Play sounds only 1 time in ENTER_FRAME

Similar Questions

• How to play sound headphone only

  Hey guys and girls

  recently, I bought a new headset, and it seems that windows won't play sounds only in the helmet as long as the speakers are turned on.

  in other words, music plays in the two headphones and speakers and not just in the headphones i unless:
  Unplug the speakers
  Turn them off
  disable them with a ridiculous amount of clicks. funny, is that I always forget how I did the last time >.

  So what I want to do, is make headphones have priority on the speakers without turn it off or unplugged.

  I also can't use the connectors on the front panel for a reason even if they appear in the ' Manager high definition realtek audio.

  Hello

  Method 1:

  I suggest to go to sound settings and turn off the speaker device for the only sound from the earpiece. To do so follow the steps below.

  1. click on Start

  2. go to Control Panel then hardware and audio.

  3. click on sound, it will open a window with all audio devices it contained therein.

  4 turn off the speaker by right-clicking on the " speaker " icon and select disable .

  Method 2:

  To make the helmet of your default audio device, follow the procedure below.

  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new window click on the "Playback" tab and right-click in the window and click disabled devices onShow.
  4. now check if headphone is listed there and right-click on it and choose activate.
  5. highlight this headset and click "set as default".

  It will be useful.

• Sound is played at the first time when it is called by VI

  Hi, I am creating a VI that creates bursts of noise of specific terms in the sequences. My problem is that the sound generation VI only plays the sound the first time it is called. I tried to put VI in a for loop to see if I can get to play several times, but no matter what I do it plays only generated sound once.

  I found the problem. Thank you. The problem was with the timer not reset in the loop (it fixed with a shift register) on second or other calls. Thus, the loop was ignored that the timer has been greater than the value specified after the first time through the loop.

• I have just updated to Windows Media Player 11. I have a .avi file that only plays sound with no video.

  Media Player

  I have just updated to Windows Media Player 11. I have a .avi file that only plays sound with no video. I'll see a message asking me to information center to display information about the file being played. Thank you

  Download codecs here: -.
  http://www.DivX.com/en/software/DivX-plus/Codec-Pack

  Otherwise, you can download and install VLC: -.
  http://www.videolan.org/VLC/download-Windows.html

• the volume control of the sound both play at the same time

  Hello...

  I want to separately control the volume of sounds

  I used a VI of its volume, but it reduces the volume of these two sounds,

  even if the ID of the task of both played sounds are provided separately.

  Please help me for the same...

  Thank you.

  If I'm not wrong, its volume will set the system volume. So, it does not depend on "audio files". I think so...

• How can I configure preview only play sounds when it's over?

  I want to set up as the old RAM Preview. I see no button sound"but that completely stops the sound all the while. I want it to be silent until he finished all the frames loading in the cache then audio playback is possible. I have change the settings drawer, check that each bock checked all icons that makes sense to me. I just set it is like the old RAM Preview. NO noise until it is all caching and then executives play sounds subsequently.

  Check the 'Cache before reading.

• sound only works on some programs

  sound only works on some programs able to get on wmv, audio mp3, all sound tests but still unable to hear any sound on all links. The problem started when the sound volume icon disappeared from the taskbar, also the expander to the taskbar control disappeared at the same time. Place the volume in the taskbar icon is enabled, the icon is still missing from the taskbar. In Manager devices under IDE ATA/ATAPI controllers, that I had 2 primary and 2 secondary channels, try updating the drivers 1 primary and 1 secondary driver do not have be updated because they were later. Other primary and secondary drivers have been updated and listed as primary channel VIA ATE & secondary channel VIA ATE. Both these have an error this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Tried to uninstall & reinstall nothing doesn't. Can anyone help thank you FOR

  Well, punctuation, capitalization, and enablers would help make your readable phost!

  Do you mean that you have no web sounds? If so, make sure "Play web pages" or similar is verified in any browser you use.
  What did you win by dating the ATA drivers?
  You must identify your audio driver and the update.
  Go to the website of your computer manufacturer and obtain the correct drivers from there. If you PC, then go to the MB manufacturers website and get the drivers from there.
  Code 31: you managed to corrupt your audio drivers. Do as above.
  See you soon,.
  Jerry

• All embedded videos in articles of the internet and YouTube play sound but no picture

