Planning plan utility load / dynamic Calc

Similar Questions

• How to coordinate the dynamic Plan asynchronous loads?

  How do we start a sequential next step according to the success of two or more asynchronous earlier steps.
  
  1 wait for the display of several variables of step of "success"?
  
  2 or [success] completion of all stages of asynchronous child "does end with success" a synchronous step Parent, so a step sequential next [to Parent] can start?
  
  My experience tells me once an asynchronous step starts, a synchronous step (in the same element father) starts immediately after.
  
  What I want to do: asynchronous collect data from multiple sources and once with collected success, synchronously launch an update.

  You can do in a package. You can use the odiWaitForChild tool.

  Scen1 (Async)-> Scen2 (async)-> Scen3 (async)-> odiWaitForChild-> startUpdateProcess

  Plans to charge, you can do the same thing.
  Create a plan of load to 2 no series on the root. Step 1 and step 2.
  Inside of step 1, create 3 parallel steps.

  [email protected]
  Do your ODI trip a success.

• 11.1.2.1 planning dynamic Calc Parent does not roll their children:

  I have a form where I have all the members of level 0 in the POV is a member of begBalance period (which should be included in the application).
  
  On the lines, I have the account hierarchy and on the columns I have a branch of the entity dimension.
  
  Parents in the dimension account the value dynamic calc and all children are set to be aggregated as a sum. Parents in the entity dimension are defined to store, with children, the overall value as sum.
  
  The form allows me to enter data into Level0 combinations, however on behalf of parents, which I expect to show the sum after a backup and refresh shows no data and parents of the entity do show no data even after the calculation of the form with the form to calculate rule.
  
  Any ideas why this might be happening?
  
  Agnete

  OK, I thought about it. I had a member in another defined forever total dimension (^). I thought it would be something simple that I forgot.

• Name of user and password invalid executes the Plan of loading data

  I get the following error when I try to execute the plan of loading data for loading data from my EBS server.  I don't know what username and password she is claiming is not valid or where to change the value.  Any ideas where I can find it?

  ODI-1519: series step "start load Plan.

  (InternalID:4923500) ' failed, because the child step "Global Variable Refresh.

  (InternalID:4924500) "is a mistake.

  ODI-1529: refreshment of the variable 'BIAPPS.13P_CALENDAR_ID' failed:

  Select CASE WHEN 'The Global Variable Refresh' in (select distinct)

  group_code from C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE =

  "13P_CALENDAR_ID")

  THEN (select param_value

  of C_PARAMETER_VALUE_FORMATTER_V

  where PARAM_CODE = '13P_CALENDAR_ID. '

  and group_code = 'Global Variable Refresh'

  and datasource_num_id = ' #BIAPPS. WH_DATASOURCE_NUM_ID')

  ON THE OTHER

  (select param_value in the C_GL_PARAM_VALUE_FORMATTER_V where PARAM_CODE =

  '13P_CALENDAR_ID' and datasource_num_id =

  ' #BIAPPS. WH_DATASOURCE_NUM_ID')

  END

  of the double

  0:72000:Java.SQL.SqlException: ORA-01017: name of user and password invalid.

  connection refused

  java.sql.SQLException: ORA-01017: name of user and password invalid. opening of session

  denied

  to

  oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)

  to

  oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)

  to

  oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter.getConnection(OnConnectOnDisconnectDataSourceAdapter.java:74)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.executeVariableStep(LoadPlanProcessor.java:3050)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.refreshVariables(LoadPlanProcessor.java:4287)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.AddRunnableScenarios(LoadPlanProcessor.java:2284)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.AddRunnableScenarios(LoadPlanProcessor.java:2307)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.SelectNextRunnableScenarios(LoadPlanProcessor.java:2029)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.StartAllScenariosFromStep(LoadPlanProcessor.java:1976)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.startLPExecution(LoadPlanProcessor.java:491)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.initLPInstance(LoadPlanProcessor.java:384)

  to

  oracle.odi.runtime.agent.loadplan.LoadPlanProcessor.startLPInstance(LoadPlanProcessor.java:147)

  to

  oracle.odi.runtime.agent.processor.impl.StartLoadPlanRequestProcessor.doProcessRequest(StartLoadPlanRequestProcessor.java:87)

  to

  oracle.odi.runtime.agent.processor.SimpleAgentRequestProcessor.process(SimpleAgentRequestProcessor.java:49)

  to

  oracle.odi.runtime.agent.support.DefaultRuntimeAgent.execute(DefaultRuntimeAgent.java:68)

  to

  oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:564)

  to

  oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:518)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to

  weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  to

  weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  to

  weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  to

  weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to

  oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  to

  oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  to

  oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  to

  oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  to

  oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  to

  weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to

  oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  to

  weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to

  weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to

  weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  to

  weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  to

  weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  to

  weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  to

  weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  to

  weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.sql.SQLException: ORA-01017: name of user and password invalid.

