PIX messages

Similar Questions

• PIX log messages

  Can someone direct me to a document that explains what that 'type' and 'code' values average associated log PIX messages?

  You can search for codes on google and icmp types.

  ICMP type 3 is Destination Unreachable 1 Host Unreachable code

  See link below http://livenudefrogs.com/~anubis/icmp/

• How to turn Pix timestamp of the log messages in the buffer

  How can I activate the timestamp of the log 'stamped' PIX messages? I activated the "record timestamp" command that generates timestamps for 'syslogd' messages but my messages saved in the buffer do not have a timestamp on them.

  I'm running ver 6.2 (2) 'warnings of logging in buffered memory ".

  Rgds tony

  Unfortunately you don't have. As you have seen, the "horodateurs log" command the timestamps on the syslog messages, but still put on the console messages.

  There is a bug already open about it, CSCdu18237. No word on when it will be resolved, however.

• analyze the logs of pix

  With Websense software, we can get a very detailed report of active internet. What time, what web page that requires not only the web site in the report.

  I can get the information in the report by analyzing the pix message? I want to get not only the web site web page. For websense is very expensive.

  Unfortunately, the pix provides only the IP address and not the FULL domain name. That could change in v7.0, given that the Pix will be URL inspection capabilities.

• PIX failover message

  I've recently updated the key for activation on a PIX and now get the message:

  ========================== NOTICE =========================

  This machine has been approved as a unit of secondary failover

  but it lacks a connection to a primary PIX entirely under license.

  Please check the connection of cable to failover to the

  primary system. This machine will restart at intervals

  in its current state.

  I don't want to use failover.

  I tried to disconnect the connector of switch but no change.

  So I have two problems, 1) whenever I make a configuration change, I get the "can not sync config are you high school", but more 2) he worry about the States in the above message that the device will restart at intervals!

  Anyone know how to disable this?

  Hello

  If you do not have this key in the activation message befor Exchange, then you got the incorrect license key. This means that you downgrated a PIX entirely under license in a PIX failover. Reply to the email that you have received the key to and ask the right key. Until you get the right key, your PIX will restart every day.

  I got a bad hit some time ago, that has been disable IPSEC and updated remotely. After the restart, I had to get out there and change the key because the VPN broke down.

  Hope this helps

  Norbert

• Boring for pix failover message

  Hello

  >

  > I have two firewalls of PIX525 editing just with dynamic rollover and they

  > sewing to work properly except that I'm getting the message...

  >

  > Warning, lack of ip address or the inside interface failover

  >

  > The inside interface has an ip address and I don't want to use it for

  > failover, so why I get this message?

  >

  > I'm under 6.3.4

  Hello

  When you set up failover, you must assign each ip address, interfacean @,.

  When you assign an ip @ to a failover interface, the pix continues to display decreasing message. It assumes that there is an error.

  If you must give to each interface of your pix failover ip @.

  failover ip inside everything that...

  hope this helps.

• Error message from Debug ISAKMP tunnel on PIX

  I configured a Linksys VPN router and a PIX as site to site.

  When I run the cry of debugging on the PIX commands, I always get the following message is displayed:

  «ISAKMP (0): Config Mode Request retransmission...» »

  I searched the site of Cisco and the Web and can not find something definitive as to what is causing my error.

  When I do a ' sh isa his ' on the PIX, I get the following:

  State = OAK_CONF_ADDR, but I can't reference that is.

  What are these debugging output tell me?

  THX

  When the configuration of IPSec with other than Cisco devices, always cut xauth (add the No.-xauth command)

  change the specification isakmp key command

  ISAKMP key your_key address your_address No.-xauth

  M.

  Hope that helps rateif it does

• How to block applications from Instant Messaging (socks Protocol) on my pix 515

  I would like to block all traffic application instant messaging on my pix 515. Some of them use the socks Protocol. Can someone help me to block these applications or SOCKS protocol on my pix 515?

  Concerning

  It was just answered by a thread below.

  MSN_Messenger_tcp tcp service object-group

  Description MSN Messenger tries to use these ports

  port-object eq www

  port-object eq 1863

  object-port 7001 eq

  the MSN_Messenger_hosts object-group network

  host Description MSN Messenger feeds

  object-network 65.54.195.0 255.255.255.0

  object-network 65.54.225.0 255.255.255.0

  network-object 65.54.226.0 255.255.254.0

  network-object 65.54.228.0 255.255.254.0

  host of the object-Network 65.54.240.61

  host of the object-Network 65.54.240.62

  network-object 207.46.104.0 255.255.252.0

  object-network 207.46.108.0 255.255.255.0

  object-network 207.68.171.0 255.255.255.0

  access list acl-inside tcp refuse any object-group MSN_Messenger_hosts-group of objects MSN_Messenger_tcp

  This applies to an acl on your inside interface.

