Police Error (?)
I use Photoshop CS5 Photoshop CC.
I use it often for the edition of comic strip.
But sometimes, when I click on the bubble to type text, the font size I used (which is usually 16) could not work.
So I have to increase the font size maximum (1296) to type.
Please help me! =((
This can occur if the size of the Document is too much
- Check if you use the right (Pixels, Cm, mm) Dimensions (as shown in the image below)
If this was not the case, then
- Reset the character panel to its default value (as shown in the image below)
- Reset the Photoshop preferences file (Edit-> preferences-> general: reset preferences on Quit)
Hope this is useful
Tags: Photoshop
Similar Questions
-
Why I get a police error when I export my site in HTML.
Why I get a police error when I export my site in HTML. I use typekit web fonts in the Muse? I am currently using only 2 typekit fonts in my design. Is there something that I am missing? Help, please.
Hi Stacey,
mac_heibu and Peter refer to a limitation of the export as HTML stream where you're not able to preview the fonts web Typekit exported locally because they are configured only with the URL of the site you specify in the export dialog box. Assuming that you are not running in any error export, is not not able to preview the exported local content is not a matter of concern as Typekit web fonts should work when you download content from the site to your FTP host.
However, the error you mentioned is a problem that won't be solved itself when you download to your host.
Please see my response to mrbenoit2 above and get back to me, if you still see the error.
Abhishek
-
Failed to retrieve the embedded police error
Hello world
When you open a pdf file, I get the following error:
Impossible to extract embedded police "QGCXJE + HelveticaNeueLT-Roman". Some characters may not display or print correctly.
Anyone know what this means and this will affect printing when I send it to a printer?
Thanks for any help.
As long as it appears correctly, there should be no problem with printing. This is just a warning that apparently something was wrong in an embedded font and the result may not be as expected.
-
After effects CC 2015.3 multiple errors
I can't believe that there are no live (Chat or phone) for all the money I give to Adobe CC. This is unacceptable!
I get several error messages whenever I try to open a project in Ae. The police errors. Hide errors. Errors, I don't know what they are.
There are too many errors for the screenshot and download.
I have a computer Dell brand new and CC Adobe Ae 2015.3. I am new to Adobe CC. I have ALL the CC apps.
CENTRAL PROCESSING UNIT
Intel Core i7 6700
Hearts 4
Thread 8
Processor Intel Core i7 6700 name
Skylake code name
Package Socket LGA of 1151
14nm technology
Specification Intel Core i7-6700 CPU @ 3.40 GHz
Family 6
Extended family 6
Model E
5th expanded model
3 step by step
Revision R0
Instructions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64, NX, VMX, AES, AVX, AVX2 FMA3
Virtualization made supported, disabled
Hyperthreading is supported, enabled
Bus speed 99.7 MHz
Stock of basic speed 3400 MHz
Stock of 100 MHz Bus speed
Average temperature of 27 ° c.
Caches
L1 Data Cache size 4 x 32 KBytes
L1 Instructions Cache size 4 x 32 KBytes
L2 unified Cache size 4 x 256 KB
L3 unified Cache size 8192 KB
Carrots
Basic multiplier speed Bus speed temperature Threads
0 x 8,0 MHz 797,3 99.7 MHz 27 c ° base APIC ID: 0, 1
Core 1 797,3 MHz x 8.0 99.7 MHz 27 c ° APIC ID: 2, 3
Core 2 797,3 MHz x 8.0 99.7 MHz 26 ° APIC ID: 4, 5
3 x 8,0 MHz 797,3 99.7 MHz 27 c ° APIC ID of the base: 6, 7
Graphics
Monitor
DELL NVIDIA GeForce gt 730 S2415H name
Course resolution 1920 x 1080 pixels
Work the resolution 1920 x 1040 pixels
The active, primary State
1920 screen width
Monitor height 1080
Monitor the BPP 32 bits per pixel
Monitoring frequency 60 Hz
Device \\.\DISPLAY1\Monitor0
NVIDIA GeForce GT 730
Manufacturer NVIDIA
GeForce GT 730 model
Deviceid 10DE-1287
Revision A2
Subprovider Dell (1028)
Output current level 1
GPU current 405 MHz clock
Memory current 405 MHz clock
Current Shader clock 405 MHz
Voltage v 1.025
Bus interface PCI Express x 8
Temperature of 29 ° c.
21.21.13.7270 driver version
The BIOS version 80.28.8e.00.04
2047 MB physical memory
Virtual memory 2048 MB
Number of performance levels: 2
Level 1 - "2D Desktop.
