Planning for VLANs on IBM BladeCenter S fo ESX

I'm planning an implementation of VLAN logic using a BladeCenter S chassis. Since in a blade environment have you don't have several NICs (4 for each blade in my case) I thought what would be the best thing to do in my case. Here are the requirements:

(1) I don't want to lose any NIC for standby use

(2) I need to run virtual machines that require access to one or more of these networks: LAN, DMZ, network management (for SC), backup network, vmotion

(3) performance of vmotion

(4) network paths must be fully redundant and load balanced

The configuration that I thought was to make a single vSwitch with 5 groups of ports: LAN, DMZ, vMotion, backup and management port and assign each group to a VLAN different.

The problem with this configuration is that most of the connections will not have a real separation LAN, vMotion, backup and management because everything will work on the same NIC 4 so for vMotion traffic will not be separated and the backup traffic will share the same cards as well, so having an impact on the overall performance of the network If I run backups in hours of work; vview performance point is the same things that share the port LAN backup, vmotion, lan group and management.

I'm not much concearned on the DMZ network performance, because we publish just our own internal portal that does not generate a lot of traffic.

If some of the things I brought are incorrect or based on designs wrong please correct me. hope you will help me clear my mind on this configuration.

Thank you in advance.

Since then, she looks like my suggestion! I am more than happy with it, no more comment if you like it & deal closed. hahahaha just kidding...

System engineer

Zen Systems Sdn Bhd

Malaysia

www.no-x.org

Tags: VMware

Similar Questions

  • Problems IBM BladeCenter S ESXI 5.0

    Hello

    I need help because it's been more than me that I me down with my IBM Bladecenter S and VmWare esxi 5.0.

    Configuration of our Lady:

    BladeCenter S 8886

    5 blades HS22 7870 with SAS (CIOv) connectivity cards

    2 modules NUMBER

    Of we have the option configured "Lun to search the block devices" SAS connectivity card on "Lun 0 only" because we have the boot on san for hypervisors.

    Pour policies manage the paths to the disks since the ESXi are configured on 'Fixed '.

    Operating system: ESXi 5.0 (boot on san)

    Two clusters are made between the 5 blades with a shared storage pour access to VMS and allow the migration to hot.

    The problem:

    The hosts lose access to LUNS on which virtual machines are located.

    Reduce the number of this type Hauptstr we noticed when insulating each LUN on a single host, the problem was much less, the activate option but we happens the HA to pay and to make migration hot.

    The problem seems to happen when the number of i/O disk becomes high.

    Attempted procedures:

    Update of firmware Modules NUMBER, we went on a updated version officially ESXi 5.0 (1.2.3.006)

    Update the firmware of the blades with Tmob, updating also card SAS connectivity.

    The certifier we did support and compatibility of our material by material support of IBM, at the request of the IBM Software support.

    Sending many bundle vmsupport, with newspapers and configuration, software to analyze support.

    Notre Dame configuration support for IBM Labs we have indicated what they.

    The problem was also occurred en ESXi 4 Update 1 version, but only 2 times and with less of VMs, so less i/o.

    We are waiting for a correct solution on the part of IBM since September 2011, we still have to intervene too often day and night on our servers because of these crashes that even if they are less scouring with the insulation of the luns, still prevent us from sleep.

    Thanks for your help, she is welcome!

    Hi Jeremy,.

    We have the same problem IBM Bladecenter S with VMware ESXi 5.0.

    Case is IBM and VMware.

  • Any plans for changes to the API of Extension for Thunderbird?

    I was wondering if there are plans for the adoption of a more friendly/purely JS API extension, similar to the Firefox SDK or WebExtensions in Thunderbird?

    This has been discussed recently in the Mozilla planning mailing list.

    See https://mail.mozilla.org/pipermail/tb-planning/2015-August/thread.html#3949 for the Archives of the thread.

  • can I get an annual plan for storage iCloud?

    can I get an annual plan for storage iCloud?

    Only by buying enough iTunes Store to pay a value of one year of storage iCloud for gift cards and leaving enough of their credit to do so.

