playReverse problems of delay?

Similar Questions

• Problem of delay time PXI-5105

  Hello

  I'm running the PXI-5105 (@ 60Msa/s/ch 12 bit 8Ch) using the attached VI. I put it to trigger off channel 0 to 1V.  When I put in a sinusoidal waveform of cycle 5, it seems that the scope triggers too late and I only see 4 of 5 cycles.  I confirmed this by generating a sinisoid of increasing amplitude across a PXI-5412 and again once the waveform has been truncated, as if there is a delay after that relaxation hit.  (btw, I have an oscilloscope running in parallel and the waveforms appear perfectly here)

  Why this is happening any help would be really appreciated.

  Thank you!

  Actually - problem solved.

  When I played with him I had inadvertently set it to DC coupling.  Coupling AC fixed.

• Problem with delay

  I have a code:

  gameScreen_mc.coinToss_btn.addEventListener(MouseEvent.CLICK, delayCheckAnswer);
                 
                 points = 500;
                 
                 gameScreen_mc.earn100.visible = false;
                 gameScreen_mc.earn200.visible = false;
                 gameScreen_mc.earn300.visible = false;
                 gameScreen_mc.earn400.visible = false;
                 gameScreen_mc.earn500.visible = true;
                 gameScreen_mc.earn600.visible = false;
                 gameScreen_mc.earn700.visible = false;
                 gameScreen_mc.earn800.visible = false;
                 gameScreen_mc.earn900.visible = false;
                 gameScreen_mc.earn1000.visible = false;
            }
            
            public function delayCheckAnswer():void
            {
                 trace("delay going.....wait 2 sec");
                 setTimeout(checkAnswer, 2000);
            }
            
            function checkAnswer(event:MouseEvent):void 
            {
  

  After clicking to coinToss_btn I want to wait 2 seconds, and access the checkAnswer function

  but I see this error:

  ArgumentError: Error #1063: inconsistency of Argument on CoinToss County / delayCheckAnswer (). expected 0, got 1.

  Why his hepend and how I can fix this problem?

  Thank you.

  Hello

  You need to do that: -.

  public function delayCheckAnswer (event: MouseEvent):void
  {
  trace ("timer... wait 2 seconds");
  setTimeout (checkAnswer, 2000);
  }
           
  function checkAnswer(event:MouseEvent):void
  {
  }

  It will work for you.

• problem of delay FPGA can understand

  Hello I have labview pci virtex 2 card in the computer and try to implement DMA from the host to the fpga (I use a clock of 200 mhz, which is the first of 40 MHZ with pll multiplier)

  but every time I have an error of period not comply with the requirements of compilation happens that I can't understand how to fix it

  I tried changed settings tick and insert the delay loop, but does not change the error

  I have attached the results of error timming

  can I get help on hw to solve?

  Ghattas.Akkad wrote:

  If a fast clock should not be better then a slower?

  What do you mean by "better"? Faster, the clock, less you can do in a clock cycle. Your code uses a single-cycle timed loop, which means that the entire interior of the loop must run within a single clock cycle, and there is also a lot of logic in it to run at 200 Mhz. A fast clock is not better than a slowdown, if it is not possible for the code to run at the faster clock speed. Why did you choose 200 Mhz?

  It is also unnecessary for the structure of the sequence, even if this is not bad no matter what.

• Problems with delays of parental control and activity reports in Windows 8 PC

  The family safety team has identified two problems for people using parental controls in Windows 8:

  ·         Time stop working

  or

  ·         Parents receive reports of activities that have no PC activity, even if children are using the PC. (Use and web application use is still reported, but the chart for PC time used is empty.)

  I had the same problem (s).

  Finally fixed it.

  The child user account must have the PC 'trust' in relation to the windows live account online restored. Connect you to the computer with the user account does not. By scanning or the mouse, click on the right side.

  'Settings', "Change PC settings" "sync settings" "passwords" "trust this PC.

