Play a video clip in an existing Flash animation

Similar Questions

• My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  There is a lot of noise from speakers as well.

  Disable the hardware accelerator or install flash player 10.

• I get an error COOD11B1 code when you try to play a video clip. __

  I get a COOD11B error code when I try to play a video clip.

  Hi Pat dubois,

  1. what type of video file that you are trying to play?

  If you receive error C00D11B1 code,

  Cause one. It may be a problem with the components of security of your digital media player to play the files on your computer

  Follow the instructions in the article given below, because it can help you solve the problem

  Windows Media Player C00D11B1: http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

  Go to http://drmlicense.One.Microsoft.com/Indivsite/en/indivit.asp , then you will need to get the update. You need to download this patch to remove the error code and everything works again.

  Also take ownership of the files you are trying to play by right clicking on the file and taking possession.

  B cause. If you are probably trying to play a file that uses a codec that is not on your computer. I suggest you to download and install the latest pack of codecs for Windows Media Player 12 on your computer. Search using your search engine preferred for the third-party codec packs.

  Codecs, frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Impossible to play a video clip of the flash player

  I had 2 video clips recorded on my USB key, (I was asked if it had to be either windows or mac) I said windows but when I click on the video it says it can not play, but the solution Center has not detected a problem. Any suggestions?

  It is a wmv file. I downloaded what you recommended, but he won't play again although he repeats to me windows media player cannot play the file.

  =====================================
  Apparently the. WMV file is damaged in some way.

  Could you ask the sender to send another copy?

  If it's very important... the info on creating
  a new version of the. WMV file is maybe worth a visit:

  In many cases, I found that convert a. WMV file
  to the. WMV format could produce a new version of the
  compatible file. Sounds redundant, I know, but it
  can work.

  Microsoft Expression Encoder 4 can perform the conversion.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601

  +++

  If you want to try Expression Encoder 4 following
  info can be useful:

  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  Left click (highlight) the. Left and WMV file, click the Open button.

  You will see the file in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

• Audio does not play not video clip

  Hi all

  New on first Pro CC but experienced engineer audio production (Logic Pro 8 - X).

  I'm having a problem where I can't hear audio of any video clips (on the V1) when playing the project in the timeline panel, but I can hear the audio when I preview the video as source in the project area (by double clicking on it in a window at the top left in the editing workspace). I can't find any reference to the audio of the video clip in the Audio Mixer Panel, except when I use the mixer Audio Clip when the image previewed as a source.

  Can anyone help? I have progressed in fact good enough to restore my first project, but this is really frustrating and I can't understand it. Have you tried the search and I can't find any mention of the same show. I hope I am using correct terminology.

  Thanks in advance!

  J

  Read Bill Hunt on Audio compliant http://forums.adobe.com/thread/726693

  - and Source patch http://forums.adobe.com/thread/1442800?tstart=0

  - and a https://forums.adobe.com/message/6725752 FAQ

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 can also help

• Why my windows media player stops playing a video clip when I drag her to a second monitor?

  I have tried to read a video on a second monitor by using the operation drag and drop method. But every time I do the video stops working (even if the sound isn't yet). Is there a download that will allow me to play the video?

  Video takes a lot of memory in the computer to manage, sound does not need as much memory and that's why you will always hear.  Did you check to see that you still have a lot of space memory hard drive?  What are the specifications of your computer compared to what you need to run Media?  Before drag you it to another monitor, it works ok?  You may need to increase the speed of your computer, if not live without doing this operation.

• play several video clips on a timeline using buttons

  Hello

  I'm playing different animations using buttons using the code below, but I get an error. Completely new to Flash, but I'm sure it's something really simple! Anyone got any ideas?

  function goHome(event:MouseEvent):void
  {
  home_animation. Play();
  }
  home_btn.addEventListener (MouseEvent.CLICK, goHome);

  
  function goIntro(event:MouseEvent):void
  {
  intro_animation. Play();
  }
  intro_btn.addEventListener (MouseEvent.CLICK, goIntro);

  When you get errors you should copy and paste the entire error messages in your ad.  Nothing wrong with the code, so it is most likely something to do with objects relating to the code.  You have assigned instance names to buttons and symbols (instance names are assigned in the properties panel, they are not the names of library).

• Can not play the video clips that are emailed to me

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.  What I do when I get this message?

  Hello

  Try to download and install the CODEC pack on the link below - during the installation, accept the default proposals.

  http://www.TechSpot.com/downloads/4787-Klite-codec-pack-standard.html

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Help, please... Flash is ignoring my Video Clip

  I create a slide show on Flash 8 and I want the last slide actually be a video clip. It's a slideshow where images just play themselves, fading and fading, one after the other. No interactivity of the Viewer.
  