GPU clock 405 MHz
405 MHz Shader clock
Level 2 - "3D Applications.
GPU clock MHz 653
900 MHz Shader clock
Now that I'm locked in Adobe CC with their contract, I can not uninstall and throw it in the trash, unless I want to pay for the cancelled subscription rate.
Anyone has any idea what I can do to fix this?
I bought and downloaded two projects After the Envato market Effects that have been tested and approved by Envato and used by hundreds of
users with no reported similar problems.
Thanks for any help members of the forum since Adobe seems not to be available to their paying customers.
Will be
I can't believe that there are no live (Chat or phone) for all the money I give to Adobe CC. This is unacceptable!
There are. I did it several times. Contact the customer service . Once you have finished toggle menus, you will have a window saying "needs help".
I get several error messages whenever I try to open a project in Ae. The police errors. Hide errors. Errors, I don't know what they are.
There are too many errors for the screenshot and download.
Be more specific. display error messages (screenshots). If it's that bad - don't try to contact support.
-
Hello
I have a table in which I will be storing an XMLTYPE column based on an XML schema. I use the following version of the database:
Now, when I run my test InPlace Schema Evolution, I get the following error message:SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 23 18:20:12 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options
< font color = "red" >
< / make >ORA-31166: internal error code to handle ignorable attributes
I built a re-producable case of test for the purpose of this post on the forum. For starters, I have a database scheme grants the following privileges:
All other scripts are run as the database schema. For the purposes of clarity, let's call the {*} TEST_DB_SCHEMA {*}. I follow the steps below in this scheme:DIRECTLY GRANTED SYSTEM PRIVS ============================= CREATE TRIGGER ALTER SESSION CREATE TABLE EXECUTE PRIVS (SYS-OWNED PACKAGES) ============= EXECUTE ON DBMS_XMLSCHEMA ROLES GRANTED ============= CONNECT DATA_ROLE DATA_ROLE DDL ============= create role DATA_ROLE not identified; grant create database link to DATA_ROLE; GRANT CREATE MATERIALIZED VIEW TO DATA_ROLE; grant create procedure to DATA_ROLE; grant create sequence to DATA_ROLE; GRANT CREATE SYNONYM TO DATA_ROLE; grant create table to DATA_ROLE with admin option; grant create trigger to DATA_ROLE; grant create view to DATA_ROLE; grant select any dictionary to DATA_ROLE;
H3. 1. run this PL/SQL script to record the Version 1 of my XML schema:
H3. 2. create a bunch of Table with an XMLTYPE column based on version 1 of my XML schema:PROMPT -------------------------------; PROMPT INITIAL XML SCHEMA REGISTRATION; PROMPT -------------------------------; SET SERVEROUTPUT ON SET FEEDBACK OFF DECLARE l_xsd_url_con CONSTANT VARCHAR2(60) := 'http://home/xsd/test_binXML_v1.xsd'; l_xml_schema VARCHAR2(32767); E_XSD_ALREADY_REGISTERED EXCEPTION; PRAGMA EXCEPTION_INIT(E_XSD_ALREADY_REGISTERED, -31085); BEGIN l_xml_schema := '<xs:schema'||CHR(10)|| 'xmlns:xs="http://www.w3.org/2001/XMLSchema"'||CHR(10)|| 'xmlns:xdb="http://xmlns.oracle.com/xdb"'||CHR(10)|| 'version="1.0"'||CHR(10)|| 'xdb:storeVarrayAsTable = "true">'||CHR(10)|| ' <xs:element name="TransactionBatch" type="TransactionBatchType" xdb:defaultTable="XSD_TEST_BATCH_BINXML1"/>'||CHR(10)|| ' <xs:complexType name="TransactionBatchType">'||CHR(10)|| ' <xs:sequence>'||CHR(10)|| ' <xs:element name="Transaction" type="TransactionType" minOccurs="1" maxOccurs="unbounded" xdb:defaultTable="XSD_TEST_TRANSACTION_BINXML1"/>'||CHR(10)|| ' </xs:sequence>'||CHR(10)|| ' </xs:complexType>'||CHR(10)|| ' <xs:complexType name="TransactionType">'||CHR(10)|| ' <xs:sequence>'||CHR(10)|| ' <xs:element name="Portal" type="PortalType" minOccurs="1" maxOccurs="1" />'||CHR(10)|| ' <xs:element