plenty of restart and repair my windows vista dell, need help

Similar Questions

• canoe to update windows vistA, C8000408, need help error code on this

  Cannot update error code windows vista get C8000408, what can I do?

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the complete error message you get?

  Method 1: Run the SFC scan and check if system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: I suggest that you put the computer to boot and check if you can install the updates:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also check out the link:

  What are the error codes and how can I use them?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

  Reference: The problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I had a sidewinder precision wheel & pedals I want 2 install on windows vista I need help

  I need help 2 install my sidewinder precision wheel & pedals on windows vista b'cause i dnt be disk of da

  Hello

  I see that the Sidewinder precision wheel is not compatible with Windows Vista. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?s=SideWinder%20precision%20wheel&type=hardware

  I suggest to download the software from the link below and then install it on the system and check if you are able to install the software in compatibility mode and check if it works or not.

   

  Step 1:

  Download the software from the link below.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=97d044f9-6f55-4804-9cf0-f97c5d5f891b&displaylang=en

  Step 2:

  Install it in compatibility mode and check.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  I suggest you to refer the below link.

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What does Err1 and Err3 when you restart your PC with Windows Vista?

  What does Err1 and Err3 when you restart your PC with Windows Vista?

  Hi MichaelNessel,

  1. What is the full error message that you receive?

  2. don't you make changes on the computer before this problem?

  3. What is the brand and model of the computer?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options. I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.

  problem reinstalling windows Vista operating system.

  I'm trying to reinstall the windows Vista operating system.  When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options.  I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.  How can I solve this problem.  Thanks in advance for your support.  Valerie SG

  Why you want to reinstall your PC? It could be that you don't need to reinstall Windows, and solutions you could solve, which is recommended.

  However, if you want to reinstall your Windows, it's NOT F8, F8 key belongs to Windows and he'll fix the problems. To reinstall Windows, you must use differently for Dell steps:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_347576&isLegacy=true

  And for more details, you could visit the Dell Web site and search for your model and find the method to do this, or contact technical support:

  http://support.Dell.com/

• I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  After starting my Windows I got these message below

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.256.6
  Locale ID: 2052

  More information about the problem:
  BCCode: a
  BCP1: 00000000
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 82E9837B
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini041011-01.dmp
  C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
  C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt

  
  C:\Windows\Minidump\Mini041011-01.dmp

  View your dump using file:
  BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  For each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.

• Satellite L300 - perform a repair of Windows Vista installation

  Hello
  I have a Satellite L300. I have NO dvd of windows vista, the seller told me that the dvd of windows found in the pc.

  Now I have to solve a problem of windows update (80073712 - kb 971644) and in this link http://support.microsoft.com/kb/957310/en-us I do not know how to perform the steps in method 3, because I don't have a vista dvd.
  Can you help me???

  * Method 3: perform a repair of Windows Vista installation *.
  * When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.*

  * To perform a repair of Windows Vista installation, do the following: *.

  * Restart the computer
  * Insert the Windows Vista DVD in DVD of the computer dur.*

  * Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the search box, and then click Configure in the list programs. Then, click install maintenant.*
  * Click go online to get the latest updates for installation (recommended). *
  * Insert the product key if you are prompted for it.*
  * Click to accept the Microsoft software license terms
  * On the type of installation you want screen, click Upgrade.*
  * When the installation is complete, restart the computer and try again to install updates again.*

  Hey,.

  I m a bit confused now
  What exactly happens on your laptop? You can start Windows?

  I think the article MS says it all: to repair Windows you need a disc of Microsoft Vista.

  Alternatives to reinstall the entire system use the Toshiba recovery disc that contains a picture of the factory settings. Have you created this disk?

