Placement of items repeatedly

Similar Questions

• Place these items with these values

  I have a form page 7 which has a button and when you click on I'm getting:
  Change the Page buttons
  Redirect URL option
  This Application page
  Page 9 - another form
  Place these items - P9_Field
  With these values - & P7_Field.
  Form 9 has the same fields that I want to spend the 7 form and fill out all other values on 9 form when the button is clicked.
  Is there something else I'm missing this point value (s) for the other 9 form going? I have to add a branch or whatever it is in the second form 9?

  Make your redirect URL button and use the following code:

  JavaScript:Redirect ('f? p = & APP_ID.: 9: & session.: no::P9_FIELD:'+ $x('P7_FIELD').value);

  This should work for you.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Place the items in the table next to each other on stage

  Hey guys,.

  I know I have to do something wrong that is easy and simple to fix, but I can't fix.

  I have a table called a frame of a movieclip and I want to place each image as a 'menu' on the stage.

  The problem I have is that I want to put each item in menu next to each other, but the only code I could find work is the 3D carousel.

  So I try to adapt this code to my needs.

  Where I'm going wrong? Any help would be great.

  Code below:

  package classes

  {

  import flash.display.MovieClip;

  com.greensock.*;//for interpolation ability to import

  import com.greensock.TweenLite;

  com.greensock.easing import. *;

  import flash.filters.BlurFilter;

  import flash.events.Event;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  import flash.display. *;

  import flash.events. *;

  import flash.sampler.StackFrame;

  SerializableAttribute public class extends MovieClip MenuSystem

  {

  private var blur: BlurFilter = new BlurFilter (0,0,1);

  private var holderMc:MovieClip = new MovieClip();

  private var radiusX:uint = 1200; / / width of the carousel

  private var rayonY: uint = 400; / / height of the carousel

  private var centerX:Number = 100; / / x position of the center of the carousel

  private var centerY: Number = 350; / / the position there from the center of the carousel

  private var speed: Number = 0.01; / / initial rotation of the carousel speed

  private var itemArray:Array = new Array(); / / store the items to sort them according to their 'depth' - see the sortBySize() function.

  public var navigationPopupInfo:NavigationPopupInfo = new NavigationPopupInfo();

  public void MenuSystem()

  {

  the constructor code

  We do support for the menu system serve

  addChild (holderMc);

  holderMc.y = - 200;

  Also add a listener to control the rotation of the speed menu

  / * addEventListener (MouseEvent.MOUSE_MOVE, OnMouseMoveHandler);

  */                    }

  public function initNavigationPop (): void

  {

  TweenMax.to (navigationPopupInfo, 0, {alpha: 0, 40-y:, blurFilter: {blurX:3, blurY:10}});}})

  holderMc.addChild (navigationPopupInfo);

  navigationPopupInfo.x = (-navigationPopupInfo.width / 2);

  TweenMax.to (navigationPopupInfo, 2, {delay: 1, alpha: 1, y: 10, ease:Elastic.easeOut});})

  TweenMax.to (navigationPopupInfo, 1, {delay: 1, blurFilter: {blurX:0, blurY:0}});}})

  }

  Place the vital elements on stage

  public void initRange(numOfMenuItems:Number):void

  {

  for (var i: uint = 0; i < numOfMenuItems; i ++)

  {

  var arrayBoxItem:String = ('model' + (i + 1) + '_');

  var itemMc:ItemMc = new ItemMc();

  public var angl:Number; belongs to the class of the element.

  Item class extends ItemInner in the library FLA.

  itemMc.angl = i * (400 / numOfHomeRangeItems);

  itemMc.alpha = 0.8;

  itemMc.name = (arrayBoxItem);

  trace (itemMc.Name);

  holderMc.addChild (itemMc);

  itemArray.push (itemMc);

  itemMc.itemHitter.buttonMode = true;

  itemMc.addEventListener (Event.ENTER_FRAME, enterFrameHandler);

  Listen MouseEvents only on the icons, not on reflection;

  itemMc.itemHitter.addEventListener (MouseEvent.CLICK, clickHandler);

  itemMc.itemHitter.addEventListener (MouseEvent.ROLL_OVER, rollOverHandler);

  itemMc.itemHitter.addEventListener (MouseEvent.ROLL_OUT, rollOutHandler);

  itemMc.iconMc.gotoAndStop (arrayBoxItem);

  }

  }

  public void clickHandler(event:MouseEvent):void

  {

  clean your audience before doing anything else to release

  the user CPU resources

  for (var i: uint = 0; i < itemArray.length; i ++)

