PNG images are converted to the size of huge files

Similar Questions

• 2015 CC 19.1.0: anyone getting the size of huge files even on base vectors?

  After more than an hour with chat support I do not have an answer. I had made a few very small and basic flat icons for an InDesign document and noticed that the PDF has been exporting a lot larger than I expected. This is when I noticed all my files icon Illustrator were 600-700 KB each. I checked the files and there is no extra information hidden inside, I saved them once again with all kinds of compression/compatibility parameters passed around, saved as a fresh copies... nothing worked. Support had me trash my settings file and disable GPU performance, but the two did nothing.

  During the conversation of support that I did a test of a simple black circle of 1 "x" 1 file and it saved 1.6 MB. What the devil? Cat of support received the same result on their end. normally I'd expect an output something like this file to be < 100KB.

  My icon base coming to 652KB: https://dl.dropboxusercontent.com/u/3235553/icon_education.ai

  Out of the circle of test to 1.6 MB: https://dl.dropboxusercontent.com/u/3235553/Untitled-1.ai

  Griesdesign wrote:

  I just finished a session of chat with Adobe about this issue:

  Cat person: "just checking at my end as well as on a MAC with an empty file, this is 1.3MB. This is an expected behavior. "(my emphasis) apparently due to"several new features and services", the person said.

  Yes, this is the expected behavior. As I already wrote: the color profile has 1 MB. That aside, and you get a lot less filesize. When designing for in fact generally pointless printing a color in a file profile HAVE.

  Also: when there is work in the file, the file will get at least twice as large, because part PDF file contains as well. Please look at this subject files HAVE:

  https://Vimeo.com/117691712

  No, the many new features and services have nothing to do with it.

  And no, a feature request cannot decrease the file size. Because everything is how it works.

  Delete unused elements of brushes, symbols, graphic stlyes and swatches panels also will save filesize. There is even an action for it.

  And maybe, there are a few options here:

  9 ways to reduce the size of file in Adobe Illustrator - Articles - Vectorboom

• For an IMAQ image, how is calculated the size of the area of alignment to the left or to the right?

  For an IMAQ image, how is calculated the size of the area of alignment to the left or to the right? My initial assumption of the diagram

  http://zone.NI.com/reference/en-XX/help/370281M-01/imaqvision/imaq_getimagepixelptr/

  is that the left and right are equal. But that doesn't seem to be the case. Can someone tell me the magic formula? A combination of the border width and the width of the image?

  Thank you...

  Andrew

  Andrew_Scott_SPCi.ca wrote:

  All this appeared when I relalized that the mapss Pixel pointer the value 0,0 point of the image, not the point 0,0 of the largest container with areas of alignment and borders. Would be nice if the drawing in the documentation put it.

  This described in help, is not?

  

  Andrey.

• How do I place what the images are RGB using the separations preview?

  2 questions: 1. how to spot what the images are RGB using the separations preview? 2. is there an easy way to convert those to CMYK without opening each to the PS? I've done it before all the time but I'm rusty and don't remember how I did it. I'm on CS6.

  One of the many methods to discover, you can:

  (1) you can use the links Panel.  Open the links Panel. Go to the menu of the Control Panel, and then choose Panel Options. In the dialog box Options Panel, under Show column check 'color space '. Now, when you view your links Panel it will show the color space of all related images.

  (2) you can use the preflight and set a preflight profile. In the profile, go to the section color > color spaces and unauthorized Modes and check RGB. Then all RGB images have reported.

  (3) If you need to know before you place the images, use Adobe Bridge. Open the folder where the image. Use the metadata Panel and view the color space of images.

• Size of the image in relation to the size

  I'm just trying to get my head around the size of the image in relation to the size and an answer to my question can resolve once and for all!    Save a jpg file, I say 1000 pixels wide and 100 ppi 10 quality of file.  But if I save the file even to 1000 pixels wide and back to 100 ppi but this time to the quality 5 - What is happening in the file?   I have the same number of pixels in the picture, but what actually makes the quality slider?

  Thank you very much

  Sue

  The size of the image and the JPEG quality are not the same thing.

