Similar Questions

• Built in WEBCAM stopped working. Also get the CODE of ERROR 8OOBO100 with Windows Update

  have bee away on vacation for 5 weeks came back and cannot get my webcam integrated in Dungeon is said to turn on the camera, working also get erroe code 800B 010 for a update

  Hello

  for integrated webcam problems looking for the latest drivers and software from the manufacturer of your laptop

  or ask in their forums

  When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive the following error message:

  0x800b0100

  http://support.Microsoft.com/kb/956702

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• HP Pavilion dv5237cl Notebook intermittently Shuts Down Due to a thermal event, fan stops working

  Basics:

  HP Pavilion dv5237cl

  Windows XP SP3 32 bit

  PCMCIA SATA card

  1 TB WD Scorpio blue HARD drive

  Computer laptop with 200mm fan cooling pad

  Some USB devices

  Latest drivers and BIOS

  Note: This problem also occurs with Windows 8.

  For the last year my HP Pavilion dv5237cl turned off because of the fan does not work.  I have never seen the term "Thermal event" displayed prior to or on restart.  Usually just abruptly, he died.   I also saw a few BSOD that are not very descriptive to pointing to what the cause was and may be not related.  The laptop usually just stops working and goes out, maybe once every couple of days if it is caught in time.  I HAV been using a Defragmenter memory to help as appropriate the BSOD were due to low memory resources.  I am tracking the temperature of the CPU and have noticed that it is high, when the fan is not working.  I saw up to 85 C and I'm not sure but think that the laptop stops at 100 ° C.  The fan is usually always go at least to a low hum.  Usually, on startup, I get a strong burst of activity fan and if this isn't the case I'm clued in to a fan, not to exploit the condition.

  If I take a PIN regularly and carefully stitch it through the opening in the fan and cause rotate the blades of the fan, the fan will usually start working.  It sometimes takes a few tries.  I noticed the fan poll as it is sometimes wobbling and resembling a noise of ball bearing, but I think it is also maybe a hinged fan.  Some hopping may be due to the time that I used the pin code.  Fan usually settled in a low purr and lately with some ball light bering sound, maybe just wobble.  If I'm not there when the fan stops working or do not notice to try to remedy with a PIN, then the laptop stops due to excessive heat.

  Things I've tried or thought of trying:

  -J' I used canned and out air / blow accumulated debri from inside the vacuum cleaner to suck up and cleaned the vents.

  -J' I add the cooler that keeps time less around 5 c.  The laptop temperature was 55 to 62 C this winter.

  -Install the latest drivers and BIOS.

  -Tried to use Windows 8.

  -J' bought a replacement fan but did not want to disassemble the laptop to install it and also not be

  not know if it is really a material fan or a control sensor or other hardware problem or software problem.

  Thanks in advance.  Help to solve this problem would be appreciated.

  I understand that your laptop stops due to overheating.

  Given the behavior and how the fan no longer works and must be "started" once again, this does not sound like a fan failure.  Page 5-60 of this guide details the process of replacing the fan and the heatsink in Notepad.  If this is something you'd rather not do it yourself, you could contact a local PC shop for the fan and the heat sink replaced.

• Satellite Pro M70 - cooling fan stopped working

  Hello

  I have a laptop M70, I have recently identified as not very hot when in use. I have now identified that the fan has stopped working.

  Any ideas how I can get this fan, so I give it a clean and check that the connected fan isn't loose etc.?

  Thank you

  Are you sure that your cooling module has stopped working 100%?
  Maybe the cooling module is ok but cannot run with maximum performance and can not cool the CPU correctly because of the dust and debris inside the laptop?
  What do you think of this theory?

  I can tell you that I read a lot of stories and gossip on overheating problems and be more honest to these issues could be solved by cleaning fans.

  I clean my cooling fans from time to time with a jet of compressed air.
  These sprays are professional tools and can be purchased in most dealers specialized computers.

  But if the fan has stopped working and then a jet of compressed air will not help you.
  In this case, a technician must check the laptop.

  Maybe the laptop must completely disassemble to remove and replace the defective part.
  This procedure is really tricky and must be performed by a technician for laptop.

  Good luck buddy

• 13 yoga fans stopped working

  Today in my Yoga fans stopped working. Anyone know what could be the problem and how to make them work again. My Yoga is now warm enough. Some bios settings? Something is reset in Windows? I tried reset bios and windows several times, but the fans never start. They are completely dead.