name="CustomerId" type="CustomerIdType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="TransactionQuantity" type="TransactionQuantityType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="AppTransactionId" type="AppTransactionIdType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="TransactionDetails" type="TransactionDetailType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="Username" type="UsernameType" minOccurs="1" maxOccurs="1" />'||CHR(10)|| ' </xs:sequence>'||CHR(10)|| ' </xs:complexType>'||CHR(10)|| ' <xs:simpleType name="PortalType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' <xs:maxLength value="30"/>'||CHR(10)|| ' <xs:enumeration value="TEST1"/>'||CHR(10)|| ' <xs:enumeration value="TEST2"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| ' </xs:simpleType>'||CHR(10)|| ' <xs:simpleType name="CustomerIdType">'||CHR(10)|| ' <xs:restriction base="xs:string"/>'||CHR(10)|| ' </xs:simpleType>'||CHR(10)|| ' <xs:simpleType name="TransactionQuantityType">'||CHR(10)|| ' <xs:restriction base="xs:integer">'||CHR(10)|| ' <xs:minExclusive value="0"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| ' </xs:simpleType>'||CHR(10)|| ' <xs:simpleType name="AppTransactionIdType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' <xs:maxLength value="20"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| ' </xs:simpleType>'||CHR(10)|| ' <xs:simpleType name="TransactionDetailType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| ' </xs:simpleType>'||CHR(10)|| ' <xs:simpleType name="UsernameType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' <xs:maxLength value="30"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| ' </xs:simpleType>'||CHR(10)|| '</xs:schema>'; DBMS_XMLSCHEMA.REGISTERSCHEMA( schemaurl => l_xsd_url_con, schemadoc => l_xml_schema, local => TRUE, -- XSD must only be visible to the Owner DB Schema in which this script is run. genTypes => FALSE, -- Don't want to generate object types, as we're using Binary XML. force => FALSE, -- Raise all errors on creation owner => USER, -- XML Schema will belong to the currently executing user. options => DBMS_XMLSCHEMA.REGISTER_BINARYXML -- We wish to register the XSD as Binary XML. ); EXCEPTION WHEN E_XSD_ALREADY_REGISTERED THEN DBMS_OUTPUT.PUT_LINE('XML Schema '||l_xsd_url_con||' is already registered.'); END; / SET FEEDBACK ON
H3. 3. fill this table with the test data.PROMPT ----------------------; PROMPT ONE-OFF DDL STATEMENTS; PROMPT ----------------------; DROP TABLE test_batch; DROP SEQUENCE seq_test_batch_id; CREATE TABLE test_batch ( batch_id NUMBER(20), batch_timestamp TIMESTAMP DEFAULT SYSTIMESTAMP, batch_xml XMLTYPE, CONSTRAINT tbh_batch_id_nn CHECK(batch_id IS NOT NULL), CONSTRAINT tbh_batch_timestamp_nn CHECK(batch_timestamp IS NOT NULL), CONSTRAINT tbh_batch_xml_nn CHECK(batch_xml IS NOT NULL) ) XMLTYPE COLUMN batch_xml STORE AS SECUREFILE BINARY XML XMLSCHEMA "http://home/xsd/test_binXML_v1.xsd" ELEMENT "TransactionBatch" PARTITION BY RANGE(batch_timestamp) INTERVAL (NUMTOYMINTERVAL(1, 'MONTH')) ( PARTITION P_TEST_BATCH_201208 VALUES LESS THAN (TO_DATE('01-SEP-2012', 'DD-MON-YYYY')) TABLESPACE &&TABLSPACE_OF_YOUR_CHOICE ); CREATE UNIQUE INDEX idx_tbh_batch_id ON test_batch(batch_id) TABLESPACE TXTREME_IDX_XLG; ALTER TABLE test_batch ADD CONSTRAINT tbh_batch_id_pk PRIMARY KEY (batch_id) USING INDEX idx_tbh_batch_id; CREATE SEQUENCE seq_test_batch_id START WITH 1 INCREMENT BY 1 MAXVALUE 99999999999999999999 CYCLE NOCACHE NOORDER;
