Please help me again for the touch screen

Similar Questions

• HP Envy M6-K022dx: can not find the driver for the touch screen

  My hard drive crashed and I reinstalled Win 8.1 on a new hard drive. I downloaded the drivers and everything works except the touch screen. No response when I touch it. There is no driver touch screen under HP support. A ran Supprt tune and it does not show the touch screen drivers. Tactile, used to work, and Yes, this model has the TouchSmart/digitizer touch screen. How can I get the touch screen works again?

  Hello @Sparky855,

  Thanks for the quick response!

  Looks like you need to install Windows 8, with all the drivers of origin supplied with the product.  Try first to review this document, to see if you can restore the drivers of Recovery Manager: Computers HP - use of the Recovery Manager to restore software & drivers (Windows 8)

  If this isn't the case, then you may need the recovery of Windows 8 media.  Here you can find media recovery for Windows 8: recovery - TouchSmart from HP ENVY m6-k022dx support Sleekbook media

  Try using the recovery media, install Windows 8 with all the original drivers.  Therefore, you can upgrade back to 8.1 for Windows.  Make sure to save your Windows 8.1 image just in case.  You can use the following documents to help you, if necessary:

  HP computers - create a recovery Image on disc or save a recovery Image on a USB drive (Windows 8)

  HP computers - create and use a Microsoft recovery USB drive (Windows 8)

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• monitor 23tm: where can I buy a usb cable for the touch screen of hp 23tm?

  This USB cable allows to use the touch screen functions. Anyone know where I can buy a replacement?

  @oneextremehiker, welcome to the forum.

  You should do HP Partsurfer one test to see that HP is available.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• design for the touch screen only

  Is it possible to design and apply a suitable for touch-screen devices bb 10? I don't want to create my application for non - touch screen devices is possible or would he rejected for the restoration doesn't not for resolution of 720 x 720?

  You can certainly, if you're just a question in general.

  If you also want to get the certification built for BlackBerry, however, you at some point will have to update the application to add support for screen 720 x 720 and possibly other unique features for phones with keyboard. (At least, if the application is not one that would be useless on the small screen for a reason any.)

  Details on when that might be is not yet known. I think that the terms and Conditions of the BFB program talk about how long you will need to submit the update, etc, if that's what you're talking about.

• Help with the touch screen!

  Hello, I hope someone could help me.  I just installed Windows 8 Professional on my TouchSmart 520-1070, and now the touchscreen does not work. I tried updating the driver, but that didn't work. I'm not computer savvy, but it does not work?

  How can I solve this problem? If anyone from HP is there, please help! Heck, if someone knows the answer, please help!

  OK... no one answered, but I guess it's ok because I've solved the problem.  You must make the updates for the office and add the extras. It is the Extras where the updated driver is for the touch screen.

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• How to make the touch screen work on W * 8? I have a Toshiba 64 bit PC only 3 years.

  How can I get the touch screen to work on just installed Windows?.  I have a PC from Toshiba 64 bit age of 3 years.

  Is there an online manual for instructions for Windows 8?

  Hello

  Thanks for asking!

  I understand that you want to know how to use the touch screen with Windows 8 feature.

   

  Let me know if I misunderstood.

  1. What is the model of the computer?

  2. the computer has the touch screen feature ?

   

  You should be able to use the touch screen feature when you install the operating system.

   

  If you can not use, then I suggest you to update the driver for the touch screen.

   

  Method 1: update the driver

  1. Place the cursor of the mouse to the upper right and click on search
  2. Type devmgmt.msc and press enter
  3. Now locate the touchscreen device, right-click on it and click Update.

  Method 2: Install the driver in compatibility mode

  If the problem persists, then I suggest you to install the driver for the OS version lower in compatibility mode.

  a. right click on the driver installation file , and select Properties

  b. Select the Compatibility tab

  c. place a check next to run this program in compatibility mode and select the operating system in the drop-down list

  d. let the driver to install, and then check the functionality.

  If there is no touch driver, then I suggest you to contact the manufacturer.

  I hope this helps. If the problem is still not resolved, come back and I'll be happy to help you.

• Portege M930 - entry of the finger on the touch screen no longer works

  Got one of these

  https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications

  Is no longer able to use the entrance of finger on the touch screen.
  Pen works on touch screen OK.

  It's like if I had accidentally disbled it somehow.

  Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.

  Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?

