Size of the image in relation to the size

Similar Questions

• How to display an image in relation to the path?

  Hi all
  IAM using a trigger to insert after a form to store the path of the image file to a database field.
  This image is not stored in the DB but is present in the path stored
  I want to show this picture in the report of this form.
  
  Then I did the following:
  
  I created a column of formulas and put the path of the image to the record returned as a return value for it.
  Then, I created a placeholder column and put this formula column as return value.
  then I created a field with the source of this placeholder column and (Expand) to the vertical and the horizontal elasticity
  
  But when I run the report of the image does not appear!
  How to solve the problem please?
  
  Thank you

  Hello

  Use the property 'reading a file:

  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_col_read_from_file.htm

  Example 1: Image
  Suppose that for each of your employees, you have a .bmp file that contains a picture of the employee. In your employee table, you have a column called PHOTO that contains the name of the .bmp with the employee photo file.

  To generate a report that shows photos of employees, you select the PHOTO column in your query. In the properties of column for the PHOTO column, read you the value of the file Yes and specify the Image as a File Format. Generator of reports displays the files pointed to by the PHOTO column every time you have referenced the PHOTO column in your layout.

  Note: If the playback of the file is set to no, the file names will be printed instead of the photos.

  Of course, the image must be in a Format supported by reports

  Concerning

• DW not preview images of relative path root

  When the root relative paths are in the placement of the images, DW only mode preview when I saw in a browser (they appear as missing). They work fine when I look at the pages directly on the server, but do not preview. This setting is disabled? And as a side note, what is the best practice here? all my images must be referenced in the document or root relative paths?
  
  Thanks in advance - gift

  Select an excerpt with temporary files in the PREFERENCES. Then, it'll work. In the opposite case
  You cannot preview the links related to root. This isn't a matter of DW. It's a
  base management file thing. The browser has no idea where the root of the
  site is...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "Donok" wrote in message
  News:g24lv7$HD7$1@forums. Macromedia.com...
  > When the root relative paths are in the placement of the images, DW preview
  > them
  > When I saw in a browser (they appear as missing). They work fine
  > when I
  > Look at the pages directly on the server but no preview. Is what setting
  > off?
  > And as a side note, what is the best practice here? expected all my images
  > be
  > referenced as a document or root relative paths?
  >
  > Thanks in advance - gift
  >

• How to make the site root-relative links work in DW and the server?

  See details on buggy behavior DW image link, below. My question is:

  (1) how the site root-relative links work in DW and the server? Or...

  (2) how to reliably automate change of hundreds of links relative to the root of the form

  /images/image.jpg relating to the document?

  In other words, to

  .. /images/image.jpg or

  .. /.. /images/image.jpg or

  .. /.. /.. /images/image.jpg etc... According to the location of the directory.

  The old format (/images/image.jpg ) used to work properly in my previous Setup of DW 8 but appear grey in DW after 'redevelopment' of mac cs5.5 DW. (they look good on the server, but it is difficult to change the image-heavy pages locally when they are all gray).

  I tried to change the files to how DW creates relative links root now:

  /public_html/images/image.jpg, which is a flow of root very easy, attractive, since there is a one-to-one mapping. These look great in DW, but are detailed on the server!

  I looked at the "Advanced" site configuration, and it seemed that it would be possible for the nuke part /public_html/ of my server info... but it also seemed that there was the potential to do damage, modification of these parameters, which are automatically generated from our server connection settings, which seem to work.

  The "links from the document / site root" toggle... did change how DW interprets existing links, or simply change the value by default when you add a link?  I did 80% of the file... before paper links I wondered if relative to the root is not better?

  Of course, it seems less ambiguous for all these pictures if theres a way to make the relative root works for the mode of creation of DW, DW link checking and server.