  Problem solved. Restarting windows, the default settings in the bios, the bios options for managing thermal, flashing the bios did not help. But dry battery and restarting of yoga has helped

• Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  frohnj,

  See if This THREAD helps. It is for another printer, but should work for you printer, too.

  Rick

• "windows host process RUNDLL 32 has stopped working" I ran the cleaning disc etc. without success. Help, please!

  Internet explore and Incredimail has stopped working after power failure with the following error message "windows WHAT RUNDLL 32 host process has stopped working. I ran the cleaning disc etc. without success. Help, please!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Dell XPS 15z 720 p to 1080 p transition L511z

  My situation is Im trying to upgrade my lcd 720 p to 1080 p screen, ive made it work with another computer, an hp without problem, I had to replace the display cable and the lcd screen, now I have a XPS 15z (L511z) it has LCD 720 p with resolution resolution: WXGA and LCD cable which belongs to it (part (: N6MMX). I recently bought an LCD 1080 p which belongs to the 15z (L511z) XPS
  Now the reason im post this is because I know that the part of screen 720 p is N6MMX but im hoping someone will give me a link from where can I get good lcd (video cable) to the 1080 p or part number

  Finally someone has the part number for the LCD 1080 p for the XPS 15z L511z cable?

  This screen appears for a Latitude/precision - not the XPS.

  Apparently, there are two different, incompatible screens between them to 1080 p used in this system-

  B156HW03 V.0

  and

  B156XW03 V.0

  You should probably ask a seller to Dell parts as parts - People.com you need one - it seems that most places sell a full upper set (display, bezel, hinges, cable) for this model - not only the Panel.

• Satellite A110-351 - fan stopped working

  Hi, this is Michael from the Hungary,

  There is 1.5 years, I bought an A110-351, last year I had these problems:
  1.:when, I turn on my A110, he asks for a bios password. So I contacted my local toshiba authorized service center to solve this problem.
  They said that is not covered by the warranty.
  So I came and they charged me about 120 USD to remove this password BIOS-thing.
  And now when I was looking for new drivers, I noticed my problem in this bulletin (Document ID: 98082361):

  ".. The appearance of this problem on any particular computer is unpredictable - it may never happen, but it can happen any time the computer is turned on. If this problem occurs, it will be necessary to send the computer to Toshiba authorized service provider, which will fix the problem free of charge for you. »

  2: after that, I was happy that I can work with my Toshiba, then an another problem cams:
  The fan noise was weird, and after a few days, it is almost stopped working (no significant air ventilation).
  So I contacted the service center again, and the others were still mentioned above... charged me again.

  Guaranteed, Yes... I have the warranty until 2009-05-09. But I don't think that means anything. So I don't think that I would recommend to anyone I know in the future.

  Any response? I made a few mistakes, or what is normal?

  Hello

  You're talking about this document:
  _New BIOS corrects market password incorrect prompt_
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletin.jsp?soID=1863789

  First of all it is a Toshiba page we and your model of laptop is not referenced, so it's really hard to say if your laptop could be affected...

  In addition, the doc also says this:
  + If this problem occurs, it will be necessary to send the computer to Toshiba authorized service provider, which will fix the problem free of charge for you. +

  So you have to pay for it I recommend contact the ASP in your country and clarify this issue.

  In addition if you warranty is still valid, then the question module cooling must be set free warranty covers replacement of defective parts

  Welcome them

• Audio not working Dell XPS 720 H2C with Windows 7

  Buy a Dell XPS 720 H2C with XP in 2008. Last week made a new installation to upgrade to Windows 7 (made by Micro Center). Have tried to get help through Dell... a lost... cause the last time I buy Dell. The audio card is a card OEM, "Driver Creative Labs Sound Blaster X - Fi XtremeMusic (D). Everything else seems to work very well. Diagnosis of device driver shows that everything is OK.

  Any ideas where to go from here?

  Answer was not helpful, but I appreciate the effort. Found the second site was a bit Advanced for me but looked interesting enough to sue later. Finally chased the problem to map its; called Dell and ordered a replacement. Let's see if that fixes the problem.

• Adobe CS4 license stopped working on my new Macbook Pro. Error Code 150:30. What should I do?

  I bought the suite Adobe CS4 Web in January 2009.

  I recently bought a new computer (MacBook Pro) and when I try to open Photoshop or Adobe Acrobat, it tells me that the license has stopped working. The message is repeated after you start the computer with the error code: 150:30.

  What should I do?