  connection refused

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:397)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)

  at oracle.jdbc.driver.T4CTTIfun.processError(T4CTTIfun.java:689)

  to

  oracle.jdbc.driver.T4CTTIoauthenticate.processError(T4CTTIoauthenticate.java:455)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)

  to

  oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:387)

  to

  oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:814)

  at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:418)

  to

  oracle.jdbc.driver.PhysicalConnection. < init > (PhysicalConnection.java:678)

  to

  oracle.jdbc.driver.T4CConnection. < init > (T4CConnection.java:234)

  to

  oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)

  at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)

  to

  oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:410)

  to

  oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:386)

  to

  oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:353)

  to

  oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:332)

  to

  oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ ConnectionProcessor.run (LoginTimeoutDatasourceAdapter.java:217)

  to

  java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  at java.util.concurrent.FutureTask.run(FutureTask.java:138)

  to

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  to

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  at java.lang.Thread.run(Thread.java:662)

  Found the answer after 4 days of research.  Opening ODI Studio.  Go to the topology, expand-> Oracle Technologies.  Open BIAPPS_BIACOMP.  In my system, he had "NULLBIACM_IO" has changed nothing to my correct prefix and it worked.

  Now, my data load gives me the error that the table W_LANGUAGES_G does not exist.   At least I liked long.

• ODI - Hyperion Planning metadata load question

  Hi all
  
  Loading metadata in Hyperion planning through SQl IKM - Hyperion Planning, a movement of a member from one parent to the other create a duplicate instead of moving.
  
  Here is an Ex:
  
  Oracle table - update data Source:
  parent, child, alias, storage, aggregation
  G3K, G285, xxxxxx, shared, +.
  
  In planning (before loading the interface):
  parent, child, alias, storage, aggregation
  G2A, G285, xxxxxx, shared, +.
  
  In planning (after loading the interface):
  parent, child, alias, storage, aggregation
  G2A, G285, xxxxxx, shared, +.
  G3K, G285, xxxxxx, shared, +.
  
  As you can see above, Member "G285" got double in planning. Not sure why this happens? am I missing something?
  
  ODI 10.1.3.5 & planning 9.3.1.09
  
  Appreciate your feedbacks.
  
  Thank you.

  Hello

  If you think about it so it is kind of correct what he does.

  If you have a member stored then you can't duplicate, so if you give the Member a different parent, then she will move the Member.

  Now shared members, you can have several duplicate, then when you load a shared member metadata, and a new parent so he does not know if you want to move the Member so it goes in the way of the creation of another shared member.

  If you are a member who is shared in two times and then give another parent, how would he know that you wanted to move.

  A possible solution to this is have an interface to remove members shared that you require no more, and then run the normal load of members shared in the correct location.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Dense Sun - dynamic calc

  Hello
  
  Essbase / planning 11.1.2.1 - BSO db.
  
  We review our app / design db after implementation last year. One of things I noticed, is that a particular dimension of dense has all such members as stored (i.e. the level 0 members aren't dynamic calc). Dimension has no member formulas, it's a roll of law with consolidation of members of (+ and ~).
  
  I changed this in our dev environment and ran some tests - calc time considerably improved and total page file size reduced by half (disk space becomes a slight issue for us, so it's useful).
  
  If we ran with this change, is there anything that we need to do or know, except changing business rules to exclude partial calc or aggs dims on the modified dimension? It seems a relatively small change might, but you seek clarification that this is the case...
  
  Documentation relative to what all the combinations necessary to not level 0 members States is calculated on the fly (for example a user recover). Is true even if an intersection not level 0 is used in a business rule? (test this sample based sounds great, once again seeking confirmation).
  
  Thank you
  
  JB

  Yes, the same is true within a rule (that is, if refer you to a higher level in a dense dimension, Essbase will calculate for you).

  I think that the only functional question, you did not mention is that you must be sure that none of your current charges / calculations / user lock & send activities depend on being able to store a value at a higher level - for example, that you never load in a quarter and then run a calc that allocates up to periods.

