PlayerListener.ERROR eventData is 5 PlayerListener.ERROR but eventData = 5 "

Similar Questions

• Thunderbird on Windows 8.1 sends a message without error, but the mail is not delivered.

  New laptop Toshiba current A6 running Windows 8.1. Installed Thunderbird 31.6.0. Configuration completed successfully. Am able to receive the mail, but cannot send. When I send mail, I see the message "connecting to Server" and "mail sent successfully." I DON'T GET ANY KIND OF ERROR MESSAGE. Mail is never with the server.

  The automatic configuration of Thunderbird sets out to "SMTP.lakeland.ws" port 587 server. After several failed attempts to send a mail to "[email protected]" myself, I've reconfigured the SMTP outgoing, based on the configuration of my Windows 7 Windows Live Mail on another laptop: "mail.airstreamcomm.net" Port 25.

  When I sent mail with this setup I was prompted for the password for my mail server. I gave the password and mail appeared to send. NO ERROR MESSAGE and mail went to the sent queue. Subsequent attempts seem to send the email with the MESSAGE of NO ERROR but never gets the mail on the server Lakeland.ws .

  I then remove the account from Thunderbird and launched the automatic sequence of configuration to set the settings back to the original configuration. Still have the problem

  Help, please!

  Try to send a mail to [email protected]. I will answer you if I understand, and I think I'll

• Firefox answers more frequently. I have several reports of errors but don't know what to do with them.

  I have several reports of errors, but I don't know how to reach them. I hope someone can help me with this all out.

  Have you checked this thread?
  https://support.Mozilla.com/en-us/questions/859406

  I had a similar problem, and he treated this thread.

• Attempts to cancel the issue of the iTunes Store, I bought by the error, but it shows me massage like this: this purchase is not eligible for a refund. Please I need help. Thank you

  Try to cancel an article that I bought by the error, but the end of any process it says this: this purchase is not eligible for a refund.

  How can I cancel or refund this purchase?

  Thank you!

  Purchases are considered final (especially if they have been downloaded), if 'report a problem' does not (http://reportaproblem.apple.com) you can try to contact iTunes support via this page and see if they will refund/credit you: http://www.apple.com/support/itunes/contact/

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• I want to force a sequence to fail on an error, but also a failure

  I want to force a sequence to fail on an error, but also a failure.  It came because the only way I can find to stop the dialogues of Labview error to arise in TestStand is to use the property to ignore errors of time run on a step. I don't want these dialogues to occur because operators do not know how to deal with them. The problem with using the property to ignore Run Time Error, it now is a step that had a runtime error will not kill the sequence. I really want to interpret a mistake as a failure.

  I found a link to this same question years ago and the answer seems reasonable.  See http://forums.ni.com/t5/NI-TestStand/Force-TestStand-Step-to-Fail-When-Error-Occurs/td-p/435510.

  In this post, I found the following: "use the SequenceFilePostStepRuntimeError callback sequence. In this sequence, set Parameters.Step.Result.Status = 'Fail' and Parameters.Step.Result.PassFail = False ". But when I pull up the reminder SequenceFilePostStepRuntimeError, niether of these parameters have on the list of parameters. I have Parameters.Step and Parameters.Result, but nothing filled under these broad categories.  I don't know if I have a Setup error, or if the reminder has been changed over the years.

  Someone at - it advice?

  Thank you

  Dave

  Put a breakpoint in your sequence a little after the step and check the runstate variables to see if they match. This post was made in 2006 and there are a lot of changes since then. Adding in the breakpoint should allow you to see what variables are created at run time, as the passfail. You can then enter in the browser of the expression. When chacking the statement, you will get a warning saying that the syntax may be incorrect, but it's nice. It is also said in this post if you know what you are doing to the variable may be created when running and you will be fine.