  Patrick

• Pix 501 problem, I can not receive smtp messages

  Currently, I can send messages but cannot receive the mail from the Internet, if I remove the Pix and connect directly to the Modem/router then I can SMTP on port 25 and SMTP mail works fine both in & out.

  All what we want this Pix to allow at present is:

  (a) access to Internet to all clients on the network internal

  (b) allow the customers to pop mail web e-mail accounts

  (c) we want to use Exchange & Outlook and accommodate our own email via the SMTP Protocol

  Please find attached two documents: -.

  1. a current edited config of my Pix 501 running

  2. a PowerPoint of my network diagram.

  I appreciate a lot of help.

  Vinny.

  I finally found the problem.

  On the ADSL router, you have configured the same 192.168.0.0/24 network you use behind the post office

  Server. This configuration will not work because it leads to a duplicate IP address range and you have routing

  problems.

  Change the configuration to another range of IP between the ADSL router and PIX firewall and everthing will be

  work.

  Note the address unique public IP that is configured, received is on the router Netgear ADSL uses all other interfaces

  public IP addresses.

  Recovery of the networks and the IPs:

  80.x.y.z/255.255.255.x = Netgear outside intellectual property

  192.168.2.0/255.255.255.0 = network between the internal Netgear and the PIX outside interface

  192.168.1.0/255.255.255.0 = network between the PIX inside and the external interface of the mail server

  192.168.0.0/255.255.255.0 = network between the internal interface of mail server and mail clients.

  Use 192.168.2.0 255.255.255.0 for this network, and then set it 192.168.2.1 for your ADSL router inside

  interface, use a static IP 192.168.2.2 255.255.255.0 on the PIX firewall outside interface.

  ADSL installation:

  You can choose on the Netgear between all public traffic of the 80.x.y.z IP to 192.168.2.2 transmission which is NAT or

  You can transfer to forward the http, pop3 and smtp, didn't really matter, it's just important that you NAT or PAT it

  for the PIX firewall.

  PIX installation example:

  All traffic received on the PIX outside interface for http, pop3 and smtp is then transmitted by 192.168.2.2 to mail

  the server 192.168.1.2 external IP address.

  outdoor IP 192.168.2.2 address 255.255.255.0

  IP address inside 192.168.1.1 255.255.255.0

  acl_out list access permit tcp any host 192.168.2.2 eq http

  acl_out list access permit tcp any host 192.168.2.2 pop eq

  acl_out list access permit tcp any host 192.168.2.2 eq smtp

  Access-group acl_out in interface outside

  static (inside, outside) tcp 192.168.2.2 80 192.168.1.2 80 netmask 255.255.255.255 0 0

  static (inside, outside) tcp 192.168.2.2 110 192.168.1.2 110 netmask 255.255.255.255 0 0

  static (inside, outside) tcp 192.168.2.2 25 192.168.1.2 25 netmask 255.255.255.255 0 0

  Global 1 interface (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 192.168.2.1

  Installation of mail server:

  The mail server has a default route to the PIX firewall.

  Default gateway on the mail server = 192.168.1.1

  Do you have NAt or PAT on the mail server internal clients to the Internet in the direction of the PIX? If not, you need to add another road on the PIX, so know the PIX the 192.168.0.0/24 network is behind the e-mail server, as this unit is the routing for this network.

  Add a route on the PIX inside interface:

  Route inside 192.168.0.0 255.255.255.0 192.168.1.2

  E-mail clients:

  All mail clients have the internal IP address of mail as default gateway server.

  Default gateway = 192.168.0.3

  This configuration will work 100%

  Sorry if I you confused.

  sincerely

  Patrick

• Ringtones, ringtones of messages and alerts suddenly stopped working on my Pixi...

