Pls help loop problem

Similar Questions

• Problem with my iPhone 6s, while charging or using internet, he rejects a higher amount of heat! Pls help me...

  PProblem with my iPhone 6s, while charging or using internet, it rejects higher amoun of heat! Pls help me...

  Certain amount of heat is normal using a particularly intense use as a streaming video

  Can I restart a Force

  Restart your iPhone, iPad or iPod touch - Apple Support

  If the problem persists

  An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What is the exact error message do you get?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2 :  If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3:

  Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• problem with my cd/dvd drive... pls help!

  I have windows 7 ultimate! I have problem with my hard drive! I use lg drive and all of a sudden it reads only the CD-ROM and the dvd rom no! its disturbing me a lot! pls help! Thanks in advance

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error "uh oh, the stage of rendering impossible.". Some features may be disabled. "pls help to solve this problem. Can't function without it

  Cannot use the extract error is: "uh oh, step of rendering impossible.". Some features may be disabled. "pls help to solve this problem. Can't function without it

  The forum of the extract is HERE.

  From the looks of things on this forum, you are not the only one having this problem now. Maybe someone will have an answer.

  -OB

• looking for someone to help me with this problem. "It is no set application to open the document"stream_000b.strings ". "How can I get rid of him. pls help

  I get this message when I turn my macbook pro on "there is no set of application to open the document"stream_000b.strings ". "How can I get rid of him. pls help

  Check preferences system/users and groups to see if this item is in your login items. If so, select it and use the sign less to remove.

  If she is not there, see if you can find the file by using one of these programs. If you go Finder/display/show bar path, it will show you where it is located. You can then remove it.

  EasyFind-replacement of Spotlight

  Find any file

• serious problem. pls help!

  some "khar khar sound is coming from at the bottom of the keyboard from my hp g6 pavillion 2231 all the time when the Lalonde is running.» What to do. I'm tired of this noise. pls help!

  Hello

  Sorry khar khar?   Mainly under the keyboard sounds would be Fan or HARD drive that could mean either the fan (if fan) is struggling to move due to dust build up OR the hard drive is a failure, it is difficult to give you a firm answer without more information. Can you tell the difference between the noise of the fan and hard drive noise? When you start up from cold noise not start immediately or is he only heard talk after Let's say 5-10 minutes?           Checkurtech

• I had a big mistake, my Palm tungsten E2 counldn can't start! pls help me!

  It there!

  I had a big mistake when I installed PIM update for my tungsten E2, although it supports only for tungsten E.

  After installing the PIM update. It took reboot. I rebooted and it does not start. It displays the palm logo after 5 seconds and turned market and stop...

  I confused. My contacts still in there. How I recove my contacts or he'll go.

  Pls help me. Thank you very much!

  

  At this point, it seems that your device is in a reset in a loop because of the incompatible application.

  Try warming system reset in the following link to see if you can stop looping.

  Click on the following link for the Web page of kb.palm.com for the article about the reset procedure.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=887

  If you can get the device to stop a loop, try hotsync and see if you can get your data backed up.

  After synchronization, you will need to do the following to remove the incompatible app of the sync process ' ing.

  Hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Then before of you hotsync your data back you will need to rename your backup folder, to do than go here.

  XP
  C:\Program files\palm or palm one\ [hotsync username]------and rename your backup
  file Backup.Old

  Vista
  Start--> documents\Palm OS Desktop\ [hotsync username]------and rename your backup
  file Backup.Old

  Then hotsync from your current name of hotsync and all your contacts, calendar,
  tasks and memos coming back.

  Show the file extensions for XP or Vista

  XP
  If you cannot view the extensions of file on your PC I would you open a
  folder, go to Tools--> Folder Options--> View (tab) and under Show hidden
  files and folders to uncheck Hide extensions of known file types.

  Vista
  Open control Panel, go to--> View (tab) and under show hidden folder Options
  files and folders to uncheck Hide extensions of known file types.

  If the previous steps do not resolve your problem, you will need to hard reset.

  You can try a hard reset to fix the problem. The hard reset will erase all data on the device.

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• My Ethernet port is not running iMac mid 2011. Pls help me.

