PLEASE HELP ASAP! .. .i lost my cereal number!

Similar Questions

• How to play that button set chapters? Please help ASAP!

  How to play that button set chapters? Please help ASAP! I try to create 6 chapters of two videos, but I don't know how to set all play too. If I put a playlist with chapters 1 to 6 of the room all the button plays not all but only up to Chapter 2 and after the jump to finish and stop! What I've done wrong?

  If I put a playlist with chapters 1 to 6 of the room all the button plays not all but only up to Chapter 2 and after the jump to finish and stop! What I've done wrong?

  You have an end action or a substitution on any of the chapters.

• First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

  First and After Effects are absent from the Cloud Adobe Application Manager... Please help ASAP

  Short and accurate: if they don't appear, your system does not support them. Refer to the plug Tech on the product pages and make your choice...

  Mylenium

• Satellite P10 554 will not start! Please help ASAP!

  Hello, please someone help as soon as possible.

  I got it for a few years now. A keyboard replaced Germnan to English.

  Used it three days ago and was very good. It shows no signs of something not ussual.

  This mornign however, I pressed the "power" button and not started. I tried to connect the battery, no indicator light came.

  I'm lost-don't know what to do.

  Please help someone?

  Thanks in advance

  Hello Morta

  If the unit is connected to the power supply and if there is no response after pressing power button must be some hardware malfunction. Press the power button and hold down for a few seconds. I put t know how old is your device but it is possible that the warranty is still valid. Please contact the customer Service of your country partner and let check the device. The warranty will cover the costs.

• Please help - all is lost on my profile

  my computer crashed this morning by searching on google.

  When it has been restarted, he loaded a new profile, indicating that "your user profile was not loaded correctly, you have been logged on with temporary t profile, all profile information will be lost.

  I'm interested to know, if my old user profile is gone for good, or if there are ways to find again? It is on this profile, I've kept all the emails, photos etc etc... and if they are lost, I'll certainly scream!

  Please help someone! ?? I'm desperate!

  Hello

  Your data should stay there and accessible from your account once it is restored, or any
  ADMIN account. It will be under the old username C:\Users\"Your"------where C: is the drive.
  where your profiles are stored.

  Read and use this 1:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  -----------------------------------------------

  If you have other questions, try these methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Please help: instruction box - ORA-01722: invalid number error

  Hi all
  I am trying to use the Case statement to recode the status canceled in two groups
  "Reject" If the difference between the date of the first and the last date is less than 29 and
  'Accept' if the difference between the date of the first and the last date is greater than 30
  
  Here's my data 'test'
  
  STATUS FIRST_DATE LAST_DATE
  
  Transfer / / 10/08/2011-10/09/2011
  Mover 10/08/2011-15/09/2011
  Cancel the 16/09/2011 10/08/2011
  Cancel the 10/08/2011 5/09/2011
  
  Here's the syntax
  
  Select a.*,
  (CASE WHEN a.STATUS = 'Cancel' CAN (round(a.LAST_DATE-a.FIRST_DATE))
  0 OTHERWISE
  END CAN_DAYS),
  (BOX WHEN "CAN_DAYS" > 29 THEN "reject"
  WHEN "CAN_DAYS" < 30 THEN "accept."
  Reject_Accept END)
  try one
  
  The first CASE statement works very well and gives me this
  STATUS FIRST_DATE LAST_DATE CAN_DAYS
  
  Transfer 0 10/08/2011-10/09/2011
  Mover 0 10/08/2011-15/09/2011
  Cancel the 37 16/09/2011 10/08/2011
  Cancel the 26/10/08/2011 5/09/2011
  
  but the LATTER product ORA-01722: invalid number error. It's something to do with the type of data CAN_DAYS, Oracle does not see in the Numeric form I think.
  I want to see result
  STATUS FIRST_DATE LAST_DATE CAN_DAYS Reject_Accept
  
  Transfer 0 10/08/2011-10/09/2011
  Mover 0 10/08/2011-15/09/2011
  Accept to cancel 37 10/08/2011-16/09/2011
  Refuse to cancel the 26/10/08/2011 5/09/2011
  