H3. 4. save the Version 2 of my XML schemaPROMPT --------------------------; PROMPT CREATING INITIAL TEST DATA; PROMPT --------------------------; TRUNCATE TABLE TEST_BATCH; SET TIMING ON DECLARE l_batch_count_con CONSTANT NUMBER(4) := 200; l_transaction_count PLS_INTEGER; l_total_transactions PLS_INTEGER DEFAULT 0; l_transaction_xmlclob CLOB; l_transaction_xmldoc XMLTYPE; BEGIN FOR idx IN 1..l_batch_count_con LOOP l_transaction_count := TRUNC(DBMS_RANDOM.VALUE(1,100)); -- Initialise XML CLOB String. l_transaction_xmlclob := '<?xml version="1.0"?>'||CHR(10)||'<TransactionBatch>'; -- Insert the contents of the XML CLOB String. FOR idx IN 1 .. l_transaction_count LOOP l_transaction_xmlclob := l_transaction_xmlclob||CHR(10)|| ' <Transaction>'||CHR(10)|| ' <Portal>TEST1</Portal>'||CHR(10)|| ' <CustomerId>1234567891</CustomerId>'||CHR(10)|| ' <TransactionQuantity>4</TransactionQuantity>'||CHR(10)|| ' <AppTransactionId>1232K89C</AppTransactionId>'||CHR(10)|| ' <TransactionDetails>This is another long free text field</TransactionDetails>'|| ' <Username>Jimbo2</Username>'||CHR(10)|| ' </Transaction>'; END LOOP; --Terminate XML CLOB String. l_transaction_xmlclob := l_transaction_xmlclob||CHR(10)||'</TransactionBatch>'; -- Create XMLTYPE XML Document. l_transaction_xmldoc := XMLTYPE.createXML(l_transaction_xmlclob); -- Populate the TEST_BATCH Table. INSERT INTO test_batch ( batch_id, batch_timestamp, batch_xml ) VALUES ( SEQ_TEST_BATCH_ID.NEXTVAL, SYSTIMESTAMP, l_transaction_xmldoc ); l_total_transactions := l_total_transactions + l_transaction_count; END LOOP; DBMS_OUTPUT.PUT_LINE('Inserted a total of '||l_total_transactions||' transaction XML pieces across '||l_batch_count_con||' Test Batches.'); COMMIT; DBMS_OUTPUT.PUT_LINE('Commit complete.'); END; / SET TIMING OFF
H3. 5 test to insert a new XML document in line with the second XML schema. This test fails as expected.PROMPT -----------------------------------------------------------------------------------; PROMPT NEW XML SCHEMA REGISTRATION - IDENTICAL TO OLD SCHEMA EXCEPT FOR NEW <Test> ELEMENT; PROMPT -----------------------------------------------------------------------------------; SET FEEDBACK OFF DECLARE l_xsd_url_con CONSTANT VARCHAR2(60) := 'http://home/xsd/test_binXML_v2.xsd'; l_xml_schema VARCHAR2(32767); E_XSD_ALREADY_REGISTERED EXCEPTION; PRAGMA EXCEPTION_INIT(E_XSD_ALREADY_REGISTERED, -31085); BEGIN l_xml_schema := '<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" version="1.0" xdb:storeVarrayAsTable="true">'||CHR(10)|| '<xs:element name="TransactionBatch" type="TransactionBatchType" xdb:defaultTable="XSD_TEST_BATCH_BINXML2"/>'||CHR(10)|| '<xs:complexType name="TransactionBatchType">'||CHR(10)|| ' <xs:sequence>'||CHR(10)|| ' <xs:element name="Transaction" type="TransactionType" minOccurs="1" maxOccurs="unbounded" xdb:defaultTable="XSD_TEST_TRANSACTION_BINXML2"/>'||CHR(10)|| ' </xs:sequence>'||CHR(10)|| '</xs:complexType>'||CHR(10)|| '<xs:complexType name="TransactionType">'||CHR(10)|| ' <xs:sequence>'||CHR(10)|| ' <xs:element name="Portal" type="PortalType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="CustomerId" type="CustomerIdType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="TransactionQuantity" type="TransactionQuantityType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="AppTransactionId" type="AppTransactionIdType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="TransactionDetails" type="TransactionDetailType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="Username" type="UsernameType" minOccurs="1" maxOccurs="1"/>'||CHR(10)|| ' <xs:element name="Test" type="TestType" minOccurs="0" maxOccurs="1"/>'||CHR(10)|| ' </xs:sequence>'||CHR(10)|| '</xs:complexType>'||CHR(10)|| '<xs:simpleType name="PortalType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' <xs:maxLength value="30"/>'||CHR(10)|| ' <xs:enumeration value="TEST1"/>'||CHR(10)|| ' <xs:enumeration value="TEST2"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| '</xs:simpleType>'||CHR(10)|| '<xs:simpleType name="CustomerIdType">'||CHR(10)|| ' <xs:restriction base="xs:string"/>'||CHR(10)|| '</xs:simpleType>'||CHR(10)|| '<xs:simpleType name="TransactionQuantityType">'||CHR(10)|| ' <xs:restriction base="xs:integer">'||CHR(10)|| ' <xs:minExclusive