  Summary of the buggy behavior: (see the test with images here)

  
  

  'old style' link of the root of the site

  /images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: broken (grey w / broken icon)

  Check DW a link: "external link" (i.e., unverifiable, + file might appear orphaned)

  Browser: good

  Ease of switching: n/a (existing format)

  'new style' link site root

  /public_html/images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: good

  Link check in DW: good

  Browser: broken

  Ease of switching: easy

  Link to document

  .. /.. /images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: good

  Link check in DW: good

  Browser: good

  Ease of switching: hard (how to automate)

  Absolute link

  http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: broken (grey w / broken icon)

  Link check in DW: external (i.e., unverifiable, + file might appear orphaned)

  Browser: good

  Ease of switching: n/a... not a real option

  Thank you!

  Similar discussions on ' / '.

  Think of your site definition is set up wrong.  public_html should not be to anywhere in your local site.  It is up to your remote site under the directory root definition.  See screenshot.  In my example, the root directory of the server is htdocs /.  This is where you put public_html

  

  Nancy O.

• When I build any title to a photoshop image, the image is lost by leaving the title Panel

  When I build any title to a photoshop image, the image is lost by leaving the title Panel

  The titration module shows the background image that relates to the position of ICT on the timeline, as you work on the title, but the title itself is an independent image.  You need to position the new track title on a video track above the existing image composite, both together.

• change the image tag to have the applied css3 transition effect

  Hello guys

  I've added a transition effect css3 buttons (room bathroom kitchen mosaic, floor) logo on my homepage http://ceramic-planet2.BusinessCatalyst.com/home

  I wish now to do the same for the small product image so the price past the orange to blue http://ceramic-planet2.BusinessCatalyst.com/bathroom-tiles

  the small product image is tag_smallimage. is it possible to change this tag with css3 rules? If Yes, then it's a matter of how I am able to have 2 different images related to the link small image? for the moment that a single image is related, and I need 2 so that they exchange overview?

  If the change of the tag_smallimage is not the answer can I access each product separately or change the small product.html in dreamweaver to get the effect? again, I can see how it's just a model and each product will have its own set of images?

  difficult, I know

  Dave

  Hi Dave,.

  You must use the custom product field if you need to add another image available to small products. You will find 4 custom inside product details fields and corresponding tags in the layout are {tag_custom1}, {tag_custom2} and so on.

  See you soon,.

  -mario

• Help: Can't see the images in my site DW

  Hello!
  
  My computer died recently, so I had to install Dreamweaver on a new machine. Everything works fine except that I can't see the images in Dreamweaver with absolute addresses (universal) that are hosted on my site.
  
  I can see the images with relative addresses and I can see the images with absolute addresses on other sites.
  
  When I go online and copy the locations of images of images already on my site and paste these addresses in Dreamweaver as a location of the image, all I get is a gray broken image symbol.
  
  When I download a page that contains images (though those I do not now see in Dreamweaver) everything looks a lot online, so I know a problem isn't coding or links.
  
  Any suggestions? Thank you.

  OK... Just to fix it myself...

  In the "Site definition" under "Local news" in the slot "HTTP address", I had written to the address of the site. When I added to this address, my office off the main site directory images began to appear.

• Problem the photographs in an epub file export

  Hello!

  I am creating an ebook of photographic work that has just one photo per page. I use InDesign CC and there I have my image placed in the center of a page of the ipad in size with a small margin around the edge. However, when I export a view on an ipad as an epub, the image appears much smaller and in the corner of the screen of my ipad, not where I wanted to. How can I stop this from happening?

  Hi Kate,.

  This problem of image cut occurs when the size of the image exceeds the maximum size that can support the readers. For example, for iBooks is 600 x 800 pixels; If the image size is going to cut.

  You can try these alternatives:

  1 specify the size of the image as relating to the conduct of text in the EPUB export dialog box options and then export.

  OR

  2. reduce the size of the image in InDesign so that there are 600 x 600 px.

  Let me know if the problem is solved or not.

  Kind regards

  POOJA

• WMP will open the VTS_01_1.VOB and stop at the end of this file

  I don't know if this is the place to post this question, but it's here.

  I created a web page that lists the cover images all my DVDs that I have on an external hard drive and each cover image is related to the first file VTS_01_1.VOB for this DVD.