  So I imported the .mpg file, I need and set it in the last image in the slideshow. But for some reason any Flash is ignorant. Preview SWF Gets the last frame before the video clip, ignore the video clip and starts in the first frame of the timeline.
  
  The funny thing is, I've done this before and I can't understand what I'm doing wrong this time.
  
  MY LINE OF CONDUCT:
  1 file > import... > import video
  2. in the import of video, under the section SELECT VIDEO dialog, I select 'your computer' and with the ' Browse... '. ", select the desired .mpg file.
  3. in the DEPLOYMENT section, I mark "Progressive download from a web server." I prefer not to embed the video in the SWF file, because the video is about 6 minutes long. What I said 'embed video in SWF and play in timeline' can cause audio sinc questions involving more than 2 minutes long video clips.
  4. in the ENCODING section, I select profile high quality Flash 8 and leave the settings as they are. My encoding settings:
  
  Click here to see the Configuration of the encoding
  
  5. I select 'None' for the SKINNING
  
  6 then I press "Finish" and wait for flash encode my video file. When it is complete the encoding process, in my library I find the FLVPlayback instance and on the stage, is what I assume to be the first frame of the video clip (in my case just a black frame) with a Flash Video icon in the Center.
  
  When I saw the SWF or post - the video is ignored. Flash it jumps just as if he were not there.
  
  I tried to import a much shorter video file and it worked. So I think maybe this has to do with the length. But first, I used the exact same 6 minute video clip in Flash before and it worked fine. Secondly, I don't remember hearing about the problems with video clips of 6 minutes, Flash 8 or so.
  
  I also tried to import the same .mpg to a new Flash document, it set the default image single layer 1. But same result - the video would not play.
  
  I use a PC, quite capable of managing this kind of work. The .mpg file made from a .avi file using Sony Vegas video editing software. He played in all of the media players and seems perfectly fine.
  
  Any ideas? I am really puzzled. The fact that it worked before and suddenly gives me problems is particularly frustrating. Can anyone help?
  
  Thank you

  Are you going to put a stop(); action on the frame with the video? If not then flash will just a loop around the beginning or skip your video file.

• IPhoto to my Macbook Pro doesn't let me play video clips (usually taken with iPhone). I get a message: "Error OSStatus-54."  Anyone know how to fix this? Thank you!

  IPhoto to my Macbook Pro (old version) won't let me play the video clips more (it was). They are mostly of clips to iPhone. When I try to open them I get a dark white page with an error message:

  "Error OSStatus-54".

  Someone has seen this and someone has suggestions on how to fix it?

  It's so frustrating because with most of these clips, that is the only place where I stored them - some clips I get from family members as well... (In iPhoto, I see a picture of the first frame of the clip, but the clip does not play). Even when the new version of iPhoto appeared on my computer, my old version slept and I continued to use the old because I liked it is better (more familiar).  The videos were still on the old version when I got the new version, but they stopped play several months ago. Help! Please? Thank you!

  What version of iPhoto? The operating system?

• Satellite 2430-S255 turns off during playback of video clips

  My laptop Toshiba Satellite 2430-s255 turns off 5 minutes every time I play streaming video clips to web sites using Windows Media Player version 10.0. I have uninstall the version 10 and used version 9, but there is no difference. Computer has 512 meg of memory and 10 GB of additional space on the hard drive.

  There is no problem when I play DVD using the same software.

  Toshiba support has been telling me that cpu is working hard and it heats up because of this problem. I used the fan to circulate the air, but the computer still shuts off.

  Can help.

  Christiane

  HI Fanny,.

  Any graphic activity will tend to make your laptop run more hot and therefore sufficient cooling.

  Make sure that your airway through the CPU radiator is not clogged with dust and debris (a lot of discussions in this forum about this) and also ensure that there is sufficient air under your laptop knife get in the fan air vents.

  HTH

• How to read video clips with LabVIEW in Windows 7?

  I already had the opportunity to play a video clip of my LabVIEW program.  Now, with the same program in the two operating systems, Windows XP and Windows 7, both versions work, but the version of Windows 7 will not be saved.  Trying to save it, I get the following error message: "generic error of LabVIEW.  Cannot save VI... LabVIEW Save 3 error code: FP bunch. "A 2010 version with this problem sampling program is attached. Any help would be appreciated.

  Try this VI.

  It seems that you have a video ActiveX component is corrupted.

• I'm having problems to read video clips also can't send, reply, or forward in hotmail. Any suggestions? Thank you in advance.

  The message "internet explore has stopped working" keeps popping up whenever I want to play a video clip or

  Send, transmit or answer by hotmail.  Any suggestions?  Thank you in advance.