• Dynamic Calc BSO ratios

  Hello everyone,

  I'm trying to think of a good way to ratios of calc on quarterly averages.  My question is that right now, I have a plan that looks like the following:

  
  The dynamic calc for Q3 is as follows:

  IF (@ISMBR ("AVG"))
  ('Jul' * 'Jul'-> 'Days' + 'Aug' * 'Aug'-> 'Days' + 'MS' * 'Sep'-> 'Days').
  ('Jul'-> 'Days', 'Aug'-> 'Days' + 'MS'-> 'Days');

  ElseIf (@ISMBR ("CHG") AND (@ISMBR ("actual/actual annualization")))
  "Actual/actual annualization";

  ElseIf (@ISMBR ("CHG") AND (@ISMBR ("30/360 annualization - months")))
  "30/360 annualization - months";

  ElseIf (@ISMBR ("CHG") AND (@ISMBR ("rate of return on accumulating assets")))
  "Performance accumulate assets";

  ELSEIF (@ISMBR ("CHG"))

  "Jul", "Aug" + "Sep";
  ELSEIF (@ISMBR ("END"))
  "Sep";
  ENDIF;

  I'm doing an if statement that will allow me to calc similar Ratios children without having to list them separately (because of averages).

  something like:

  ElseIf (@ISMBR ("CHG") AND (@DESCENDANTS("Ratios")))

  @Descendants ("ratios");  <-I know that this does not

  Someone has encountered this or I am looking at it wrong?

  Best regards

  Bret

  I think I was overthinking the problem, here is the solution:

  IF (@ISMBR ("AVG"))
  ('Jul' * 'Jul'-> 'Days' + 'Aug' * 'Aug'-> 'Days' + 'MS' * 'Sep'-> 'Days').
  ('Jul'-> 'Days' + 'Aug'-> 'Days' + 'MS'-> 'Days');

  ElseIf (@ISMBR ("CHG") AND (@ISMBR (@DESCENDANTS ("Metrics"))))
  "Q3".

  ELSEIF (@ISMBR ("CHG"))

  "Jul", "Aug" + "Sep";

  ELSEIF (@ISMBR ("END"))
  "Sep";
  ENDIF;

• Impossible to deploy feedback and dynamic calc (property data store) to the cube of the essbase EPMA (BSO).

  Hi all

  We use the Hyperion 11.1.2.3.500 version. We have EPMA Essbase, Planning.

  Currently, we are facing 2 problems with application essbase (BSO) EPMA.

  1. the comments which are available in EPMA are not able to deploy to Essbase. Once we click on deploy option is giving in the success and also to give that error

  "Error affecting comment (account-12345) Member Accountxxx (3375).

  
  

  Tried to put comments in the essbase outline and not to deal with all the questions. So question is make observations of EPMA to Essbase.
  

  
  

  2. we have some account in which are dynamic calc in EPMA. After deployment, the members come to Essbase as store.

  
  

  Attempted to assign ownership of the data storage from the dynamic store Calc in Essbase outline, then checked and recorded. No problems were detected. It is by deploying of EPMA to Essbase.

  
  

  Thank you

  
  

  
  

  I ran into a similar issue.  You have first accounts second period?  Then try in first period and account.  It cleared my problem.

• After loading and Calc'ing get an overview of the database in data error

  I do my developer on my laptop and the transfer of the object on the server
  
  I loading and calc would be about 4 years of data on Bith my laptop and the server
  
  When I try to get an overview of the data
  
  I get this error
  
  The names of members in doubles with overview of the data are not supported on my laptop
  
  is the because I clicked on allow Dup Member?
  
  because I don't have all the DUP in my plan
  
  and on the server, this is the error I get is
  
  Cannot connect to the olap service
  cannot connect to the Essbase Server
  Essbase error 1051293
  Login Failied
  
  but I am connected and connected to the server
  
  Please notify
  
  Published by: level following December 16, 2011 13:26
  
  Published by: level following December 16, 2011 13:31

  I'm not in front of a system to check, but have you looked at the duplicate property on your new app? I guess that the setting is saved with the .otl, but overall when copy you it.

  In this case, Yes, rebuild the hierarchies is probably the way to go.

• Dynamic Calc to a member of scenario

  I am trying to create a dynamic calc for a scenario to calculate the variance between one scenario on the other. When I run a report, I get this error message:
  Query execution error: CBS-SNI-BP-DB/Sni_prod/Consol/planning/Error (1200400) error running of formula [Consol_Current vs prior Cycle %] (line 0): scalar double argument in function [@SUB]
  
  The formula Consol_Current vs prior Cycle % is the following:
  IF (@ISACCTYPE (Expense)) (@UDA("Scenarios","r_PriorCycleC") - @UDA ("Scenarios", "r_CurCycleC")) / @ABS (@UDA ("Scenarios", "r_PriorCycleC")) * 100; Else (@UDA("Scenarios","r_CurCycleC") - @UDA ("Scenarios", "r_PriorCycleC")) / @ABS (@UDA ("Scenarios", "r_PriorCycleC")) * 100; ENDIF
  
  What I write bad? I have an other scenarios such as the Consol_Current vs Budget with the same formula except that it points to the Budget and they run without any problem.

