placing the TEXT next and insert the image

Similar Questions

• Form field Acrobat that allows the user to the reader to browse and insert an image in a pre-defined area

  Is there a way to insert a form field in an AcroForm which allow users of Reader to browse and insert an image in this form field?

  I know that LiveCycle can do, but I need to do using an AcroForm. Or maybe there is a third party plug-in that can be used in an AcroForm to do this?

  No, you don't need 11 Acrobat to create a form that uses this method, but your Reader users will have to upgrade. I don't see that they have yet to announce the date output to drive, but in the past, it was usually in about a month of the announcement.

• Problems placing the image in underlined text

  Hi all

  I am trying to place an image in a text described in ID CC, but it will only put in one line, instead of the whole lot. for example. my text reads as follows:

  STUDENT
  PRICE

  2014

  but I can't just put the image in one line at a time, for example. "STUDENT".

  I also tried to copy the picture and paste it in, but once it only let me do this for a single line of text.

  Does anyone have any ideas why this is happening?

  Thank you very much!

  Select all of your highlighted text and choose object > tracks > make a compound path...

  Now try to place the image.

• Problems placing the Image in Indesign Cs5

  A tiff image created in Photoshop in 300 DPI with 8 X 10 inch size seems much smaller when placed in indesign page. I'm not using just frames: file - place.

  Need to print to the exact size without resizing image.

  Really would appreciate your help! Have a huge point.

  When you place the file, using file > Place? If so, when the cursor turns into a thumbnail of the image you place, you by clicking once on the InDesign page, or by clicking on and dragging a box? If you click and drag, the image fits in size what ever you box drag, rather than being placed at 100%.

  If this isn't the right answer, please provide a little more information.

• OFF Auto placing the image in the upper left corner of the scene

  Can someone help, I'm a logo on the stage using a load button, the command is
  
  I managed to call in an image in the folder of the image using a button, but it is placed in the upper left corner.
  
  1 button using:
  on (release) {}
  loadMovie ("images\\logo1.jpg", 1);
  unloadMovieNum (2)
  }
  
  I want to make sure that when I press the button using the ACE over the image is at the center of the screen
  the stage size is 800 x 600
  
  ANY IDEAS GUYS

  Flash will put any new content loaded in the upper left corner, the point (0,0), if you do not give a location. The simplest solution is to use a movieClip.

  1. create a new movieClip in the library. Don't give him any content.
  2. drag an instance of this empty movieClip on the stage at the location where you want the content loaded to show.
  3. This movieClip instance name empty.
  ("4 load in new content to this clip: clipName.loadMovie("images\\logo1.jpg ");
  5 adjust the position of the empty clip on the stage as needed.

• Transfer and insertion of images in the Windows Live Mail client

  I use Windows Live Mail to manage my email.   When I want to send or forward an email containing images WLM wants to put the photos in a slide show that almost always completely destroyed the tone, intent, impact, or creates a new message that is ineffective.

  Even if I'm generates a new email I try to insert a picture or two in the body of my email and he rips out them and puts them in a slide show, that makes no sense when I place a picture in the middle of the text which he described.
  How can I turn off completely?
  Thank you
  Mike

  Hello

   
   
  The question you have posted is better suited for the Windows Live Help support forums. I suggest you send the same on the following link for assistance:
  http://windowslivehelp.com/product.aspx?ProductID=15
   
   
  I hope this helps.

• How to stop Photoshop CC 2015 putting always placed the image in the middle of the artboard

  Having finally upgraded CS6 CC this month, I love a lot of new things. But when I Zoom in on an image, or working on a large work surface, it's very frustrating when I place a linked image, it always happens in the middle of the artboard outside my viewing area. It didn't used to be like that. You can place an image and it should appear in your display area.

  Surely, there is a setting for this that I can't find?

  Thanks in advance.

  Fine adjustment, when you place an image is guaranteed on our part. We must pay more attention to the display area.

  It's on our list. Looking for a next version of improvement.

  Sorry for the inconvenience.

• Minor "PEEM", after you have placed the image in the Image object is no longer valid

  Or,

  "How I stopped worrying and learned to love the India Pale Ale.

  I am having some problems. I think they are pretty basic.

  for (var i = 0, i < myDoc.pageItems.length; i ++)

  {

  document.pageItems [0] is an Image

  myDoc.pageItems[i].place(File("/foo/bar/baz/MyColoRectalScanInLivingColor.jpg")); //! Huzzah, it works.

  myDoc.pageItems [i] .fit (FitOptions.FILL_PROPORTIONALLY); IN CASE OF FAILURE! Oh no.!

  }

  fails, 'Object is invalidEngine. Why my object is not valid, and how do I make valid I can do groovy-neat with her, as she things fit(), transform() etc etc?

  Thank you!

  A simple (but don't feel bad, everyone including me falls for this one).

  'place' does not return the placed object. Because you can place many elements with a songle 'place' command, it returns a * table *. (And guess its length if you place a single image).

• Create a clipping mask and insert multiple Images, forms, blending options

  I am able to do this in Illustrator, but I try to understand how to do this in InDesign.

  In InDesign - after I created a custom shape (clipping mask) with the pen tool I drop an image inside the shape (CMD + D).
  However, I would like to add other forms or images in this clipping mask and set the blending options. How does this in InDesign?

  Thank you!

  1. Draw or make the mask of future cliping as frame
  2. All put together that you want to be in this context.
  3. Group them
  4. Move them to the location you want them finally
  5. Cut them into your editing table
  6. Select the target image
  7. Change > passed in

• Help place the images - why they appear to 150% and a bad image?

  Hello

  Relative newbie here.

  I have my display performace in InDesign too high. If I "place" an image or just simply slip it on the page, and little matter which image file format I use (tif, png, jpg, whatever), when placed, the images appear about 50% bigger than the source and low - ish quality. I have then to try to manually resize them so they look good on screen and when printed.