  You will need to have a code sent to your mobile phone or the phone at home or email.

  Once the code is entered and verified, the PC is now in 'Trusted PC (s)' account online windows live.

  This must be done on each user and each PC that does not work.

  Good luck, hope this helps other parents. I was pulling my hair out with this not working do not. Time limits is the best thing in the WORLD, as long as it works!

  Sorry kids, no more free time on my watch!

• A problem with delays in call loops and DAQ

  I'm programming a simulation for nuclear Rewetting for a reception centre to my company in Switzerland. It is a "fuel rods" heating and then fill the water Chamber. The pump starts automatically as soon as the core of the stem reached 750 C. After that, a requirement that the flow rate be checked to ensure the operation of the pump in the necessary conditions. If not, the heating must be stopped to avoid, well... meltdown. However, we must allow 10 seconds for the pump to respond, while allowing a rate of acquisition of data from 10 to 100 Hz.

  The challenge is that I can not add a delay in my other main loop delay all acquisitions, but I can't understand how to trigger a device loop (with data acquisition for the single channel flow control) and the main loop when the loop device determines if the flow a initalised, answering the main loop with the agreement.

  I think that a large part of my confusion is in the interaction between loops and knots of default comments labview's willy nilly. The only solution would be to have two 'core' loops that do not communicate with them, but rather to do the same thing while operating different synchronization? Tell me if you want I will post the file (even if its on a unnetworked computer and I don't think that it would also be useful).

  Thank you + Curran

  Here is a version 9.0.

• Problems of delays and of connection after update 5.1 (2)

  AIM/chat and other programs are timeout/connection problems after upgrading to 5.1 (2). I also use S241. Connection problems stopped when the IPS has been set to avoidance. IPS rebuilt and left to default sigs and the problem still occurs. I don't see any IP addresses that have the problem in the observer of events or the events of IDM.

  Of the known problems with the 5.1 (2) which would cause this type of problem?

  I do not particularly, but I noticed that 5.1 (3) was released today.

• Personal media player problem - Windows delayed write failed

  I have a 1 TB Personal Media Drive (hd10000x) which does not with my e9120f machine Pavilion Elite running Windows 7.  When I try to write to the disk using the dedicated Bay or USB connection, he wrote a small number of files (anywhere from 8-100), then an error "the system cannot find the specified file.  In Event Viewer-Windows Logs------system I get thousands of warnings "an error was detected on device \Device\Harddisk6\DR6" and "the system does not have empty data in the transaction log.»  Corruption may occur.

  This is my second personal media player, I had the same problem with the first, and he returned after spending 90 minutes online with the help of HP trying to diagnose the problem (with a friendly assistance technician yet not very knowledgable).  Its best estimate was Norton AntiVirus, but the drive did not work when the machine has been started in Mode safe and AntiVirus software has not loaded.

  The drive works fine with my old Dell laptop Windows XP, but not with my brand new HP desktop computer.  I think that it must be a driver conflict but can't find anything in the forums or elsewhere online.

  Ideas anyone?

  .

  Who seems to have done the trick - thanks

• Main problems of delay (2009). Help!

  Hey guys, for the last two days that I tried to get my MacBook run smoothly at the end of 2009! After so many forums El Capitan watching seemed to be the answer! Well, I tried that and now my computer is not the completion of download. Perhaps, it stops at 4%. I went to sleep and woke up it was still there! I can't create a new folder under macHD to move files .kext or else! I am getting really irritated and I really don't want to trash the old Mac book but I'm starting to feel as if it was the only way. BTW under Mac Os X (10.7)

  (1) you get a faster response and more focused if you do not validate on an Intel Mac on the forum for PPC computers over nearly a decade.  I would ask the post be moved.

  (2) launching a new operating system on a computer with questions is just asking for more trouble and more complex analysis because of additional software.

  (3) I don't think you should do something with .kext files unless you really know what you're doing.