    (141114)

  • What are the future plans for Aperture?

    It's simple.  I bought Aperture because iPhoto was not to my needs.  Now Aperture is replaced and the comments there say that Photos doesn't have the tools, I want to be.

    How much time have I not the right to use and download copies of Aperture for my computers?

    What are the plans for the Photos by integrating the features used by those who have paid extra for the opening?

    I'm not a professional photographer, but use a DSLR camera and it's easy to take "too many pictures".  An I take a picture, I keep if the quality is OK.  Records, it does not mean that I want to pay extra to save and it certainly does not mean that I want it on every device I own.  I want to use stars, keywords and projects (this function any name is fine with me) to organize my collection.  I don't want to just find a picture by the date it was taken, but of course, it is the most common research.  I want to have pictures with 2 stars or better in smart folders that I share on my various devices.  I use a smart folder for this today.

    I'm upset that the product has lost support.  I saved the libraries that rely on a programme of work to read (I've lost images in a dark form in the 1990s).  I spent money on a product, expecting to own for many years, but may not be able to download it for a new purchase of computer in 1 year.  I'm not yet sold on the cloud, and that's why.

    I spent money on a product, expecting to own for many years, but may not be able to download it for a new purchase of computer in 1 year.

    Apple has stopped the development of Aperture.  You will be able to use Aperture, as long as you have a computer with an Operarting system which is compatible with aperture.  Don't update your Mac to new versions of the system, unless you know for sure that the new system supports the opening. Don't forget to keep a full backup of your Mac with opening and your version of Mac OS X, so you can revert to this version, if you accidentally updated to a version that does not support opening.

    The Photos.app can open Aperture libraries, so you will always have access to your original images, albums and edited versions. See: How Photos handles content and metadata from iPhoto and Aperture - Apple Support

  • Any plans for a USB-7342?

    We have a handful of systems that use the PCI-7342 in windows XP on our production floor, it's great and it works, so we do not want to change that.  Never.

    My problem, as a developer, it's that I would spend my multiple PC configuration (where I have a LV 8.5.1 and one with 2010) for a machine with a few different VPC.  The new windows 7 VPC allows the devices to get through, but not the PCI/PCIe devices.  I'd like to be able to get a USB-based controller to be able to spend my development.  Are there plans for such a thing?  If not, is it because there is no demand, or because there are fundamental problems with the passage of the motion controllers?

    Thank you for your question.  I'm not aware of any project to make a controller for axes with a USB interface.  At the same time, we had a controller who communicated via a firewire on the PC port, but it has since been abandoned and only has driver support NI Motion 7.0.  I'm going to talk with our product development department just to be sure there is nothing in the works, but I don't expect it's a product that we intend to offer anytime soon.  I'll let you know if I find something different.

  • the cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

    The cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

    Hello

    · What is the number and model of the mouse?

    · Will there be any changes made on the computer before the show?

    You can follow the steps listed in the link below: how to solve the pointer display problems mouse in Microsoft games: http://support.microsoft.com/kb/309703

  • Impossible to assign the IP address for VLAN 1 (6248)

    Nice day

    I bought two layer 3 PC 6248 switches. When I try to assign an IP address by default VLAN 1, it displays an error 'failed to remove management VLAN - ID ".  These predisposees are already preconfigured with the IP address 192.168.0.1 for VLAN 1. I would like to delete this IP address and assign one in the range 10.10.1.x for VLAN 1. But this is NOT possible.

    Can someone please help me to remove this preconfigured IP, so that I can attribute my interest?

    Thanking you,

    Sam


  • How can I get a list of jobs that are planned for the days of the future

    How can I get a list of jobs that are planned for the days of the future?

    In a previous article, I found a query that lists the scheduled tasks that are already running. Can I get a similar request for the future days which is compiled?

