Pinnacle has audio L & R... How to convert 1 stereo for first use

Similar Questions

• How to convert AVI files for first CS4 (Mac) with VLC - Please Help!

  Hi thanks for the reading-post it here for the first time.

  I'm another grass sorry, trying to convert AVI files, so I can import them into first CS4 on a Macbook Pro laptop. I am using VLC on the macbook to perform the conversion. I don't want to use free converters such as iSquint (tried and many others) b/c they cause a significant loss of video quality. But I'm trying to do it for free! (I'm broke).

  Been read tons here and on other forums to get advice first, but in my view, none is really specific to my situation.

  I'm fine (slight quality loss) video but NO Audio. I want the audio too!

  AVI files seized on an old NV3 camera SD card.

  VLC said the Codecs for these files I got off the SD card are as follows:
  0 workflow:
  Type - video
  Codec - MPEG - 4 (XVID) video
  Resolution - 640 x 480
  Rate - 30

  Stream 1:
  Type - Audio
  Codec-MS ADPCM (audio ms)
  Channels: Mono
  Sampling frequency - 22050 Hz
  Bits per sample - 16

  I tried several different configurations with VLC conversion according to the documentation of "Supported file Formats for import in first CS4": http://help.Adobe.com/en_US/PremierePro/4.0/WSf52ca809ac8f6c7135876f961243120b72d-8000.htm l

  For example I tried to convert the same file as follows:

  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 192-bit
  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/Audio MP3 128-bit
  Wrapper MPEG 1 - converted with MPEG-1 VIDEO 1024 bits/MPEG Audio 128-bit
  Wrapper MPEG 1 - converted with MPEG-2 VID 1024 bits/Audio MP3 128-bit
  Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MPEG Audio 16 bit VID
  Wrapper MPEG 1 - converted with MPEG - 1 1024 bits/MP3 Audio 16 bit VID
  
  When converting to MP4 (MPEG-4) I get a general error while importing first so no dice on that, and I tried a lot of other configurations/combinations, but not all. 

  I check each result with VLC before import into the Prime Minister and they play both audio & video fine with VLC.

  My question is the following: what settings can I select in VLC for audio first? Or if there is a specific codec I need to download and install a download link... would be much appreciated.

  Alternative solution?...

  If I put these files on the SD card in my camera and click on and drag them on the macbook pro laptop as AVI files (instead of dragging to a PC first, as was the case)... don't you think it would make a diff?  Also, I tried sucking to the top of the camera first, but that didn't work... the camera turns on when connected to the computer... so that you can not navigate to a file on the camera and then use the GUI first to suck.

  I have a laptop. These original files play well with Windows Movie Maker because I downloaded the appropriate codec. Hi and low tried a mac version of this codec without result. CS4 my install discs do not work on Windows/PC. Trust me I wish they did! Even the configuration required on the package is in the absence of any mention of Windows. Windows Movie Maker convert .mov... that was my first game b4 plan, I realized that VLC was quite robust and user-friendly in its Export Wizard codec functionality.

  Any help would be much appreciated! I swear! I'm banging my head against the wall and I want to just change already!

  Thank you!

  Do not use the flow function; This isn't what you are doing.  (Although technically, I don't think it matters)

  Use the convert/save option.  The first screening, video - H.264 + AAC (MP4), should work great.  Don't change anything.  Save the file with a MOV or MP4 extension.

  If you get audio weird sounding, then create your own preset that matches the Video - H.264 + AAC (MP4) preset, uncheck only Audio the Audio tab and convert to video.  Then run convert/Save using the Audio - CD preset.  Save the file as a WAV (or an AAC?).

  Import the 2 files into PR.  You shouldn't have synchronization problems if the points are aligned in when you add them to the sequence.

  -Jeff

• How can I get content for first pro? I need models of titles for CC

  How can I get content for first pro? I need models of titles for CC.

  Hi Jerry,

  Please check the below link for the same.

  Missing library, the models, the models of project in Adobe products

  Vinay

• How to convert a stereo audio chanel in mono?

  Hello

  I have to work on a project of CS5 with stereo audio in the timeline panel (and it is too late to import it back the file and choose to split the mono 2 stereo). On chanel, left, I have no sound and on chanel R. If I put the command of IBC, on the left, how to assign right AND left in the master? How to convert a mono 2 stereo audio file in hearing?

