Restore the system and restore point do not complete succesffully

Similar Questions

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• Is there a process or program that I can use to restore the system and configuration of the system to the original

  Hello

  I would like to know if there is a microsoft tool or a suggested list of Microsoft that could help me restore the system and the system configuration files in the appropriate State. is not the restoration of the system. I don't know of retoring my computer to an earlier time, nor on the restoration of computer purchase. 

  I thought that my computer has been compromised in some way, and the intruder was accessing my unit via some sort of connection distance.

  I received the support of the malicious software company, and I think that my computer is fine now.

  And so the question with which I opened this post: I would like to know if there is a Microsoft tool or a suggested list of Microsoft that would help me to restore the system and the system configuration files in the appropriate State. I'm not taling about system restore. I speak not of retoring my computer to an earlier time.

  Whenever I start to notice the strange behaviour of my computer, I would like to launch this program and follow this procedure to reset all the settings and files to a suitable State. The reason why run alone to detect malware problems, and that if there is remote access to my computer inadvertently, the intruder can do a lot of editing of files which is not identified by the malware. and I believe that if I was able to run a program like this, all the changes took place, which expose my device, but the rules of behavior systems can be reversed for a proper state.

  I read an article on how to repair my operating system, but it forced me to get a copy of it; However, given that the supplied operating system with preinstalled on this computer, I could not follow the instructions. Article I read to all system and configuration files that meet the standards of the manufacturer, without losing files and installed programs.

  Thank you

  Hello

  Already, you mention that you can do; either a repair installation.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  And make sure that read you all the information under 'warning'.

  It also tells you what drives you can and cannot use to do.

  ________________________________________________

  You can use this to fix the corrupted system files.

  "Command SFC/scannow - System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  See you soon.

• Restore point could not be created

  I tried to create a Point of restoration, but in vain.

  Error measage: Restore Point could not be created for the following reason: access denied (0x80070005).

  I am logged on as administrator, why I can not create a restore point?

  Hello Paul0246,

  Thanks for posting your question on the Microsoft answers Forum.

  We will try to the simple troubleshooting step: turn off System Restore, then turn it back on. This will delete all existing restore points.

  How to disable the system restore in Windows Vista:
  http://bertk.MVPs.org/html/disablesrv.html

  Don't set system restore to monitor other than readers that what is installed on Windows.

  Have you tried to add your account to the list of permissions for the directory of system restore, etc. If this does not work, then try to disable user account control and see if that is the question.
  To disable UAC

  1. Click Startand then click Control Panel. In Control Panel, click user accounts.

  2. In the user accounts window, click user accounts.

  3. In the user accounts tasks window, click turn on UAC enabled or disabled.

  4. If UAC is currently configured in Admin Approval Mode, the user account control message appears. Click continue.

  5. Clear the check box use User Account Control (UAC) to help protect your computer , and then click OK.

  6. Click restart now to apply the changes immediately, or click restart later and close the user accounts tasks window.

  If disable UAC does not help with the creation of a system restore point, try the following:

  (1) put in place a start-up in minimal mode and see if a 3rd party program or software may interfere with the system restore point.
  Follow the article below for instructions on the msconfig configuration (clean boot).
  KB 929135 - how to solve a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  (2) turn off the anti-virus and try to create a system restore point. I would also try to uninstall too.

  Please reply back and let us know if any of these steps has contributed to your question or if you still need help.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Security event log getting the message "local computer maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries. System and application logs do not receive messages

  PC is Windows XP.  The server is Windows 2000.  I have administrative rights on both machines.

  On getting PC security event log do message "local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries.  System and application logs do not receive messages

  Hi carmol,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.

  Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• I have the latest version of Lightroom CC2015.  My problem / question is with the Radial filter.  The circle, PIN and anchor point are not displayed.  Ask for help via Chat told me to uninstall and reinstall.  This does not help / correct the problem

  Can someone hepl with Radial filter / circle, PIN and anchor point are not displayed.  Thank you

  Try asking your question in the Lightroom Photoshop Lightroom forum

• plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  You can start in safe mode and restore the system.