  The formula Consol_Current vs prior Cycle % is the following:
  IF (@ISACCTYPE (Expense)) (@UDA("Scenarios","r_PriorCycleC") - @UDA ("Scenarios", "r_CurCycleC")) / @ABS (@UDA ("Scenarios", "r_PriorCycleC")) * 100; ON THE OTHER
  (@UDA("Scenarios","r_CurCycleC") - @UDA ("Scenarios", "r_PriorCycleC")) / @ABS (@UDA ("Scenarios", "r_PriorCycleC")) * 100; ENDIF

  Function @UDA in the formula above returns a list of the members, but the type expected number here.
  Change the formula as below with @SUM of @UDA so that it returns the number of the expected type.

  The formula Consol_Current vs prior Cycle % is the following:
  IF (@ISACCTYPE (Expense)) (@SUM (@UDA ("Scenarios", "r_PriorCycleC")) - @SUM (@UDA ("Scenarios", "r_CurCycleC"))) / @ABS (@SUM (@UDA ("Scenarios", "r_PriorCycleC"))) * 100; Else (@SUM (@UDA ("Scenarios", "r_CurCycleC")) - @SUM (@UDA ("Scenarios", "r_PriorCycleC"))) / @ABS (@SUM (@UDA ("Scenarios", "r_PriorCycleC"))) * 100; ENDIF

• Storage for Non option sheet dimension level members: store vs dynamic calc

  Hi all
  
  What is the general rule regarding the options of storage for leaf-level members? I think that it should be dynamic Calc under normal circumstances and have in store if we are going to load data in the leaf level no. Is this correct? Are there other aspects while defining members?
  
  Thank you and best regards,
  
  Amol

  Don't forget to consider whether the dimension is dense or sparse. Dynamic calcs generally much higher level work on dense dimensions as long as you are not data entry in senior level members. High level dynamic calcs in sparse dimension CAN work well, but more often on smaller dimensions. It really depends on what you pass in your cube. On scattered large, higher levels are almost always, but it's one of those areas where you can sometimes bend the rules.

  Also, be sure to consider the calc of the implications of doing something, stored or dynamic.

  -Jake

• Is there a way to store the State of the vi loaded dynamically without resorting to tricks Subvi?

  I have a VI to open a UDP connection, data recovery, and then close the connection:

  

  Set the State to 1 opens a UDP connection.

  

  Definition of State 2 retrieves a UDP packet. Most of the boxes above is for the manipulation of data.

  

  Placed at 3 farm the UDP connection.

  Now, calling this vi as a sub - VI works fine:

  

  But calling the vi dynamically only:

  

  The second call inside the while loop will raise an error. Apparently, bibliographic are not valid from one call to the other when you call a vi loaded dynamically. What I need to know is, is there a convenient way to get around this?

  Hello

  The call dynamically a VI within a while loop can be pretty bad in terms of performance and I'm not sure it's a good idea.

  But if you really want to do this, using the function "Call by reference node" would be more appropriate in your case (you can find some examples easily).

  Best,

  J.

• Error opening a VI (LabVIEW: unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid.) The file could not be loaded)

  Hi all!

  Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:

  LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.

  This message repeats when I try else open a Subvi.

  Step by step:

  1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.

  2 - I have edited the copy, created Subvi etc.

  3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.

  4. then I tried to open the next day and... bug! I just couldn't do

  What can I do to open/recover the VI?

  I am using 32-bit LabVIEW 2016 in a Windows 10

  I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.

• Dynamic Calc

  OSI asks:

  If the parent has only one child, I need to tag the Parent Member as never to share... what happens if I tag, parent the same Member as dynamic calc instead never part.. ?

  Thnaks...

  Marking of a parent as never part would help you to action preventive action implied,

  If the parent is a dynamic calc, Essbase will calculate the roll of the data if the recovery is requested for the parent, which consumes more memory

• DIFFICULTY level zero dimension dynamic Calc members

  According to the Guide of the Oracle: "dynamic calc members are ignored in a statement to FIX." If the only member in a statement to FIX is a dynamic member calc, an error message appears indicating that the FIX statement cannot contain a member dynamic calc. »
  
  However, I want to FIX on level zero members in the dimension of accounts: FIX("Accounts",0). If this dimension of accounts is dynamic calc (but 0 level accounts are STORED), this statement fix would work by running certain calculations level zero members account?
  
  JT

  Yes, as long as your HOTFIX includes at least a dynamically calculated member not that works perfectly.

  Either way, sometimes there may be no point for fixation on all members stored a dimension of dense - see my post in this thread (and more importantly, the post of Network54 related to it): Re: confusion of the theories of computation