  Thanks for your help,

  Olivier Madar

  Use the left or right audio effects fill fill, depending on which channel contains the audio you want to duplicate. You can use these effects to the clip level, since the effects bin, or you can select and use them in the stack of effects in the mixer Audio Panel for a particular track. The video effects allow you to isolate individual items, of course, while track effects will affect the entire track.

• Since the upgrade to CS6, I see is no longer how to convert files from, for example, a PDF to JPEG and vice versa.  It used to be so simple.  Can anyone help with this?

  Since the upgrade to CS6, I say is no longer how do to convert files from, for example, a PDF file as a JPEG or another type (gif, png, etc.).  When I look at the file in the Finder it simply brings me directly to my original in inDesign document, rather than to appear on the left side of the screen with the save option under sub folder as it did before.  Does anyone know how I can convert the files, I need to do a lot!

  ???? Conversion of files with InDesign? Never have been possible. The only thing you could and can do is to export an InDesign document. You can export to PDF, jpg, etc. just like before.

• How to convert. DFIS to PDF using Adobe Output Designer

  Hi all

  I'm new to "Adobe output Designer. Could you please guide me how to convert .ifd files to .pdf format.

  Thanks in advance...

  Hello

  The .ifd is the design of simple model. You save the .ifd file. This model can be compiled with different objectives of presentation. Go File-> objectives of the presentation

  By choosing the target pdf presentation, you can compile your model in pdf. Now when you merge this with your data file a pdf file will be produced. You should spesify a folder to put your pdf file using e - z parameter in line of your project. If you now want to send this PDF as an attachment to the mail you will also need to spesify where to look for the file that is the same folder.

  You job line should then look like this:

  [[↑ EMPLOYMENT [model name] - z... \pdf\[file name] .pdf - emuser = [email account for the user] - OTEM = to emsub-= SUBJECT - emtext = [text]... \pdf\[file name] .pdf - afxon

  In order to avoid that the files in the \pdf folder will be replaced, you can use the u parameter to create a unique name like this z... \pdf\u.pdf

  Variables to and OBJECT can be populated in your data file

  Hope this helps

  Ståle

• How to call JavaScript/ExtendScript for first Pro CC Mac OS

  Looking for a way to run JavaScript aka ExtendScript in first Pro CC

  Here's what I have for other applications Adobe, using AppleScript:

  tell application "Adobe After Effects CC 2015"
    activate
    set SomeExtendScript to "ThisVariable='Runs This Js Code';"
    DoScript SomeExtendScript
  end tell
  
  
  tell application "Adobe Photoshop CC 2015.5"
    activate
    set SomeExtendScript to "ThisVariable='Runs This Js Code';"
    do javascript SomeExtendScript
  end tell
  
  
  tell application "Adobe Illustrator"
    activate
    set SomeExtendScript to "ThisVariable='Runs This Js Code';"
    do javascript SomeExtendScript
  end tell
  

  But so far nothing for first.

  tell application "Adobe Premiere Pro CC 2015"
    activate
    set SomeExtendScript to "ThisVariable='Runs This Js Code';"
    -- Does not work: DoScript SomeExtendScript
    -- Does not work: do javascript SomeExtendScript
    -- Does not work: do script SomeExtendScript
  end tell
  

  ExtendScript = JavaScript Adobe-flavored. Very similar.

  For other products Adobe AppleScript has been the key to do this.

  Yes, but there is no need to limit your solution to a single platform!

  I'd be curious to see what you do in AE.

  Instead of trigger ExtendScript some system based on external data, you can put the buttons in a panel of HTML5 (JavaScript based) for convenience of the user.

  Here is an example of PProPanel; other samples in the repository prettier HTML and use modern web frameworks; PProPanel is quite comprehensive in the use of agency ExtendScript API:

  Samples/PProPanel to master · Adobe-CEP/Samples · GitHub
  Pushing metadata to projectItems PProPanel = shows how to get the static value (metadata Panel) and temporal metadata (marker).

  Here is "how to set up a panel dev environment:

  Samples/ReadMe.md to master · Adobe-CEP/Samples · GitHub

  Work in the readme file, play with the sample and feel free to ask me anything!

• How to make a newsletter for mail using Muse?

  Hi, I m a novel in Muse. I need to publish a page as a body of a mail. It's just an electronic newsletter, but of course, I don't know how to convert my page design in an image. Can someone help me?

  This is not possible with Muse. HTML email using HTML, Muse makes heavy use of java script.

• How to create the ADC for first name

  Hello

  I have the situation here, I need display the default in the e-mail (Dear) when the value in the first name field is less than 2 characters long or it is empty. Otherwise, I need to insert the value of the field name (Dear John).

