Why my windows media player stops playing a video clip when I drag her to a second monitor?

Similar Questions

• Why observed my windows Media Player flat mpeg-4 video clips of my nokia n7 momile? Ive tried also nokia ovi suite, without success. What are the alternatives to play my clips on the pc

  Why observed my windows Media Player flat mpeg-4 video clips of my nokia n7 momile? Ive tried also nokia ovi suite, without success. What are the alternatives to play my clips on the pc

  Might be interesting to try to download and install a
  the following freeware media players:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (name of the file to download: vlc - 2.0.1 - win32.exe)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (name of the file to download: MPC - HomeCinema.1.6.2.4902.x 86 .exe)

• Windows Media Player cannot play the videos

  Since the last 2 months I find that my Windows Media Player cannot play the videos. After having tried many, I installed the third-party Codec such as GOM Player, GOM DECODER and GOM converter on an experimental basis. For all its operation I installed that for the second time (test period = 1 month). Now, I found some unusual - the entire screen with prop-up Windows began to appear "foggy, unusually large screen, Visuality fuzzy." So GOM was 'uninstalled' in the menu 'program & feature. When he learned from the Microsoft Forum I installed k - lite Codec system. Now, some of my videos recorded under 'Image' menu works fine. But the videos stored in the "library" of WMP is not reacting. I need your advice. Again, in a prop-up window of K-Lite has asked to opt feither for: (i) (ii) repairs, (Iii) remove or change. I opted for changing file Windows Vista Codec - was the selection was appropriate? Should I opt for Vista Codec file repair?

  BASAB ROY, * address email is removed from the privacy *

  Hi SONIA ROY.

  ·         What happens when you try to play videos in Windows Media Player?

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Method 2: Update the latest codecs and look for the question.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My Windows media player cannot play the videos / movies.

  My Windows media player cannot play the videos / movies. When I try to play a video/movie it gives me just the fixed image of the starting part but the sound continues to play. How can I fix it?

  I also tried with VLC media player and all I get is a black screen empty and also the audio continues.
  Help, please
  Thank you.

  Hello
  1. you receive an error message?
  2. What is the file format of videos you're trying to play?
  3. it happens with a particular video or it occurs with all the other videos?

  Method 1:
  Please follow the given link:
  You receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11 (also applies to WMP 12)
  http://support.Microsoft.com/kb/926373

  method 2:
  Update video drivers and check.

  Follow the given link:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  Reduce hardware acceleration and check

  (a) with the right button on the desktop and choose personalize.
  (b) click on display settings.
  (c) in the display settings window, click on advanced settings.
  (d) display the Troubleshooting tab.
  (e) click on change settings.
  (f) to reduce hardware acceleration.

• Windows Media Player stops playing and will not rip

  All of a sudden my windows closed media player just works fine. He'll read that cd is inserted and it will start playing the first song, but after 1 minute and 3 seconds it stops playing and gives me an error of the cd (no cd) is damaged or dirty (BUT I tried two new CD). Also, when I try to rip CDs, it won't work. It tries and then gives errors. I recently got a new driver, and it worked perfectly. I had trouble with my hard drive and had to replace me. This is the first time I tried to use Windows media player to play a cd, since the hard drive replaced and have had these problems. Please please help. I don't know what to do. I works on Windows Vista Edition Home Premium. My computer is up to date on all updates and I'm stumped. Thanks for any help you can provide!

  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try to use the Troubleshoot utility to see if that fixes the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click Windows Media Player settings

• Why my windows media player stops the audio output from my headset in the middle of a song?

  I listen to music through a Bluetooth wireless headset. However, in the middle of songs the audio stops. Windows media player is still playing and audio output continues for 10 to 30 seconds later.

  also, it stops at the end of the songs and takes a few seconds with the new song to restart again.

  Hello

  Method 1.
  Try using a different bluetooth or use bluetooth even on another computer and check.

  Method 2.
  Play the sog directly on your computer and check the output.

  Method 3.
  If the same bluetooth works fine on another computer try to update the drivers bluetooth on your computer and check.

  I hope this helps.

• Windows Media Player Auto played a video without being in the media library, possible?

  I recently opened up windows media player and clicked on play a bit before he had fully charged it, thinking I would play my mp3 library, rather a * video looked to play. I couldn't find the video anywhere on my hard drive. (also * is not seen nor this computer I used, is often used on the internet, it's a family computer) Pourrait that happen to watch a video in my browser on netflix streaming and a wmv file that is attached to the back of the video streaming? Anyway, I have no idea why she would automatically play and not be in the library windows media anywhere. Is this always already arrived to someone else? Thank you!!

  Someone visited questionable sites by the sounds of it.

  Ppersonally I would clean my computer by running my anti virus and especially a malware program such as MalwareBytes.

  Clean the browser cache and cookies to complete sanitation and history.

  Use Ccleaner for that either clean up the history of WMP.

  Parental control software allows to avoid this kind of thing does not happen.

  See you soon,.

  Jerry

• Windows Media Player 11 plays the video in the negative form.

  Windows Media Player 11: Video

  The video played from WMV files fate resembling a negative form of rhe photo. How to return normal image?

  Hi Jim,.

  ·         Since when are you facing this problem?

  ·         You did changes to the player before the show?

  Step 1: Try reducing video hardware acceleration in Windows Media Player.

  a. in Windows Media Player, on the Tools menu, click Options.

  b. on the performance , under video Accelerationtab, move the slider more close votes to zero, and then click OK.