  Resizing of an image without "resampling" will only change the size of the dimension compared to the size of resolution, but not the size of the overall picture. In other words, you end up with an image low resolution greater or a small image high resolution. But the number of pixels remains the same.  Although pixels can be more or less important, the pixel and data remain the same. However, when you resample an image it affects (based on interpolation methods) actual pixel data.

  When you save a file in JPEG format, you use a lossy compression encoding format (i.e., the lower the setting, the image of several data are removed in favour of a reduced file size). It has really nothing to do with the pixel size, but rather of pixel information. This compression method is based on the algorithms of compression JPEG data, interpolation and pixel. If you do not want to lose any information data and then use the level of highest quality available (12) when you save your files. Or alternatively, save it in a format like TIFF, EPS or PSD lossless. However, at least two formats are generally larger and may not be recognized by applications or PCs. DSP is a proprietary format of Photoshop and although she uses compression methods it is not generally considered lossy.

  The cursor in the JPEG dialog box examines essentially given in pixels and neighbors of pixels when you apply the size of compression rather than pixel (or size).

• Windows7 Desktop only shows black color whenever any substantive theme or Image are selected in the customization

  in my Windows7 Desktop only shows black color whenever any substantive theme or Image are selected in the customization. Plese geve me a solution

  Hi Odette.

  Thanks for posting your query on Microsoft Community forum.

  Question has started happening recently? If YES, did you of significant changes to the computer before this problem?

  The question could arise for various reasons, including corrupted cards, damaged TranscodedWallpaper.jpg file, Remove background images is selected in the Control Panel, etc. To diagnose and troubleshoot these causes of the problem, I suggest you try the steps outlined in the following link and check if the problem persists.

  Impossible to change the background image in Windows 7

  In addition, please refer to the steps provided by Shawn "Cmdr" Keene [MVP] replied on January 6, 2011 in the following thread link: "".

  I am unable to change the background of color United in my windows 7 ultimate

  Additional information:

  Why can't I change my desktop background?

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Interested in the purchase of image # 88739192, pictures are available in the form of psd files?

  Interested in the purchase of image # 88739192, pictures are available in the form of psd files?

  The files are all either .jpg or .ai.

• Black boxes shows images when you set the size of the image?

  Hello

  I have problems with black boxes appear in the image when you set the size. Please look at the screenshots. If his clue, all the problems started after I ran the El Captain update last week. What can I do? Everything works perfectly on my retina new Macbook Pro.

  

  Hi henrike43022551.

  Greetings.

  • This phenomenon occurs with all the files.
  • Also try this
    • Open PS, preferences - performance and uncheck CPU chart use
  • Restart PS and check again.

  ~ Rohit

• How to create images that react to the size of the browser (and not to the device)?

  How to create images that react to the size of the browser (and not to the device)?

  Hello

  Please try this widget.

  http://widgets-musethemes.BusinessCatalyst.com/tb032.html

  Concerning

  Vivek

• How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 in. image

  How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 image open at the same time to work on. I e I can't pass a layer on the image to the other.

  OK - I got out my trusty Photoshop Elements 10 - The Missing Manual and figured it out. What I was trying to describe, it was how to make images with 'tab' images 'floating '? This has somehow reset without my knowledge. What you need to do to get your images 'Floating' back is to click on "EDIT" in your editor - at the bottom of the drop-down list hover your cursor to "GÉNÉRAL" and click on - at the bottom of the drop-down list, click in the bottom left box 'ALLOW FLOATING DOCUMENTS IN FULL EDIT MODE' - and then click OK.

  That solved my problem!

• the textField element formatting dramatically increases the size of my file

  I have a relatively simple form for clients to create the stationery business (visit/comp card slip) for themselves, to then send our printing Department

  It is built as follows:

  Page 1 Instruction, business cards and samples of model sheet, the client fills text fields and a button to save/email

  Page 2 is a sheet A4 10 subforms, a copy of the original card on Page 1

  Page 3 is a sheet A4 3 subforms a copy of the original model on Page 1 sheet

  My 3-page PDF file is 3 MB, with a total of 119 KB of images embedded in the file. During the re-creation from scratch, I noticed that when I edit the textfield object to a specific size, to remove the legend, change font, etc., the size of the file increases. Only a single text field treated as this added an another 400 KB of the size of my file.