value="0"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| '</xs:simpleType>'||CHR(10)|| '<xs:simpleType name="AppTransactionIdType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' <xs:maxLength value="20"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| '</xs:simpleType>'||CHR(10)|| '<xs:simpleType name="TransactionDetailType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| '</xs:simpleType>'||CHR(10)|| '<xs:simpleType name="UsernameType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' <xs:maxLength value="30"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| '</xs:simpleType>'||CHR(10)|| '<xs:simpleType name="TestType">'||CHR(10)|| ' <xs:restriction base="xs:string">'||CHR(10)|| ' <xs:minLength value="1"/>'||CHR(10)|| ' <xs:maxLength value="30"/>'||CHR(10)|| ' </xs:restriction>'||CHR(10)|| '</xs:simpleType>'||CHR(10)|| '</xs:schema>'; DBMS_XMLSCHEMA.REGISTERSCHEMA( schemaurl => l_xsd_url_con, schemadoc => l_xml_schema, local => TRUE, -- XSD must only be visible to the Owner DB Schema in which this script is run. genTypes => FALSE, -- Don't want to generate object types, as we're using Binary XML. force => FALSE, -- Raise all errors on creation owner => USER, -- XML Schema will belong to the currently executing user. options => DBMS_XMLSCHEMA.REGISTER_BINARYXML -- We wish to register the XSD as Binary XML. ); EXCEPTION WHEN E_XSD_ALREADY_REGISTERED THEN DBMS_OUTPUT.PUT_LINE('XML Schema '||l_xsd_url_con||' is already registered.'); END; / SET FEEDBACK ON
H3. 6. try Inplace development of Version 1 of the XML schema in Version 2.PROMPT ---------------------------------------------------------------; PROMPT ATTEMPT TO INSERT V2 XSD-COMPLIANT XMLDOC INTO TEST_BATCH TABLE; PROMPT ---------------------------------------------------------------; DECLARE l_transaction_xmldoc XMLTYPE; E_XSD_VALIDATION_FAILURE EXCEPTION; PRAGMA EXCEPTION_INIT(E_XSD_VALIDATION_FAILURE, -31061); BEGIN l_transaction_xmldoc := XMLTYPE.createXML( '<?xml version="1.0" encoding="UTF-8"?>'||CHR(10)|| '<TransactionBatch>'||CHR(10)|| ' <Transaction>'||CHR(10)|| ' <Portal>CARMAN</Portal>'||CHR(10)|| ' <CustomerId>1234567891</CustomerId>'||CHR(10)|| ' <TransactionQuantity>4</TransactionQuantity>'||CHR(10)|| ' <AppTransactionId>1232K89C</AppTransactionId>'||CHR(10)|| ' <TransactionDetails>This is a long free text field</TransactionDetails>'||CHR(10)|| ' <Username>Jimbo2</Username>'||CHR(10)|| ' <Test>This is an In-Place Schema Evolution Test</Test>'||CHR(10)|| ' </Transaction>'||CHR(10)|| '</TransactionBatch>' ); -- Attempt to populate the SUBMISSION_BATCH Table. INSERT INTO submission_batch ( batch_id, batch_timestamp, batch_xml ) VALUES ( SEQ_SUB_BATCH_ID.NEXTVAL, SYSTIMESTAMP, l_transaction_xmldoc ); DBMS_OUTPUT.PUT_LINE(SQL%ROWCOUNT||' row inserted.'); COMMIT; DBMS_OUTPUT.PUT_LINE('Commit complete.'); EXCEPTION WHEN E_XSD_VALIDATION_FAILURE THEN DBMS_OUTPUT.PUT_LINE('Insert failed as expected.'||CHR(10)); DBMS_OUTPUT.PUT_LINE(SQLERRM); END; /
H3. The scripts above provide the following Test output:PROMPT --------------------------------------------------------------------------------------; PROMPT PERFORM IN-PLACE EVOLUTION AND DE-REGISTER/PURGE OLD SCHEMA IF EVOLUTION IS SUCCESSFUL; PROMPT --------------------------------------------------------------------------------------; SET TIMING ON DECLARE l_current_schema XMLTYPE; l_new_schema XMLTYPE; l_xsd_differences XMLTYPE; l_resource BOOLEAN; BEGIN SELECT schema INTO l_current_schema FROM user_xml_schemas WHERE schema_url = 'http://home/xsd/test_binXML_v1.xsd'; SELECT schema INTO l_new_schema FROM user_xml_schemas WHERE schema_url = 'http://home/xsd/test_binXML_v2.xsd'; SELECT XMLDIFF(l_current_schema, l_new_schema) INTO l_xsd_differences FROM dual; DBMS_OUTPUT.PUT_LINE('Successfully extrapolated XDIFF XML Document.'); DBMS_XMLSCHEMA.inPlaceEvolve( 'http://home/xsd/test_binXML_v1.xsd', l_xsd_differences, DBMS_XMLSCHEMA.INPLACE_TRACE ); DBMS_OUTPUT.PUT_LINE('Successfully evolved original XML Schema.'); EXCEPTION WHEN OTHERS THEN ROLLBACK; DBMS_OUTPUT.PUT_LINE('Error issued during InPlace XML Schema Evolution:'); DBMS_OUTPUT.PUT_LINE(SQLERRM); END; /