• When I try to extract from a CD, it begins to tear, but after about 20%, it is up to the error, but no code error

  original title: Help with Media Player

  I have problems with the Media Player.  When I try to extract from a CD, it begins to tear, but after about 20%, it is up to the error, but no code error.  Is it necessary to habve a network.  I have one and am wondering if I need or is it why extraction will not work?  I don't know where the network came, but if I need it how to remove it

  Hi Nanabarb,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the format of the files you are trying to extract?
  3. do you get an error message?
  4. the problem occurs with any particular drive?

  I suggest you to see the following links to make sure that the check-out settings correct. You don't have to be on the network.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Extract music from a CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  Rip music: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions

• Hard drive error, but passes diagnostic

  I have a vostro 320 all in one computer. Yesterday he left initializing with a hard drive error, but when I run the hardware diagnostics all past. When I go into the installer the Bious does not see the hard drive. Current Bious is 1.2.0 and current is 1.4.0.

  If the BIOS does not see the hard drive, no - you will need to replace the disk.

  You can take a chance on the resettlement of the player (unplug the system and disconnect and reconnect the hard drive), but if so, it is not detected by the system, it is toast and needs to be replaced.

• The macro was interrupted because of an error, but the file remains open.

  I have a file that is opened by a macro Excel (VBA).  The macro was interrupted because of an error, but the file remains open.  I can't find any way to close.  The file is located on a server, not my hard drive.

  This is the code that opens the file/workbook

  Dim fso As Object
  Set fso = VBA. CreateObject ("Scripting.FileSystemObject")
  TT = fso. CopyFile (Sheet1.Cells (2: 17) & "List1.xlsm", Sheet1.Cells (2: 17) & "Merge1.xlsm", True)

  'bind to the data source document.
  wordDoc.MailMerge.MainDocumentType = wdFormLetters
  wordDoc.MailMerge.OpenDataSource Name: = Sheet1.Cells (2, 17) & "Merge1.xlsm", _
  SQLStatement: = "SELECT * FROM ' Sheet1$ ' WHERE sort_order IS NOT NULL" "
   
  "fill the body of the document with the fields in the data source."
   
  "first of all get the field names in the spreadsheet
  Set wkbk = Excel.Workbooks.Open (Sheet1.Cells (2: 17) & "Merge1.xlsm")
  Set headerRange = Excel.Range (wkbk. Sheets ("Sheet1"). Wkbk, Range("B1"). Sheets ("Sheet1"). Range ("IV1"). End (xlToLeft))
  headerValues = Application.Transpose (headerRange.Value)
  wkbk. Close False

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Database will return no error, but does not delete the table

  Hello

  I'm developing an application that uses a database (SQLite). I would like to delete and re-create a table in the database (this table is the kind of a cache).

  When I run the following code, I get no error but chrome / ripple-> resources-> "Web SQL", I still see the old structure of the table.

  Do you have any idea what the problem might be or how I can solve it?

         db.transaction(
              function (tx) {
                  tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  for (var i = 0; i < oPerson.length; i++) {
                      tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")');
                      iUsers = iUsers + 1;
                  }
              }
  
          );
  

  Thank you very much

  Roberto.

  Hello Roberto,

  There was a problem with your INSERT INTO string where you have provided additional value which did not exist as a database column. Change

   oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd
  

  TO

   oPerson[i].Phonenumber + '", "' +  oPerson[i].Emailadd
  

  Here's a complete code that must run:

  var db = openDatabase('mydb', '2.0', 'Test DB', 4 * 1024 * 1024);
  var iUsers = 0;
  var oPerson = [{Firstname: 'Joe',
      Lastname: 'Smith',
      Phonenumber: '1800CALLJOE',
      emailadd: '[email protected]',
      Company: 'Photojam'},
      {Firstname: 'Jack',
      Lastname: 'Smith',
      Phonenumber: '1800JACK999',
      emailadd: '[email protected]',
      Company: 'Photojam'}
      ];
  db.transaction(
              function (tx) {
                  tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  for (var i = 0; i < oPerson.length; i++) {
                      tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")');
                      iUsers = iUsers + 1;
                  }
              }
  
          );
  

  Let me know if there are problems!

