Please help me to test this problem with CSR4 and Flash10.

Similar Questions

• I would like to cancel a subscription to Premiere Pro program. I can't support Adobe in Russia, it does not work. Please, help me to solve this problem

  I would like to cancel a subscription to Premiere Pro program. I can't support Adobe in Russia, it does not work. Please, help me to solve this problem

  Hello

  Please refer to l https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

  or

  Contact our support here Contact Customer Care

  You can follow the screenshot as below

  

  I hope this helps!

• Please help me to solve this problem of date comparison...

  Please help me to solve this issue..
  
  If i have some data like the following..
  
  
  ID           START DATE             END DATE
  
  1             20080101              20080501
  1             20080502              20080630
  2             20080631              20080801
  2             20080802              20080901
                                               ---------------> There is a break in date over here
  2             20080930              20081029
  2             20081030              20081130
  
  
  I need to compare the End Date with the start date (These data will not be in order)
  and find out if there is any break and should get the 

  release date: * 20080930 *.
  
  I'm trying to do this in SQL or PL/SQL. Please help me.
  
  Thanks in advance.
  Phani

  Hello

  Try:

  MHO%xe> select * from my_dates;
  
          ID STARTDATE           ENDDATE
  ---------- ------------------- -------------------
           1 01-01-2008 00:00:00 01-05-2008 00:00:00
           1 02-05-2008 00:00:00 30-06-2008 00:00:00
           2 30-06-2008 00:00:00 01-08-2008 00:00:00
           2 02-08-2008 00:00:00 01-09-2008 00:00:00
           2 30-09-2008 00:00:00 29-10-2008 00:00:00
           2 30-10-2008 00:00:00 30-11-2008 00:00:00
  
  6 rijen zijn geselecteerd.
  
  Verstreken: 00:00:00.14
  MHO%xe> select startdate
    2  from  (select startdate
    3         ,      lag(enddate) over (partition by id order by startdate) - startdate lr
    4         from   my_dates)
    5  where  lr < -1;
  
  STARTDATE
  -------------------
  30-09-2008 00:00:00
  

  By the way: 20080631 is not a valid date, so I adjusted it to 20080630.

• failure of the LCD... Please help how to solve this problem?

  Today, when I went from my laptop, a vertical rectangle in the meddle of my screen along top down (with less brightness of my screen background color).

  First I thought that it map graphic, but when I connect my laptop to my TV, the rectangle disappear, so it's right in the screen of my laptop.

  I tried to upload a screenshot turned to my office, but also the rectangle isn't here, so I see it only in my screen (average in the screen of my laptop). but I send a page to my office, and I used the paint program to give you an idea how my screen looks like

  but I couldn't uploaded here, you will enjoy if you can show me how to download

  Thank you

  It sounds like a hardware problem with your laptop, and there is probably nothing we can do to fix it here.  Have your phone checked by a reputable or approved repair facility.

• Does anyone know what the cause some programs not being able to access the Internet? I had this problem with TurboTax and now with my Magic Jack.

  The TurboTax program told me that I was not connected to the Internet, even though I was and now my Majic Jack, who has worked 10 months told me the same thing.  I did nothing g to my computer except upgrades of Microsoft/Windows and I am at a loss as what to do.  Can anyone help?

  Hi CherieRadigan,

  1. are you able to connect to the internet successfully?

  2. facing a similar problem with other programs on the computer?

  3. What is the full error message that you receive?

  4. do you have security software installed on the computer?

  If you encounter a problem with internet connectivity to TurboTax and MagicJack program, then check out the links below to the Publisher of the software and check if it helps.

  MagicJack

  Error failed to configure magicJack / if please connect to the internet and double click here / Internet provider cannot be found. Make sure that you have an internet connection / unable to connect to the service provider

  TurboTax

  Connectivity errors

• BlackBerry Z10 please help! m having a problem with the heat and does not

  my blackberry z10 stand up heat and my apps and setting are not open. When I click it, it redirect me to the 1st screen. even I can not open my setting too. so I can't do a securitywipe also. Help, please.

  Try a reboot first. Hold your power button for about 15 seconds, until you see BlackBerry on your screen. Don't release it before despite what may appear on your screen.

  If this solves the problem, you can reset your phone to factory specifications by using the link to BlackBerry. If I remember, once your phone is connected to the link of the button to press link Options is in the upper right and then Reload Software.

  Keep us updated on your progress.

• I reinstalled hearing CS6 and it keeps telling me "sign in failed".  Please help me to overcome this problem

  Help me to "sign in" with my adobe audition cs6 @.

  What is Mac or Windows?

