Pilot network of Lenovo S10 - 2 WirelessLan (Broadcom) for Windows 7 32/64-bit and Cisco PEAP

Similar Questions

• Need to Broadcom Bluetooth driver for windows 8.1 64-bit

  I updated my computer laptop original windows 7 64-bit to 64-bit windows 8 then recently updated to 8.1 windows 64-bit. I had the Broadcom Bluetooth driver for windows 8 64-bit [version 12.0.0.6950 K rev.] installed, but now I can't find same drivers for windows 8.1 64-bit. Page of drivers of my hp laptop is not the specific driver. Please tell me if there is a driver for windows 8.1 64-bit

  Hello:

  See if it works...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132616_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

  It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

  I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

  Thanks for your help.

  Thank you for your help.

  The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
  The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
  Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
  I would like your ideas on the potential problem of Windows 7 found on Google.
  Thanks again for your help.
  Bill

• Sir my network smart vaio does NOT start after installing windows 7 ultimate 64 bit

  Sir accidentally my real Home Basic 64-bit is formatted when installing Ubuntu 13.04 in a separate disk.

  I have no backup to restore the window as recovery is also formatted.

  I installed windows 7 ultimate 64 bit and all drivers related to it is on th website:-http://www.sony.co.in/support/product/sve15115en/download

  including the original software and driver patches.

  but after that my network manager smart vaio does not work its present only in the menu start when I clicked it nothing happens.it nevers opens.

  Please help me

  do a system restore disc. contact https://www.sony.co.in/section/contactus

• 600 g MT: network driver for HP600B MT for Windows Server 2008 64 bit

  I installed Windows Server 2008 on computer HP 600 g MT (product number - B5G17EA). But I'm not able to get the network (Ethernet) and graphics drivers for this OS. I even tried to download and install the drivers for Windows 7 and 8. But that did not help.

  The HP site doesn't have any drivers for this desktop computer operating system:

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5270873&lang=en&cc=us

  Driver search for "Atheros AR8152 / 8158 PCI-E Fast Ethernet Controller (NDIS 6.20) also went in vain I couldn't locate for OS Windows Server 2008 (64-bit)."

  Please help!

  Hi Provost,

  Thanks for the reply. I downloaded the Ethernet drivers from the following link:

  http://www.driverscape.com/download/Atheros-ar8152-8158-PCI-e-fast-Ethernet-controller-%28ndis-6.20%29

  And it worked perfectly for me. I had another system (HP 600 g MT). I went to the Device Manager and checked the name of the Ethernet adapter. It is Atheros AR8152 / 8158 PCI-E Fast Ethernet Controller (NDIS 6.20). Then I googled and found the link above was the driver.

  The graphics driver from the link you provided, I always download it now. Would return as soon as possible about that.

  Best regards

• Lenovo G505s energy for windows 8.1 64-bit management

  Looking for new wersion for power management g505s. On the drivers download page is only for win 7 and 8

  http://mobilesupport.Lenovo.com/pl/PL/products/laptops-and-netbooks/Lenovo-g-series-laptops/LENOVO-g...

  Looks like that is working.sad there is no driver or BIOS update.catalyst are 14.4.on lenovo driver download page 13.2.

• Windows 7 Ultimate 64-bit networking with XP 32 bit systems

  I am an amateur to networking, so this is. Recently I bought Windows 7 ultimate 64-bit, and I want to do networking with XP SP3 32 bit. How can I do this? I have tried, (which I seem to find,) responses on the knowledge base, but nothing is. I would like to be able to file and to print between 2 machines share. The64-bit Windows 7 Ultimate machine is wireless and XP SP3 32-bit machine is connected directly to a modem. I have a Linksys WRT54G Router-v4, and the wireless, it's what Dell provided for me on the new machine. Someone at - it any help? Thank you

  Please repost in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pilot network for M58 - 9960

  Today, I have acquired a 9960 M58 quad core. It doesn't have an operating system, but it has a license for Windows 7. The installation went well except that the ethernet port is not recognized after I downloaded and installed the drivers from Lenovo. The report of pilots as being installed correctly, but Device Manager reports error 10, what the device fails to start.

  The built-in Ethernet port is enabled in the BIOS. The drivers for the chipset are installed. The computer acts as if the Ethernet port is bad, but the computer was extracted by a very competent repairer. Of course, it could be bad, but this is my last option.

  Am I missing? Is there something special about this computer or Windows 7? Uninstalling the driver and restarting the computer caused the driver to be reinstalled, but the port still does not work. The lights do not light when the network cable is connect. (The network cable works because I connected to another computer. In addition, I connected this cable to another computer, and he worked there.)

