Player D says full
Drive D is red, upward did not finish. How can I clean drive D? Can I set back ups/set points to remove the oldest so this never happens again?
The way you wrote, this indicates that your drive D: is your recovery drive.
If you click Start > computer and see something like mine in screenshot, it is a recovery disk.
I have bad news for you... You are NOT supposed to make backup files in drive D, and you should put something in it. You are supposed to leave him alone.
Recovery drive has an image of the system as it came from the factory. It is used to restore your computer when it crashes.
I don't have a full knowledge of how to correct the situation, as in how to remove files that are not supposed to be there.
You will need expert help.
Meanwhile, please buy an external hard drive and use it to make the backup of files. Ext. drives today are pretty inexpensive. It can be done for under $100 Canadian. If you are in the United States, it might be even cheaper
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
Tags: Windows
Similar Questions
-
Original title: Windows Media Player
I can't run a dvd on my computer. When I insert the dvd, a window pop up and ask 'run with Windows media player '. When I select this option, the player turns on full screen, but the dvd movie is in the upper left corner 1/8 the size of the player and no sound.
Help, please
Thank you Tim
Hi Tim,.
Have you downloaded or purchased Codecs for the DVD player?
-
Why media player out of full screen every 10 minutes
Why windows media player out of full screen every 10 minutes
HelloFollow the steps in troubleshooting this article and check if that helps.Windows Media Player may suddenly exit full-screen Mode
-
iCloud drive is empty but its says, full!
Hello Apple
My iCloud (5 GB) says its full.
When I try to make any Document or whatever in this document, the iCloud drive
said: ' full - please delete something! ». my details are 2.7 GB FREE!
I had No backup iPhone or everything that is done in the player. My mailbox use only 2.3 GB.
I use the account + exchange data for 10 years without problem (me.com) until today.
What can I do?
Help, please.
AN apple article is there, you can follow: manage your iCloud - Apple Support storage space
-
Firefox is our main source of internet but when I try to watch videos on the BBC website, it says that I must first download Adobe Flash player - when I try to do, it stops, indicating that I must first leave Mozilla Firefox - can you please help? Thank you
Close the firefox window, and the installation should continue. Or, press CTRL + ALT + DEL, find firefox.exe in the process and end it by selecting it and pressing del
Then it should continue. If this isn't the case, close the flash installation window, make sure that firefox is closed, then re - open. -
Original title: HOW can I SEND YOUTUBE VIDEOS in MEDIA PLAYER {IT is SAID EXTENDING the WILL NOT AND cannot DO}
I have a few videos that I found on youtube and want to send them to media player, so I CASN telechargez_ them to my mp3. It says invalid file extention.
The media player is to tell you that you do not have the codec for the file extension, you try to play. Download and install the package of codec HERE.
-
Windows Media Player 11 says wrong region to play DVDs purchased in the United States - why?
I apologize in advance; I'm sure that this question has been asked many times before, but I have been searching Microsoft for two hours and I'm frustrated that there is no clear answer.
I'm in the United States the computer was purchased from the United States the activated, legal Vista Home Premium is on U.S. time and language settings. The DVD was purchased from the United States and the seller (Amazon, a reliable company) confirmed to me in writing that it is meant to be played in the United States the region on my player says DVD region 1. All settings are enabled by default. Media Player 11 is updated as part of the Microsoft Windows automatic update service.
Why won't she, and why the error message:
"Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »
I would appreciate it very much if someone could point me to a specific answer, as vain hours clicking on the links on the immense site of Microsoft have resulted in nothing relevant. Thank you very much.
I apologize in advance; I'm sure that this question has been asked many times before, but I have been searching Microsoft for two hours and I'm frustrated that there is no clear answer.
I'm in the United States the computer was purchased from the United States the activated, legal Vista Home Premium is on U.S. time and language settings. The DVD was purchased from the United States and the seller (Amazon, a reliable company) confirmed to me in writing that it is meant to be played in the United States the region on my player says DVD region 1. All settings are enabled by default. Media Player 11 is updated as part of the Microsoft Windows automatic update service.
Why won't she, and why the error message:
"Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »
I would appreciate it very much if someone could point me to a specific answer, as vain hours clicking on the links on the immense site of Microsoft have resulted in nothing relevant. Thank you very much.