  Hi, I have an iMac 21.5 "mid-2011. My Ethernet port is not working. Is this a software problem? Pls help me.

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  Try another ethernet cable.

  He still does not? A report with the information more wrote an effective communities of Apple Support question

• I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks

  I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Aspire R7 572G touch screen stopped working after a windows update 10, pls help

  I made an update of windows 10, but to my dismay, I lost my duties for the touchscreen. I checked the properties of MY COMPUTER and he now says pen and press enter not taken in charge. Pls help

  Hmmm... I upgraded my R7 572 G but my touch screen is ok. I don't know what you were doing. However, my problem was that the screen is not rotates in Windows 10. So I went to this folder to run as administrator to solve the problem of automatic rotation and it works. C:\OEM\Preload\FIXAUTOROTATE\EnableRotate.cmd

• activation of the xp SP3 after reinstalling on the same laptop computer. pls help

  Original activation key (removed product key) helps to activate the xp SP3 after reinstalling after formatting C:\ due to the virus on the same laptop computer. pls help

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Please DELTE YOUR KEY - before it gets stolen and subsequently blocked.

• Pls Help: My Bing Map update 'doesn't;" How can I configure HP (Bing) card as default map application?

  Pls Help: My Bing Map update 'doesn't;"the Pre suppose several times I start Googlemap & displays the link informing me that I need to upgrade to HP map (Bing Maps).  When I try the download & upgrade, I can launch the application directly from the upgrade page.  But any other method to launch the card application sends me to the 'google-> Bing upgrade screen' again and will only start after re - download the app & reinstall. The next time I start the application... it fails again.

  Looking at the Device Info app, it seems that the upgrade script fails to update the list of the built-in Google maps v3.1.32 cards HP apps.  When you try to list the applications in the device information, it still shows Google Maps v3.1.32 rather than HP cards.  HP cards... is not see the same list of applications at all.

  How can I get the upgrade to ' hold?

  Note about this pre: is this pre running WebOS 1.4.5 / Sprint 2.5.   He was previously wiped out, which he put back in its original state.  Now I can't the cards to run right.  Any idea y?

  So, I have my answer.  And for ten to twelve people who are still on the Palm Pre and attempt to provide a new phone, I will set out the details here.

  For Bing Maps to stick, you need to use WebOS Doctor, assumming that at one point, you downloaded the Updater of Bing Maps app.

  I was having problems is because the process of provision of sw of cards which is taken in charge through the catalog app does not set the palm pre to replace the existing Google Map application correctly.  To do this, Palm (or HP) had used ANOTHER application called "Maps Updater."  It was that when you got the error of googlemap prompting you to upgrade, it you linked to a Web site that would allow you to supply the Bing Map app WITH this update of map app.  Now, something has changed, and what you get is a Bing map application installation.  Map update application is one that removes the references to the Google Map of default and directs to the cards instead.  Download Maps of the catalogue is NOT synonymous with downloaded Maps Updater application.  Once I run WebOS Doctor, and connected to my profile of webOS, he proceeds to download aaaaaall the apps I had already downloaded, and at that time there he downloaded and installed the backup app Maps Updater, which took place and restarted my phone and my camera set up correctly.

  Finally!

• Re install BIOS Pls Help

  Hello

  My computer is HP 430 Notebook PC. This is a brand new. but I did not get any CD driver with him. while I downloaded all the drivers for Windows 7 Ultimate 32 bit on HP official website. There is a driver called as below...

  
  

  

  

  

  So I press start to update the BIOS. at that time there than in the red question marked area (?:?) got the massege "do not shut down the PC when the update is complete" like that.

  
  

  during the update my PC has low power. Then it's the exit ramp.

  
  

  Now the problem is when I turnon my the computer power light but no display no sound, nothing comes on the screen. I think that the BIOS has been deleted or corruption. pls help me to do something about it. It is very useful for me

  
  

  Thank you everyone

  Looks like this power loss that happened after that BIOS reflash had progressed too far to recover, you may need to have HP reflash the BIOS eprom in their establishment. Call HP and ask them how to get it. Since it is still under warranty, you will not have to pay for the fix.