I can't get the size of the image on the right.

Similar Questions

• Where can I get the right drivers for Satellite Z930 - PT23LA - 01 009?

  A little history: I recently bought a version of Win7 to a Z930 in Auckland from PB Tech shop. I've updated to a clean version of Win8 64-bit. My Win8 seems works ok but I noticed something strange in the Toshiba PC Health Monitor - apparently the Toshiba HDD/SSD Alert is not installed, so I don't understand not his iconic display in the health monitor (but the health monitor think my SSD is in "Good" shape - maybe it's reading the INTELLIGENT of my SSD interface, or maybe it's just saying 'Good' because the integrity monitor is apparently able to operate?)

  I can easily find different versions of the Toshiba HDD/SSD Alert Utility in questionable Web sites - download, but I really prefer to get my Toshiba support drivers. Which leads to my question:

  Where can I get the right drivers for PT23LA-01 009? NZ nor the webarea to Toshiba support have this model in their menus. The closest match seems to be

  http://www.MyToshiba.co.nz/support/computers/Ultrabook/satellite-z930/pt23la-01f00n/download?OS=30

  There is probably not much difference between a PT23LA-01F and a PT23LA-01 P but it is a bit of concern to be download & install the drivers for a chip that is no my model...

  See you soon,.
  Clark

  PS: http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-HDD-SSD-Alert/ta-p/347120 advise me the area downloads for Toshiba support. He also advises "not all utilities are available for each model and operating system. During the installation of utilities, install the TOSHIBA value added first. "Sigh... so maybe my problem is that I installed the Win8 drivers & utilities order when build my own-building a Win8 pass win7? Wouldn't surprise me in the slightest... but if this is the case are here all other dependencies in these built?

  > Where can I get the right drivers for PT23LA-01 009?

  First series of Toshiba laptops (Australian, European, etc) is very similar to the other
  Your model of laptop Australian Satellite Z930 * PT23LA * series is the same as the European model Satellite Z930 * PT23LE * series.

  That's why the drivers, tools and utilities published for Satellite Z930 * PT23LE * series must be compatible with the Satellite Z930 * PT23LA * series.

  To get all drivers for Satellite Z930 * PT23LE *, you should check this page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

  There, you can get all win 8 - upgrade the drivers. Also the HDD/SSD Alert Utility v3.1.64.14

  Welcome them

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• I have windows vist home Edition and I can't open files .scn, where can I get the right software

  I have windows vist home Edition and I can't open files .scn, where can I get the program software to install, hopefully free.

  Thank you for your time and help

  KVL

  I have windows vist home Edition and I can't open files .scn, where can I get the program software to install, hopefully free.

  Thank you for your time and help

  KVL

  On .scn files:

  http://file.org/extension/SCN

  file .scn extension:

  http://www.FileInfo.com/extension/SCN

  Program (s) that open. SCN files

  Windows Microsoft Age of Mythology Info Microsoft Age of Mythology: the Titans Expansion Info Microsoft Age of Empires Info CPNBUILD Info

• How can I get the right website to download?

  I have 2 copies of the same site, and one put to evil.  I made the site in Dreamweaver CS5 and I use a Mac computer.

  When you try to upload my site that looked just great in Dreamweaver, preview in browsers.  Major changes had been made, and I decided that I do them on my local machine and take off the server of the 'old site '.  When is about to FTP I remembered that when you talk to my host support team before downloading a site, and they had to move different places on my computer.  One place, they told me to put it was 'Sites '.  So, I decided to put it there.  Something happened that the sidebar with links to the pages disappear.  (the background was not the sidebar and the links were under menu, to the place where they were supposed to be.  I think it had something to do with the file in front of her had not been included when it has been moved and there was something missing on the model.  In any case, it is not found in its original form, but fortunately a copy had been made in the right site.  So, I just got the USB stick with the good copy and put it on my desk.  So this should be easy right?  FTP only this right?  HA!

  When I talked to my support to my host, they said the site could be just FTPed to my office.  Well, I got the FTP to work and uploaded to the site, but apparently he did the wrong website.  (that messed up) upward.

  This is what my local site folder:

  / / User name that I gave the small peak of House on my Desktop/Mac/directory /.

  I think that is where the rub as this is the download site for the 'Sites' instead of the desktop computer.

  So I think I want something else than name/User/Name I gave the small peak of House on my Mac but what would it be?  I think I'm downloading from the wrong office.  (The Office, I see when I put my computer on against the Office of the 'Site', they are apparently 2 different places).

  Any help will be greatly appreciated.

  Open your site definition in DW - Site > Manage Sites...

  Confirm that your site definition is correctly pointing to your desired local site folder and not an older one.

  

  Also, confirm that the server log - in credentials are correct and the server remote root directory is defined as prescribed by your hosting provider.

  

  Nancy O.

• How can I get the correct product key for my laptop?

  Hello I bought my Pavillion dv6707 us in TI 2008 has Windows Vista Home 32-bit (OPS).

  I just got a notice saying that my (OPS) are not authentic I have 2 key 1 products in the software 89578-OEM-7332157-00061 the other is on the bottem of my laptop that I can almost distinguish as V6KPX-BFMJF-DM7QP-T3X7B-QCQDD how can I get the right pair?

  Hello

  Those at the bottom of the laptop is for the operating system on your machine.

  Kind regards.

• Where can I get the codec to import iMovie clips in Premiere CS6?

  I'm running a PC with Win7 & PPro CS6

  I have a bunch of clips that were copied by iMovie imports (no original file no longer exists)

  They are all of a special form of .mov

  Can I play in VLC Media Player (but not Quicktime or WMP) so I know that a pc can handle the...