  My problem started about 2 weeks ago. Before that, I could directly play any video on Youtube or any video embedded in a Web download.
  Now video games, in the sense that I have sound and the time elapsed bar moves along the bottom of the screen, but there is no video, just a complete green screen. This applies to any video on Youtube or incorporated into an internet download.
  I can still play any video I already downloaded on my PC, that this Flash Video or MP4 file.
  The latest versions of Windows Media Player, VLC Media Player, Media Player Classic and Adobe Flash Player players installed on my PC.
  The problem started at the same time there was a major update to my program free antivirus Avast (to the 8.0.1482 version), but it is probably a red herring, as I struggle to believe this might have something to do with the problem.
  I also tried on Internet Explorer and the problem is all the same, it is not specific to Firefox.
  Can anyone offer a solution?
  Kind regards
  Barry

  Thanks cor - el,.
  I have disabled protected mode in Flash, in accordance with the instructions in the link you provided, but it made no apparent difference.
  I can't find how to disable hardware acceleration in the flash plugin. Can you help me here?
  I disable the Shockwave Flash plugin as a trial and immediately videos appararurent again in videos in the downloads on the internet. Why disable Shockwave Flash authorized these photos seem to I don't know.
  It is not practical, however, leave Shockwave Flash off, because many of the embedded videos using Flash so I can't view.
  Kind regards
  Barry

• In input/out live telephone calls have "broken" sound only after updating to iOS 9.3 update on 6, please help...

  All entry/out live telephone calls have 'broken' sound only & unable to play the music on my phone after update to iOS 9.3 update on 6, please help...

  Hi there dmaclatchy,

  It sounds slipped you can not use the app phone on your phone, because the sound is uneven or inaudible and something is happening with your music do not let play. I want to quit all applications running on the phone:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Let us know how it goes! Thank you for using communities of Apple Support.

• Media Player 11 plays sound but no video dvd XP OS

  I have the nvidia decoder installed, but when I try to play a DVD I'm unable to see the video.  Plays sound, but no video.  I'm on Windows XP OS

  Hi Jen,
  seems that all codecs are not installed (normally you should not have to pay for a codec, I would check and make sure that no other only files where installed) done everything, try this:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=507
  hope this helps,
  Eddie B.

• its library files stop playing sound

  Why my Media Player plays a song for a few seconds and then sound stops but continues to play the song. (the bar at the bottom of the window that shows continuous progress to go as if it was when he played sound)

  Hello

  ·        You get an error message when the audio stops playing?

  ·        Since when are you facing this problem?

  Method 1:

  See also the link below to run the fix to fix common problems with audio in windows vista:

  http://support.Microsoft.com/mats/NO_SOUND/

  Method 2:

  If the problem persists only with Windows Media Player, then you can try to uninstall and reinstall Windows Media Player, to do this follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 3:

  You can also try to update the audio drivers for your system and check if it helps resolve the issue.

  For more information on updates to the drivers, please refer to the link below:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• AVCHD (.) MTS video) shot in sony camera do not play sound in windows media player.

  AVCHD (.) MTS video) shot in sony camera do not play sound in windows media player. Help, please

  I've converted these videos to .mp4, avi and wmv formats and get her. but the problem is that when I change it (trim) in windows movie maker and save it don't get no video but sound only. my pc is windows 7 32-bit basic family. someone can really help me
  Thank you
  Jubin

  Sorry, I read the first line and the title, the ' AVCHD (.)» MTS video) shot in sony camera do not play sound in windows media player. Please help' and misread the rest.

  United Nations marks my post as being the answer or people focus may not be on a position of answers.

• Windows 7 is not play sounds on the Internet on Bluetooth speakers

  Windows 7 connects to Bluetooth speakers, play sounds from the computer and iTunes, but does play no sound internet radio, UTube, etc... Someone knows how to fix this? Thank you!

  Thanks for getting back to me so quickly.  The problem was not related to applications of inhibition, as my speakers would not play sound from ANY internet site whatsoever, even when the volume of the app contributed to the maximum, but he would play his wireless from iTunes and other internet applications no.  After that I restarted my computer this morning, the problem has been resolved.  I have restarted my computer several times yesterday, with no resolution.  I wonder if I got a Windows 7 update during the night which fixed the problem?

• Get 2 SWFs to play at the same time?

  I have two sovereigns on the same web page and I am trying to get them to play at the same time only by clicking on one of them. How to make this happen?

  You can try to use the LocalConnection class:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/NET/LocalConnecti on.html

• Show only the time and a red relief

  My watch does not show the clock face. If I press the bottom button, it will display the time and a symbol of red light.

  Hello

  Your watch has a low battery charge level and entered into mode of power reserve.

  This mode displays only the time when you press the side button, in order to keep this service as long as possible.

  You will need to exit this mode, press and hold the side button. However, you need to charge your watch first. Allow up to 2.5 hours for a full charge.

  More information:

  With the help of power reserve - Apple Support