playing video lessons stalls every 10 seconds, then play again, cycling in and out

I can't get my school video cooking class to play along without stalling.  I'll have a minute in a lesson, stall; Then he played again for a short period.  Just frustrating.

Videos play at a certain data rate.  If the rate they're playing faster is the rate you receive the data on your internet connection and then the video will pick up until a buffer fills to a certain extent - date at which he will resume.  If the buffer empties faster that it fills up the Internet, it will pick up again.  If you look at this in Windows Media Player, see the Options menu for a performance parameter, and make sure that your internet connection speed indicated it is not faster than your actual speed.  The only other alternative is to get a faster internet connection.

HTH,
JW

Tags: Windows

Similar Questions

  • When the Streaming of videos they pause every few seconds

    When the streaming videos that they play for a second then stop.  I don't know how to fix this.  I have Toshiba Satellite laptop, it is new and has a lot of disk space

    Hi RaeMyers,

    Welcome to the Microsoft Vista answers Forum!

    May I ask how you are actually streaming videos, it is using Internet explorer or Windows Media Player?

    Have you been able to stream the videos before without getting any error messages?

    Can I know the version of Internet Explorer on your computer? Can I also know the speed of the internet connection?

    Additional information:

    What can I do about video problems, such as green or pink lines that appear in the video, flickering or choppy video, the player is not responding when playing video, and so on?

    http://windowshelp.Microsoft.com/Windows/en-us/help/3519fc03-7f06-476F-A553-dcb5d4284e191033.mspx#etc

     

    The problems with playing videos in Windows Media Center

    http://windowshelp.Microsoft.com/Windows/en-us/help/70e00426-CCC3-4045-8488-8bd9a3662b5f1033.mspx

    Let me know if this information was helpful.

    All the best!

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Video/Audio renders for 4 seconds then stops

    Project opens a fine.  Press the SPACEBAR to play, he plays the video and audio very well for about 4 seconds and then stops.  SPACEBAR for success once again and he will play for about 2 seconds then stops.  SPACEBAR for success once again and he will play for another 4 seconds then stops.

    In my view, it is based around my Bose Companion 5 USB speakers.  I passed the exit of Bose to built-in output and it plays well back.  It does not stop.  I need to know if I have the right settings.  I have attached the screenshots below.

    I deleted all caches media physically from the files by manually deleting files.  I spent CUDA to OpenCL.

    Mac Pro (early 2009 4.1)

    OSX El Capitan 10.11.1

    2.93 Ghz Quad-Core Intel Xeon

    16 GB OF RAM

    NVIDIA GeForce GTX 780 6144 MB

    CUDA driver version: 7.5.21

    Driver NVIDIA on the Web: 346.03.03f02

    Screen Shot 2015-12-01 at 7.57.22 PM.png

    Screen Shot 2015-12-01 at 8.00.27 PM.png

    Screen Shot 2015-12-01 at 8.14.02 PM.png

    Thanks for any input on this issue.

    Change your 'default' entry in the preferences audio of "Integrated Digital Input" to the Line In. Also, what is the sampling frequency of your sequence? Make sure it is the same as your sampling rate of material (in this case 48000 kHz).

  • Lyrical video fonts increase every few seconds

    I want my do (Object) to increase then return to the original size 3 times every 4 seconds in ADOBE AFTER EFFECTS. Help?

    Animate scale

  • Klondike Solitaire FREEZES on my RT Surface for a FEW SECONDS THEN REPREND AGAIN

    When I play Klondike Solitaire on my RT Surface, all a few minutes it will hesitate or freeze momentarily. When this happens, the screen become completely insensitive for usually one to several seconds, then resumed as if nothing had happened. If I had typed on the spot of deal - example (upper-left), three cards could pause to two cards, then back and deal with the third.  The taps on the screen during a freeze appear to be ignored.

    I tried to use the Task Manager to find the associated activity changes, but saw nothing obvious. I suspected possible interaction network of Xbox, but even with the RT in airplane mode (all networks off) made no difference.

    I don't see clear indications that other people have similar problems.

    Any suggestions?

    /kenw

    I never managed to get in touch with support game people - Microsoft seems to want to insist that I sign for Xbox - which I don't have and certainly have no interest.