  {

  var itemMc:ItemMc = itemArray [i];

  itemMc.removeEventListener (Event.ENTER_FRAME, enterFrameHandler);

  itemMc.itemHitter.removeEventListener (MouseEvent.CLICK, clickHandler);

  itemMc.itemHitter.removeEventListener (MouseEvent.ROLL_OVER, rollOverHandler);

  itemMc.itemHitter.removeEventListener (MouseEvent.ROLL_OUT, rollOutHandler);

  Optional:;

  TweenLite.to (itemMc, 1, {scaleX:0, scaleY: 0, alpha: 0.1, ease:Elastic.easeInOut});})

  TweenMax.to (itemMc, 1, {blurFilter: {blurX:5, blurY:5}});}})

  to replace the carousel again see function reInit()

  FIND A WAY TO REMOVE ITEMS

  this.removeChild (itemMc);

  }

  Tabula Rasa, to prepare variables

  var variantName:String = event.target.parent.name;

  itemArray.splice ();

  If (variantName == "backBtn") {MovieClip (root) .reinitMenuSystem () ;}

  else {MovieClip (root) .addVariantPage (variantName) ;}

  }

  /////////////////////////////////////////////////////////////////////////////// /////////////////////// POSITION ITEMS IN CAROUSEL

  position items in the Menu

  public void enterFrameHandler(event:Event):void

  {

  Event.Target.x = centerX; / / position of the element x

  Event.Target.y = centerY / / position point y of

  Scale according to position point there to give the point of view

  / * var s:Number = event.target.y / (centerY + rayonY);

  event.target.scaleX = event.target.scaleY = s;

  Event.Target.angl += speed; / / speed is updated by OnMouseMoveHandler

  ADD DOF

  blur.blurX = - event.target.y / 10 + 21;

  blur.blurY = - event.target.y / 10 + 21;

  Event.Target.filters = [blur];

  Finally set the size of the elements

  sortBySize();

  */                    }

  /////////////

  Check the progress of ticks

  / / / TRI SIZE DETERMINE DEPTH OF ELEMENTS

  set the display list index (depth) of the elements according to their

  scaleX property so that the element, the index is high (depth)

  / * public function sortBySize (): void

  {

  It is not a property Array.ASCENDING DECLINING use and reverse()

  itemArray.sortOn ("scaleX", Array.DESCENDING |) Array.NUMERIC);

  itemArray.reverse ();

  for (var i: uint = 0; i < itemArray.length; i ++)

  {

  var itemMc:ItemMc = itemArray [i];

  holderMc.setChildIndex (itemMc, i);

  }

  }

  */

  /////////////////////////////////////////////////////////////////////////////// /////////////////////// ITEMS WHEN ROLLOVER & OUT

  public void rollOverHandler(event:MouseEvent):void

  {

  var currentModel:String = event.target.parent.iconMc.parent.name;

  Event.Target.parent.alpha = 1;

  TweenLite.to (event.target.parent.iconMc.tooltipMc, 1, {alpha: 1, y:-40, ease:Elastic.easeOut});})

  event.target.parent.iconMc.tooltipMc.tipHeader.gotoAndStop (currentModel);

  }

  function rollOutHandler(event:MouseEvent):void

  {

  Event.Target.parent.alpha = 0.8;

  TweenLite.to (event.target.parent.iconMc.tooltipMc,.5, {alpha: 0, y:-27});})

  }

  / / / ITEMS IN THE CAROUSEL MOVEMENT ACCORDING TO THE POSITION OF THE MOUSE

  /*

  Update of the speed at which the carousel turns accoring to the distance of the mouse since the center of the stage. The variable speed is only updated when the mouse is over the point Sprites.

  */

  / * function mouseMoveHandler(event:MouseEvent):void public

  {

  Speed = (mouseX - centerX) / 20000;

  }

  */          }

  }

  I have a table called a frame of a movieclip and I want to place each image as a 'menu' on the stage

  This code will take a MovieClip in your library with the link ("Menuitem") that has 5 labeled keyframes "menuitem 1 «...» "" menuitem 5 ', it is adapted accordingly to your stagesize and distribute, and align the elements at the top from left to right:

  I havemport flash.display.MovieClip;

  var menu_Array:Array = new Array();

  the var menu: MovieClip = new MovieClip();

  var stageWidth:int = stage.stageWidth;

  var menuWidth:int = 0;

  for (var i: int = 0; i<5;>

  {

  var menuItem:Menuitem = new Menuitem();

  menuWidth += menuItem.width;

  menu_Array.push (MenuItem);