    Hi sreedevir,

    SELECT jobmst.jobmst_prntname, jobmst.jobmst_name, jobrun.*

    FROM jobrun JOIN jobmst ON jobmst.jobmst_id = jobrun.jobmst_id -joining tables jobmst and jobrun

    WHERE jobrun_proddt > = dateadd (dd, 1, datediff (dd, getdate())) 0, -future dates

    AND jobmst.jobmst_type = 2 -given jobs (and not groups)

    ORDER BY 1, 2 -Sort by name of the parent, then by task name

    Feel free to make any changes to your reporting needs

    ARO

    The Derrick

  • Planning for 5.0: many questions, not enough answers!

    We would like to start planning the launch of the 5.0 browser and have many questions.  I hope that Tneil or other people can help...

    1 has announced a release date yet?

    2. What devices will come with it standard?

    3. What are the previous devices will be able to upgrade to it?

    4. What is the upgrade process?

    5. a minimum of OS will be necessary?

    6. what device API will be available?

    a. blackberry GPS (lat/long play)?

    b. blackberry Maps (mapping of the location, directions?

    c. Blackberry AddressBook (read & write)?

    d. Blackberry calendar (read & write)?

    e. Blackberry Email (write, with attachments, the body and custom object).

    7. an announcement on the site of the Blackberry Developer's Blog when they are available?

    8 is it too late to get in on the beta?

    9. what new functions/classes of Javascript will be supported?

    Thanks for any info you can provide.  This will really help us to plan for the future development activity.


  • Better plan for a student

    I am a student and I already have a plan that includes the cc of photoshop and lightroom cc, in my studies, I also this semester need Illustrator, which plan would be the best way for me to do this? To add Illustrator on the side or do you have a plan for students which includes all programs for a better offer?

    You'll want the edition of the students. Much more affordable. Check with your school to see if they already available through their portal software plans.

    Adobe Creative Cloud for students and teachers | Adobe Creative Cloud

  • Why no Plan for video creation?

    Please slap me if I'm wrong, but I don't see a bundle to video content creators. I only need of Premier, After Effects and Photoshop, is there a plan for that? I don't need all the friendly apps mobile-to-web and web designing applications etc. Any help is appreciated.

    There is no beams beyond what you see advertised...

    Creative cloud plans

    https://creative.Adobe.com/plans

    For the three that you quote, they do not have a special group of them (or any kind of pick-3 beams) then you are probably better off getting a full subscription anyway.

  • All future plans for Adobe Story?

    I'm working on a film project and I want first to Adobe Story app, but I don't want to use a system that was no longer under development. Can I say Adobe Story not has not been updated in some time, and it is the mobile application was abandoned.

    Please let me know if Adobe is planning free updates, or if Adobe Story has reached it's end of life.

    Thank you

    Hi Justin_Kaz,

    Please let me know if Adobe is planning free updates, or if Adobe Story has reached it's end of life.

    Thank you

    Unfortunately, we are announcing our plans for applications advance for lack of departmental reports. I'm sorry.

    Kevin

  • Someone at - it a process of using planning for configurations document, like the old document BR.100?

    Someone at - it a process of using planning for configurations document, like the old document BR.100?

    Ben

    Please refer to Note "Generating BR100 referred to report in Oracle 11i, version 12.0 and 12.1 version planning (Doc ID 826324.1)"

    It has:

    • the hotfix level required
    • an instruction step by step (BR100StyledReportDocument.pdf)
    • a pattern of predetermined OPE (BR100_Layout.rtf)

    The latest documents are included in the attachment 'BR100StyledReport.zip '.

    More useful planning references are available in ' Information Center: planning, Oracle E-Business Suite (Doc ID 1551167.2).

    Good luck

    Larson

  • Any plans for more models in the 13th generation?

    Hello

    I realize that it is unlikely to get a response, but I would ask still thinking...

    Are there plans for more models in the 13th generation PowerEdge line up, specifically at the lower end? Say, a T330? A web search reveals a few tips, but nothing definitive.

    Thanks for any information!

    Hello.

    We are not aware of all the future plans for the release of 13G low servers. The 13 lower G servers available on the market today are R430 & T430.

Maybe you are looking for