this desktop pc Chipset Intel H61. Help please!

  I found the driver chipset... Intel has moved the to a different category chipset drivers. SOLVED