Plug-ins are grayed
Sudeenly my third-party plug-ins are grayed in CS5. I did something to cause this? How can I get them up and running. I miss my Noiseware! Thanks a lot for your help.
Plug-ins become grayed out when you change a document format (for example, Mode) the plug-in cannot handle (for example, a plug-in may be capable of running on an 8-bit RGB image and you have a picture of the 16-bit CMYK, that sort of thing).
-Christmas
Tags: Photoshop
Similar Questions
-
The menu "Edit in" is completely idle. All plug-ins are visible but gray; that is not accessible. No idea how to fix? FYI: I use LR 5.7.1 on MacBook with Mawericks.
There are chances that you are working with smart insights? External editors are not available when you work on smart insights.
-
35 Firefox plug-ins are not loading.
Recently updated Ghostery and since then I've lost the ability to watch videos on all pages. I tried a lot of solutions to correct this. None worked. The only solution that which was left was me so said they start for EACH Firefox problem is in 'safe mode' or update Firefox each moderator of Mozilla. I did a refresh by accident. But always had problems even after only 3 modules. And I went ham on Firefox and delete everything off my deleted pc the Mozilla folder after that I uninstalled Firefox. Then I went to load Firefox from the ground upward.
Well, since I did it miss me ALL my plug-ins. So I updated adobe... nothing. I uninstalled Adobe Flash Player and it reloaded. Nothing. I did the same thing for VLC. Nothing.
2 Plug-ins that are listed are from the folder I added an old Firefox data I saved. Question is on Firefox 35.0.1 why plug-ins are not installed?
Solved.
What Did I Do? I refreshed Firefox...
(1) pluginreg.dat deleted
(2) threw in the folder an old copy of pluginreg.dat from when he worked
restarting and it picked up everything.Just having now question flash crashing on the pages as soon as the page loads.
-
What plug-ins are not needed?
I don't know what plug-ins are necessary and should be deleted.
Thank you.
Hello
Check out these pages:
Recommended by Firefox (install/update): Firefox plugins to play audio, video, games, etc.
Not recommended (remove or disable) by FF: Firefox list blocked modules.
hope that answers your question.
-
I have an iMac. Mac OSX... Version 10.5.8 I had Firefox installed for a long time and use it more often than Safari these last time. However, when I'm on the FF page where it tells you what plug-ins are very good, and which are outdated (with a warning), at the top of the page, there is a message saying that my computer "does not meet the requirements to run Firefox. And yet I have it and use it! Maybe the message actually means that I can't upgrade to the latest version? But also I don't know if I should go ahead and try to download plug-ins up to date. Any input would be greatly appreciated. Thanks in advance.
You can also
Try to update to 10.6 and more if your computer supports (costs less than a new computer) -
"Check if plug-ins are up-to-date" does not "
The ' check if your plug-ins are updated "link on the page of the Add-ons Manager does not work properly. The link opens the page of Mozilla student Reps. I use Firefox 12.0
This problem has been fixed on the side of Mozilla in Bug # 752232
He tries to use https://www.mozilla.com/plugincheck/ and then gave an error when redirecting to https://www.mozilla.org/plugincheck/
Many pages of Mozilla that is found on mozilla.com have since changed, either by or is redirected to mozilla.org and sometimes problems arose.
-
How in the latest version of firefox now check to see if my plug-ins are up-to-date?
I just upgraded my firefox to the latest version, but I don't know now how can I see if my plug-ins are up-to-date or not? There is no header click on don't like years before using firefox, it just shows me that I don't have to if they are current or not plug-ins! It was on 11 15, 2016. Someone HELP!
Type of topic: addons
in the address bar to open your add-ons Manager. Access key; (Mac= ) A) On the left side of the page, select Plugins.
Top right is a link to check your plugins.
Use this link to make sure your plugins are up-to-date. If all are listed as unknown or research, don't worry to their topic.
-
My plug-ins are defined in CC PS not PS CC2014 and the external editor to the LRCC should be changed to PSCC to use my plug-ins. How can I change the external editor to make CC PS instead of CC2014 PS
Hi Alik!
Lightroom sets the latest version of Photoshop as external editor by default. However, you can set the CC Photoshop as an additional external editor in the preferences.
You can then call it with a keyboard shortcut or via the menu.
-
How to record down version Cloud Creative InDesign CS5? Exported as a file .idml but still the messages that plug-ins are missing, although CS5 confirms it is fully updated.
Yes. Thank you. I based on another post misled. Successfully done this by selecting 'File', 'save a copy... ". "then choosing"for CS4 or later (IDML).
He had little patience and several tests, but I think it was because of hardware (memory) overloaded version CC cloud or something. It was a 50 MB, file of 500 pages and took 17 minutes to convert/save,
Recap: dnuee to CS5, do not use "Export" (IDML); use ' Save as ' or 'Save a copy' and select "for CS4 or later (IDML).
Advice much appreciated.
-
I upgraded to CC PS PS CC 2014 and now my plug-ins are no longer available to use. How to make a comeback? I can navigate is more to the collection of NIK, my plug-ins "Topaz", etc.. They are still available on LR, but they do not now seem to be available on PS CC 2014
For "Topaz", COP shortcuts of Adobe Photshop CC\plug-ins program in the same folder in Photoshop CC 2014
I don't know Nik
BTW what kind of photos does a "photographic Psycho" takes?