=====================================
You can change the region but only a few times, then
you're stuck... so this isn't a good idea.Windows Vista - change DVD region
http://grok.LSU.edu/article.aspx?articleid=2334Have you tried the DVD on a different drive... just like a
experiment?FWIW... Perhaps the media player freeware at the following address
be worth a try... it will play anything:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)VLC Media Player
http://www.videolan.org/Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
My Media Player 11 says I need a "codec".
I have Vista, and my Media Player 11 won't play CD because he says that I don't have the required "codec" installed. However, I can't find one who will install. I have already installed a patch/file that is supposed to fix the file installation problems, but this has not solved the problem. I was at this for hours. Where and how can I find the correct codec file? I want to just listen to a CD while I do my homework, and it became a project greater than my homework project.
Sandy
Hello
Thanks for posting your question in the Microsoft Community.
From your problem description, I understand that you are unable to play the cd in Windows Media Player11. Please let me know if this isn't the problem that you are experiencing.
Before troubleshooting, I have little information on the issue.
1. What is the error message that is accurate or complete?
2. did you of recent changes to the computer before this problem?
3. What is the number of brand and model of the computer?
Try the methods and check after each method:
Method 1: Run the Fixit:
http://support.Microsoft.com/mats/windows_media_player_diagnostic
Method 2: Codecs: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!
It will be useful.
-
I had the old flashplayer 10 on my laptop but it says: I need the new Flash Player 11 to watch movies or video now.but it won't let me download guard .he stopping in the middle of the download and say something stopped her, but not that
Hello
Try to uninstall the old version of Flash before you try to install the new version; the uninstall to the provided link information:
http://kb2.Adobe.com/CPS/141/tn_14157.html
Then try to download the latest version of Flash, making sure that you uncheck the Google Toolbar download option there:
http://get.Adobe.com/flashplayer/
See you soon.
-
Windows Media player 11 says I'm missing codex, how do you know what Miss me?
I have Windows Vista, I am trying to use to use Windows Movie Maker, some of my videos are downloading on the site, and some are not say C:\Users\Momma Kerri\Desktop\Movie 52. mov could not be imported OR I do not have the law codex. Help, please.
Hello
Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questionsAll you need is good Codec - get these if 32-bit.
-Free - CCCP also get free tool of insurgents
http://CCCP-project.NET/FFDSHOW - free
http://sourceforge.NET/projects/ffdshow/Check here:
Plug-ins for Windows Media Player
http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx---------------------------------------
VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.
VLC - free
http://www.videolan.org/VLC/-------------------------------------------------------------
If 64 bits and you need codec.
Read this 1st and go that route, or use the one below. (Vista or Windows 7)
http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html
--------------------------------------------------------------------
If 64-bit - can run WMP in 32 or 64 bit mode.
Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.
For 32-bit use these - OR the 32 bit ones listed above which I prefer.
K - Lite Codec Pack 8.0.8 (or newer)
http://www.codecguide.com/Use them for 64-bit:
K - Lite Codec Pack 5.5.0 (64-bit) (or newer)
http://www.codecguide.com/-------------------------------------------------------------
You know that you use WMP 32 or 64
Change, modify or value 64-bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default (or WMP12 - Windows7)
http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/-------------------------------------------------------------
And you can use it when necessary because no codex is usually required.
VideoLAN - VLC media player
http://www.videolan.org/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: windows media player
Whenever I try to download songs on my mps I do not sync my songs. Whenever I click on the button of synk sart on Windows Media Player little pop box saying "Windows Media Player has encountered a problem during the synchronization of the file to the device. For additional assistance, click Web Help. "and when I click web help it does not at all help me please someone help me!
Hello1. with the device that you are trying to synchronize?
2 - is the first time you try to sync Windows media player?Windows Media Player has encountered a problem during the synchronization of the file to the portable device. Because this error can occur for various reasons, there is no single solution.To resolve the problem, try to disconnect and reset. See your device manual for specific instructions on performing this procedure.In some cases, this error may occur if you try to synchronize a file hidden on a device. To resolve this problem, delete the file in the sync list or change the properties of the file so that the file is not hidden.For more information, see the article below,
http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179 -
I am trying to add music to video, that I created on Windows Media Player... When I select the song in my Itunes list it says file not found. Don't know why he is here... somewhere! Any tips?