  If this allows you to play videos very well, this indicates that there is a problem with your graphics card or driver.

  Step 2: You can get an updated driver from the manufacturer of the display adapter.

• Windows media player will play the video...

  Movie won't play in windows media player. Opening an AVI Viewer piece rises. The closure of the Viewer to piece that audio is heard on WMP. What could be the cause of this?

  Hi masterkidder,

  1. it happens with all movies you try to play?

  2. did you of recent changes on the computer?

  3. What is the format of the movie file?

  4. are you able to play the movie in any other player?

  5. you receive an error message?

  AVI segment viewer is installed as well as the codec that you install on the computer.

  Check if uninstall you any third-party codec installed on the computer and check if it works.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Media Player will play the video of an MPG file, but it will not play the sound. What is the cause?

  I do video editing.  I transferred my camera video file and Windows Media Player played the video and audio very well at the beginning.  I edited the file with editing software and exported the file again.  Now, the sound will not play using WMP but it will play if I use video editing software.

  As a result, I've uploaded new files from the camera and now WMP not give me sound on those either.  If something seems to be affected by my WMP.  Any help you can give would be much appreciated.

  Hi rgosmond,

  (a) don't you get any specific error message when you play the video?

  (b) what is the file format of the resulting video file after editing by using the video editing software?

  (c) you are able to play the files on the computer? You hear the sound?

  I suggest you try the following steps:

  O make sure that windows MediaPlayer is not muted, press F7 on the keyboard to turn the sound back on.

  Ø check if the volume is at a minimum in Media Player, press F9 on the keyboard to increase the volume.

  Verify that the default audio device is correctly set

  1. click on start, type Sound in the box to start the search.

  2. click on sound in the results of search at the top of the start menu.

  3. click on the tab reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected. Follow these steps:

  4. on the playback tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  5. on the playback tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  6. If the sound settings are well positioned, you are using speakers as the audio device and your speakers are already set as the default device, go to method 5 now.

  7. Select the audio device you want as the default audio device and then click on set as default.

  8. click OK to save your settings and close the sound dialog box.

  Now, check if the problem is resolved.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones Windows Media Player cannot play the videos recorded on Storm 9530

  I have a Windows Vista laptop. My Storm 9530 OS is v5.0.0.419, when I try to watch videos recorded on my Storm 9530, on my Vista computer, I get a message Windows Media cannot play this video (3GP). Is there a way to see these videos on Windows Media Player?

  Hello!

  You need the codec appropriate to do so. I think that QuickTime can be read natively. Or you can search free converters to translate them into a format that WMP will play.

  Good luck!

• Problem with Windows Media Player and MTS to video clips

  When I load my video files MTS (AVCHD) of my Canon Vixia HFS100 camcorder to my PC and try to open and view them in Windows Media Player, I can hear the sound but I do not see the video. What can I do to fix it so I can not see the video?

  Something to try...

  Make a copy of one of your. MTS video clips.

  Click associarions / rename it to? MTS of?. MPG

  Try to play in Windows Media Player.

• Windows media player-Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings.

  I bougth Windows 7 starter, after the installation, I am unable to read the CD/DVD with media player. These messages continue to flow whenever I have CD/DVD slot...

  "Windows Media Player cannot play DVD video. You may need to adjust your Windows display settings. Open display in Control Panel settings, then trylower your screen resolution and color quality settings"I've adjusted manually, no solution, I had use microsolt auto FIX no way." Please help.

  Windows 7 Starter Edition or Basic... does not include a DVD decoder.

  As you can see in the following article... MS recommends
  upgrade to Windows 7 Home Premium, Ultimate or business.
  More features for you... more money for them...

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  It is possible that one of the following freeware
  media players would play your DVD:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  GOM Media Player
  http://download.CNET.com/GOM-media-player/3000-13632_4-10551786.HTML?tag=mncol;2

  Good luck...

• How can I block Windows media player-all function or video?

  OK, I have one of four newspapers-ons in my pc that is locked down pretty tight where the only thing I want to work is word processor (WordPerfect and starting Word version).  My teenage son has impulse control issues, which gives more access means that it is wandering and not on the task.  Theoretically, he likes to play music while working on school assignments (writing) on the computer.  The problem is that apparently in addition to the execution of music files already resident on our pc and external drive, he inserted DVD in the dvd player and movies run (secretly) that are played to use the features of Windows media player.  My preference would be to hell video functionality or the ability to use the DVD drive under this opening of session and leave the ability of audio file.  Is there a way to do this?

  Alternatively, if I install another drive, can I block the video features of a different player and block the drive windows completely?

  Hi Akphoneguy,

  We understand that you want to restrict your teenager using Windows Media Player to play the video file but without impact on music files. However, the feature that you are curious about is currently not available in Family Safety. It can only restrict the entire working application and not a specific feature within the application. If you think that restrict certain features of any application is a convenient feature to have safe family, we suggest that submit you it as a feature request to Microsoft who appreciates your comments and considers that the suggestion of a future versions. Here is the link where you can fill out our feedback form.

  https://feedback.live.com

  In regards to your idea to install a new drive and Windows Media Player blocking completely, as now, we have no information for the player who can perform the function you are looking for. We can only suggest what to look for any media player that may able to do using your search engine preferred.

  If you have any other questions, do not hesitate to reply to this message and we will do our best to help you.

  Thank you.