  }

  function distrbuteAndAlignItems(_menu:MovieClip,_array:Array):void

  {

  var scaleFactor:Number = stageWidth / menuWidth;

  var xAdjustment:Number;

  trace (scaleFactor);

  for (var j: int = 0; j<_array.length;>

  {

  MovieClip(_array[j]).scaleX = MovieClip(_array[j]).scaleY = scaleFactor;

  for (var k: int = 0; k

  {

  xAdjustment += MovieClip(_array[j]).width;

  }

  _ARRAY [j] .x = xAdjustment;

  _ARRAY [j].gotoAndStop(j+1);

  xAdjustment = 0;

  _Menu. AddChild (_ARRAY [j]);

  }

  addChild (_menu);

  }

  distrbuteAndAlignItems (menu, menu_Array);

  
  

  If that's what you're looking for...

• HP Officejet 7610 all-in-one. where to place an item on the glass tray to copy?

  On the glass plate of the scanner, place the photo to scan? All I get is color bars...

  Thanks, that did it! I always get about 3 inches of colored bars any outside the image I scanned. Don't know what to do about it, but can live with it.

  Thanks again for your help. First time to the Council for help.

• All of a sudden I have no audio when I place an item in the sequence.  What have I done?

  I finished a short Adobe Prem Pro.  All of a sudden I get on a last shot, and I can't get an audio track.  So, if I select an item and drag, only the video appears.  What have I done? How can I solve this problem?

  Thank you!!!

  My guess is you have accidentally clicked off the 'A1' highlighted in the image below.

  

  If neither V1 or A1 is in these boxes, you can drag and drop. If you do this, the A1 and V1 will display. However, if only one of them is there, then you only will be able to drop the video or the audio function that is there.

  Make sure that you look like mine. If necessary, reset your workspace.

• Formatting of Repeater

  Is there a way to apply the rationale formatting to the repeater control (ie. frame on the right)?
  
  I want to use the Repeater of fire as a driving force of the renderer in a datagrid column. I have this work, except that I can't apply the justification to the way the repetition creates individual items. I need to display the items aligned either left, center-aligned or right-aligned.
  
  Is there a better way to do this with any other control?
  
  Thank you
  
  JB

  You place your items in a container, right? If you use a VBox, then add horizontalAlign = "right" to the container.

• How to position the element nested Repeater

  Hello
  
  I am trying to create a mx:Canvas element that has mx:Repeater element inside this loop around the element of external data mx:Panel. After several attempts, I realize that the attribute is not available in the mx:Panel. If I still want the function contains a sort of loop as such in the attached code, how can I have the attribute is to be enabled I can dynamically place the items according to the value of y, that I assigned to in my HTTPService?
  
  I welcome any kind of advice on that.
  
  Alice
  

  "alice_data" wrote in message
  News:gb58u1$G6R$1@forums. Macromedia.com...
  > Sorry, I should have been more explicit.
  >
  > I have an element mx:Canvas with elements of mx:Label followed by the
  > mx:repeater element, which contains the signs based on the
  > results
  > http. The position of the mx:Panel elements are supposed to
  > be
  > in line with individual attributes values are according to the
  > constraints. The main problem is that it seems that when I pulled out the
  > result.
  > do the attribute value there, despite the fact that it had been promulgated.
  > not
  > appear as they are. For example, if y is 44, he is always on the top of the
  > the
  > screen, that's why I question if the attributes are supported in
  > mx:Panel
  > elements or mx:repeater, depending on who can go wrong.
  >
  > Thanks in advance.
  >
  > Alice
  >
  >
  >
  >
  >
  >
  >
  > dataProvider = "{event_abc.lastResult.mydata.arr}" > "
  >
  > label = "{repeater1.currentItem.label}" "
  > = "{repeater1.currentItem.y}" / > "
  >
  >

  It works exactly as expected, then maybe you can look at and see how it is
  different from yours:

  http://www.Adobe.com/2006/mxml"layout ="absolute">

  Round table 1

  0

  Round table 2

  100

  Round table 3

  200

  Round table 4

  300

  
  dataProvider = "{repeaterSource.children ()}" > "

  
  title = "{panelRepeater.CurrentItem.label}" "

  x '20' = y = "{panelRepeater.currentItem.y}" / > "

• Repeat a Repeater

  Hello

  I try to get a Linksys WAP54G to repeat an another WAP54G put in place as a Repeater as well (in fact, increasing the distance between the access point).  The other is to repeat a WRT54G configured as AP.

  Is it still possible?

  And, if so, how to set up the units?

  BTW, the system now works fine - both the WRT and WAP are send and receive signals without problems.