  See you soon,.

  James

• QML no compilation errors, but a run-time error, how to debug?

  Code QML without compiling error, but not show debug in C++ code show that qml-> hasErrors() took, but the I don't know what error cause of line. any ideas? I am looking for debug QML, but it seems only break in javascript, don't create not procedure.

  Momentics you need to open a "QNX Outlook Information System" [window-> open point of view]

  Right-click on the target and select "start SSH session".

  In this SSH session, after logging in, type ' slog2info w | grep ' 9000' '

  Look for a message on the QML problem.

• Creative cloud installation runs. No error, but it does not install. 19gigs of free hard disk space. What is the question?

  The title says it all.

  Creative cloud installation runs. No error, but it does not install. 19gigs of free hard disk space. What is the question?

  Uninstall anything cc which can be installed.

  clean cc by the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Restart the cc desktop application installation, https://creative.adobe.com/products/creative-cloud

• Have you had to face the problem, that there is no an error but just can't open Lightroom app on your computer? I have a photoshop, but not Lightroom work and plan creative cloud...

  Have you had to face the problem, that there is no an error but just can't open Lightroom app on your computer? I have a photoshop, but not Lightroom work and plan creative cloud... Almost all tried, nothing does not help and may not always know where the problem...

  Windows. I just did a cover on my pc and reinstalled cloud once again, now everything seems ifne, thank you

• I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  How do I get this project on a B

  I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  What should I do to get this project on a BluRay disc?

  In response to both Richard & Stan.  I received the error message ""device error", Code '3' notes Create Sequence of STC: cannot write file M25.»  Or something very similar to this, but I think it was exactly that.  It was my first HD project but used several times to make projects sustainable development without problems that were not of my own creation.  So it was a shock and cost me money and the failure to meet a deadline.  What I did: on-screen 'Build '.

  Format: Blu - ray,

  Output: Blu - ray Image,

  Source: Currrent project,

  Destination: I Browse... d a location appropriate.  He managed a Blu - ray image.

  Using reminder once again, step 2 - on-screen 'Build '.

  Format: Blu - ray,

  Released: Blu - ray Disc,

  Source: Disk Image,

  Destination: my disc drive that holds a blank Blu - ray disc.  He managed a Blu - ray disc.

  Then I found a job step 2 autour for the problem.  My question is this: I pay $70.00 / month ca to the people Adobe cloud to keep their software up to date and work as advertised.  I do not think I should spend a few hours and lose money looking for a problem created Adobe not yet keeping cs6, updated and works as promised.  I submit my first bug report.  My suspicion is that adobe considers that Blu - ray is out of style, and they do not care to correct this bug in still cs6.

  I'd love to know the thoughts of others on this.

• "Some files to sync failed" error, but "creative cloud works normally. What should I do?

  CC gives me an error "some files not has not not synchronize", but when you click on the link, it takes me to https://status.creativecloud.com/ who says that everything is working normally. So why give me an error, but no solution? Why don't synchronize my files? How dio I solve this problem?

  If you're on MAC, open the utilities activity monitor.

  Then check if you get coresync is not responding error.

  Exit Office Coresyc also leave cloud creative Activity Monitor

  then restart and check.

• no error, but nothing shows up - function main wrong?