NOTE: When I ran the above tests, I had already created the test of XML schemas. That's why the output messages, say...Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 Connected as TEST_DB_SCHEMA@dbs02local SQL> ------------------------------- INITIAL XML SCHEMA REGISTRATION ------------------------------- XML Schema http://home/xsd/test_binXML_v1.xsd is already registered. Executed in 0 seconds ---------------------- ONE-OFF DDL STATEMENTS ---------------------- Table created Executed in 0.016 seconds Index created Executed in 0.016 seconds Table altered Executed in 0 seconds Sequence created Executed in 0 seconds -------------------------- CREATING INITIAL TEST DATA -------------------------- Table truncated Executed in 0.032 seconds Inserted a total of 10259 transaction XML pieces across 200 Test Batches. Commit complete. PL/SQL procedure successfully completed Executed in 8.487 seconds ----------------------------------------------------------------------------------- NEW XML SCHEMA REGISTRATION - IDENTICAL TO OLD SCHEMA EXCEPT FOR NEW <Test> ELEMENT ----------------------------------------------------------------------------------- XML Schema http://home/xsd/test_binXML_v2.xsd is already registered. --------------------------------------------------------------- ATTEMPT TO INSERT V2 XSD-COMPLIANT XMLDOC INTO TEST_BATCH TABLE --------------------------------------------------------------- Insert failed as expected. ORA-31061: XDB error: XML event error ORA-19202: Error occurred in XML processing LSX-00213: only 0 occurrences of particle "Transaction", minimum is 1 PL/SQL procedure successfully completed -------------------------------------------------------------------------------------- PERFORM IN-PLACE EVOLUTION AND DE-REGISTER/PURGE OLD SCHEMA IF EVOLUTION IS SUCCESSFUL -------------------------------------------------------------------------------------- Successfully extrapolated XDIFF XML Document. Error issued during InPlace XML Schema Evolution: ORA-31166: internal error code to handle ignorable attributes PL/SQL procedure successfully completed Executed in 0.046 seconds SQL>
H4. Now, as it is the first time I've ever tried evolution of XML schema in Oracle XMLDB, is there someone who could potentially open the door please, re. solve the < font color = "red" >ORA-31166< / police > error?Hello
First of all, thank you for your efforts on the provision of a decent test case.
However, there are a few inconsistencies:
-Step 5 attempts to insert into SUBMISSION_BATCH, but the table created above is TEST_BATCH
-Same for the sequence nameNow back to the real question...
I think the problem comes because you run XMLDiff against two versions saved of your drawings.
When Oracle stores a schema, it adds a large number of attributes for internal use (you can see them by querying USER_XML_SCHEMAS. DIAGRAM) but we as end users don't have to worry about them.
However, by building the Xdiff document based on these two 'internal' versions, we explicitly say Oracle whose internal attributes must be changed during the evolution of the scheme, leading to potential conflicts.A few other comments:
-Given that you're using the binary XML schema, you must also set "genTables-online false" and more "genTypes-online false."
-Also delete all annotations from xdb:defaultTable and xdb:storeVarrayAsTable on the diagrams, they are of no use in this situation.
-Do not save the schema of the v2, it is not necessary. Just use a transient instance when calling XMLDiffSo, to summarize:
-XMLDiff run against both original patterns (do not save a new in any case, the process of evolution will take care of replacing the old).