  Thank you!

  Replicating settings from the first on the second WAP54G WAP54G.

  The second WAP54G differences will be.

  Camera IP, this must be unique.

  MAC address in the Repeater mode MAC filter table will be the MAC address of the first WAP54G.

  All other settings will be the same.

  Concerning

  Fred

• Placement of buttons in a container

  I'm trying to get a container to layout buttons horizontally (as the documentation says it should) but everytime I try, my buttons end up on the other.  Is there a way to get a layout simple flow so that my buttons are staggered automatically?  Here is a snippet of my code.  Code examples or suggestions is appreciated.

  var scrollercrollPane = new ScrollPane();
  scroller. Width = 1024;
  scroller. Height = 200;
  scroller.y = 400;
              
  var c:Container = new Container();
  c.Align = ContainerAlign.NEAR;
  c.Flow = ContainerFlow.HORIZONTAL;
  c.Containment = Containment.CONTAINED;
              
  var i: int;
  for (i = 0; i<5;i++)>
  var b:LabelButton = new LabelButton();
  b.label = buttonNames [i];
  b.Containment = Containment.CONTAINED;
  b.sizeMode = SizeMode.FLOW;
  c.addChild (b);
  }
  scroller.addScrollContent (c);
              
  c.Layout ();
  addChild (scroller);

  Hey morpheus.

  Here's a working version of your code with changes in bold:

  package{ import flash.display.Sprite;  import flash.display.StageAlign;  import flash.display.StageScaleMode;
  
    import qnx.ui.buttons.LabelButton;    import qnx.ui.core.Container; import qnx.ui.core.ContainerAlign;    import qnx.ui.core.ContainerFlow; import qnx.ui.core.Containment;   import qnx.ui.core.SizeUnit;  import qnx.ui.core.Spacer;    import qnx.ui.listClasses.ScrollPane;
  
    [SWF(width="1024", height="600", backgroundColor="#CCCCCC", frameRate="30")]  public class RandomTests extends Sprite   {     public function RandomTests()     {         super();
  
            // support autoOrients            stage.align = StageAlign.TOP_LEFT;            stage.scaleMode = StageScaleMode.NO_SCALE;
  
            var scroller:ScrollPane = new ScrollPane();           scroller.width = 1024;            scroller.height = 200;            scroller.y = 400;
  
            var c:Container = new Container();            c.align = ContainerAlign.NEAR;            c.flow = ContainerFlow.HORIZONTAL;
  
            var i:int;            for (i=0;i<5;i++) {                var b:LabelButton = new LabelButton();                                //didnt have an array for buttonname[]                b.label = "Some Button " + i;                              //make sure to set the size of the contained objects              b.size = 150;             b.sizeUnit = SizeUnit.PIXELS;
  
                c.addChild(b);
  
                //add spacers to add a space between objects              c.addChild(new Spacer(3, SizeUnit.PIXELS));          }
  
            scroller.addScrollContent(c);
  
            c.layout();
  
            addChild( scroller );
  
            //set the width and the height of the container
  
            c.setSize(stage.stageWidth,stage.stageHeight);       } }}
  

  The key here is to do not forget to set the width and height of the container so that he knows how to work with space on your objects in the room. Make sure you also set widths for your objects such as buttons for the container knows exactly where to place your items.

  on a note side I didn't know what you were doing with scrollpane so I left there assuming that it was important in the rest of your code. hope that helps and good luck!

• The session-state item values are used is not in the redirection Page

  Hello
  I have a P7_PERIOD point Page, I put the value of the session state for the click of a button. I can confirm that the value of P7_PERIOD is correctly set in session state after the button is clicked. When I try and P7_PERIOD allows to set the value of an element in another page (P17_PERIOD) on the click of a button, it does not recognize the value of new session state.
  
  For the second button, I'm telling you "Redirect to Page in this application" on Page 17
  Place these items: P17_PERIOD
  With these values: & P7_PERIOD.
  
  P7_PERIOD has the correct values in session state, but passes the old values to P17_PERIOD during the click on the second button.
  
  Any suggestions are greatly appreciated.
  Thank you
  John

  Johnny98 wrote:

  I have a P7_PERIOD point Page, I put the value of the session state for the click of a button. I can confirm that the value of P7_PERIOD is correctly set in session state after the button is clicked. When I try and P7_PERIOD allows to set the value of an element in another page (P17_PERIOD) on the click of a button, it does not recognize the value of new session state.

  For the second button, I'm telling you "Redirect to Page in this application" on Page 17
  Place these items: P17_PERIOD
  With these values: & P7_PERIOD.

  P7_PERIOD has the correct values in session state, but passes the old values to P17_PERIOD during the click on the second button.

  Redirections are run in the browser using URL generated during page processing. This means that the redirect for the second button URL uses the value of P7_PERIOD is during the broadcast of the page, not as it is in session state after it is defined by the first button.

  The second button must execute a submit and branch to retrieve the new value of P7_PERIOD. If there are page accept treatment that should not be run when the user clicks this button, use a branch point before the execution of these processes (for example on submit: before calculating), or condition the process on the other buttons.

• Place... LR5 function &gt; &gt; &gt; where is it?

  Am I looking wrong?

  Where is the 'Place '. "function, which used to be the file menu?

  Thank you

  Roberto

  There is a 'Place' menu item in Photoshop and elements, but NOT in Lightroom.

• Clear the Cache of some items when clicking on tab

  I found this in the forms:
  
  If you want to clear the cache of the page when the user clicks on the tab, this should be the work of this page. You can create an after - submit processes (before the calculations and validations) with:
  
  apex_application.clear_page_cache(:APP_PAGE_ID);
  
  However, I need to clear some items not everything on the page. I tried replacing it with apex_application.clear_item_cache(:APP_ITEM); but it does not work. What is the process that clears the cache of apex_application point?

  Is the page you click away a shipment execution when you click away? If so, I'd like to try one of these in a branch of the page.

  Suppose you are on page 1 and clicking on page 2. To Page 2, let's say you want to keep the cache on the components P2_A, P2_B, but clears the cache for P2_C.

  In your page (defined on page 1) branch that is triggered to take you to page 2, try one of these:

  Clear the cache on the page: 2
  Place these items: P2_A, P2_B
  With these values: & P2_A, & P2_B.

  That should clear all of 2 but A reset and B back to their current values to the cache before it is cleared.

  If not, try this:
  Clear the cache on the page: (do not put anything here)
  Place these items: P2_C
  With these values: (do not put anything here)

  Who should (I think) only to erase P2_C

• Adding an item placed in a State of button

  Hello World-

  First of all, I use InDesign CS5 on a MacBook Pro.

  I have problems with a positioned element I want to add a button of targeting.  It was my understanding that when you place a file, it could be referenced as master.pageItems [0]. This is the extract, I've tried.

  var doc = app.activeDocument;
  var master = doc.masterSpreads.itemByName("A-Body_Page");
  var lay = doc.layers.item("navigation");
  var imgFile = File( "~/desktop/eGuide/NavBtnNormal.png");
  master.place(imgFile,["131.25px", "637px"], lay);
  var img = master.pageItems[0];
  
  var btnHide = master.buttons.add();
  btnHide.geometricBounds = ["637px","131.25px", "670px","164.25px"];
  btnHide.states[0].addItemsToState(img);
  

  On some documents, it will work. On the other hand, it seems to randomly add a different page of the State of the button element. As I added a button to the page, I thought that this master.pageItems [0 was], changed. Therefore, I tried to approach it differently, adding the button I tried targeting the id of the img or adding a name to the img variable. I tried to access the graph in this way. I also tried to store the instruction 'master.place' within the img itself variable. As I said, sometimes it works; Sometimes it doesn't.

  I guess I just want to really know - when you place an item, how do you target at this point later in the script? I'm pretty new to JavaScript, but I really enjoy learning. As a result, more descriptive you could be better.

  Thanks in advance for your help.

  The problem is that "pageItems [0]" points to your point placed just, but only if it is the only element on this page! If not, he made it that she usually (in fact, always) does, that is, it points to the first object on your page. Note that this does not contradict my first line :-)

  If you place an element with a script and immediately want to do something with it, you must save the return value of the "place" command It is an array of 'pageItem', and generally you place only a single element, so it would be

  placedContentArray = master.place (imgFile, ["131.25px", "637px"], secular);

  var img = placedContentArray [0];

  or, simply (without danger, because you always place a single image at a time)

  IMG = master.place var (imgFile, ["131.25px", "637px"], lay) [0];

  (Note the [0] at the end).

  > It was my understanding that when you place a file, it could be referenced as master.pageItems [0].

  I guess you have picked up your original example of a sample script that wasn't expecting other items on this page.

• Can I add an item to a sequence with a keyboard shortcut?

  In the source monitor, I mark the points of entry and on the clip and then drag the clip to the seqeuence.

  Y at - it a keyboard shortcut that I can use to place the item in the order instead?

  Thank you

  Comma key is an insert; Period key is a crash.

  -Jeff

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf