Please help with rundll problems!

Similar Questions

• Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

  Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

  Please refer to

  Error 207 to "install Adobe".

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• Please help with my problem of Bar Menu Spry Dreamweaver CS5

  Hello

  I would be really grateful if you could help me with my problem. I use dreamweaver CS5 (design mode) on PC and I use spry menus bar as my browsing. for some reason when I go to the sub menu there's going behind the text on the side of it. This can be seen here: http://www.moneymakingmonkey.co.uk/

  How can I change this?

  can someone help me? I'm sure its simple but I'm new on this (as you can probably since my site up to this HA)

  Thank you very much

  Liam

  Sorry to be the bearer of bad news, but the use of ridicule of absolute positioning is the problem, not the Spry Menu.

  If you change the z-index in apDiv14 as later, it should help the menu to be at the top

  {#apDiv14}

  position: absolute;

  left: 89px;

  top: 110px;

  Width: 221px;

  height: 237px;

  z index:900.

  visibility: visible;

  }

  GRAMPS

• Please help with the problem of Validation

  Recent changes: Yes, had to replace the hard drive of my laptop (I had three years and more)

  When error: when I copy the code returned by the validation tool

  What tool: GenuineCheck.exe (downloaded from http://www.microsoft.com/en-us/download/exe-validation.aspx)

  Windows Update stopped working, too.

  You will appreciate the help.

  RP3456

  Separated by the moderator of this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/validation-tool-gave-me-this-answer/e51e7172-5bc8-42AE-AAB5-7f3c2fc0a166#LastReply

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Please help with my problem of iTunes.

  Can someone please. I desperately want to use my 15 dollar one, but I don't know how because I have $0.83 left. Can someone please. Thank you.

  What exactly is the problem, you want to use your 'fifteen dollar' what? If you mean iTunes gift card then cash on your account, its value must be added to your existing balance: Redeem iTunes Gift Cards and codes - Apple Support

• Hello. Please help with a problem with extensions.

  I updated Firefox to version 10 and then 11. Since then I can not install all extensions in the browser. What is the problem? Thank you.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to do a check of compatibility or to see if there is an available update compatibility.

• Please help with the problem of driver SAS S10 6483

  I'm going crazy and I hope someone here can help.

  I am trying to load Windows 7 on a 6483 S10 which has a SAS hard drive.

  During installation, the system does not see the drive and ask for a driver.

  I can't find a SAS driver for windos 7 anywhere.

  Can someone help me understand this?

  Thank you!

  Bill

  Thanks, Erik

  It turns out that when I opened the box, it doesn't have a SAS drive, as I said.

  She and its a SATA drive or the computer is defective. IF its of not coming back.

  I was also told that Windows 7 will not work with it that seems hard to believe.

  I was led on a chase of wild goose by the seller.

  Thanks for your help.

• Please help with the problem of deployment OTA

  Hello

  I'm trying to deploy my application (for the first time) using a live approach.

  First of all, let me mention that I developed this application using the BB for Eclipse plugin.  It generated files jad and cod.

  I have 5 files of cod and jad for the application, all in a directory on a web server. Apache has been set with the necessary MIME types for jad and cod files.  When I use the browser on the BB to access the jad file, your browser correctly displays the name, Version, vendor, etc. of my application.  But then he said:

  This application requires the following modules, which are not installed:
  {followed by a list of my other 4 modules}

  This is obviously a true statement, but I thought that the jad would cause the BB get these other modules and install them automatically.  It would really suck if my customers had to manually install each of the 5 modules.

  It is therefore possible for the other 4 modules loading is automatic, and how I have to happen?

  Moreover, my OS is 4.2 and my application is written for this OS.

  Thank you
  Paul

  See if this helps:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=25327&query.ID=11...

• Is someone please help with a problem of Media Player

  I created with program from Steinberg Sequel Recording original music and transferred the WPL file in a file of documents and dragged to the tab burn of media player. When I try to burn it to a blank cd I get the message that the media player cannot burn the disk because the player is running and I have to wait a few minutes for other burning tasks complete and then try again. There is really no other burning tasks going on, but the program seems to think differently and puts an end to my efforts.

  Thank you

  Kenneth

  Hi Kenneth,

  Please try the steps listed in http://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/windows-media-player-cannot-burn-to-disc-because/692ef883-6b31-4257-9995-2f3d639ca2bf

  Let us know the results after trying the troubleshooting steps. Please do not respond if you have any questions.