  Hello

  The fingertouch can be disabled.
  Go to the control panel? Pen & touch

  in the Pen and Touch Settings window, click on the contact tab
  Check or uncheck the checkbox next to your finger as input device
  Click on apply and then OK

• A1 7 "help please. I want to calibrate the touch screen

  help please. I want to calibrate the touch screen and I get touch calibration failed. "my tablet is lenovo ideapad a1 7"

  Oppressed accidentally touch calibration and restart the Tablet, but it is now very sencible and just put my finger is selected. I can not hardly touch the screen

  Sorry for my English. am Latino

  
  

• I have improved my all-in-one for windows 8 and the touch screen does not

  Hello, I have an acer aspire one, and I just bought and installed upgrading windows 8 from the Microsoft site. He installed an "auditor of system" 1 who reported a few minor problems, but none of them were associated with wifi or touchscreen. after upgrade both the touch screen or wifi do any work! Good start of Microsoft! Why can't just work? "Anyway - I googled a little and found this is normal and I should have installed a pre-upgrade Acer 1 pack?  Is is true that I can't find it anywhere and I wonder if it exists, can someone point me in the right direction and also let me know if I can install it now that I have already installed windows8! Thank you all

  FReeZA... Thanks a lot for your help!  everything is working now and Windows 8 work well on this machine!  I also had to upgrade the driver for the wireless card get that work and found them on this page as well as the touch driver that you sent me!  Thanks again. http://www.Acer.co.UK/AC/en/GB/content/drivers

• Help! Disable the touch screen on Envy Touchsmart Ultrabook 4

  Hi, I have a problem, try to disable the touch screen of the Envy Touchsmart Ultrabook 4 function in Windows 8... I was looking for an answer on how to do it, but I did not find anything. I tried the method of the control panel > hardware and sound > pen and touch and then disable the option "use your finger as input device", but this option is not there for me! If anyone knows how to do this, I would be very grateful.

  Hello

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

• I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  Hello

  You have a specific question for HP, it may be better if you ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.

• How to apply the touch screen for Samsung SyncMaster 204BM

  Original title: Samsung SyncMaster 204BM

  I want to apply the touch screen and the narrative and I want to know if this screen and Iam from the computer using portable

  Thank you

  Nora

  Hello

  I suggest that you contact the manufacturer for information links to the product:

  http://www.Samsung.com/us/support/

  I suggest that you check the manual of the monitor to check if it supports the touch screen feature.

• Disable the touch screen for a laptop Windows 8?

  I have a Dell XPS L702x infamous Ghost by clicking on issues where the touch screen randomly 'clicks' on arbitrary areas of the screen (mine seems to be in the lower right corner, often minimize all my open windows or opening calendar) and through the upgrade to Windows 8, it seems a former N-Trig driver who disappeared I would disable the touch screen. Now, I have no way to disable the touch screen, and while Google suggested release "Use your finger as input device" under the pen and touch, I don't even have this available to UN-click box on!

  So: How can I disable the touch screen on my laptop or y at - it a program that can do for me? I am indifferent in fact using the touchscreen - I'm more concerned with the ability to functionally use my laptop without sporadic clicks on my screen.
  Thank you.

  I had the same problem with XPS 17 my wife.    I needed to restore basic functionality so that disabling the touch screen was acceptable.     However, unlike samie (but like you) I didn't "Use your finger as input" option in the control panel.

  I tried to disable the device N-Trig driver in Device Manager, but the pilot did not appear to have be properly installed (after the upgrade from win7)

  I went on the N-Trig (http://www.n-trig.com/Content.aspx?Page=Downloads_Drivers) driver download site and download the new drivers for windows 8 (I have the feeling that they weren't here last week).

  I then when options "Device Manager" on the "Hardware and Sound" page of the control panel.

  In the Device Manager screen, I saw a node N-trig DuoSense digitizers with several below subnode (before dev driver install it there was only one).

  I right mouse button on the element at the top, with a name that ends by "between the roots" and select "disable."

  This touch screen successfully disabled.

  Pity to lose the touch screen, but my wife does not use it and I was in danger of my life, as it was.

• Why the touch screen is good for the design of the window?

  Touchscreen seems to be an approach of incorrect interface on the design window, I need a lot of lotion to keep my skin healthy, been to designers?

  Thank you

  Well, a touch screen is completely optional with Windows 8. While it is designed for you to use a touchscreen, there is nothing in the design that prevents you from using a mouse and a keyboard. In fact, IMO it works a little better with m/k with the touch screen.

  It's just an additional way to interact with your computer - touch screen is not intended to replace other ways.