  (4) execute this Analyzer and post the results here.

  http://www.etresoft.com/etrecheck

  With the help of Etrecheck - https://discussions.apple.com/docs/DOC-6174

• Computer stuck on 'test mode' and is having problems of delay serious is not allowing me to repair my registry or even access.

  I have Windows vista home edition 32 bit and all of a sudden its stuck on 'test mode' and it only allows me to access my regristry editor or anything to do with regristry. If I am near him, it simply restarts the computer. This whole test mode is seriously lagging my computer, the CPU is really bad spiking constantly. Is there anyway that I can fix this? When it starts, I have to manually perform a new task to even run windows Explorer. as the bar of tasks and themes and other. So if there is anything that I can do, let me know. Thank you.

  I don't know how you could have accidentally in Test Mode, but here's how you are supposed to activate or deactivate the Test Mode: http://msdn.microsoft.com/en-us/library/ff553484(v=VS.85).aspx

  There is some experience about it in this article:

  http://blogs.msdn.com/b/ntdebugging/archive/2011/08/05/for-testing-purposes-only-and-other-desktop-watermarks.aspx

  It could be that it is a particularly nasty brand of malware. I have not heard of something like this before and do not know how you could go about fixing this short of reinstalling Windows. Even if it is maybe not enough if startup records were damaged. I hope someone else can help.

• I have a Windows 7 home version and I have problems of delay in the opening of my PDF files with acrobat reader XI software.

  I get a failure to load the dll base and he can not open due to incompatibility of the system and asks me if I want to open in unprotected mode. I would like to than my old version back. But I don't know how or remember what version I had. Help?

  Uninstall Adobe Reader and then download it [see the right-hand side of the Web page] & reinstall it.

• iOS 10 zoom causing the shift & blocking problem

  Hello

  I have several devices running iOS 10 ranging from a 5 iPad iPhone mini 4, to iPhone and iPad Air 2.  I noticed that when the zoom toggle in the settings is enabled (whether zoomed or not), I feel an enormous amount of lag, tactile and inaccurate affecting blocking problem.  No matter if I am completely zoom in or zoom out (double-tap with 3 fingers), a simple navigation creates all sorts of problems for me.  I will describe a few questions I meet below. ;

  (1) contact command will be sometimes not.  Even simple measures such as scrolling through the different pages on the homescreen to pinch to zoom in the image and Safari have problems

  (2) when zoomed in, many times, my button are inaccurate.  For example, a major problem that I have is that in the mail application.  If I drag to the left to remove an e-mail, I get sporadic movements.  In most cases, I have to slide slightly to the right of the line to do a full sweep.  In other cases, sometimes touching a button like 'OK' or by pressing another button would not register.  I may support slightly above, below, or around her to enroll.  It is extremely annoying.  In particular, I have this problem with my iPad 2 Air.  I'm leaning towards it being a defective scanner.

  Please note that when the zoom toggle is set to off in the settings app, I have no problem with delay or lack of response.

  Anyone else have this same problem?

  I'm having this same issue. Both on my iPhone and my iPad. The two running iOS 10 for now. The problem is not related to iOS 10 in my opinion, because I had this problem for awhile now.

  Affecting the zoom toggle OFF makes the question to go far, but of course that's not the solution. There is a reason why I need this feature to zoom. Deactivation of the zoom feature makes it very difficult for me to use my iPhone and iPad in some circumstances. So, I find myself constantly switch the zoom feature and LEFT. Very annoying. I hope that we will have a fix for it any time soon.

• How to remove the random delay to the extent

  Hi guys

  I had a little problem with a measure that I do in a subvi. Take a look at the picture (do not laugh please )

  

  Some first explanations:

  I put online a digital high in order to initialize a piece of hardware.

  Can I activate two relays. Time zero (T0).

  Then I have to activate the piece of hardware that I've initialized at startup.