    However, seems Klondike was last updated solves the problem, if it I assume that there is a bug someone he knew and fixed.  would have been nice if they had documented it...

    /kenw

  • When bootingup vista home basic screen becomes black for more than 120 seconds then restarts again, how it stop doing that?

    I know there have been many on this black screen problem, but I just cann't fix thisI have tried some fixes, but nothing seems to help. Also, my system is 32 bit. I tried my understanding of System Mechanic pro, tuneup utilities 2012, Soluto.It, there is a timer that can be set, but I don't have an idea how doing this and don't want to spoil things more they already are. Anyone got good ideas without danger?

    Hello

    • The computer boots to the desktop after showing black screen?
    • When the issue started?
    • Were there any changes made to your computer before this problem?

    Step 1: Start the computer in safe mode and disable your video card.

    a. start in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    b. sign in your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

    c. open the Device Manager: http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager

    d. in the list of categories of equipment, expand the category of display cards. Take note of your graphics card.

    e. right click on your graphics card and then click on disable. Confirmation prompt, click Yes.

    f. close all open windows and restart your computer normally.

    If you can see your desktop, then there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

  • audio or video stops and emits one every 30 seconds

    When I launch the video or audio every 30 seconds there is a slight hesitation and the buzz while playing. Does anyone in the community know this phenomenon? If so, how to solve it. It's on my laptop Dell Inspiron 1545.

    When I launch the video or audio every 30 seconds there is a slight hesitation and the buzz while playing. Does anyone in the community know this phenomenon? If so, how to solve it. It's on my laptop Dell Inspiron 1545.

    It happens with WMP only? Have you checked the same thing with another media player such as VLC Player?

  • I have a to Projection LCD Sony KDF-E55A20 TV. He will play for 30 seconds then the TV goes black with

    I have a Sony KDF - E55A20 LCD TV. He will play for 30 seconds then the TV goes black, and the projection lamp turns off, sound and image of loser. In addition to 30 seconds the TV will go back on, picture and sound, with the projection light will come back on. This process goes on and on, for 30 seconds, 30 seconds, and so on and so forth. Is my problem the lamp of projection or something making the projection lamp go out?  The lamp does blink.

    I also have a Sony KF-50WE610.  After that warm-up screen will be partially or entirely green, fuzzy television images, back to normal and then on and off the green. I replaced the projection lamp but the problem persists.

    Any ideas?

    Sounst like you have a lamp or a bad ballast Board... maybe the fuse thermal problem on the we610 a20, I had a... your optical block going bad... not much to do with a single, it is costly repairs for that old of a TV.

  • his bodyguard put mute every 5 seconds

    My computer sound keeps mting every 3 seconds.  I updated the driver and the problem persists. Help someone!

    Hi Sctk,

    1. This occurs when you use a specific application or all applications?

    2. did you of recent changes to the computer?

    Step 1:

    You can try to use the headset and check what is happening.

    Step 2:

    You can try disabling audio enhancements and see if it helps.

    For more information, you can consult the following article:

    How can I stop my music skip or break down when I play?

    Hope this information is useful.

  • Qomsio F60 - 10 K - fan runs at 90% for 20 seconds, then goes to 50%

    Hello, I bought laptop before about 11 months and today, I got an error :)

    My laptop fan working at 90% in Windows I have does not work any game quite normal in the Windows 7 Desktop, and fan is 90% about 20 seconds, then going to 50-60% and after 1 minute still on 90% and like this all the time.
    Where is the problem?

    Hello

    Eventually, the temperature increases to a level where the fan must be operating at 90%.
    Then, the temperature falls down due to faster air circulation and so the fan runs slower. Then the temperature rises again and this cause a stronger fan activity.

    Maybe the portable computers vents are clogged with dust or debris.
    I think you first need to clean the fan using a jet of compressed air and it should test again.

  • I need my Vi to save only one point of data every 30 seconds

    Hello

    I have trouble getting my VI to make only one point of data every 30 seconds. I collect a couple and the temperature. If you take a look at the queue of lvm, you will see that I have two data points every 30 seconds. I want only the VI to take one. I can do this by going to the DAQ assistant and change the mode of acquisition of N samples 1-sample (on request), but if I do this I am not able to see my couple of graph in real time.  In addition the VI takes data about every 30 seconds. Is there a way I can strengthen this also?