  You can follow the steps mentioned here

  https://helpx.Adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Let us know if this helped!

• Please help me to solve this problem of icon ;-)

  Hi people, I was wondering if someone can help out me?

  .

  I love the globe in example 1. I tried over and over again to recreate it but can't.

  I love the glow and all the gradients that make it look at how it works and it seems large and dark;

  Now, I have a load of icons as in example 2, I don't like all the world on it, it just doesn't show on my dark background. I need these bits internal icon, in this example, the pointer but have one handful of others also.

  So, how can I get rid of the inner bit of example 1, giving me a globe that retains all its transparency intact?

  Then cut the pointer off example2, change its color to a light gray and insert this in the Center or the new world?

  Other icons I have and you need to do this with are; Facebook, Twitter, a phone, an e-mail and a few others.

  The purpose of having a globe example1 empty I can then cut the icons and the place.

  Thanks a lot if you can help or ideas.

  Pete.

  

  OK, that makes a quick screenshot. Take a look by using files (press F1 on your keyboard) for more help with the pen tool and other pieces of fireworks. Welcome back to work - I'll try and answer anything else that you have if you don't find it in the help files

  

• Please help me to solve this problem of CS5 - a poster the first time I'm user of long date

  While in the Middle, producing a large enough site, I get this error whenever I open a file in Dreamweaver CS5 and I can't view the file by using the button "Preview/debug in browser".

  Error:

  -By executing in_onOpen.htm onLoad, the following JavaScript error has occurred. In the file '_onOpen': it is not defined to onOpen-

  In addition, Dreamweaver let me not use/choose/Open the file. Browser preferences keep resetting.

  I went on the other forums and the points of the solution to the elimination of

  < user > / Library/Application Support/Adobe/Dreamweaver CS5/en_US/Configuration/MacFileCache-XXXXXXX.dat

  file is available, but I have no such file on my Mac OS X Version 10.7.3. I get as much as/Library/Application Support / Adobe.

  Actually I don't even see Dreamweaver on the list. (see attachment).

  Thanks for all tips - Lauren

  This article should help: http://kb2.adobe.com/cps/405/kb405604.html

  Start by 12 and 4.  Those are most likely.  Then, if it does not sail on the rest.

• I have had no success in installation of PSE 13 and first upgrade and saw today that apparentlyI do not have the 64-bit version as I would have.  Please help me solve you this problem?

  Are there no direct support from Adobe?  This is not good.

  03:20 more wrote:

  Are there no direct support from Adobe?

  You can always contact customer service by chat or by phone (phone support is available Monday to Friday during reach US in the day).

• When I go on some websites (such as cricinfo), I am redirected to a page of 123 find. I don't have this problem with IE, and when I re - install firefox, the problem reappears

  If I quit firefox and then restart your computer and access the page, I can go to the web site. Then very quickly, the 123 find program takes over.
  This happens at home, I have all the info here.

  Finally, the problem is solved by running malwarebytes. I've deleted and reinstalled firfox and the problem reappears. This occurred because the Trojan horse was in the plugins folder that was not deleted when firefox has been removed.
  After that the Trojan horse has been deleted by malwarebytes, the problem is not happening yet.

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck

  

• I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the safe mode and still no success. Help, please.

  Question
  I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, please

  To help other users find solutions, please come back to this Thread and connect you to the
  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• When is windows going to solve this problem with the download of kb2538242?

  When is windows going to solve this problem with the download of kb2538242?  Whenever I turn on the computer, it downloads and installs this update.  It says it is installed but the next time I turn on the computer it downloads and installs again slow down my computer until she gets.  When I hit the kb2538242 in bing it says windows will have a fix within two weeks.  Why so long?  Isn't windows discover these things before posting updates?  I use Vista, with Intel 32-bit processor.  What can I do about this problem or I have to wait on windows.

  George,

  You must contact Microsoft, don't wait until they release the patch.

  How to get help and support for this security update

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  -=-

  1. click on the "Start" button, click "All programs" and click on "Windows Update".

  2. in the left panel, click "Search for update".

  3. after receiving the results of the analysis, please click on "View available updates" under the "Install updates" button

  4 Please right- click the update (KB2538242), and then click "Hide update".

  06/19 / 1109:56: 23:00

• I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.

  I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.  With the help of 13 elements, I can successfully burn my movie on a disc (DVD) without menu.  The burning process is interrupted after that I added a menu.

  Rick

  First of all, please remove the stopper at the end of the content of the timeline. It is not necessary it and burn the causes of the problems.

  The main Menu marker should be OK, no similar problems as the stopper a.

  RTA