Video/Audio renders for 4 seconds then stops

Similar Questions

• Only plays for 1 second, then stops.

  CS6 11.0.1 with a Quadro 4000 using. I have about 50 stills from my calendar that are about 1 second. When I press play (or space bar), the playhead moves for about 1 second, then stops. I press the space bar again and he will play for a second (or less)... then stop. I tried to turn rendering CUDA off the coast, but the same problem.

  I also tried to disable the video and just play the audio track. The same problem. I turned off both audio and video and I get the same problem just play black! Same thing if I play a clip in the editing window.  It is not a problem of secure keyboard (I can play the SPACEBAR in AE CS6 & Quicktime Player very well)

  I made my calendar (it is all green). Why can't I play a little bit at a time?

  Try this.

  http://helpx.Adobe.com/Premiere-Pro/KB/playback-stops-loops-Soundbooth-premiere.html

• Suddenly on for 10 seconds then stop

  I have a second hand report, saying that iPhone 5s suddenly turned on his own for 10 seconds only turns off.    This would happen when the phone reaches full charge and it has been recharged through the wall adapter?

  Shouldn't. Normally turned on when she sees, and she must be intentionally disabled after that the prosecution has started to load then at sea. I don't think even if being charged while it is something would do it turns on, but then I don't charge my device when it is turned off.

• Firefox runs exactly 15 seconds then stops. Why

  Just installed Firefox today. It runs for 15 seconds then stops. Have not been able to set preferences, visit websites, nothing at all.

  What operating system do you use?

• Video clips will play only for a second before stopping in Movie Maker

  I am experienced with Movie Maker, but now when I try to set up a series of video clips, the video only play for one second (literally) before coming to rest. I tried several video formats without success. I am currently on updates and have never had this problem before. WMV files are choppy and slow and sometimes stop, too.

  Hi NessaWest,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  I suggest that you disable audio and video filters in Windows movie maker and check if it helps.

  Video and audio filters are programs that are installed on your computer that help interpret video files so that they will display and play correctly. Windows Movie Maker uses when you import a video and audio, extract your project on the table of storyboard / timeline, and when you publish a movie.

  (a) open Windows movie maker

  (b) click on Toolsand then click Options.

  (c) click on the compatibility tab.

  (d) do one of the following:

  ·        To turn off a filter, clear the check box next to the name of the video filter.

  ·        To activate a filter, select the check box next to the name of the video filter.

  ·        To restore the default list, click restore all defaults.

  When you restore the default settings, the list and the filters settings are given to the last known good setting.

  Video filters in Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reading problem, when I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB

  When I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB, im using adobe production premium cs6

  Here is my card in my machine.

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Name of the processor: Dual-Core Intel Xeon

  Processor speed: of 2.66 GHz

  Number of processors: 2

  Total number of Cores: 4

  L2 cache (per CPU): 4 MB

  Memory: 8 GB

  Bus speed: 1.33 GHz

  It is found on all projects, I'm still under snow leopard, I have a NVIDIA GeForce 7300 GT graphics card, and yes the playhead stops after a second reading of a video in the source and program window.

  After hours of research and troubleshooting, I managed to solve the problem by signing on the standard user and account logging in as an administrator. Somewhere in the standard user account prevents play video.

  I'll recreate a different standard user account and see if that fixes the problem.

  Thanks for your response

• Hi, I would like to add an image in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  I would like to add a photo in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  Just add your photo on a higher video track, it will cover up to a below. You can use the effects of movement to move and scale the image.

  

• DVD stopped working got external dvd but no not disks work runs for a few seconds then stops

  has had to put the new hard drive in the computer. When I got back that DVD has worked for a while then stopped. Downloaded the software and drivers to try to fix the problem, but no luck. I tried an external but computer dvd for some reason any will not recognize the unit. I also have a legacy of clickfree backup, but now that my dvd works not the clickfree will not work. I have also reinstalled the dvd but that did not work. any ideas?

  Hello

  ·         What operating system do you use?

  Follow these methods and check if that helps.

  Method 1:

  Run this Microsoft fixit t tool and check if it helps.

   

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• Windows Media Player audio fault. - parts don't sound for 30 seconds then no sound

  My Windows Media Player does not play sound for 30 seconds, then there is no sound. No matter where you start the movie is always 30 seconds and then silence.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  It will be useful.