    1. change your graph of couple to be a graph.  A graph has a history associated with him, so he keeps old values in a circular buffer for you.  A chart shows just the last thing written in it.

    2. change your sample of Compression to be 64.  It is currently set at 30, which means that you will end up with 2 samples in your data.  That's why you write 2 samples when write you it.

  • Satellite M70-339: playing a video display freezes seconds every 10 seconds

    When I play a video/dvd, etc. display sticks / freezes for a split second every 10 seconds or more. This happens when I have something to play online or one of my own CD. It does on all software (Windows Media, Real Player, etc.).

    It seems to be a driver of anything, but I can't be sure.
    It is certainly very annoying!... and seems to be getting more noticeable. Would appreciate any help I can't find anything else on the web that explains why this happens.

    Thank you
    Jim

    You may need to update the graphics driver.

    But can I ask for more details?
    What cell phone do you have? What operating system do you use?

  • Video freezes every few seconds

    I just bought first elements 14. I bought a subscription to Lynda.com to get up to speed on the program. For several days, the apprenticeship program. So now I'm ready to start editing. I load three videos in the assets of the project. One is a long hours MP4 video which is 6 GB. My system has 8 GB of memory. When I open the video 6 gig in the mower, the video freezes after a few seconds. I tried to put it on the timeline, and it crashes after a few seconds. I tried to cut everything, but a minute or two of the video and it freezes. Then I reduced the resolution of the screen down to 1080. Always freezes. I cut the long video out completely and tried to edit a three minute video. It freezes every few seconds.

    So now I think there must be a problem of memory because of the long video. I left out of the program. Did not save the project. Has started a new project with the short three-minute video. Opened in the window of the mower and began to play the video. It freezes after a few seconds. I'm on Windows 10 64-bit with a processor I7 3.4 ghz. What Miss me?

    Could be the Organizer.

    Just double click in the project window active to import images.

  • videos start and stop every few seconds

    Why the videos load every few seconds?  I can't view a whole video without 4 or 5 second breaks every 4 or 5 seconds.

    Hello

    You can try resetting Internet Explorer as follows: be aware that this will remove bookmarks and saved passwords etc

    Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

    Once completed, open IE and click on the Adobe link yet to invite the reinstalling of the component ActiveX - once this is completed, reboot the laptop.

    Kind regards

    DP - K

    

  • Hum/buffering sound every few seconds when the streaming videos online.

    I can't stream videos online (IE youtube, vimeo, etc.).  Every few seconds the sound will sound buffer. The photo is very good all the time. I have updated all drivers, tried to change the 16-bit sound, 440000Hz, update flash, silverlight etc. I also tried several browsers such as IE, firefox and chrome.

    I found a solution that is far from ideal, but if I disable the Realtek High Definition Audio, restart the computer and then reactivates the Realtek High Definition Audio, the sound buffer disappears. Unfortunately the its buffer returns the next time I start the computer.

    Does anyone have a more permanent solution than the deactivation of the sound system - reboot and then reactivating og the sound system?

    Cordially Oyvinols

    Hi @oyvinols

    You can reset the BIOS with this document by selecting the reload the default BIOS settings. Helping other people.

    Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

    I hope this helps.

    Thank you.

Maybe you are looking for

  • A few questions about the Satellite A100 PSAANE

    Hi friends, I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.Now, I have a few questions... I mention below: -. (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this

  • Save the data of the 6000 USB without Labview

    Hi all. I'm sure that this questions is buried somewhere, so I apologize if I'm repeating a question that has already been asked and addressed. If this is a redundant question, simply pointing me back post relavent will help. I have a 6000 USB. I con

  • touch pad issue

    on my touch pad there are lines at the rt far as you slide your finger up a down they move the screen. is there a Wo sensitivity for this?

  • To open the files that were recovered in format DNT recovered

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: I tried to open them with Wordviewer and it was just randomly garblePrograms with what you have problems Error messages Recent changes to

  • LaserJet P20115dn will not duplex in windows 7

    I recently changed computers from Windows XP to Windows 7.  The installation for the p2015dn disc was only for Windows Vista and download the drivers. I could could not find drivers for PCL6 P2015 and only manual duplex options.  I REALLY need the du