• "Info product programmed into the system card is missing or not valid card system:

  Info product programmed into the system card is missing or not valid card system:

  The OOA product name,

  OOA serial No.,

  OOA product #.

  System OOA board ct #.

  I get this message every time I start all of a sudden. What it means and how to fix it? I just bought this laptop from staples are about 4 months!

  Jenn121 wrote:
  

  How to send the unit into operation? I was given assurances on this matter of Staples, can I put it to return? Or I'm doing something else?

  Your 1 year warranty is HP and no store, but I do not know if they accept your laptop for service. You can use HP support (phone/Email/Chat) and connect to a case of this problem and directives on service will be communicated to the customer service you HP.

• Cannot install Internet Explorer 8, error: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  Original title: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  PACKAGECUSTOMIZER. EXE-

  I just built this computer and Windows XP support.  In order to use IR, I needed to update in softtware.  The following error messages we received during the download process.  The procedure entry point ENCODEPOINTER could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.  It is one of the error messages that I received everything trying to downloand IE8.  The other was: SHREGGETVALUE W procedure entry point could not be located in the DYNAMIC LINK LIBARARY SHLWAPI.dll.  Because of these two errors, the software was never fully charged.

  What are these codes and how can I fix them?

  Hi CharlesPortillo,

  Follow the steps in the article.

  How to install Internet Explorer 8

  How to solve Internet Explorer 8 installation problems

  For reference:

  How to solve problems when you install or uninstall programs on a Windows computer

• I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  Windows has no

  I had to spend my PC this morning. Moving it, I decided to implement a new network card. When I reconnected it all the cables, I plugged my USB mouse on another USB port where it had been plugged in before. The computer is more than 7 years old and I've never had a problem with the front Windows Validation. I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  When Windows checks to see if you have moved your copy of Windows to "another computer", among other things, that his focus on the identification of several strands of material in the computer to see if they are different than when Windows was first installed.  I do not remember the list for now, but I remember that the network card is one of the pieces - and IIRC it is 'valuable' higher than others to reach the conclusion.

  You probably other elements has changed over the past seven years and now Windows has decided to have a "new" computer  Assuming that you haven't changed the motherboard - if you had, you would have had this issue at the time wherever you did--your installation is still legal.  Reactivate using your original license key. It should work online, but you will need to call the number that appears in the error message from re - validate.

• I forgot the password and that you do not have a password disk

  original title: administrator password

  I have an old laptop that I recently tried to start using again, there only one account set up and this is the administrator account.  I forgot the password and that you do not have a password disk, I know there is an F key, you can use when you start to wipe the system to its original state but can't remember what it is someone can help me?  By using the version of Windows XP Media.   Thank you

  Hi RuneTwist,

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Thank you

• EU to crash the system, and when I re-installed Windows Mail spell check no longer works, ideas or suggestions.

  EU to crash the system and when I reinstalled Windows Mail spell check no longer works, ideas or suggestions

  original title: windows mail

  Define "does not work" and how reinstall you Windows Mail? It is a part of Vista and can only be reinstalled by reinstalling the operating system.

  If you get the error of language, see this.

  This language is no longer available for spell checking
  http://www.Vistax64.com/tutorials/68395-Windows-Mail-spell-check.html

• I have 2 documents in the print queue of the printer and that they do not print

  I have 2 documents in the print queue of the printer and that they do not print.

  Hello

  Go through the following steps to delete 'deleted' printing of the print queue.

  (a) go to control panel

  (b) select system and Maintenance

  (c) select administrative tools

  (d) double click on Services

  (e) in the services list, scroll down until you find one called "print spooler".

  (f) make a right clic on "Print spooler" and "restart".

  (g) "suppression" of work will be lost and all work queued in your queue will print.

  This should help.

• At the start of my Toshiba laptop Windows 7, my password is correct, no doubt, but the system says that it is not. Why?

  From my computer, my password is not correct no doubts, but the system said that it is not, ran maleware advast and no problem. Would it be a glich in the updates? Is this a battery problem? When it is plugged in, it works after the 5 or greater.

  See the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but this looks like a corrupted user profile that needs fixing or replacement.

  Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.