  Could someone please help me fix the syntax?
  Thank you in advance,

  Hello

  The error is due to the fact that you are trying to compare "CAN_DAYS", which cannot be regarded as a number, a number.
  You can try this option for your results:

  select A.STATUS, A.FIRST_DATE, A.LAST_DATE,case
                                              when a.status ='Cancel' then round(a.last_date - a.first_date)
                                              else 0
                                              end as can_days,
                                              case
                                              when (a.status ='Cancel'  and round(a.last_date - a.first_date) > 29) then 'Reject'
                                              when (a.status ='Cancel'  and round(a.last_date - a.first_date)< 30) then 'Accept'
                                              else null
                                              end as Accept_Reject
  from test a 
  

• When to change a start page preferably, a dialog box pops up and won't go away, even after clicked and restart FF. Please help ASAP

  This dialog box indicates "an attempt to change your home page and default search has been blocked" & "click to change these settings. After clicking on the "close button {X}", won't let the box of my screen, where it blocks ANY activity. Which means that, not only the dialog box covers aloud to the left of my screen (on my Mac, blocking access to all of the choices of window button).

  Literally blocks the activity of the screen all THE more of a 3 "-4" AUTOUR / greater than the size of real dialog box. " Move windows just so I can access the window buttons, although clear of ' under / covered by "dialog, the buttons still do not accept that is clicked, to inch away from the box. Even if it seems to be completely cleared and outside the box.

  When I go to another application, like the finder or to a full-screen video game, your still dialog box, any blockage 'slot' and 'around '. It will not disappear, even after that I went to my preferences and original re - has chosen settings of no.

  PLEASE HELP AS SOON AS POSSIBLE BECAUSE IT IS VERY ANNOYING SCREWING WITH MY WORKFLOW - SEE PHOTO! Unfortunately, your browser will not upload a screenshot of 49K of this anomaly.

  Moreover, to load the image, you can meet your own message and attach the image to the response. Please change or blur sensitive information in the file before uploading the image.

• HP paviilion 15 laptop: screen brightness please help ASAP

  Hi guys, my display brightness is not adapt a day ago not used for theres no etc system restore and when I press f2 or f3 theres no increase or decrease it please help im really in urgent need all my software are average date until

  Hi @DylanL,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15 HP Pavilion Notebook and brightness does not properly. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options.
  Select balance, then click on change plan settings. Click on change advanced power settings. Then save changes. Sometimes just changing and selecting apply it and change it back solves this problem.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 8.  Please restart the laptop twice to make sure that all updates are completed!

  You can also try:

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  Please let me know how it goes.

  Thank you.

• Problem with the command net user. Please help ASAP!

  What is happening on Windows XPI logged on as administrator on my computer, then in the command prompt, I typed: net user administrator active: / Yes (and pressed enter). After that I restarted the computer, I can not connect, and was my password (password). Please help me as soon as POSSIBLE. Thank you!

  Your syntax is incorrect for the command "net user".  You probably wanted to enter the command:

  NET user administrator / Active: Yes

  The syntax of the command 'net user' (according to this article) is:
      net user [Username [password |]] *] [options]] [/domain/domain]

  All options begin with a forward slash character (/)

  By omitting the character "/" before "active:", you have probably changed the password of user 'Administrator' in "active:" or "active: / Yes" depending on whether you entered a space before the 'yes '.  Try to connect as an administrator when you enter that as your administrator password.

  HTH,
  JW

• Please help ASAP

  Please help me!
  Today I was watching a movie on my computer then suddenly the sound stops after I made some adjustments in the reading part to make it work on the helmet and not on the speakers and now when I go on the game it says reading: no audio device is installed
  And now on the sound icon right on the bottom of the page, there is a red 'X' circled on it, and when I pass the mouth above him, he said: no audio output is installed!
  I tried everything and it didn't work... I really feel someones help as soon as possible... I don't have the CD to install the sound, and I don't know how to install it...
  Help, please! This problem is KILLING me!

  Thank you!

  Hello Sandriine,

  Thank you for your message.  If it pleases you, try the following steps and let me know what you see or if this corrects the problem.

  1. right click on the speaker icon in the taskbar next to the time > select "playback devices".
  2. think you that the devices listed in the center of the window? If not,
  Right-click in the empty space and click on "Show disabled devices" > so if you see your speakers you can click right > activate

  We can't wait to hear back on your part.