  I test page to see how it works for each device I have.  The page works perfectly with my tablet from Samsung, the player on the Tablet, I installed automatically go VTS_01_1.VOB, VTS_01_2.VOB and so on until the movie is done.

  If I use my pc Windows 7, WMP will open the VTS_01_1.VOB and stop at the end of this file, how can I get WMP to continue to the next file automatically?

  Personally, I would check the source code of the Web page of the first.

  Paste the full path to the video_ts.ifo file in a new MS Word document and save it as htm.  Then run the file [it should open in your default browser], then right-click on the page and select view source.  Find the link - it should look like

  href ="... / SomeFolder/VIDEO_TS. IFO "> D:\SomeFolder/VIDEO_TS." IFO

  assuming that D:\SomeFolder/video_ts.ifo is the text that is displayed for the link

  Then go to your actual Web page and discover its source to verify that the link contains this model.

  If the solution is not as simple as that, then you will need to post a question in the section Web & networks of this forum I don't know enough about writing for the Web page.

  To increase the chances of getting there help please include a description of what happens when you try to click on the link - rather than 'will not work.

• How to use frames embedded in the flow side-by-side?

  Hello

  I work in a bilingual document with two flow side-by-side and I can't find a way to add an anchored frame that runs through the two columns (to host a graphic example).

  I could manually split the flow after the necessary line and add a frame between them but this document is revised every two months (adding and removing large amounts of text) and it would be time to too demanding.

  Do you have a tip for me?

  The anchored frame will affect only the content of the stream it is poured in. So, if you have a document of two streams, one had placed in a column will never affect the content in the second stream. A graphic image that spans the two columns and has a runaround property brings the text to break around in the two frames. However, the graphics framework is bound to a location on the specific page and is not float with the content changes.

  

  If the content in the two streams is synchronized in space, i.e. each paragraph into two streams begins at the location of base and graphic design is common to both, then you can simply use a framework anchored in each anchored column right or left to create an overlap of 100% and place the image in one of them.

  Alternatively, you can use a graphic image through both flow and create a script that automatically re - positions a graphic image, perhaps related to a single marker in the two streams as the indicator of proximity.

• Plenty of data store: can I remove the complete class and add a new?

  Hi all

  We have a pool that has 4 data warehouses with one having only 15G left. I would like to know if I can delete that one full and add a new lun in the pool of data warehouses. Can I do this?

  I think I can as existing workstations will continue to live and those newly created will be created on the new Lun. I'm just curious if someone did in a live production environment. I looked in the docs but did not find any info on it.

  Kind regards...

  You should not have problems with this.   I think 15 GB free on a data store is really cut close.  Are these complete images or related clones?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Divide the result from a query

  Hello
  
  I want to split/Group (I'm not sure about terms) a result of the query. Suppose I get a query with 50 results. I would like to show only 4 then the next 4 etc.. I have the following code that displays arrows active and inactive.
  I imagine the create a loop around my results of the 4 games and place each of these sets in a DIV. Images of related arrow would then show hide resp. the DIVs.
  
  The code below, I've prepared this day but I can't continue because can not resolve the above question and then find an effective idea of showing each result set.
  
  Someone has a good entry? It would be great!
  
  Thank you very much

  Here is the solution to my problem:
  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?CATID=3&ThreadId=1402501

• produces large images

  When I add a relatedproducts data tag to the great product module, or productlarge.htm, the title and the images for related products are much too large. I need to know exactly where and what code I need to change to change their size. any help would be greatly appreciated. Thank you. example: 1932 Ford car billet aluminum dashboard insert w / Auto meter Arctic White gauges

  Dude, you get Firebug to start then you can see exactly what is the code you want to change.

  His css, currently all of your large text is h3 class div "title". You can target it and change the font size or use other tags in the template

• Flow of text/image for a user manual

  Greetings. I'm working on a layout for a user manual. I encountered a problem with the flow of text and images in many cases where the instructions of the manual to a step by step format. Please see the screenshot at the end of the post.

