Police is missing in the system and needs replacement?

Similar Questions

• get this error, "one of the software components required,"ms_lbfo"is missing in the system. Please make sure that you use a Server SKU, and no OS components have been uninstalled

  Original title: Windows Server NIC 2016

  Im trying to set up the consolidation of network cards on Technical preview of windows server 2016 3, build 10537 and I get this error message, "one of the software components required,"ms_lbfo"is missing in the system. Please make sure that you use a Server SKU, and no OS components have been uninstalled. »

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Hello! I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure. What can I do?

  Hello!

  I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure.

  What can I do?

  Save the relevant keys, then search your registry at HKCU\Software\Adobe\Director\12\Script

  If this does not help, save the entire branch and try to delete it

• Cursor flashing at the start of the system and hard drive not working do not on the other computer

  Original title: I need help with my Hardrive

  Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).

  In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.

  I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.

  So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.

  Thank you guys

  Hi Joemost,

  As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.

  There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.

  Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm doing a backup of the system and the error "file 0 x 80070002" not found. What is the solution?

  After execution of System Mechanic, repairs have been successfully completed. I then tried to launch backup system (three times) and it was incomplete because of file 0 x 80070002. I restarted, System Mechanic is represented, found three errors and corrected. Failed with the same missing file.

  Hello

  most of us who post here strongly recommends that you do not use Registry cleaners on your machines

  they are totally useless and can severely damage your operating system

  ______________________________________________________________________________

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  _______________________________________________________

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Is there a process or program that I can use to restore the system and configuration of the system to the original

  Hello

  I would like to know if there is a microsoft tool or a suggested list of Microsoft that could help me restore the system and the system configuration files in the appropriate State. is not the restoration of the system. I don't know of retoring my computer to an earlier time, nor on the restoration of computer purchase. 

  I thought that my computer has been compromised in some way, and the intruder was accessing my unit via some sort of connection distance.

  I received the support of the malicious software company, and I think that my computer is fine now.

  And so the question with which I opened this post: I would like to know if there is a Microsoft tool or a suggested list of Microsoft that would help me to restore the system and the system configuration files in the appropriate State. I'm not taling about system restore. I speak not of retoring my computer to an earlier time.

  Whenever I start to notice the strange behaviour of my computer, I would like to launch this program and follow this procedure to reset all the settings and files to a suitable State. The reason why run alone to detect malware problems, and that if there is remote access to my computer inadvertently, the intruder can do a lot of editing of files which is not identified by the malware. and I believe that if I was able to run a program like this, all the changes took place, which expose my device, but the rules of behavior systems can be reversed for a proper state.

  I read an article on how to repair my operating system, but it forced me to get a copy of it; However, given that the supplied operating system with preinstalled on this computer, I could not follow the instructions. Article I read to all system and configuration files that meet the standards of the manufacturer, without losing files and installed programs.

  Thank you

  Hello

  Already, you mention that you can do; either a repair installation.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  And make sure that read you all the information under 'warning'.

  It also tells you what drives you can and cannot use to do.

  ________________________________________________

  You can use this to fix the corrupted system files.

  "Command SFC/scannow - System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  See you soon.

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• _ (Speaker) volume icon is missing from the toolbar, and I can't adjust the volume! How do I get it back? __

  The volume
  (speaker) icon is missing from the toolbar, and I can't adjust the volume! How can I get that back?

  Hello
   
  What changes did you do before the question?
   
  I would like you to follow these steps to solve the problem.
   
  Step 1:
   
  a. right-click in the taskbar near the time display and you'll get a context menu.
  b. click Properties.
  c. under the icons system to always display, check the volume.
  d. click on apply.
   
  Step 2:
   
  Click on fixit from the link below.
   
  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011/en-us
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have a 64 bit system and need to change my IE 64 32-bit

  I have a 64 bit system and need to change my IE 64 32-bit

  Read this info on Flash and 64-bit and 32-bit browsers:

  http://kb2.Adobe.com/CPS/000/6b3af6c9.html

  Read the info Adobe above, and very interesting way to use Flash using 32 bit browser in the link below:.

  http://pietschsoft.com/post/2006/12/Vista-experience-update-Windows-Vista-x64-runs-32-bit-Internet-Explorer-by-default.aspx

  The Internet Explorer shortcut in the Quick Launch toolbar, and in the x 64 Vista Start menu will run the 32-bit version of Internet Explorer by default. Why run the 32-bit version if IE on the 64-bit version of Vista?