  See you soon

• BBM EXTREEMLY URGENT - please help ASAP

  Hi, please help. This isn't a matter of life or death... but close enough. I have a Samsung Galaxy S4 and tried to e-mail 1 large cats bbm history for me and my bbm crashed. Now, I don't see no bbm conversations. I don't see my contacts, but not cats. I rebooted my phone and it asked me for my password. I forgot, so I reset my password. However, I still have the same PIN bbm and bbid. Only a new password. How to get a cat bbm? My service provider can help you, or is my missing bbm cat ever? Thanks, much appreciated.

  To make sure that I understand it looks after BBM crashed, everything works again, but your previous conversations in BBM surveys are missing? If so there is no way to restore those individual BBM chat unfortunately.

• I don't know anything. PLEASE HELP ASAP!

  I tried all day on a site I've used for years and until about 03:00.

  'S called it rcampus.com.  A screenshot is below.  Twitter.com I sent tweets on the site but I have no answer.

  I am a teacher.  I submit the notes record performance in less than 12 hours and my English students for an assignment notes are on this site.

  PLEASE HELP ME.  I have NO technical knowledge.  It is the only link on the site and I pray that someone here knows what to do.

  I need grades to a minimum and ideally a copy of the topic, I used for the calculation of these grades.

  The class is called English University.  The class code is ENG4U

  My login information for the site is msstarkman and my password michael1

  This is one of the links to my story.  I think it's the topic for a student: https://www.rcampus.com/rubricgradeeditf.cfm?c=%26%2D%5B%274R%2D%3B%2D%0A & r = % 26% 2 %5% 23% 27% 28 %%5D CQ 3 B-d % 0 a g = 25% 2D % 3BC2S % 3D % 24% 20% 0% & f = Sgr_Calc_Score_38724 & sidebar = true & OnSuccessPost = promptclose & OnSuccessRefreshParent = No. & nocache = 1359858954375

  Here is another link to my story.  I think that this applies to the ranking of the class where I save the grades: https://www.rcampus.com/gradeeditc.cfm?Cls_Id=111736 & Gdb_Id = & r = 109843 & nocache = 135985894468 7

  Here is the screen shot of the home page.  Thank you!
  

  

  
  

  I tried to access your site, https://www.rcampus.com , and it seems to be functional. Are you still facing problems with your site.

  Note: If ' Please do not share confidential information such as user name, password on the forums.

• Please help, somehow I lost my main composition layer window to preview

  Hi, this is probably the easiest problem to solve, but I didn't chance after several hours. Situation: I have a Setup dual monitor and I was working on AE with my preview window for my main composition on my secondary monitor. I closed the program and reassigned my priority of monitor (switched primary monitors). But, when I open AE I noticed that the preview of main composition window had disappeared and I can't locate.  I tried reassigning a new layer in the composition window, but when all the layers open composition, it won't let me see the preview of the full model, only previews of individual layer.  Please help, I have deadline and it is a problem. Thank you.

  Windows 7

  CS6 AE

  Two monitors from Viewsonic 24 "

  Radeon HD 5770 1 GB graphics card

  16 GB OF RAM

  AMD Phenom II x 6 processor

  Simply reset your work area by going to window > workspace > reset the workspace Standard

• Please help asap custom the grid fill is displayed

  I created a custom grid spacing value 2, gray fill. No matter HOW I export it, it shows just like a gray fill. Please help me I have it out as soon as possible it makes me crazy!

  Ccasati wrote:

  > I've created a custom grid spacing value 2, gray fill. No matter HOW I
  > export, it shows just like a gray fill. Please help I have this out
  > as soon as possible it makes me crazy!

  Custom fillings are Postscript code. They will not print to the non-Postscript
  printers. If you do not have a Postscript printer, you can export to a
  PostScript file or EPS file and use Acrobat Pro/Distiller to create a PDF file.

  If you speak of the grid to view > grid, then it's a nonprinting grid
  similar to the guides. Its purpose is to help the layout.

  If you want to create a custom grid that allows to print on all printers and
  correctly export to many formats, use a Fill in mosaic.

  Judy Arndt

• Please help, convert this string to a number format

  I send orders via RS232 to my machine and the machine sent back with a display of the number "40" in display normal in my image attatched. I tried to use the string conversion to digital tools, but there is nothing happen just '0 '.

  I wondered with it, then I try output string in a different way as in attached code, display and hex display and see the format of it.

  I want to get the string '40' to take the number, how can I get it? Help, please

  

  Thank you in advance.

  It has worked well for me. Just to be on the safe side, you can use the Trim function spaces (channels palette) to clear the characters "\".

  

  Steve