-of course, don't forget to change the INPLACE_TRACE to INPLACE_EVOLVE when ready :)Hope that helps.
Published by: odie_63 on August 23, 2012 16:31 - fixed some typos
-
F16, F17, F2 etc fonts "missing."
Help, please! I'm composition orginated in Latex and Word tricks and have problems with ligatures and characters not displaying and give me the cross-pink box. When determining the file, I am out of the police errors that are not displayed in the preflight or where to find the fonts in the document. These fonts are called: F16, F18, F43, F17, F2. What is the problem? How to solve this?
Maybe you used different fonts for extended characters. InDesign can work with OTF, you need to use. Better would be to use a Pro, which includes the characters of that language. InDesign comes with a lot of extended fonts, such as Minion Pro and Myriad Pro.
Not every font includes these characters, but if these characters in a font, InDesign works very well:
I strongly recommend NOT to use Apple system fonts as you did today.
-
ORA-28132: the MERGE syntax IN does not support security policy
Hello
With the help of Oracle 11 g R2.
I have the following problem:
If the user attempts to perform a MERGE INTO statement on a table (T1), it receives the error ORA-28132: The MERGE IN syntax does not support security policy.
Is there a way I can solve this problem by giving the user more rights on this specific table, T1? Or I need to rewrite the SQL code using UPDATE and INSERT instead MERGER?
I can't grant POLICE ACCESS TAX-FREE, it would be too powerful privilege...
Please advise,
M.R.
You may need to recreate the political VPD:
Note:
In previous versions of Oracle database, when you created a strategy Oracle virtual private database on an application that included the
MERGE
INTO
statement, theMERGE
INTO
declaration could be avoided with aORA-28132: Merge into syntax does not support security policies
error, due to the presence of the virtual private database policy. From Oracle Database 11 g Release 2 (11.2.0.2), you can create policies on applications that includeMERGE
INTO
operations. To do this, in theDBMS_RLS
.ADD_POLICY
statement_types
parameter, include theINSERT
,UPDATE
, andDELETE
statements, or simply omitstatement_types
setting altogether. Refer to the Oracle Database Security Guide for more information on the application of the strategies on specific types of SQL statement. -
Question of crazy fonts record book as PDF (standard setting in Distiller)
I tried to find a number of crazy police all day when exporting my book in PDF format.
When I opened FrameMaker, I see the following error message every time:
I also see lack of police errors in the Console of FrameMaker:
And framemaker files are not lacking of fonts:
This is the output that I see when I discovered the PDF:
Please help, as this turns on the ground.
Thank you
Nathan
Looks like you used the printer fonts.
FM, you need to set your default printer to the AdobePDF printer instance (get utility freebie for the Sundorne SetPrint for this).
-
I am the administrator of the account and only one user on this HP desktop computer.
Try to uninstall a program and receive message error which reads «system administrator has set policies to prevent this installation»
I am the only user and shown as an administrator on the computer system.
To get beyond this issue any help would be greatly appreciated! Help, please be detailed in your request.
Thanks in advance everybody!
Hello emc8
Try to use the Microsoft FixIt tool to uninstall applications. Microsoft FixIt can help when programs do not want to install or uninstall.
1. download from the link below and run it. (Note for each program, you will need to rerun the Microsoft FixIt tool)
2. asked about if you want to choose options or run automatically, choose "automatically".
3. the next thing he'll ask is if the problem you are having with the install or uninstall. Select uninstall.
4 Microsoft FixIt will then list all the programs currently installed, and you can select the one you want to uninstall. Start with what ever you prefer.
5. it should then proceed to uninstall the program. If you get the same message of error or an other error message / let me know.
Microsoft FixIt toolAlso to give congratulations just click the White Star in the purple box on the lower left corner of a post.
-
Application wide error division by 0 installation police quest game
Hello
My OS is Vista.I am trying to install an older game (Police Quest) and the listed top application error is displayed during installation. It will be
Don't let me install the game. I'm doing something wrong? Thanks for any help.
Hi 2cul4scul,
What version of the game Police Quest you trying to install?
This problem can occur if the game is not compatible with Windows Vista
Step 1: First, check to see if the game is compatible with Windows Vista for your version of the game
Windows Vista Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/
Step 2: You can install the game in compatibility mode
Follow the steps mentioned in the link below
Make older programs in this windows version
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: why not my Windows XP SP3 machine allows installation of any product from google?
I am running Windows XP SP3 and what-so-ever did not want to upgrade to Vista or Win7.