  In the meantime enabled I do measure (here called Maling). The measure is 40 channels. I do measure on 10 circuits. Each of the 3 voltages and current measurement 1. Tensions are CSR and the current is differential. Sampling is 1000 samples at 1 kHz, which gives me a resolution of 1 sample every ms.

  After the measurement, I turn off the relay and the piece of hardware that I've initialized at startup.

  The collected data is transformed into an array of 40 lines and columns of 1000 with the data. In my loop for I extracted the data and make a comparison and put the data in a chart.

  Here's my problem:

  I get a random delay on each measure. I used to get the tickcount OpenG (could use framing). In the x - y indicator, I get 1060-1072 - ish milliseconds. I tried to subtract the 1000 ms of measure and delay of 60-72-ish "millisecond" added to my chart and dataindicators, but it does not work. When I use oscilloscope on 10 channels, I get the same measurement each time. When I do in Labview, it becomes worng because of the delay. I get exactly the same extent as the oscilloscope.

  In my own defense:

  I used the DAQ Assistant, because it gives me the wiring diagram of the material on my series M of NI USB-6225. Also I am not yet familiar with the implementation of the data acquisition without help. Yes, I looked at the forum and the examplefinder, but I spend too much time on this compared to help data acquisition.

  My measure should start just after the relay was activated. I think maybe using trigger on a clock internal, but not quite sure if it will help on the delay. My thoughts of setting this up would not use the DAQ help. Set up channels by using a loop For and do the measurement.

  You can maybe share some thoughts around the problem of delay and perhaps give me a clue on where to begin to remove this time limit. My DAQ should be ok because he has a limit of 250 k samples/s and I use it only 40 k samples. Do you think that the delay that I measure either before or after the measurement of 1000 ms?

  Kind regards

  Even

  My first reaction is that you are activating the fuses in parallel with your time of measurement and measurement on both. Move your clock of departure according to plunger PA and only to measure the time of Maling for beginners.

  (RelePWR-> Fuze Center-> time-> Maling-> time)

  /Y

  (next to welcome)

• NEITHER 9215 delay in phase between two channels

  Hello
  I use Ni9215 with ENET-9163 to measure the phase between two sinusoidal incremental signals delay. First signal connected to AI0 and, secondly, to AI4 at 100 k sample rate. I know 9215 simultaneous ADC, but it seems to me that NI 9215 gives additional time between the channels. Is it possible, or l mistaken?

  Alexandr.

  Hi Alexander,.

  Please let us know how you get on,

  Chris is correct - with the idea of using a right signal to both channels, I tried to suggest this earlier...

  I hope this helps with your problems with delays,

• HOWTO fix Labview 2010 delays

  My Labview 2010 causing huge delays ~ 30-40 years compiling and when using the restore function.

  It blocks the (useless) pc for its time.

  I tried several times now, but the work of development with this break is not possible.

  System: MS XP32, Athlon 64 3800 + with 2 GB of RAM is not recent, but clearly within the min. requirements: Pentium 4 and 1 GB

  The app is first written as LV 6.4/8.0 and use very less stuff express vi.

  HOWTO solve the problems of delay with LV coming 2010?

  1. do I need to rewrite my whole program express screws...

  2. can I disable certain features to reach LV 8.0 performance...

  3 do I need a faster cpu and more RAM...

  ((4 can I I restore this program to OR because of) a lack of compatibility and b) minimum requirements of evil

  BTW... can Labview be completely uninstalled at all...?

  Sorry to ask a little aggressive but this "program OR" cost me a couple of days now for nothing

  Tips in particular to Question 2 would be much appreciated...

  read it twice, I discovered a very interesting aspect now your answer Putnam... Thank you

  I think this indicates that the solution...

  sound in this line here...

  > Currently using LV 6.1 - LabVIEW 2009, RT8.5

  I'll go and reinstall 8.0 and available banks of LV and recommend seriously

  for all LV users do not update to LV 2010.