  I am following the format of a similar form that has as much information (maybe more), and this file, over 2 pages, total not more than 800 KB. There are several text fields for the customer to add their details.

  Could I have a bug?

  Are there problems of incompatibility or conflict with other software?

  All this experience and found a solution?

  Using LiveCycle Designer (9.0) ARE on Win 7 64-bit. Have you tried a recent update for CS6 (e-Learning suite) who screwed up other parameters of the software and have since removed it (CS6) for now.

  Thank you

  DOM

  It may be the police that you changed in your field. Try to use as little of different fonts as possible. Otherwise, if it's a popular font that you are using you can remove the option of them be incorporated into the form. File > properties > Save Options and uncheck the box embedded fonts.

  Kyle

• Where can I find the size of my file in iPhoto

  Where can I find the size of my file in iPhoto. I want to save my 7000 photos on a flash drive, but don't know what size drive to buy?

  Choose home in the Finder Go menu, double-click the images folder, select the library and choose read information in the file menu.

  The volume that contains the iPhoto library should be in Mac OS Extended format.

  (143187)

• Reduce the size of a file created by "write to waveform.

  Hello

  I'm using labview in 2012 and I have a problem with the size of the tdms file generated by the function "write to waveform. The data is real time 16 channels in a series of X NI USB-6343 and is composed by the gains of the voltage on the y-axis with the absolute time on the x axis (waveform format). The size of the file is reached a Go command within a few hours. Is it possible to reduce the size of this file? All configurations on the component?

  Thanks for the help.

  Best regards

  Marcelo Nobre

  Yes indeed, there is a better way.  Instead of using writing on file express VI measure, try adding the DAQmx logging into your task DAQmx (before starting the task):

  

  This method writes the raw binary data unadjusted to the file (2 bytes per sample because it is a 16-bit data acquisition card) with scaling of information in the header of the file.  In the example you posted, you write the data which are already put across to the file (double 8 bytes for example).  What will make this change you expect to reduce your file size by ~ 4 x.

  If you wish you can compress the files once you have finished writing to them for further reduction of size, but there is no support to achieve so that you are currently writing in the PDM file.  In addition, you will need to unzip the file until you can access the data in the .tdms file.  You can probably get good results with something as simple as the data stored in a .zip file.

  Best regards

• Folder permissions in Windows 7 - a program that creates a file always has the authority to check the size of this file?

  Hello

  Where I work, we have a phone call, saving application that creates records of calls as .wav files.

  Before placing each record in long-term storage, the application creates a copy of the file (which is smaller) MP3 and then made a calculation of the free space to ensure that there is place in the long term for the newly created file storage.

  As part of the application must check the size of the MP3 file that he had just created and - I thought - calculation of space under Windows 7 that determination of the size of the file is sometimes a failure.

  (I think I understand, is that a .net function allows to determine the size of the file.)

  My query...

  If an application has sufficient privileges to create a file in a folder on the drive C: of the PC default also always have the right to determine the size of this file?

  Or are these two completely separate rights?

  For example, is it possible to have with no other rights granted write access?

  Thank you very much.

  The order of the questions, you asked:

  Yes

  Yes

  NO.

  It is indeed possible to give the file 'write' - access to the account, but not 'read' - access. However, even in this case the account can determine the size of the file.

  Log in under the account you are using for the conversion allows you to confirm my answers. To see the size of a file, use Windows Explorer or the Console command "dir".

• Hello, I have a major concern, indeed saving my file, all those who exceed lost in the background becomes white and therefore the size of my file changes. What should I do?

  Hello, I have a major concern, indeed saving my file, all who are lost in the background becomes white and therefore the size of my file change (I said that I have create menu UN pour un client, so he must put this file in a usb key to display it on his TV). What should I do?

  What file format do you export?

  In the case there is the possibility of "Clip for work plan" or "Use the work plan", check that.