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=1

• How can I list the instances of video clips if the clip that I am referencing is nested?

  Hello world

  It's me again and I am running into a problem. So I have this clip which is nested in several video clips. I mean Flash to perform an action when this clip from movie hits another video clip in the main timeline. It's just a collision for a game detection using the hitTestObject code. I was thinking of using MovieClip (root), but that won't work because it is so nested. Can someone help me? I would like to know if I need to explain more. Thank you!

  -DJ

  I didn't ' think I can help you without having to upload your file to see what you're doing and I don't download and fix the files unless I'm hired.

  Maybe someone else you download your fla and you help.

• Video clips play in reverse in AS 3.0

  Hey all. I change all my files in AS 3.0 because of a few new elements, I would like to use in flash CS4.
  Here: http://www.iaw-atlanta.com/IvyLeague1-13-09.html I have the bottom navigation menu with 4 buttons. When the buttons are speckled on they go up and when they are mottled the film plays in reverse so they go down. Essentially in the clip, I stopped him, and the next frame gotoAndStop when the button is wriggle on and then have a script of saying things reverse when wriggle on. I know how to do this in AS 2.0, but how can I translate the script to 3.0?

  DjPhantasy5,

  > Ok thanks, I'll see what he also has to say as well.

  In fact, NedWebs pretty much nailed. :) The approach you have taken
  is an interesting question, because it evolves all the way back to Flash Player 5.
  has not yet supported the MovieClip.onEnterFrame event. Without
  event, you need something like your "controller" - a separate symbol
  a loop of timeline - to run the code that depends on the loops of the frame.

  Available from Flash Player 6, this event allows you to
  consolidate your code a bit by putting everything in a unique setting and avoiding
  the additional movie clip symbol. This does not mean that your approach is wrong, by
  any stretching. In fact, it's good to know your options, because if you always
  need to publish for Flash Player 5, you had probably better to use the installation program
  you took.

  I'll demonstrate onEnterFrame in just a bit, in case you want to take a
  Watch this.

  > There is no mention of _root in AS3, but you can use a
  > MovieClip (this.parent) (which replaces what _parent)
  (> used to do) to find something outside the immediate
  > movieclip.

  The term "parent" in this context, is technically a property of the
  The class MovieClip, which means all the clips in AS3 have access to the
  feature 'parent', which points to the timeline that contains the video
  in question. Buttons have also a property 'parent '. In AS2,
  property has done exactly the same thing, only it was preceded by an underscore.

  In fact, the proposed codification of the NedWebs works the same in your existin file.
  Instead:

  Your existing code...
  If {(_root.animation._currentframe>1)}
  _root. Animation.prevFrame ();
  this.gotoAndPlay (2)
  }

  If (_root.animation._currentframe<=1)>
  this.gotoAndStop (1);
  }

  ... you can use this:

  Alternative code...
  If {(_parent.animation._currentframe>1)}
  _parent. Animation.prevFrame ();
  gotoAndPlay (2)
  }

  If (_parent.animation._currentframe<=1)>
  gotoAndStop (1);
  }

  ... because this range - in other words, from this point of view - this
  MovieClip._parent property points to the same scenario as _root done.
  That changes, of course, based on how deeply nested the current scope are.
  The word 'this' in the code above is optional, because Flash understand
  What place you are in. From the point of view of the present code, _parent is
  interpreted as referring to chronology parent of the current, just as scope
  gotoAndPlay() is interpreted to the timeline of the current scope.
  You might precede either of those of 'this' or not.

  Many people will say that _root is probably best to avoid, only because
  It's a slippery slope. It does not always refer to the main timeline you
  think he does, according to whether or not your file SWF is loaded in another
  SWF when running. Meanwhile, _parent * always * refers to the immediately
  relative chronology.

  Then, when you look at this way, this perfectly valid AS2:

  If {(_parent.animation._currentframe>1)}

  ... is not very different at all from its counterpart of the AS3:

  If (MovieClip (parent).animation.currentFrame > 1) {}

  It would be nicer if you need convert the parent as a reference
  Movie clip here, but if you haven't, AS3 do not realize that the scope in
  This is a clip.

  > You can string them along like...
  > MovieClip (this.parent.parent)

  Exactly.

  > Your _currentframe in becomes the controller
  > currentFrame. That's all. The rest of what I have
  > saw will fly as is.

  Not quite. AS3 does not support on() or onClipEvent(), functions
  you will not be able to reach your management code for the button. Instead,.
  you will have to put in a keyframe - you can also do with AS2. There
  a good idea, anyway, because it allows to put all your code in a
  place, making it easier to find.