  You will see in the bottom half of the page one of these sequences step by step starts. The 1st image is related to step 1 and 2 in step 2. I want the image to align with the capline of the 1st sentence at each stage and the image must stay in line on the right and the left-aligned text. Here's where I have problems: I don't want to give a space - after replacing every step in order to align the next step with the next image.

  I tried to put the image inline with the text and by aligning his right of paragraph but then I can't align the image with the capline of the 1st sentence in step; the image is before or after the line of text. I also tried dressing jump object, but which becomes immediately problematic when a stage has several lines of text.

  What is the best practice here? I think I lack something real simple. Also, if it's important I have an author on InCopy assignments of edition we're going.

  

  Try following:

  

  You need:

  • 2 paragraph styles
  • 1 object model for image
  1. Specify a paragraph for the numbered list Style as stated above. (But it can be any other model also) I call it 'the list '.
  2. Specify where the image is embedded in a paragraph Style. I call it 'Anchor Image'
     1. Left, the intention is wide the first character to be so far to the right, that this is in the area of the image, would make so vast that it is near the right edge, for example if the frame is 200 mm, you can do left intend 198 mm
     2. The size is not serious, in the example, it is 0.1pt, 0, driving, before 0space and after.
     3. Keep options: Keep with 10 lines (or whatever the number is useful.)
     4. Insert the frame anchored in this paragraph
  3. The style of the object must have following properties:
     1. Text wrapping, I did it with 1 p to the left and to the right, 0mm above and below the rectangle shape
     2. Anchored the position of the image: right 0mm to the right vertical edge, specify a distance between the upper edge of the frame on the insertion will be always to the desired line at the top of the page of the reference.

  The wrapping of the text of the framework will force the number text (with the style of paragraph 'List' of the film, but also the next holder of the anchor with the paragraph style 'Anchor Image' to wrap.) Because the left for the anchoring of the Image style of paragraph is far to the right it will require to start after the space of the image below. Because the font sizes of this paragraph are so small, it will not appear, and you can specify the minimum vertical distance between a number o the previous image with text list encapsulate parameters, you might get closer with negative after space. As an anchor image contains no text, it is not a problem.

• Dynamic resizing of a sprite (image hotspot)

  Hello
  
  I have a question about scale dynamically a sprite. I have an application that displays a picture on the screen, and on top of that image, I draw dynamically semi-transparent sprite who act as hot spots for the image under.
  
  I can't understand how to evolve hotspots in proportion to the part of the image that the scales located below. Hotspots extend UIComponent (so I can communicate with them) and they contain a sprite that is the Visual hotspot on the screen (which is good).
  
  The image below is a simple Image. When I resize the image (resizing the window), I would like for the hotspots to stay where they are related to the image.
  
  I tried to create another component, which extends the class Image that attracts all the hot spots and then tried to put it on the top of the image (understand I could put the content of true as the image scale), but had the same results (hot spots were fired, but did not react to the resizing whatsoever).
  
  Should I use the Bitmap class to draw hotspots instead? I have no idea at this point. I'm puzzled. Any guidance would be appreciated. May I approach the evil of all this, I don't know at this point. I hope I explained the problem well enough to get some kind of feedback.
  
  Thank you very much for your time.

  Hi Amy,

  I thought about it. I kept pounding on your idea of using a canvas on the scale the UIComponents as a group, but it did not work because I have been scaling the canvas based on the properties of the image (the under Layer) that were not resolved (I tried to recover after Event.ADDED_TO_STAGE).

  The solution was to wait for the Event.RENDER shot and then get the dimensions of the image loaded, to understand what is the percentage of the size that the resized image of the original image and then just scale the canvas above this one session to match. Sprinkle in a listener for Event.RESIZE and boom, it works like a champ.

  This method works better than I expected because now it doesn't matter what size of the original image is relative to its container (larger or smaller), it will scale itself and all its layers (layer of canvas) together.

  It seems that several times I'm looking for the right place for my solution (in the API), just at the wrong time (usually too early, before the properties I'm looking are defined).

  Thank you very much for putting me on the right track.

  The f