• Please help with installation problems

  Hello, I'm new to the first 10 items and I'm stuck at the stage of project configuration.  I read a book on the use of Prime Minister, attempted to experiment with it, and I even contacted the Help Desk (they have been no help).  I am now hoping that this forum, which seems to be filled with competent people, can help me set up and get started on my new project.

  I used to do video production when we were still shooting on tape (Yes!), and there was no "configuration of a project" - in fact, there was no computer editing at all!  Now I want to make some videos as well as a personal project and, more important still, like a video RESUME.  The curriculum vitae is not for video work, by the way, but for a position at a place called Techshop technology educator.

  My ultimate goal is to have good looks (i.e. decent resolution and size) video that I can send them on Youtube and have as a type DVD video or even just a simple file that I can put on some removable storage (probably a USB key or flash drive) media and mail to my prospective employer.  If I understand correctly it will achieve this by editing together a final project and 'share' in two formats different-ok, save in a format (not clear about that) and upload them to Youtube as soon as the first (and then I need to find a way to do it on my channel).

  Now we come to my question.  I don't know what format to use.  And I don't know where to find what I SHOULD use.  Heck, I don't know even what image format uses Youtube.  My original idea was output to 4:3, product final SD because A) I am familiar with that kind of video of framing and B) I thought that it would be visible on any monitor, a regular or large screen, without break or black bands.  Finally, it was important because I wanted people on Youtube to watch in full screen and get as much clarity and size as possible.

  I made my original film on a Panasonic SC - V10 cheap camera (I know, I need better, but that's what I have).  I think I shot most of it at a resolution of 920p, and I'm sure that it was released in 16:9 format.  A little images, stuff, I really didn't remove, time is at p. 1020.

  However, I think that I myself has really shot in the foot here - I did not use the premier capture images in my project!  I filled out my SD card, so I just moved the files from the SD card manually on my hard drive and deleted from the SD card.  Now, they are all in. MP4 format and I really cannot go back and reshoot.  I learn, however, that the Prime Minister is VERY picky about what he's going to work with and I need to somehow be import these files into my project or convert them with another program (I have a called Wondershare that looks nice) THEN import them.

  All that being said, here are my questions, and I hope that if you will forgive me if they are really noob or have already been addressed:

  (1) do I need out in 4:3 format?  Is this a good idea?  Or should I really, really let him alone to 16:9?

  (2) is it an easy way (ish) either convert the image format inside of the project (don't forget, I want not out on Youtube or a normal file with black stripes) or BEFORE I start editing?

  (3) in the light of the I start with raw images and the final product with that I want to finish, how I need to set up my first project when I create?

  (4) what is the best way to get these MP4 in my project?

  It is a very long message and I deeply thank you for sticking with me and help out me.  I hope I can do the same for you one day and thanks in advance for the help!

  Andrew

  First, he must know what you are editing, so you can do a project that corresponds to your video

  Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037

  What is a CODEC... a primer http://forums.adobe.com/thread/546811

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037

  .

  A report with the codec of your file details, use the programs below... a screen capture works well for people to SHOW what you do

  http://forums.Adobe.com/thread/592070?TSTART=30

  .

  For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  For Mac http://mediainspector.massanti.com/

  Then, help help you to start your project

  Basic http://forums.adobe.com/thread/537685 of Steve training tutorials

  -v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/

  -All the http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/

  FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq

  ADVICE http://forums.adobe.com/community/premiere_elements/premiere_elements_tips

  Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/

  The http://help.adobe.com/en_US/premiereelements/using/index.html User Guide PDF

  Right click on the PDF link located in the upper right corner and select this option to save to your hard drive

  You bring a project to match your video, then do the different codecs and/or sizes when you are finished

• Please help with a problem with Adobe Acrobat Professional 7.10

  I created a form using acrobat professional 7.10 and the form requires the signature. There are few people in the office with acrobat professional and I want to activate adobe reader usage rights. I can't find this button anywhere in the program.

  Is someone can you please tell me how to go about activating this feature in my form.

  This feature is available as Acrobat 8 Pro.

• Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

  Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

  Seeking help with a problem with the LR

  
  

  I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

  "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
  . (1).
  .....

  I tried to increase the size of the file several times,

  I left LR

  I restarted the computer.

  
  

  Any help or advice for this problem will be greatly appreciated

  
  

  Thanks in advance

  
  

  @stu

  Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

  Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

  Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.