  Hey, I'm compiling this program and I have no error but the applet shows, then disappears without showing anything! It should show 2 clocks!

  import java.awt.*;
  import javax.swing.*;
  import java.util.*;
  
  public class StillClock extends JPanel {
    private int hour;
    private int minute;
    private int second;
  
    public static void main( String arg[] ) {
          StillClock SC = new StillClock(4, 20, 45) ;
          StillClock SC2 = new StillClock(22, 46, 15) ;
      }
  
    /** Construct a default clock with the current time*/
    public StillClock() {
      setCurrentTime();
    }
  
    /** Construct a clock */
    public StillClock(int hour, int minute, int second) {
      this.hour = hour;
      this.minute = minute;
      this.second = second;
    }
  
    /** Return hour */
    public int getHour() {
      return hour;
    }
  
    /** Set a new hour */
    public void setHour(int hour) {
      this.hour = hour;
      repaint();
    }
  
    /** Return minute */
    public int getMinute() {
      return minute;
    }
  
    /** Set a new minute */
    public void setMinute(int minute) {
      this.minute = minute;
      repaint();
    }
  
    /** Return second */
    public int getSecond() {
      return second;
    }
  
    /** Set a new second */
    public void setSecond(int second) {
      this.second = second;
      repaint();
    }
  
    /** Draw the clock */
      @Override
    protected void paintComponent(Graphics g) {
      super.paintComponent(g);
  
      // Initialize clock parameters
      int clockRadius =
        (int)(Math.min(getWidth(), getHeight()) * 0.8 * 0.5);
      int xCenter = getWidth() / 2;
      int yCenter = getHeight() / 2;
  
      // Draw circle
      g.setColor(Color.black);
      g.drawOval(xCenter - clockRadius, yCenter - clockRadius,
        2 * clockRadius, 2 * clockRadius);
      g.drawString("12", xCenter - 5, yCenter - clockRadius + 12);
      g.drawString("9", xCenter - clockRadius + 3, yCenter + 5);
      g.drawString("3", xCenter + clockRadius - 10, yCenter + 3);
      g.drawString("6", xCenter - 3, yCenter + clockRadius - 3);
  
      // Draw second hand
      int sLength = (int)(clockRadius * 0.8);
      int xSecond = (int)(xCenter + sLength *
        Math.sin(second * (2 * Math.PI / 60)));
      int ySecond = (int)(yCenter - sLength *
        Math.cos(second * (2 * Math.PI / 60)));
      g.setColor(Color.red);
      g.drawLine(xCenter, yCenter, xSecond, ySecond);
  
      // Draw minute hand
      int mLength = (int)(clockRadius * 0.65);
      int xMinute = (int)(xCenter + mLength *
        Math.sin(minute * (2 * Math.PI / 60)));
      int yMinute = (int)(yCenter - mLength *
        Math.cos(minute * (2 * Math.PI / 60)));
      g.setColor(Color.blue);
      g.drawLine(xCenter, yCenter, xMinute, yMinute);
  
      // Draw hour hand
      int hLength = (int)(clockRadius * 0.5);
      int xHour = (int)(xCenter + hLength *
        Math.sin((hour % 12 + minute / 60.0) * (2 * Math.PI / 12)));
      int yHour = (int)(yCenter - hLength *
        Math.cos((hour % 12 + minute / 60.0) * (2 * Math.PI / 12)));
      g.setColor(Color.green);
      g.drawLine(xCenter, yCenter, xHour, yHour);
    }
  
    public void setCurrentTime() {
      // Construct a calendar for the current date and time
      Calendar calendar = new GregorianCalendar();
  
      // Set current hour, minute and second
      this.hour = calendar.get(Calendar.HOUR_OF_DAY);
      this.minute = calendar.get(Calendar.MINUTE);
      this.second = calendar.get(Calendar.SECOND);
    }
  
      @Override
    public Dimension getPreferredSize() {
      return new Dimension(200, 200);
    }
  }

  Edited by: Christopher on May 28, 2011 03:05

  How do you run that? If you run it as a normal program via main(), I expect that it ends when the hand ends.

  You are creating two JPanels but does not create a window frame/for they appear in. If you try this

  JFrame frame = new JFrame();
  frame.setLayout(new FlowLayout());
  frame.add(SC);
  frame.add(SC2);
  frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
  frame.pack();
  frame.setVisible(true);
  

  You will see a window with your clock in them.

  Published by: Peter Lawrey may 28, 2011 12:40