  When I import in CS6, I get a Codec missing or not available errorsaying...

  Where can I get the right Codec?

  Thank you all!

  AZA

  They are certainly AIC files (not exports)... and I answered my own question... FINALLY! lol, it's called "Any Video Converter"

  I found it here: http://download.cnet.com/Any-Video-Converter/3000-2194_4-10661456.html

  It can convert files in ANY file type... and I currently use it to convert batch around like 100 clips! cool pretty effing!

• All of a sudden my shrunken screen size... How can I get the display back to what it was

  All of a sudden my shrunken screen size... How can I get the display back to what it was

  Hello

  Please try this first:

  Hold down the CTRL key, and then press on + (plus) sign several times.

  I hope this helps.

• seems that I bought the wrong size stock photo because it shows the low resolution 20 x 30... How can I return it and get the right kind of photo?

  How can I return it and get the right size stock photo that actually works to post 20 x 30

  Hi Debbie,.

  Once that the photos were allowed, they cannot be removed or not allowed.

  Thus, you must make sure that the image you need for your projects. You can also check the size of the images before their approval.

  Hope that answers your question.

  ~ David

• uniquifyforuser can't get the name unique size, code 1355

  Just installed v11.1.1.1 on Windows XP SP2.
  
  When I launch Excel, I get:
  
  uniquifyforuser can't get the name unique size, code 1355
  
  
  When I run Visual Explorer, I get the same thing.
  
  
  Clues?
  
  Thank you!

  A couple of things come to mind first... What is the ARBORPATH on the desktop? I saw him get messed up in 11.1.1 installs. Also, have you tried the standby old "restart the computer" to see if it made a difference?

  Tim Tow
  Applied OLAP, Inc.

• How can I get the properties of a directory, IE

  I have an Imac w El Capitan - and the Windows user.  How can I get the PROPERTIES of a directory.  (number of files, size and type)

  slimhorn wrote:

  I have an Imac w El Capitan - and the Windows user.  How can I get the PROPERTIES of a directory.  (number of files, size and type)

  Can you do a right click on the folder and choose "Get Info"?  That will tell you how many files is in it, how big is the file, etc.

• When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

• Portege 7200: Where can I get the display driver for Win2000?

  Under display/properties, the type of adapter shows VGA adapter and the max resolution I can get is 800 x 600, which do not use the max screen size. What is the graphics card in the Portege 7200 and where can I get the display drivers for Windows 2000?
  Concerning

  Go to the support home page > download > in the drop down menus select laptop and your model > display driver

• How can I get the address of the memory of a table?

  Hi all

  Please bear with me, as this can be confusing. Let me know if you have any questions.

  I have a CCD of Hamamatsu and an external DLL that comes with it that I use. I call the "DcamCapture" function - this sends the capture command to the CCD.

  Its documentation:

  "BOOL DcamCapture (LPVOID pImageBuff, INT nBuffSize)

  [Summary]
  Begins to capture an image of the device.

  [Arguments]
  pImageBuff specifies the start address of the buffer where the image data is
  to be stored.

  nBuffSize specifies the size of the buffer (number of bytes).

  [Note]
  (1) this function emits an instruction to begin to capture the image. Since the image
  capture is not complete even when the function is completed, use the DcamWait

  function to check if the image capture is complete. »

  The "BOLD" is my own. So after that I called this function, I have to call DcamWait. The problem is, from this point, labview has already written the pImageBuff to its indicator variable - in fact, he wrote immediately after the return of this function. But before that data has even written to memory! So I go out exactly what I put in - an empty array.

  In C++, this isn't a problem. What they do in their code for the example is call DcamCapture, DcamWait in a loop, and then dereference the pointer pImageBuff once all this is done.

  I don't know how to dereference the pointer of table in Labview.

  So I have to, as a clumsy hack, call DcamCapture TWICE. I first call DcamCapture, then DcamWait, then DcamCapture again - this time, I use the FCM to dereference the pointer, pImageBuff, which has the correct data (now).

  -How can I get the location of the memory of the pImageBuff? And then, how can I access it?

  Thanks for your help. I called NOR and they 'think' about my problem - I would see if anyone here can come up with a solution.

  You can do this by using the functions of the memory manager of LabVIEW, you call by setting the name of the library to 'LabVIEW' in the call library function node.  The functions you need are DSNewPtr, MoveBlock (which in fact copy of data) and DSDisposePtr.  There are short documents on these functions using LabVIEW.  You need to call DSNewPtr to allocate the memory, switch to the DCamCapture, loop on DCamWait, use MoveBlock to copy this pointer data in a table that manages LabVIEW and finally free the pointer.  Here is an example of a similar sequence: http://forums.ni.com/t5/LabVIEW/array-pointer-from-dll/m-p/1217453#M519958.

• How can I get the icon that allows me to zoom in a larger type at the bottom of all pages

  When I'm in firefox, my impression is so small that I can hardly see it... i have done all the things that I learned and I got my type of font I like, but for some reason, that I can not get the size to change to a larger size... until my computer crashed and I had to do everything everywhere, this icon was there... on some pages, at the top of the page , I think that under Tools (which isn't on all of my pages) will allow me to zoom in for a larger size but in firefox, it is not can not... someone hele me with that?

  This Firefox support page helps you:

  http://support.mozilla.org/en-US/kb/how-do-i-use-zoom ?

• How can I get the opening for an enlarged screen screen

  Original title: opening screen

  How can I get the opening for an enlarged screen screen

  If you are talking about an Internet Explorer page, three options.
   
  
  1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.
    
   
  2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".
   
  
  3: IE New Window Maximizer
  http://www.MajorGeeks.com/IE_New_Window_Maximizer_d1746.html