  I just upgraded to an old BB to a Palm Pixi curve. I received my new phone, September 27, 2010... two days later, after normal use (IE send SMS, call & photos) alerts stopped working completely. I've never used helmet on this phone either. I called my service provider and they sent me a new Pixi, I got three days ago. Well this afternoon, while sitting in my pocket, exactly the same thing happened as the other Pixi. (Again, I've never used helmet) I can listen to music through external speakers, I can play ringtones if I open them and play them manually... but whenever I get a call or a text will make my phone just vibrate, also my alarm will not work (sound) and neither my calendar alerts. I have all the audio settings turned 'on '. I have even system sounds turned to 'on', but that they will not play (sound when you take a photo or take a map on the screen)... no sound on my apps game either. I really like this phone, but I am so tempted to go back to my old BB curve. If someone had this problem? Is - this fixable or should I just a get a new Pixi?

  Have you checked the switch to ring on the top of the unit next to the power button? You see red showing; If so he switch in reverse if you don't see red. The unit is vibrating mode in the position, and all sound is disabled.

• 1 of about 30 directories with JPEGs would not import into LR 5.7.  Operating system is Windows 10.  How can I import the missing directory?  I tried to import more precisely, but I get an error message on the format of the pix.

  I had a directory on 5.7 LR, but she and everyone else on LR 5.7 got accidentally deleted.  I have re - import all but one of the missing directories.  One missing won't matter with DNG, added / COPY.  My OS is Windows 10.  How can I import this a directory.  I checked the properties of the missing directory with those who imported and they are all the same.

  You can combine catalogs by opening the 'master' catalogue (the one that you want to contain ALL your photos) and then using the command file-> import from another catalogue and pointing to the catalog on the other. If there is more than one catalogue of 'other', this action must be repeated as many times as necessary.

• Text picture Message

  New iPhone & still to learn, there is probably a basic explanation, but photos attached to the text, messages sent to me download any Photos on Macbook Pro app. Photos taken by the phone (5 with iOS 9.4) are no problem to download, but can not get the attached pix. Thank you very much

  Open the message with the photo, click details in the upper right. Scroll down to the spare. Press one of the photos with the finger, then several. Tap the circle in the lower right corner of each image you want to save, and then click on Save Image.

  Your photos will be saved in the camera and you can then import them into your Mac.

• Often lose pix or graphics when sending e-mail. How can I fix it?

  What Redirection with pix or graphic email, notification that "some pix can not send."  What can I do to avoid this problem?

  Hi Don Davis1141929,

  What version of Windows you are running on your computer? (Windows 7, Vista, or XP?)

  Which e-mail application do you use?

  What is the exact error message you use?

  Maybe this tutorial can help you:

  http://Windows.Microsoft.com/en-us/Windows-Vista/send-pictures-or-videos-in-e-mail

• PIX in Windows Vista

  How can I see my pictures in Windows Vista. My PIX are about 3.0 mb in size when I double click on the thumbnail, I get a blank page and a message "image too big, too many bites.

  Ok... Windows Photo Editor... are you referring to the obsolete
  program which was included in MS Office 2003 Edition and
  interrupted this year here?

  I'm guessing that you have installed Office 2003 and when you picture
  The editor has changed your image associations.

  As an experiment, you could right-click a thumbnail of the image or
  name of the file from the menu choose... Open with / Windows
  Photo Gallery.

  Windows Photo Gallery: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

  Might be interesting to try to change your image associations to
  Windows Photo Gallery. Even better... If you have not already
  fact so... download and install Windows Live Photo Gallery.

  Download Windows Live Photo Gallery 2011
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Windows Vista - how to associate a file Type of Extension
  With a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Tutorial Vista - default file Type Associations - restore
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

• "The printer is off-line" error when printing on Pixma 800 pix

  Original title: impression of the pix on Pixma800

  Print but the photos aren't. The error message is:

  The printer is offline.
  Check that the printer cable is connected and the printer is on.

  Hey guelphelf,

  Follow the two following methods to solve this problem.

  Method 1: Set printer online

  If the printer is offline, an error message appears and the print job will not end. So the value of the printer online by following the suggestions in the article below.

  Setting the printer online (Windows)

  http://support-SG.Canon-Asia.com/contents/SG/en/8200483700.html

  Method 2: Configure the driver to correct the printer port

   

  On the tab "Ports" of the "Printer properties" window, select the port for the printer driver.

  a. from the Windows desktop, open the printer properties window.

  b. click the Ports tab.

  c. below "Printing on the following ports" section, select the port to which your printer is connected.

  d. click on 'Apply' to validate the changes.

  e. click the general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  See how it goes.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.