  Please let me know how to create an ADC for this.

  Thank you

  Rama

  Use wildcards for searching.

  ? = any 1 character

  * = 0 or any number of characters

  In order to find people with more than 2 characters in this area?: *

  Then, build your default rule to merge the content in case they encounter more rule of character 2.

• What file format can I convert AVCHD to for first?

  With the help of Aunsoft MTS Converter to convert my AVCHD files but have NO IDEA where to start with the selection of a format. There are some parameters of the first, but there are options (quality, medium, high, etc.) and a few others. (Like Aunsoft so I can create a file among many others.)

  I am shooting in 1080 p 30 and just development of the training videos, so this isn't the stuff of Hollywood. Just try to get a nice HD, easy to change and easy to convert format.

  Can anyone recommend a default basic formula? Would be very happy!

  And you want to convert it why? First can edit AVCHD directly. Copy the entire contents of the SD card directly to the hard drive, then first, import using the functionality of the media browser, works like a charm. Maybe you have an older/more slower computer and it can't handle natively? You did not say

  Jeff Pulera

  Safe Harbor computers

• How to convert the column of ROW using DBMS_REDIFINITION object type column

  Hi all
  Suppose I have the following table to convert:

  create table customer as select customer_id cid, cust_first_name name, cust_address street from customers;
  alter table customer modify cid primary key;

  I created the table based on the customers of the OE schema table, while the street column has cust_address_typ with the following attribute object type

  SQL> describe cust_address_typ
   Name                                     Null?     Type
   ----------------------------------------------------- -------- ------------------------------------
   STREET_ADDRESS                               VARCHAR2(40)
   POSTAL_CODE                                   VARCHAR2(10)
   CITY                                        VARCHAR2(30)
   STATE_PROVINCE                               VARCHAR2(10)
   COUNTRY_ID                                   CHAR(2)

  I want to convert the object attribute adresse_rue in a column of RDM. Consider the following temporary table:

  CREATE TABLE INT_CUSTOMER(
  CID NUMBER,
  NAME VARCHAR2(30),
  street varchar2(100)
  );

  First of all, I checked if the table can be redefined:

  --Verify if the table can be redefined
  BEGIN
  DBMS_REDEFINITION.CAN_REDEF_TABLE('OE','CUSTOMER',DBMS_REDEFINITION.CONS_USE_PK);
  END;
   4  /
  
  PL/SQL procedure successfully completed.

  But when I started the redefinition, I got an error:

  BEGIN
  DBMS_REDEFINITION.START_REDEF_TABLE(
  uname => 'OE',
  orig_table => 'CUSTOMER',
  int_table => 'INT_CUSTOMER',
  col_mapping => 'CID CID, NAME NAME, STREET CUST_ADDRESS_TYP(STREET_ADDRESS)'
  );
  END;
    9  /
  BEGIN
  *
  ERROR at line 1:
  ORA-00923: FROM keyword not found where expected
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2

  What seemed to be the problem?
  
  Best regards
  Val
  
  Published by: Valerie good-natured October 9, 2011 21:43

  Have you tried this one:

  BEGIN
  DBMS_REDEFINITION.START_REDEF_TABLE(
  uname => 'OE',
  orig_table => 'CUSTOMER',
  int_table => 'INT_CUSTOMER',
  col_mapping => 'CID CID, NAME NAME,"CUSTOMER".STREET.STREET_ADDRESS STREET'
  );
  END;
  

  Looking at your trace file, I claim that when you use the call above to START_REDEF_TABLE, the inner workings of this procedure will create this SQL statement:

  select CID CID, NAME NAME,"CUSTOMER".STREET.STREET_ADDRESS STREET from "OE"."CUSTOMER" "CUSTOMER"
  

  (You can prove or disprove my claim by tracing it ;-)))

  And this statement has had an alias - even if the alias is the same as the name of the table...

• The Linux host, guest of WinXP, host has 2 network cards, how to choose which NETWORK adapter to use?

  I know it's something of an FAQ, but several hours spent on these forums and Google search gave me nothing of what works.

  All the solutions I've seen assume Windows as host and (something) as a guest.

  In my case, the host is Linux (CentOS 6.4) and invited is Windows XP.

  The host has two network cards, one on a 10.x.x.x network and the other on 192.168.x.x network.  In the guest virtual network adapter connects to the network 10.x.x.x.  I want it on 192.168.x.x network.