  Here's a quick word on the direct attachment:

  http://www.quip.net/blog/2006/Flash/museum-pieces-on-and-onClipEvent

  To convert your existing AS3 FLA structure, you could, for example.
  follow these steps:

  animation.buttonMode = true;
  animation.addEventListener (MouseEvent.ROLL_OUT, outHandler);
  animation.addEventListener (MouseEvent.ROLL_OVER, overHandler);

  function outHandler(evt:MouseEvent):void {}
  controller.gotoAndPlay (2);
  };
  function overHandler(evt:MouseEvent):void {}
  controller.gotoAndPlay (4);
  };

  That supports the code on (rollout) and executed in your current
  Version. The first line (buttonMode) is necessary because I got rid of
  the symbol button and, instead, handlers directly associated with
  your movie clip. (Video clips manage events of type button, too, if you)
  do not need the button.) In AS3, event handling is very simple:
  you are referencing the object (here, animation), invoke its hereditary
  addEventListener() method, then passes two parameters: a) the event to
  Listening and (b) the function to execute when the event occurs.

  You can see that noted above. In AS2, there are several ways
  to handle events, including one () /onClipEvent (), so it is harder to know when
  to use what approach. For the buttons and video clips, the principle works the
  same I just showed, but the syntax is different.

  Let's take a look to reduce all this code using the
  onEnterFrame event. First of all, check out this AS2 version:

  animation.onRollOut = outHandler;
  animation.onRollOver = overHandler;

  function outHandler (): Void {}
  this.onEnterFrame = reversePlay;
  };
  function overHandler (): Void {}
  this.onEnterFrame = null;
  This.Play ();
  };
  function reversePlay (): Void {}
  this.prevFrame ();
  };

  This code would appear in box 1. You don't need the controller
  video clip. The movie clip contains more an orb button, because
  We use the animation itself as the 'button '. (You can still see what)
  a feature that any object is looking toward the top of its class. If you are dealing
  with a clip, see the MovieClip class. See the position properties
  to find out what features of the object, see methods to know
  what the object can do and see events to find out what the object can respond
  (to).

  In the code above, it is prepared quite easily. It is AS2,
  don't forget. We have two events, we are listening to: MovieClip.onRollOut and
  MovieClip.onRollOver. these events are set up for the animated film
  clip using the name of the instance and associated to custom match
  functions. The outHandler() function associates a different function to the
  MovieClip.onEnterFrame event of the animation clip. Very simply, it
  load of animation to make the custom function reversePlay() whenever
  He meets an onEnterFrame event. The overHandler() function that kills the
  Association of suppression outside and saying animation to play, via the
  MovieClip.play () method. Finally, the reversePlay() function simply calls
  MovieClip.prevFrame () on the movie clip.

  Here's the AS3 version:

  animation.buttonMode = true;
  animation.addEventListener (MouseEvent.ROLL_OUT, outHandler);
  animation.addEventListener (MouseEvent.ROLL_OVER, overHandler);

  function outHandler(evt:MouseEvent):void {}
  animation.addEventListener (Event.ENTER_FRAME, reversePlay);
  };
  function overHandler(evt:MouseEvent):void {}
  animation.removeEventListener (Event.ENTER_FRAME, reversePlay);
  Animation.Play ();
  };
  function reversePlay(evt:Event):void {}
  evt.target.prevFrame ();
  };

  It seems wordier, but if you look closely, you will see that there
  essentially the same thing. The main difference is the scope of operation in
  AS3. In AS2, there are many references to "it", because the event
  Manager operating in the same scope as the object to which the
  Association is formed. In AS3, the references are not to "that", but rather to
  the same movie clip by his * name *, because in AS3, the scope
  works in the same scenario in which the code is displayed (IE, in this)
  case, the main timeline).

  In the function reversePlay(), in order to emulate a 'this' kind of
  the installer, I refer to the parameter that is passed to the event handler all the
  functions in AS3. I happened to name "TTE" (for the event), but you can call
  it what you like. In the case of reversePlay(), the evt parameter refers to
  an instance of the event class, which has a property to target. The target
  property refers to the object that sent the event - is be
  animation, in this case. Then evt.target, in this context, refers to
  animation, that's what I call the MovieClip.prevFrame () method on.

  I downloaded some FLA files to my server. I keep them
  it for always... maybe a few weeks, from this post:

  http://www.quip.NET/RewindTestAS3.fla
  http://www.quip.NET/RewindTestAS3_new.fla
  http://www.quip.NET/RewindTestAS2_new.fla

  David Stiller
  Co-author, ActionScript 3.0 quick reference Guide
  http://tinyurl.com/2s28a5
  "Luck is the residue of good design."