Play random symbols when you click on the button
First of all, I apologize for not be able to use answers that have already been presented in response to questions similar to this, but none of the positions I have pored over seem to cover what I'm after (unless it's a matter of my failure understand the concept... which may well be the case! Haha!)
Anyway, I have a dozen of symbols animated on stage and I would like a chance to play each time users click on a button.
Advice, or guidance to any Tuts out there, are very welcome.
Cheers in advance
Frannie x
Here's something a little more concise that can help or otherwise be of interest:
var childSymbols = sym.getChildSymbols ();
var r = Math.floor ((Math.random () * 4));
childSymbols [r] .play ();
Add this code to your click handler. Only minor changes are needed if the instances of the button and the symbol are not at the same level of symbol.
HTH,
Joe
Tags: Edge Animate
Similar Questions
-
How to do an audit in the order page IN. When you click on the button "submit"
I want to do an audit in order IN. When you click on the "submit" button, it will be checked whether the OP is reserved and will display the message if not.
I have a CO span from the original, I can know where should I put the logic inside the processFormRequest? and how to write code to control them thanks.
public void processFormRequest (pageContext, OAPageContext,
OAWebBean oAWebBean)
{
super.processFormRequest (pageContext, oAWebBean);
}
OK here is the code below,
String sql = "START: 1: = XXPO_CHECK_RESERVED_PKG." XXPO_CHECK_RESERVATION(:2); END; « ;
CallableStatement cs = txn.createCallableStatement (sql, 1);
String outputval = null;
try {}
cs.setString (2, Segment1);
cs.registerOutParameter (1, OracleTypes.VARCHAR);
CS. Execute();
outputval = cs.getString (1);
TXN.Commit ();
} catch (Exception sqle) {throw new OAException ("Error in the application of staffing", OAException.ERROR) ;}}
-Beginning of the code by Hemant
If ("N".equals (outputval) &! ") ». Equals (outputval))
{
throw new OAException ("The PO isn't in reserved State");
}
-
New inputext when you click on the button
Hi all
I have a table with three fields: ID (pk) and ParameterName, ParameterValue.
In my web form: I do a button, when the user click on the button New Row-> new inputtext two show, they are ParameterName and ParameterValue.
After user entered value for two inputtext-> click Save to insert it into the db table.
Example of a web form like this:
ParameterName: < administrator > ParameterValue: [email protected] >
ParameterName: < member > ParameterValue: [email protected] >
But on my web form must maintain the new value of line in there to inputtext.
Thank you
Take a look at af:forEach and af:iterator
http://jdevadf.Oracle.com/ADF-richclient-demo/docs/tagdoc/af_forEach.html
-
Confirmation message is displayed when you click on the button
We need display a confirmation message when you click a button to notify the user the changes are successful, allow the user to click on 'ok', and then on the home page. The current function uses .setForwardURL to redirect the page to the "Main" page after clicking on a button.
Here is the code of the application currently being used by the controller
' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
{
super.processFormRequest (pageContext, webBean);
OAApplicationModule contactam = (webBean) pageContext.getApplicationModule;
If (pageContext.getParameter ("saveContact")! = null)
{
contactam.invokeMethod ("saveContact");
() pageContext.setForwardURL
'OA.jsp?page=/csxxx/oracle/apps/ak/contact/webui/ContactMainPG '.
null
OAWebBeanConstants.KEEP_MENU_CONTEXT
null
null
true
OAWebBeanConstants.ADD_BREAD_CRUMB_NO
OAWebBeanConstants.IGNORE_MESSAGES);
}Hello
You can display the message after contactam.invokeMethod ("saveContact") as shown below:
If (pageContext.getParameter ("saveContact")! = null)
{
contactam.invokeMethod ("saveContact");
throw new OAException ("Data has been saved.", OAException.CONFIRMATION);
}Sushant-
-
Newbie question-hide/show content of layers when you click on the button
HI guys, I have very limited knowledge of Flash and Action script 2, but I would like to solve this problem.
I have an animation that shows the items highlighted in a diagram. As the elements are highlighted, the audio will play (to explain the animation). because we create for people with disabilities as possible, we have also created captions with text to audio. Thus, in separate layers, we created bubbles and text that is synchronized with the actions of animation on the screen. It is also synchronized with the audio. We want to have a button (button close captioning) when users embed it, they see the text captions and if they push it again, they do not see the text captions.
my questions are
(1) what is the best way to create the effect I'm looking for?
(2) will what order actionscript take for the button actions?
Thank you
That's the problem. When click you on your button the first time, you have set the onRelease Manager. then he works with the following clicks.
to remedy this, use the code exactly as I gave it BUT attach it to the frame of the timeline that contains your key for the button itself.