  I would be happy if I added another virtual network card and one of them connected to each network, but two of them connect to the 10.x.x.x network (with 10.x.x.x different IP numbers).

  The solutions I've seen indicate that under the Virtual Machine-> network adapter settings-> network connection, you click on the button "Configure the adapter" and load of come from there.  It would be great, but I have no button "Configure the adapter" or something like that.  I have a button "Advanced", but that just allows me traffic into and out of the butterfly and set a new MAC address, that's all.

  Because the host is Linux, I have also no equivalent to vmnetcfg.exe, at least none that I can find.

  So, where should I go from here?

  VMware Player is the version 6.0.0 (freshly upgraded 5.0.2 this afternoon).  I tried with version 5.0.2 and got the same thing.

  Thank you...

  Eric / www.rkt-tech.com

  You will need to use the virtual network Editor, although first you may need to create symbolic links.

  The first symbolic link already exist in a Terminal using the following command. Note: If connected a root the sudo command is not necessary when the.  Tip: Copy and paste the commands!

  ls-l/usr/lib/vmware/bin/vmware-netcfg

  If it exists, the output should be similar to the following.

  lrwxrwxrwx 1 root root 13 29 Sep 08:17 / usr/lib/vmware/bin/vmware - netcfg->/usr/lib/vmware/bin/appLoader

  At this point, you can simply use the following command to bring the virtual network Editor.

  sudo/usr/lib/vmware/bin/vmware-netcfg

  However, if you want easier access creates a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  If the symbolic link/usr/bin/vmware-netcfg does not exist, then use the following command.

  sudo ln-s/usr/lib/vmware/bin/appLoader/usr/lib/vmware/bin/vmware-netcfg

  Then, to facilitate access to create a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  To bring up the virtual network in a Terminal editor use the following command.

  sudo vmware-netcfg

  In the virtual network editor disable automatic bypass on vmnet0 by selecting the network map target in the bridge to: list box.

• How to convert a column for lines when characters available with delimiters?

  My requirement is to fill a characters that exist between certain special characters.

  But if all available NULL, which must also be taken in the same order as being available in the chain.

  The sub query returns the values in the following order, but it should display as shown in the result.

  Now, it reads as follows:

  ================

  SUB_STR N

  1 98

  2 78

  68 3

  4 34

  5 90

  6

  Expected results:

  ===========

  SUB_STR N

  1 98

  2 78
  3

  4 68

  5 34

  6 90

  I used the below query, through which I am not able to achieve.

  WITH sample_data AS

  CHOOSE '98, 78, 68, 34, 90' AS str

     FROM dual

  SELECT    LEVEL   AS N

  ,    REGEXP_SUBSTR ( str )

     , '[^,]+'

     , 1

     , LEVEL

     )   AS sub_str

  DE sample_data

  CONNECT BY   LEVEL-1   <= regexp_count(str,',')

  with qry (STR) as)

  Select ' 98, 78, 68, 34, 90' of the double

  )

  Select the level,

  RTrim (regexp_substr (str, ' [^,] *(.| $) ', 1, level), ',') ASPLIT

  of qry

  connect by level<= length="" (regexp_replace="" (str,="" '[^,]+'))="" +="">

  LEVEL	ASPLIT
  1	'98'
  2	"78".
  3	null
  4	"68".
  5	"34".
  6	"90."

• How can I access utilities for PS8250 using Snow leopard printer?

  I used my PS8250 with OS X 10.4.11 for 3 or 4 years. I access the HP photo utilities to verify supply levels, align new ink cartridges, etc.

  Now, I have a new Mac Mini with OS X 10.6.7 and I can't find my set of utilities print so I can do it. I checked HP downloads and told me that the drivers were included with Snow Leopard, and they are with the exception of the set of utilities with power level control.

  Any ideas?

  -Joe

  Unfortunately, this network configuration does not use the utility - it does not work for printers shared via another computer.

  It only works when it has a direct access to the device: printer must be connected to the network through its internal network card, if it has one, or directly to your mac via USB.

  Utility should work on your G4, if you have it installed there.

• How can I find Instructions for the use of Ctrl + F in Windows 7?

  I use Ctrl + F all the time, but lately, I'm having a problem in that the box 'Whole word' only does not appear so I can't check.  I couldn't find any kind of guide for the Ctrl + F function.  How can I locate it?

  I posted a request on their Support Forum.

  http://support.Mozilla.org/en-us/questions/941177
  ??