  There are actually two shortcuts for Internet Explorer in the "Programs" menu Why two and what is the difference?

  This is the title of each and they run exe:

  Internet Explorer
  "C:\Program Files (x 86) \Internet.

  Internet Explorer (64-bit)
  "C:\Program may Explorer\iexplore.exe.

  One runs IE in the "Program Files (x 86)" folder, this is the 32-bit version. The second is the 64-bit version.

  How can I make the Quick Launch shortcut to run the 64-bit version of Internet Explorer?

  1. Right click on the shortcut
  2. Click 'properties '.
  3. On the shortcut tab, replace the contents of the text box 'Target' with the target of the shortcut in the menu 'Programs' 'Internet Explorer (64-bit)'.
  4. Happy surfing using IE 64 bit

  There are traps to running the 64-bit version of Internet Explorer?

  In fact I know there. At the time where as I write this there are no 64-bit version of Flash Player. So, if you need to view a Web site that uses Flash, then you will need to use the 32 - bit IE version. at least for now. I'm sure that Adobe is going to release a 64 bit version of Flash Player at the end of January when Vista shipped to consumers. But then again, maybe not since Vista x 64 works 32-bit IE by default.

  If you have any other IE questions:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  See you soon.

  Mick Murphy - Microsoft partner

• No toolbar. Tools Windows me gives the right toolbar, but still miss me the top and right those shown in the tutorials?

  No toolbar. Tools Windows me gives the right toolbar, but still miss me the top and right those shown in the tutorials?

  Thank you. He started working after I updated the software, I only got it yesterday so I don't know why she needed to be updated. But guess it of life, all work very well now but

• Police are present on the system but requires an amendment of the provision

  When I open my psd file, it says that some layers of text should perhaps be updated. When I press the update button I get the message 'Selected thwart the course of the last operation. If the problem persists, please turn off the police. If I click on 'no', the file opens, but all text layers has an exclamation point and a ScreenTip that says "police are present on the system but requires an amendment of the provision.

  I create the PSD file using the version Adobe Photoshop CS6 (downloaded from the adobe.com site) track. This trail has expired so I just purhased Photosop CS 6 (Adobe.com). Before installing the version I purhased, I uninstalled the trail version.

  I don't understand this. It the same computer and the police is a police system that comes with the operating system (Windows). I can't create all new layers of text.

  If create a new PSD file I get the same message "Selected are"failed during the last operation. If the problem persists, please disable the fonts' when ever I try to create a new text layer.

  I have installed all updates.

  Any idea?

  Photoshop uninstall, reboot, reinstall solved the question :-)

  Operating system is Windows 8 (x 64) and the police I Segou UI

• Error message Windows XP released "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp

  Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.

  Hello

  ·         You have a HP printer connected to the computer?

  If so, try the article you mentioned.

  Generic host process error message and a flashlight icon appear

  If this is not the case, check to see if this article helps you.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• Restore the system and restore point do not complete succesffully

  I have a 32 bit Vista Business operating system. I was able to get my system restore and work the restore points. I have a backup of 1 t. (Bufffalo) who works for other backups of files etc., the computer and the Buffalo blinking and seems to be something for long periods of time, but then I get an error message (unsuccessful backup) I tried other smaller disks hard backup with the same result. Can someone help me please / thank you

  Hello

  Restoration of the system and make backups are two different things.

  System Restore is to put your computer settings to an earlier date: yesterday, or last week, etc. (data are not altered during this process.)

  Backing up is backup of data or make a System Image.

  If you have problems with the system restore, this can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  This is the backup information:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  As you have Vista business, you can make a full backup of the computer...

  «How to use complete PC and restore backup utility in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  See you soon.

• Internet connectivity icon is missing from the system tray.

  I run Vista Home Premium SP2. My internet connectivity icon is missing from the system tray. How can I restore it? Thank you.

  Hello

  This should help you.

  If method 1 is not available to you, use method 3:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  See you soon.

• EU to crash the system, and when I re-installed Windows Mail spell check no longer works, ideas or suggestions.

  EU to crash the system and when I reinstalled Windows Mail spell check no longer works, ideas or suggestions

  original title: windows mail

  Define "does not work" and how reinstall you Windows Mail? It is a part of Vista and can only be reinstalled by reinstalling the operating system.

  If you get the error of language, see this.

  This language is no longer available for spell checking
  http://www.Vistax64.com/tutorials/68395-Windows-Mail-spell-check.html