• After that switch on my PC works for a minute then stops, this happens 3 times then starts with the last good Configuration

  It started only four days ago, I spend on the PC runs for a minute then stops. This can happen in 3 or 4 times. can Ichoose last good known Configuration and running a CHKDSK and usually begins.

  Hello

  1. Since when are you facing this problem?
  2. Did you make any recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  If the computer works fine in safe mode, then I suggest you perform the check and clean boot if this can help:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  For more information, see this link:
  http://support.Microsoft.com/kb/320299

  It will be useful.

• Whenever I try to open other pages, they'll just be "loading" for 30 seconds then it says that the page cannot load (as if my internet is disconnected)

  Recent internet connection problems

  Recently, my internet has been acting weird. He has never acted like this before, until 2 people moved my basement and began to share Internet (maybe a coincidence, but not sure). Sometimes when I leave my computer on and stay away from the keyboard and go back some time after and open my internet browser, only my home page would be in charge. Whenever I try to open other pages, they will simply be "loading" for 30 seconds then says that the page cannot load (as if my internet is disconnected). But the problem is, when I click on network and sharing Center, there is nothing wrong with that.

  Access - LAN and the Internet

  Connection - connection to the Local network

  It's the same when my Internet works fine, but I can't just browse other Web pages EXCEPT the home page that appears when I first open my browser. When this happens, I usually unplug my modem then reconnect OR just keep trying to load a page when after like 5 minutes or more, everything works normally.

  How can I solve this problem? It is annoying and happens almost everytime I go back to use my computer after staying idle for some time.

  By the way, I noticed that I have 4 'networks '. I'm not sure what they are, but I could merge or delete them. It would help my situation?

  Control Panel-> network and interest-> network and sharing Center Center-> customize-> Merge or Delete network locations.

  I am very annoyed by the present and I would be grateful any entry in this case.

  Thank you in advance.

  Hello

  Follow the steps in this links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Using large icons, I can't see a picture. The picture flashes for a second then appears the default icon (a lake and mountain)

  original title: Windows Explorer

  Windows Explorer.  Using large icons, I can't see a picture.   The picture flashes for a second then appears the default icon (a lake and mountain). I can only view a photo in the photo library.  This just started happening.  What has gone wrong?

  Miniatures,

  Open your my pictures location, click on organize in the upper left corner, click folder and search options, click the view tab and uncheck the top option, always display icons and never thumbnails, select apply and save.

  Return to your location of my pictures, change the display of the page on the top of the right side next to the question mark symbol, there is another symbol with a menu drop-down symbol, click it and select the medium or large icons options specified.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• I have a to Projection LCD Sony KDF-E55A20 TV. He will play for 30 seconds then the TV goes black with

  I have a Sony KDF - E55A20 LCD TV. He will play for 30 seconds then the TV goes black, and the projection lamp turns off, sound and image of loser. In addition to 30 seconds the TV will go back on, picture and sound, with the projection light will come back on. This process goes on and on, for 30 seconds, 30 seconds, and so on and so forth. Is my problem the lamp of projection or something making the projection lamp go out?  The lamp does blink.

  I also have a Sony KF-50WE610.  After that warm-up screen will be partially or entirely green, fuzzy television images, back to normal and then on and off the green. I replaced the projection lamp but the problem persists.

  Any ideas?

  Sounst like you have a lamp or a bad ballast Board... maybe the fuse thermal problem on the we610 a20, I had a... your optical block going bad... not much to do with a single, it is costly repairs for that old of a TV.

• Help! Object enter the scene, stop for a second, then go. How?

  Hello world

  I am a beginner in AE and I'm trying to animate a bus I made using illustrator. This bus is suppose to enter the scene, stop in the middle of it, than to start over and leave, simulating a bus stop.

  Now, I realized to get into the scene and get to the point where I want, but how can I do stay there for a second or two and then start again, because if I add a keyframe after a second it does not block and it continue. I'll add a screenshot of my calendar to show you!

  

  The first key frame is where the departure of the bus, and the second is where he suppose to stop and where my red line is I want to do it over again, so the time between the second keyframe and the red line is where I want the bus stop!

  Thank you

  Use a hold keyframe.

  Using After Effects | Interpolation keyframes

  Start here learn After Effects:

  http://Adobe.LY/AE_basics