-
PowerCore Plug-ins are not represented in exports?
Maaaaaaannnnnnnnn! I was just starting to forgive Audition CS5 for the botomy feature that he shot at us. Does anyone else get this problem? I use a TC Electronics PowerCore plug-ins, which, similar to the UAD plug-ins are treated using a PCI-e card. I can turn on plug-ins in CS5.5 and hear while I mix. But when I try to export my mixture, they aren't there. It even seems that if I had disabled all of my plug-ins PowerCore right before I exported. And it doesn't matter which of them I use. It does not include any of them in the export. I tried several solutions workaround... mixing bus effects first, the mixture down the bus master, do a session overall, pre-made tracks export, etc. Does not work. It's all the same. A mix beautifully lamppost and compressed exports completely dry and punchless. And it doesn't seem to be what I can do about it. Everyone can check what happens, and does it affect other plug in third-party PCI cards? Any ideas for a fix?
Hello
Matt here from the dev team.
It is not multitreading that is the cause but the fact that the multitrack clone us when we make a mix. The enthusiasm of the thread will not make a difference. So, if you use 1 DSP chip, when we realize a mix, we will use two (the original used during the mix and a mixing cloned one for new).
This works well when you have virtually unlimited of instances of plugins available with native effects, but can lead to audition 4 fills a hosted card with double effects fast enough.
The infallible only work around would be to trade securities finished to new tracks and dissable the original titles that rely heavily on the hosted effects. Or, you could just make sure that you have enough free DSP left in the Powercore to restore down.
-MattS
-
I used the visualizations for windows media player for years and have never had any problems. Recently bought a new laptop with Win 7 64 bit on it, and I can't play. It is not that thery are not there. I can see Alchemy and bars and waves etc, but there are no boxes to check next to them, as I keep reading everywhere. When I go in the history section of plug-ins I see boxes next to the options. I would like a litte thereby, help because when I connect my computer to my TV I like playing them as a screensaver. Thank you
When you right click on the current playback window, you don't see the visualizations?
If you pass the mouse over it, there should be the selections
-
Plug-ins are up-to-date, but Firefox plugin checker shows them as obsolete.
The auditor plug-in shows Flash to be obsolete, but checker plugin from Adobe shows that I'm updating. To also Firefox about: plugins page shows that my Flash is the correct version. I deleted the file pluginreg.dat and it has not solved the problem. Any other suggestions or is it your auditor plug-ins again?
The installed version of Flash 11.3.300.257 is the last available for Mac, so it's OK.
Only one published an update of Flash 113.300.262 for the Windows platform.
Thus, it seems that the plugin check page does not have your platform into account. -
I have all the plug-ins installed on my computer, it works with Internet Explorer but not with Mozilla Firefox
This is probably the plugin Flash and Firefox and IE do not use the same Flash plug-in. Your list of plugins shows that the Flash plugin used by Firefox is not installed. You use Firefox, you can visit http://get.adobe.com/flashplayer to install Flash. An alternative method (it is what I prefer), you can use the manual setup programs to install Flash, for details, see http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
-
I get the notice on all pages that I sail. When I go to update the plugins, I get a list and when I go to each an Apple or Adobe told me that my software is up to date for my system. I know there are newer versions, but they are not for processor Power Pc Mac with Tiger 10.4.11. Since I can't update I want to this notice went. Where I can it turn off.
You can try setting the pref plugins.update.url an empty string and the pref plugins.hide_infobar_for_outdated_plugin true on the topic: config page.
There is always a more recent Flash 10.1.102.64 drive.
See Flash Player 10.1.102.64 and 9.0.289.0 (published on 04/11/2010) (126 MB)
- http://kb2.Adobe.com/CPS/142/tn_14266.html Archived Flash Player versions
Maybe you are looking for
-
Backward compatibility of 2012 HP 90W Docking Station with 6710 b / 6730 b
We have a few 6710 b and 6730 b who need a docking station. Anyone know if "2012 90W docking" fits into these laptops? Thank you. P.S. This thread was moved from the company - Compaq, Elite, Pro for laptop - PC Compaq HP ProBook, EliteBook, slate/Tab
-
Converting C code for the calculation of the CRC in labVIEW
Hi guys, I am a bit stuck. I'm trying to implement a piece of code C in LabVIEW and I make an apparent error. You could someone compare code C my VI and tell me what I'm missing? Thanks in advance. For combination of Bytes1 and 2 CRC results must be
-
original title: Microsoft NET will not install I'm having so much trouble with Microsoft NET, I do not know where to start. First of all, after you have uninstalled all Microsoft NET software in an attempt to wipe the slate clean, I am unable to rein
-
HP Officejet Pro 8610: HP Officejet Pro 8610 - cartridge problem
My HP Officejet Pro 8610 has a "Problem of cartridge" error on the display screen. I tried all the troubleshooting steps and it will not erase. I replaced the ink with new genuine HP ink which is the expiration date and I contacted HP. They sent me a
-
Dell studio 17 with Vista Home premium 32. aged 22 months cannot start up.
I complete the sign in process, but after a while, the screen is blank. I started in safe mode, but the same problem occurs. I tried the system restore, but the message it says its already running. The process is cyclicle. I ran the diagnostics, but