  • Why when I place images not appear 100%?
  • Is it possible to resize images other than striking handles resize and hoping for the best?

  Thank you very much.

  OK, if the balance indicates 100% with the direct Selection tool, that's what you have. Note that using the regular selection tool (the black arrow) will ALWAYS show 100% in the areas of scaling unless you have set your preferences to 'adjust scaling percentage', this is why you use the direct Selection tool to check. You can also select the image with the tool and look at the Info Palette. the real and effective ppi listed will be the same at 100%. What resolution is currently in the range of information?

  I asked vs click, click and drag because in CS4 when you drag an image is still growing the image to fit. That's not true in CS3.

  Screenshots are generally 72 ppi to size, they are captured. 72 DPI is low for most of the printed work, but no one expects very much in terms of quality for screenshots. You really place, right, is not dragging from Photoshop in ID, which is the equivalent of collage? Paste a picture gives you only the preview screen in CS3. I'm not sure you will see a difference with a screenshot, however, since the preview will be also 72 dpi.

  If the image is really too large on the page you can evolve in ID now the Ctrl + Shift keys while dragging a handle. You must press the keys before you click the mouse in Windows because there is a bug. You can also use the scale tool, or enter a new value of the scale in the areas of scaling. You can use actual dimensions in these areas if you include units, incidentally.

  In Photoshop, you can adapt the image using Image > Image size... If you uncheck the 'resample image' the resolutiuon will change inversely proportional to size, in order to reduce the size will increase the resolution, but there will be no difference in quality during the scaling in ID.

• I can't get the size of the image on the right.

  Whenever I open an image with a size of 2120 x 1192, it appears as a small image, in addition to placing the images on Photoshop CS3 and I find this very annoying because I really want to finish a project.

  Check your ppi values you defined in the metadata for the respective images (for example, with the Image - the Image size and the "resample" option unchecked).  I think you will find they are different.

  There is an option "resample the image during the paste/place" in the General options you can uncheck if all you want is a pixel for pixel operation.

  

  -Christmas

• Trying to place the Image in sheared framework

  Hi all

  I'm trying to place an image in a sheared environment (see screenshot).

  However, when you place the image, the image is sheared to match the image.

  Is it possible to place the photo, so it is level/square, but fills the sheared framework.

  Thank you!

  

  

  After you have placed the image, you can correct the sheer by selecting the content and adjusting to 0

  

• How to insert an image in Wordpad?

  Anyone have any suggestions on how to insert an image in Wordpad?

  Thanks in advance for your suggestions

  Hello

  I don't think we can save images in formats RTF...

  What you can do is insert an object (file select Jpg) and fix it with the RTF (Wordpad) documents. Correct me if I'm wrong...

  * I tried to open the RTF (Wordpad files) daughter in MS Word and insert an image, it will save, but not from Wordpad.

  I hope this helps.

• Need to insert text next to the image in the pop-up window.

  Hello. I picked up a wall to free image here:

  http://tympanus.NET/Codrops/2011/08/30/automatic-image-montage/

  It works fine, but now I play with her.

  I managed to get the images, or at least the first one to open in a popup, great. Problem is I want to be able to have the text next to the image in the pop-up window. < Title > I tried to see if I could do it with a ToolTip, which could have trouble, but did not work anyway. I do not see where to put the text and how? < h1 > doesn't work either, it flashed up before the opening of the imagewall.

  Here's the code for popup:

  <!-- starts here--><script type="text/javascript">
              function newPopup2(url) {
          popupWindow = window.open(
          url,'popUpWindow','height=700,width=800,left=10,top=10,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=yes')
          }
          //]]>
          </script><a href=
                  "JavaScript:newPopup2('images/1.jpg');"><img src="images/1.jpg"></img></a>

  I think I should use a legend, but God knows how. I think I could do a second image with the text included next to him like a popup, but that's a dress rental store and that would imply photoshopping the second image, whenever a change has been made. I want text editable in a text editor.

  I also want to add a link from the context menu.

  Long live the people

  The problem is that you open a .jpg image in the context menu.

  

  All that works... all you get is an image.

  A better way to make the popup is to create a page HTML Web new, small containing your image as any text or other content that you are interested in. Because it's just a standard HTML page, you can style the text and presentation page (including links) with CSS, just as you would any other Web page.

  then you href should look like this:

  For working example:

  http://www.worldbarefootcenter.com/

  Highlight at the bottom of page and see several popups, each being a small HTML Web page just displayed in a pop up window instead of a new tab view source if you want more information. I use a slightly different method to open the context menu, but the idea is, use an HTML page rather than just an image.

  Best wishes

  Adninjastrator

• How to use text variables and the Image for printing

  I work for several months on the product with AS3 Configurator.
  I am not competent with AS3.
  Now, it seems that perhaps my design is all wrong.
  Is there a good way to do this?

  I have a main scenario that has video clips showing images of different options for the product.
  On the first image, I use buttons to select the choice for option 1 of the Option1_mc.
  Can I store the selection in a variable.
  I use a button to go to the next choice (screen 10.)

  On frame 10, I use buttons to select the choice of option 2 in the Option2_mc.
  It is stored in another variable.

  There are about 10 options that are selected and stored in variables.
  Some are text values and other images taken from video clips Option instances.

  I made a Print_mc to use to printjob.
  I can't get the values of the variables to display the first image for printing.

  Any helpl would be appreciated.

  You are welcome.

  you will not be able to insert a variable into a textfield.  you are going to assign to the text of your TextField property set to one of your points of variables to.

  Thus, for example, if you have:

  var var1:String = 'this is a test ';

  You can use:

  TF. Text = var1;