-
When I go to internet banking as a clydesdale, it opens a new page to connect, but a few days ago it stopped working with the new update. Now when I click on connect, it says "FOUND the document pushed here." and clicking here opens another page of connection, but after being entered the details the page doesn't load. the same thing happens on other sites, on the other, when I click to read the messages page does nothing, and if I click to open in a new tab the same page is displayed instead.
GundamGirl said
Theres been other people having this problem too...
Yes, for example, that this person- https://support.mozilla.org/questions/1078226 -, but they did not post cost around if any suggestion made a difference, I appreciate your following upward.
Here are two other things to check:
(1) connection settings - have they been customized?
"3-bar" menu button (or tools) > Options > advanced
Click the mini network, and then click the settings button
The default value of 'Use system proxy settings' should follow your 'LAN' setting, as well as IE, but you can also try 'No proxy' to see if that makes a difference.
(2) extensions - test Firefox to turn off Safe Mode
Firefox Safe mode is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
Does not work if Firefox: Hold down the SHIFT key when you start Firefox.
If Firefox is running: You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
and OK reboot.
Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).
Any improvement?
-
I have a page with a button and an entry (MIOCAMPO) field that contains a URL. Is possible, in the properties of the button, in the section "when button Clicked/Url target", ask directly the program, take the value stored in my field? For example, for the static value http://www.oracle.com I directly write this address in the "Url target", but, when this address is written in my MIOCAMPO area, ca how? I tried these bad manners:
(1) MIOCAMPO
(2): MIOCAMPO
3) || MIOCAMPO
(4) & MIOCAMPO
I have the button send the page and you can specify MIOCAMPO, use a branch "branch of Page identified by post. This should work for you, that destinations are in the same application. There is also a "branch to URL identified by the element. You could even two handsets using conditions.
Hope this helps
Thank you
-Jorge
-
I was able to do so until the last update... I spent through the process several times since, but without success... including adding the complete URL, etc.. The only suggestion so far is that 1 of my modules could be the cause, but I have still the same as before (they are edge Adblock, S3. Google Translator and yet another Smooth Scrolling)... it's frustrating!... and I'd love some help please... Thank you.
Hi, for reasons of security, 41 of Firefox, you must use an add-on like tab override (browser.newtab.url replacement), to make changes to the page tab.
Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.
Note, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.
You will then need to restart Firefox for all changes to take effect.
If your question is resolved by this or another answer, please take a minute to let us know. Thank you.
-
This is the Web site www.vuzetasrl.com
Sometimes on my mac and even in my mobile.PS It is actually happening to the client and to everyone except me. I can go back even on my phone and I have a samsung. Tried on my iphone of bf and he doesn't either.
Happened to someone?
I can reproduce the problem, but only with safari on Mac, put it works in browsers.
To isolate the problem, can you please post the site in British Colombia as a trial site.
Thank you
Sanjit
-
How can I fix mf_status.exe error messages when you click on the button stop?
- The exact error message:
The instruction at 0x00000000 referenced memory at 0x00000000. The memory could not be read.
Click on OK to terminate the program.
- Operating system Version &:
Windows 7 Home Premium
Service Pack 1
System manufacturer: TOSHIBA
Model: Notebook
Note: 4.1 Windows Experience Index
Processor: AMD Athlon (TM) II Dual-Core Processor 2.10 GHz
Installed memory (RAM): 4.00 GB (usable 3.74)
System type: 64-bit Operating System
Pen and touch: no pen or press enter is available for this view
- Version of the browser &
Internet Explore 10
Version: 10.0.9200.16540
- No software or hardware that I recently installed or deleted
MediaFire Express BETA for Windows
Version: 0.15.4.4888
- Any recent changes I made to the system
I accidentally click the disk wiper in CCleaner. Does this affect my system?
- The things that you have already tried to solve the problem
http://www.pcmaxutilities.com/wikidllfiles/mfstatus-exe-error-fix-Guide.html
I also downloaded: MFStatus.exe files repair tool
Any help will be much appreciated. Thank you! :-)
Hey Ken, COLIENNE,.
Let me to interfere here because I met the same problem, and I followed method 1 suggested by jojo.
And the problem comes from MediaFire Express, even if it is not in beta for me.
Windows Vista SP2.
Hope I helped a bit...
Sincerely,
Bertrand -
Original title: can see more videos on the internet is
Since last week, my computer won't play any video on the internet. When you click on the arrow of reading, it becomes just a black screen. I can always download movies from netflix. I uninstalled adobe Flash Player and reinstalled and still does not work. Someone at - it answers? Thank you!
Hello
Yes, it will work.However, when you try to open something on the internet, it opens with the default browser.Method 1: You can make the default Internet Explorer browser and then perform the troubleshooting steps.Reference:Change the web browser by default
http://Windows.Microsoft.com/en-GB/Windows-Vista/change-your-default-Web-browserMethod 2: Since then, it was working fine before, you can restore the computer to a date when it was working fine.
Reference:System Restore: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questionsIf online videos play fine in Internet Explorer and cause problems only when you play in Mozilla Firefox, you can ask your question in the Forums in Support of Firefox as well:Here is the link: http://support.mozilla.org/en-US/questions/new -
This site requires a username to be filled in a specific area and in another box, you enter a series of numbers generated by a generator of numbers (so not a password - different series each time that you open a session).
However I do not want my user name appears automatically in the first box. Trying to change that in the security settings (extra-options-security), there is a password section where you can choose any exceptions to the rule of the memory (if the box remember is marked). When clicking the exceptions button, the url of the site I'm talking about is not displayed, and it cannot be entered either, since you can't delete here.
When you click on the option "saved passwords", nor the site, nor the username is listed. I think I've read all the help sections regarding usernames and passwords, but found no solution.
How can I avoid this username (so only a user name - not the usename/password combination), appear in the box?Click on the box, hover over the drop-down menu with your mouse, if you select the word you want to delete, and then press the delete key. If Firefox fills automatically in forms of control
-
Hello
Recently, we have brought successfully a BlackBerry 10 Android app.
Everything worked fine, except the thing that when you click on the "Info" button in the action bar that appears at the bottom of the screen - the application crashes.
I guess that this button should display a connection, or the help page. In our application, we have such a page (like an ActionItem in the ActionBar).
Yes, is there a way we can fix it, so that when clicking on "Info" button to view our about page? Or at least to do something to prevent the application from crashing, for example hide this button.
PS: We tested the app in the simulator of Alpha BB 10 Dev.
Thank you.
Hello
Thank you for your comments. In fact, it is a known problem in the current Runtime Android on the Simulator release BlackBerry 10. It has nothing to do with your application, as this action bar fits into the Runtime Android and not your application. Normally when you section the 'Info' button you will see a screen showing you must use the gesture of back scanning used in applications Android Runtime. If you want your own topic button, you need to create your own menu.
See you soon,.
Matt
-
appears when you click on the menu button
Hi friends,
My monitor have buttons and menu items. When I click on the button using wheel, click the fucton button works, but it will also open the menu items.
How can I block the menu item when I press the button.
Thanks in advance...
You must add ConsumeClick to the button.
Code below will help you
Activate is new ButtonField ("activate", ButtonField.CONSUME_CLICK);. -
java.lang.NullPointerException when you click on the search query
java.lang.NullPointerException when you click on the search query:
There is nothing my project involved code...
at oracle.adf.model.binding.DCControlBinding.reportException(DCControlBinding.java:201) at oracle.jbo.uicli.binding.JUCtrlValueBinding.findAttributeDef(JUCtrlValueBinding.java:632) at oracle.jbo.uicli.binding.JUCtrlValueBinding.findAttributeDef(JUCtrlValueBinding.java:597) at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttribute(JUCtrlValueBinding.java:1341) at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$AdfAttributeDescriptor.isRequired(FacesCtrlSearchBinding.java:3018) at oracle.adfinternal.view.faces.renderkit.rich.query.QueryBehavior.shouldShowInstructionText(QueryBehavior.java:66) at oracle.adfinternal.view.faces.renderkit.rich.query.QueryBehavior.refreshInfoFacet(QueryBehavior.java:37) at oracle.adfinternal.view.faces.renderkit.rich.QueryRenderer.renderContentRow(QueryRenderer.java:718) at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:231) at
Cvele_new_account, good point.
Maybe you can try to remove the af: query to the page, and then drop it again.
Maybe you are looking for
-
My finger print sensor does not work correctly as a drink was spilled on the keyboard. While booting, it automatically "fails" 5 times in a row (without any attempt to slide a finger), and then by default at the entrance of password to boot the disk
-
"Fan 1' does not work. on PX2 - 300 d
Hello I recenty had Server NAS PX2 - 300 d but from the GUI, I see this message fan: "Fan 1' does not work. Fan is operating normally, system also shows RPM. I have camera reset and I have latest firmware. Someone at - it question? Thanks for the tip
-
Annoying fan on Satellite P100-227
Hello. The fan inside my P100 is very annoying. He turns and the brief gusts constantly and gets really annoying. I have not used out anywhere yet, but I imagine that if I used it on the train, who I'm sitting then too would get so bored! I've update
-
How to recover my product key for why 2008
It miss a number or letter of the required 25
-
I have Hp Pavilion dv5000ea. I deleted the recovery partition. How can I get/download the Windows XP OEM CD?