Now I try to install google earth, what is happening is the setup.exe for downloading google earth data, but will not perform the installation process.I get an error message saying that "the installation failed, try again."So I asked google if he could understand that out and they were no help, so I decided to use the administrator account on my computer to install it, what was interesting on this topic (and disturbing) was that after running the same setup.exe file, a different error came up saying that "your system administrator set policies against installing this program" (or something like that)now, I checked everything in "Political system" under administrative options, but still no help.Can someone help me please?Derek "Rick."Well, it seems that the program has been installed, it was not recognized as a program in one of the directories, I have just fallen on the directory with the program Google earth work. The directory was hidden in the ~ temp file deep inside the C:\ drive
-
I get the error message on my Windows XP pc
"ialmrnt5 display driver stopped working properly" my police doing real big and I have to restart my PCHow can I solve this problem?
What do you do when this happens?
You can try to find an updated driver and then update your driver to determine if it solves your problem.
Take a look at this article by Intel: http://www.intel.com/support/graphics/sb/CS-009483.htm
-
Hi, I am trying to install the Steam (http://store.steampowered.com/about/) software, and I can't seem to. The steam program is an .msi file, and unlike the programs .exe, when I click right there is no option to 'run as administrator '.
According to the instructions I connected as the 'administrator' on my computer (it's one PC at home to the unique user ID is the ID of the admin), but every time I try to install it it stops with this message: "the system administrator has set policies to prevent this installation. I am running Vista.
I tried Googling this issue, there seems to be a common problem for some, however, it doesn't seem to be a single solution (which does not require a degree in rocket science). I'm quite honestly only a basic computer user (I say this so you don't expect me to know how to get into the registry or anything exotic like that), so if you could help with instructions on how to fix this it would be much appreciated.
By suggestion of Steam, I have updated my Microsoft Installer (4.5). This did not help.
Thank you very much.
Ah, I did it - did not work. The error message is actually a bit of a herring - turns out he can appear for a variety of reasons.
Turns out that my gut wasn't about it being a registry problem... the MS Visual C++ 2005 Redistributable entries had broken somehow, preventing the installation of all instances of the same Windows install. Of course, most installers begin with MSVC Redist installation, that's why they were all fail. Fortunately, I didn't have to change the registry manually.
I found a program on the Microsoft Download Center for help. Don't remember that actually was called but it is mainly to fix broken installations of MS Office (when they go to halfway, so there are entries in the registry, but the installation has not actually finished... so that windows will not let you install or uninstall). There just uninstall things correctly and released their registry keys. I zapped the entrance MSVC 2005 that has been there all my installers started working again!
Fantastic.
So yes, by sorry, that's probably all really confusing... was actually broken registry ultimately. Fixed by Googling for a few days. :)
-
I received an error message that her "air police to act is absent from the law" How can be resolved? I have vista 32 bit
Hi ftlaud2004,
1. when exactly you get this error message?
2. you have made no changes to the computer before the broadcast took place?I suggest you perform the clean boot and check if the problem persists.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: follow step 7 of section of boot KB929135 to the computer in normal mode. -
Windows Xp user tries to download windows defender and ger the error message. How can I reslove it?
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
Maybe you are looking for
-
HP 50 g: help a friend HP 50 G says he need map GB SD a1 by the Cal can find only 4 GB
Hello everyone, I have a friend in Saudi Arabia, who just bought a new HP 50 G, it is tring to find an SD card for it. He says he must have a 1 GB card, but I though it would use what is the maximum size, though i read before HP it wasn't size max th
-
Camileo X 400 loss of video files
I have a new Camileo X 400 with a sandisk Ultra 64 GB 30 MB/s installed SDXC card. On the two occasions that I recorded the video, about 45 minutes per video file, I played the videos on the LCD and checked, they are ok. Then, some time later, (after
-
I deleted my playlist bought my iPhone by mistake
I accidentally deleted my purchased playlist of my music on my 5 - y iPhone app has any way I can add it in?
-
Missing NationalInstruments.DAQmx.DLL
Hello I use VB .NET with Visual Studio 2010. I have downloadad the last version of the NOR-DAQmx driver, but when I call the library of NationalInstruments.DAQmx.DLL program this component could not be found. Where can I find this library? Thank you.
-
Windows 7 stuck on looking for updates
Hello, my name is Chris and I just installed Windows 7 on an older laptop. It works fine except that it does not refresh. I tried the fix windows tool I tried sfc/scannow and I installed manufacturing utilities updated to make sure that I had all the