  I installed Windows on at least 1000 computers literally. Obviously, acting like a bad port. However, sometimes things change (for example the AHCI), so I hope someone can tell me what could be the problem.

  If the ethernet connection is activated, and the LED lights when you plug something in, then it is most likely have some hardware problems.

• Lenovo S10 and Lenovo S10e leather covers

  Howdy

  It's completely superficial, but never the less something I hope you know the answer to

  The leather for the Lenovo S10 book covers fit the Lenovo S10e

  Drag them on the covers are great, but I want a style of easier access and business

  So far, I have not found discussions on this topic

  Thanks in advance

  Kit

  Yes, they do.

  Same chassis.

• Upgrading processor on Lenovo S10-3?

  Hi, I can switch the processor on my Lenovo S10-3? I think that with the slow Intel Atom N455 for my Windows 7 Home Premium... And I'm going to upgrade my processor to the Intel Atom N570, is it possible?

  No, there is no way that you can change easily, he need to desolder and solder again to get the new one, but it's quite difficult to do for those without experience. So it is absolutely impossible, and despite this it would not be much difference between these 2

• driver Ethernet and network for «Windows lenovo xp 7 style 2010»

  Hello

  I have a lenovo 3000 N200 & recently upgraded to Windows lenovo xp 7 style 2010

  but now his LAN does not work; Device Manager indicates that it can not install the driver ethernet & network

  how it can be fixed?

  concerning

  Finally, it has been resolved after several uninstallation / installation of device drivers and restart windows!

• Lenovo S10 - t3 Mutli touch problem

  Hello Forum, I recently purchased the lenovo S10 - t3, but I just found out that windows 7 Starter, does not support multi-touch, is it true? or is there a way around it? or what I need to spend MORE money to upgrade to a higher version of windows 7?

  I was not told this when I bought it...
  Figures...

  Lenovo should sell this laptop with a newer version of windows 7 to this topic, what's the point to sell a laptop which has multi touch, when you can't even use...

  Anyway, any help would be appreciated =)

  When I buy the update how I install it without a hard drive?
  or it upgrades it directly from windows without having to start from the beginning to the top?

  EDIT: upgraded already, I used windows anytime upgrade. =)

  Now, the lenovo s10 - t3 is amazing!, geezsus anyone who has the Lenovo s10 - t3
  upgrade from windows 7 starter edition to something more, it's so much better this small laptop

• Lenovo S10-3 rescue key and quick start

  Hello guys,.

  I'm using lenovo s10-3 netbook. I installed a key recovery software but my spare key a button works.

  Even as my button quick start is also in the works.

  I think that I do not have the correct program or maybe I don't know how to install it.

  Please help me.

  better communicate with the lenovo support line and ship your laptop in return.

  at this point, I don't think we can help, technical support will probably reset your hard drive by default.

  (they can charge you)

• Lenovo s10 - 3T bios bug?

  I recently bought a lenovo s10 - 3T and bios update after another comes out. However, it still favours bios password after I successfully updateing. I have not set up a password for the bios and it seems a bug in the bios for this model?

  It seems that I had similar problem withi this post but I don't have a error check biso.

  http://Forum.Lenovo.com/T5/IdeaPad-S-series-netbooks/S10-3T-BIOS-bug/m-p/334965

  Anyone who has a clue how to reset or enter the bios?

  Thank you.

  @flyingstore,

  Please contact the service center because they will have a fix for this problem, I sent you a PM explaining more on this subject. Check your PM.

  JMT

• pilot network dv6 - 7300st windows 7

  I recently move my OS to windows 7 and I could not find driver for windows 7 and many other drivers network as well but

  import of most is this network driver to connect to the internet.

  Product model: Hp Envy dv6 - 7300st

  No idea how I can find the driver?

  Thank you...

  Hello

  Thanks for the details of the product number.

  Please find the link that will give you support for the computer information laptop dv6 - 7300 HP ENVY st below.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategorytmp_task=prodinfoCategory&CC=tr&DLC=en&LC=en&product=5364169

  Link for the drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5364169

  If you weren't able to find the information required with the link above. Please let us know, if the device was shipped with Windows 8 Windows 7 downgrade option. If yes then try to use the drivers CD to install the driver appropriate for your device.

  You can also provide us with the hardware ID of the network device to help you with the driver.

  Go to Device Manager and click on the base system device. Then click on the Details tab. In the property drop-down list, select the second element (Hardware ID).

  After the first string of characters you see in the window. With these ID type and model of the device and I will send you the link to the drivers you need.

  I hope this helps.