• R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

  R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
  This message is pop:
  Microsoft Visual C++ Runtime library
  Runtime error!
  Program c:\windows\helppane.exe
  R6034
  A request made an attempt to load the wrong C runtime library
  Please contact the support team of the application for more details
  This message appears as soon as the machine restarts
  Happens if I try to run Skype
  There is no problems until the updates have been installed
  This problem is urgent that this computer is used for a company
  Thank you
  David Schlachter

  Hello

  In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

  Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

  Then uninstall and reinstall the software Skype and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hi, I get this error msg everytime restarts my system (with Windows Vista), pls help: ___windows cannot install important updates: __1) __2 KB978542) KB971644__3) KB974470

  Hi, I get this error msg everytime that restarts my system (with Windows Vista), pls help:

  Windows cannot install the important updates:
  (1) KB978542

  (2) KB971644
  (3) KB974470

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. for good measure, reset IE now by http://support.microsoft.com/kb/923737

  5. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer (32-bit) only; Run the difficulty in the default and aggressive modes]
  http://support.Microsoft.com/kb/971058

  6. restart once again & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I repair my Windows Vista TOSHIBA laptop without lossing all my files?

  original title: How can I repair my Windows Vista TOSHIBA laptop without lossing all my files?

  I would like to repair my Windows Vista Home Premium 32-bit TOSHIBA laptop, because, as I said in my other earlieron of the question in the day ("How do I SAVE my user accounts on an external hard drive" ") does not my Systerm programs. More of this issue, I would like to know how to fix my laptop. Which breaks it was that I installed the Pack 2 of Vista Sevice! Dose anyone have any idea on how to fix it?

  Will324

  I would like to repair my Windows Vista Home Premium 32-bit TOSHIBA laptop, because, as I said in my other earlieron of the question in the day ("How do I SAVE my user accounts on an external hard drive" ") does not my Systerm programs. More of this issue, I would like to know how to fix my laptop. Which breaks it was that I installed the Pack 2 of Vista Sevice! Dose anyone have any idea on how to fix it?

  Will324

  Hey Will324

  link below has how to do a vista repair install

  It is made of wihin a vista operating system

  you are not for this toshiba recovery disk

  you will need to borrow a dvd microsoft

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  or backup your data and reinstall

  Contact the computer manufacturer and ask them to send vista recovery discs

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Save all data, because it will be lost, do the above

  Walter, the time zone traveller

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• How can I uninstall windows 7 and return to windows vista?

  Uninstall windows 7 Home premium

  How to uninstall windows 7 Home premium package and re install windows vista Home premium SP1

  Given what you have...

  Get/use your Windows Vista Home Premium media (and product key) to start to go and destroy (create new partitions and format) everything that you installed and install again.

  Once you have Windows Vista Home Premium installed, get SP1 and SP2 (in order) to get Vista to update Service Pack, then get all the post-SP2 hotfixes/updates to update installed.

  You also need to locate, download, and install all the drivers for hardware devices,-either by the manufacturer of the computer as a whole (if it's a Dell, Lenovo, Gateway, HP, etc.) or by each manufacturer of components support pages (Intel, Realtek, various manufacturers of motherboard, AMD/ATI, nVidia, Broadcom, etc..)

  You can then install all other applications (office suites, photo-editing suites, video editing suites, Internet plugins, alternative browsers, Internet plugins, etc) and activate the paid applications using the appropriate series/product numbers.

  At this point, you can restore all your backups (documents, music, photos, emails, contacts, databases, spreadsheets, presentations, Favorites/internet Favorites, etc.) on the computer.

• I using Madden 2004 and Emachine with windows Vista aT5064. It will not install on second disk

  I using Madden 2004 and Emachine with windows Vista aT5064.  disc, it will bring up a screen with options for more information, installation, play, udate and quit smoking.  When I drive during installation it says unistall, when I choose the game he wants the game disc, when I put in the second disc there is an error asking if I want to play the game without sound (check the drivers) and when I choose Yes

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• I installed a new hard drive on my computer and re-loaded windows vista. Will not be installing SP1

  I installed a new hard drive and re installed windows vista. I can't install SP1 because it is not supported anymore. Can I install SP2?

  1. Learn how to install Windows Vista Service Pack 1 (SP1)
     http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx
  2. Learn how to install Windows Vista Service Pack 2 (SP2)
     http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Manually install the SP1 and SP2 then.

  The links above will advise you where to get the standalone etc versions.