Because Windows Media Player cannot create videos I have
assume that you are talking about Windows Movie Maker.Try to browse to your music folder and see if you can
Add a music file to your project. If you have problems
You may need to convert the music file to the. WMA
format before importing. -
Windows Media Player 11 says disc not empty when you try to burn
When you try to burn on my home computer with Vista and also computer work with XP, two media players say that the disc is not empty when you try to burn and put back a white disc. Sometimes, it will finally work after multiple attempts; sometimes not!
Hi doodle75,
You try to add data to a multisession CD - R or CD - RW in Windows Media Player 11?
If you attempt this task, this problem occurs because Windows Media Player 11 does not support multisession recording. You receive this message if the CD you are trying to record already contains data.
To resolve this problem, save the data to a new CD - R or CD - RW.
Reference:
You are prompted to insert a blank disc when you try to add data to a multisession CD - R or CD - RW in Windows Media Player 11
http://support.Microsoft.com/kb/930370
Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".
http://support.Microsoft.com/kb/927814
Please see the link below for more information
Burn a CD or DVD in Windows Media Player
Solve problems in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
When I place a disc in my CD - DVD player, it says that it cannot read the media.
I use a Windows 7 computer and everytime I put a DVD in the drive, it says that it cannot read the disk media. I tried to uninstall and reinstall it, I also tried the Player update. The computer realizes that the drive is in the computer, but it will not play any DVD or CD. Anyone know how I can get running without having to disassemble the computer?
Clean the disc with a DVD cleaning disc, available in most stores and retail businesses. If this fails so that the reader has probably not and must be replaced.
-
Whenever I went online Adobe pops up saying that want to store web content outside of protected mode. She appeared almost every second that I allowed or refused it. he wouldn't leave me alone. FINALLLY I uninstalled the adobe flash player. When I went to watch the program online, he said that I needed the latest version of adobe flash player. I tried to reinstall it but it keeps saying that I already have the latest versio. It shows nowhere I have adobe. help please
Hello
-What browser do you use to watch videos online?
-If you use Internet Explorer, then what is the version?
I suggest trying the following steps if you are using Internet Explorer and check to see if it helps.
Method 1:
Disable the add-on Adobe Flash player in Internet Explorer.
a. click Start , then type inetcpl.cpl in the start search box and press ENTER.
(b) this will open the Internet Options window.
c. click programs , and then select Manage Add-ons.
d. select toolbars and extensions and click on display all add-ons.
e. disable all Adobe products, you see in the list, and then press ok and close the Internet Options window.
For reference:
How to manage add-ons in Internet Explorer 9
http://Windows.Microsoft.com/en-us/Windows7/how-to-manage-add-ons-in-Internet-Explorer-9 (This link is also applicable to Internet Explorer 8)
Method 2:
Run the uninstall program to install fixit
a. run the fixit for the link. Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
b. follow the onscreen instructions.
c. when requested, select the option: detect problems and apply the patches for me (recommended).
d. click Next.
e. Select the Option: Uninstall.
f. in the open list, choose Adobe flash Player and click next to uninstall.
Once the adobe flash player is uninstalled, restart the computer and then download the latest link Adobe flash player.
http://get.Adobe.com/flashplayer/
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
If it fails, then run Internet Explorer and check
Method 3:
Reset the Internet Explorer settings.
http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
Let us know the results.
Maybe you are looking for
-
Error when run through the function of path to add-in with writing to the amusement of the worksheet
Hello world I wondered why the error no. 7 is coming as being attached, when I run the program. My intention is to write (from the FIFO) data in the worksheet by using entry for measuring function. I connected 1 d table at the entrance of table 1 d o
-
How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?
-
Install a second SSD in V15 VN7 - 592G possible?
Dear all, I have a VN7 - 592 G - 747C that came with a 1 to + 8 GB SSD Toshiba HDD. Is it possible to add a second SSD to this laptop? If not, is it possible to replace this HARD drive with an SSD? I looked around and I saw that we could run into pro
-
I finally have my xbox 360 connected to my computer but now it won't connect again and I get a code for niput but cannot find where.
-
Windows 7 print spooler keeps stopping
Windows 7 preinstalled Dell. Two printers installed on the system (HPLaserJet1300 and Scanner/printer Dell 922). Both printers worked well for ~1.5 months. Suddenly, print spooler continues to stop. I can't remove printer drivers to try to reinst