  Error "Licensing has stopped working". Mac OS

  Be aware, however, that this can not work on OSX 10.7/10.8 due to compatibility issues...

  Mylenium

• Windows host process (Rundll32) has stopped working and the Manager device raises the error code 43

  Original title: Installation files

  I need to know how to reinstall a corrupted file. It's only an individual file which gives me the problem. I don't want to reinstall the entire windows file just to retrieve a single file. The file is the file that controls the video card (rundll32.exe).

  Hi Richstan06,

  Step 1: Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/GP/hardware_device_problems/en-us?EntryPoint=lightbox

  Step 2: The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can consult the documentation of the material for more information on diagnosing the problem.

  See the article below, which deals with a similar question

  Error message when you try to configure an audio playback device disabled in Windows Vista: "Windows host process (Rundll32) has stopped working.

  http://support.Microsoft.com/kb/953916

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Technology start Dell XPS 14 fast at startup error

  Recently, I bought dell xps 14 it worked fine for 1 week and suddenly one day my screen got stuck at the dell logo screen, with a bit of internet research provided me with the solution as (http://en.community.dell.com/support-forums/laptop/f/3518/p/19481127/20252015.aspx#20252015) SATA switch mode in the BIOS of intel smart response on AHCI and return back at the next reboot. It worked but I started to have the alert as "your system does not appear to be with technology intel quick ignition" after each reboot to the windows desktop screen. I tried to activate fast ignition, but I am unable to find the acceleration tab in intel Rapid storage technology app running in my system...

  any help on this would be appreciated

  Hi Osprey,

  Finally got resolved the issue , I tried settings as it is that I stuck in the previous post screen except that I have selected the size of the cache as 18.6 GB and clicked on ok and received the error something like

  "An unknown error has occurred while an operation was underway. "The operation could not be completed ' ,.

  I googled for this error and the solution found in dell community threads

  'http://en.community.dell.com/support-forums/laptop/f/3518/p/19477302/20234628.aspx'.

  I followed the solution of Sujatha K and it worked perfectly and TRIE is enabled.

  Finally, I used a document"http://en.community.dell.com/cfs-file.ashx/__key/communityserver-components-postattachments/00-20-08-79-33/Intel-Responsiveness-technologies-0.91.pdf" to set up the Intel Rapid Start technology. Now everything is fine and my system is powerful.

  Thanks for your help

  Chandra

• One of my programs that BSE Market Watch stopped working after I started to date of Microsoft today, pls help.

  One of my programs, observation of the BSE market stopped working after I got updates for my Windows XP today (03/07/2010).  BSE is the Bombay Stock Exchange and I got BSE mKT Watch free program from the Bombay Stock exchange website and it is very important to me.

  Uninstall the updates that you have obtained on 03/07/2010 and see if that solve the problem. If so, then install updates one at a time to see what update stopped the program run.

  If on the other hand, the program is still defective, then this is perhaps a problem with the program itself.

  Please investigate the above and post back with the name of the update or if, in fact, it is the program that was the cause of the problem. TaurArian [MVP] 2005-2010 - Update Services

• Dell xps 8100; Disk failure hard error 2000-0142 0 self test status 79

  Hi guys, I was wandering in the forums for a few hours, now looking for ana response to this question, and can't find anything clear. I have a XPS 8100 that I run a diagnostic and received a 2000-0142 error code that says MSG: error code 2000-0142 hard drive FAILURE 0 self-test status: 79 based on what I read in the forum is that there is a disk failure, and the only recourse is to solve the problem in my view is to replace the drive. Firstly, can someone please give me an absolute confirmation that it is indeed what I have to do, or is there something else I should do to fix this problem first? If a replacement drive is there someone could please tell me how can I do to get my OEM software off the coast of the partition recovery and on my new drive. I now office preinstalled and, of course, premium Windows 7 I would like to see on my new hard drive and I was not provided with one of the disks at the time of purchase. Thanks in advance to all those who respond

  Hi XPS8100kid,

  Welcome to the Dell Community Forum.

  The 200-0142 error is for hard drive failure and you need to replace the hard drive.

  Since the hard drive has not, you would not be able to access the partition recovery on it. Data would be lost and the software already installed on your computer will need to be reinstalled.

  Windows 7 will need to be installed on the new hard drive. Please click the link below to get the procedure of re - install Windows 7.

  http://Dell.to/15MYHsz

  If based in the United States, you can ask for the backup drives by clicking the link below:

  http://Dell.to/Zj7oHA

  I would like to know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .