Similar Questions

• Essbase Cluster - how to restore any cluster

  Hello

  I have the following plan to make (let me know if there is an error in this scenario)

  Essbase itself should be active / passive clustering on the windows cluster.

  Installation:

  Node 1: Foundation Services, reporting and analysis, Essbase Admin Services, Essbase provider Services, Essbase Integration Services, Essbase Studio Server, Essbase

  Node 2: even

  The Foundation Services, Reporting and analysis, Essbase Admin Services, Essbase service provider could me clustered using Weblogic Admin Server

  So I have

  Node 1: Instance epmsystem1

  Node 2: Instance epmsystem2

  OSH has been configured on the two afters of nodes that vertical scale was over for the Java Web Applications.

  Essbase Integration Services and Essbase Studio Server are configured on each case separately.

  So I started to configure the Essbase Server on node 1 (Instance epmsystem1)

  After I have configures Essbase Server on node 2. With the error that I use epmsystem2 as instance name.

  After the necessary manual changes of opmn.xml and essbase.cfg I could manually start und stop essbase on both nodes.

  but because the deployment were the name of the different bodies and different windows service names I could not create a unique service name to go with the windows Failover Manager.

  When I start to try on node 2 configure a Cluster on the epmsystem1 (@node2) of the cluster instance Configuration of EMP tool seems to be "full" with 2 existing knots.

  (a) could 1 remove node2 (epmsystem2) of the Essbase Cluster configuration? How?

  (b) is it possible after remove it to configure epmsystem1@node2 for essbase clustering while epmsystem2@node2 (including foundation) are still here?

  Thanks for advice

  Kind regards

  Kai

  You can try to uninstall Essbase and it should remove the registry entries, if on 11.1.2.3 there is the option to delete the instance of full EMP without uninstalling.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• obtain the cluster when it is changed

  Hi all

  IAM interested in knowning (after that the user changes the value of a cluster) which element within a cluster (any type of cluster) has been changed.

  If in a case of event structure (the NOMCLUSTER value change) I can get ctl, old val, val new Ref.

  On the other side, I would get the refnum or the name

  I know that old and new val will be Variant (on my function) so that I can accommodate for any cluster. I opened G installed on my machine and looked at the data palette open G LV as well as a secondary Vcluster and have not been able to do.

  Here is an example of a given cluster

  

  Here is another example of a cluster:

  

  I was able to do this in two different ways (always know before hand in the cluster.

  Method:

  

  Second method:

  

  This is the skeleton of the function of iam trying to build (test different possibilities):

  

  So far I've failed at this.

  any help will be apreaciated.

  Kind regards

  Try this

• Iterate through the attributes unknown cluster

  Hello

  I try to write a VI that revieces a unknown cluster (it should work with any cluster) and travels its attributes.

  for each attribute, I run different commands depending on the type.

  I tried to work with variants, but I couldn't get the actual values of the cluster (only the type and name) attributes.

  What would you recommend using a VI like that?

  Thank you!

  
  

• vMotion and new hardware (cluster) translates the decrease in performance

  Platform 1 is core 4 or 6 X 5550 X 5650 @2. 6 GHz (outside any cluster) on ESXi 5.1 r1312873

  Platform 2 is 4 core E5-2637v2 @3. 5 GHz (Cluster with Mode VCA SandyBridge) on ESXi 5.5 r2068190

  After platform vmotion 1-2 (database servers) users reported a degradation in performance.

  Looking at our charts of cactus representing the CPU usage, we see the following. (You can imagine when the vmotion arrived).

  

  Is this normal? Why is this?

  The specific virtual machine I'm showing here is a virtual machine in version 7 with 2 vCPU and 18G RAM using Linux SLES (kernel 2.6.27).

  Note After the full stop and restart, it's ok (tested on other machines affected in the same way)

  -Very well, we have now disabled power management in the new host BIOS...

• Essentials and clusters - is there any point?

  I'm using right now (under the regime of authorization ROBO) Essentials (Essentials Plus not) and I wonder if there is any point in the development of a cluster of ESX servers.

  All functionality is this group offers available in money Essentials license?

  As there is not any cluster functionality provided in license Essentials, it won't help if you create the ESXi host cluster.

  Reference: vSphere editions, what is vSphere? Leading Virtual Infrastructure | United States

• Number maximum official virtual computers Win2k8 supported in a MSCS cluster

  Please can someone point me on the official document or an answer to the following questions:

  • What is the maximum number of Windows 2008 virtual computers based supported in a MSCS cluster (based on vSphere 4.x cluster)

  • more generally, what is the maximum number of Windows 2008 virtual computers based supported in a MSCScluster (based on any cluster ESX/ESXi)

  All the documentation I've seen only speak of 2 nodes (and other sources mention that only 2-node MSCS clusters are supported by VMWARE), but I want a definitive answer to VMWARE or documentation that specifies the maximum number of VMs of Windows 2008 that can be in a MSCS cluster hosted on ESX/ESXi clusters.

  Thank you.

  All the documentation I've seen only speak of 2 nodes (and other sources mention that only 2-node MSCS clusters are supported by VMWARE), but I want a definitive answer to VMWARE or documentation that specifies the maximum number of VMs of Windows 2008 that can be in a MSCS cluster hosted on ESX/ESXi clusters.

  The documentations are correct. Even though you may be able to create a cluster with more than two nodes, the supported limit is 2 knots.

  Take a look at MSCS documents to http://kb.vmware.com/kb/1004617

  literature vSphere 4.1 (page 34):

  Table 6-2. Other requirements and recommendations of Clustering

  ...

  Windows - only two cluster nodes.

  André

• Question about adding additional disks with voting rights (AIX cluster)

  I maintain a database cluster Oracle 10 g RAC running on AIX servers and I would like to add another disk to vote. I intend to use the following, executed command as root: crsctl add css votedisk device_pathname.
  
  This command can be performed while the database and cluster services are active, or do I have to stop both before changing the configuration of the cluster?
  
  Thanks in advance for any help!

  as stated in the doc:

  * "" using the - force option while any cluster node is active can corrupt your configuration. "*"

  MetaLink Note 428681.1 (updated Dec 2008) clearly said that the crs must be stop in 10 g on all nodes before making any changes on the drive to vote

• Looking to simplify Subvi to make it reusable... Is this possible?

  I'm looking for the opportunity to make a more generic VI so that I can re-use it for multiple applications. The VI is used to write the parameters of an instrument in a configuration file (.ini). The Subvi is vipm under the library of the OpenG Variant Configuration file. Saw him take in a clustors clustor and changing their settings in a configuration file. I am wanting to make more generic for re-use so that I can use any clustor of instruments of clustors for the parameters (each insturment will be different) between projects.

  Is it possible to pass a clustor refnum and in the Subvi re - create the clustor to move to this VI?  Or should I shut up and create a new VI for each project instead of trying to do something that is reusable between projects insturment?

  

  If you think about it, very easy. Writing INI Cluster itself is of course capable of taking any cluster as input. This is why the entry is not actually a cluster, but a Variant. (Note the red dot)

  Change "Ini settings" control variant instead of cluster and your vi will be more reusable.

• Cut wire

  Hello people,

  I am facing an unexpected error in son.

  I am trying connect modules of cluster (3 items) with waveform graph, but my stay of broken wire. I am trying to connect this table in the cluster to point to the Subvi, which leads me to the following error message

  This VI does not match other screws in the method; Connector component models are different

  For reference, I have attached my Subvi here with.

  I do not see "any cluster table" any where on the VI you have set, so please be more specific. Probably, you should also include the VI call with the cut wire.

  Source of data? The terminal of two graphs are on the left side of the connector pane, it should probably be controls (= entries to the Subvi). One of them is an indicator. Make a right click... change control to correct this.

  Clusters should be very specific, consisting of two scalars and a table 1 d (x 0, dx, [data], in exactly that order of cluster). Any other table clusters won't work, of course.

• Implementation of different 'modes' in a VI

  Hi all

  I have a big project which currently has 3 trees of different sources:

  1. one that is used for the automatic simulation that takes jobs and validates the results automatically from a database. Just viewing on the front panel is an indicator of progress for the current simulation and the overall state of the simulation

  2. one who is used to simulate and validate the results in a log file. This is suitable for individual use and has nice graphics and other.

  3. Finally, one that acts as an interface with the hardware. At one point, and the Simulator individual (number two) were the same, but I shared to leanness in the code.

  My goal now is to merge all three of these features into one. They all have different facades and a little different state diagrams, but the base controller is the same throughout. My current setup looks like this:

  1.
  2.
  3.

  They are very similar, but they have their differences (different elements cluster in the clusters of two major illustrated, for one). I would just merge to be able to work on it all at the same time, rather than check the version the most recent one of my SVN, change it, hiring back and do the same thing in another version.

  I think I have a configuration file that defines a selector of cases, their initialization some globals function that allows me to mount a Variant like any cluster is appropriate for this mode. change the two main groups of variants of course.

  What do you think? Is it a futile exercise? Or y at - he deserves something to these mergers that overcomes the inherent difficulty?

  I object!  Is this "Class", or what?  If you create an abstract class that your different specific data can "fit in", you can develop algorithms that operate on the class and have each of your specific data inherits from the abstract class.  [I hope I said that right...].

  Bob Schor

• ATM E3 modules & IPSEC site-to-site on 2811-sec/k9?

  Hi people,

  I plan for a pair of IOS Firewall of 2811 on data only links 34mbits/s and may also need to protect the IPSec connection.

  Is it achievable using this platform?

  If so, I am concerned about the performance... perhaps ASA5500 would be better?

  Scenario: LAN_a - 2811-a - E3_line - 2811b - LANB.

  As always, any suggestions gratefully received!

  Kind regards

  Andy.

  You can run VPN site to site in two 2811 and ASA 5500 but the Cisco ASA 5500 Series is richer in features of Cisco for SSL and IPsec for remote access, robust site to site connectivity support. The series offers greater scalability and a greater flow capacity than the widely deployed Cisco VPN 3000 series concentrators and can be easily integrated into any cluster load balancing Cisco VPN 3000 Series.

• Grant privileges on the index

  Hello

  I'm looking to try to manage the security of some object on the Oracle DB 12 c, and I came to the objects of the index.

  After watching the magical view: V$ OBJECT_PRIVILEGE, I came across the EXECUTE privilege on the index:

  Select * from v$ object_privilege where object_type_name = 'INDEX ';

  However, after the creation of some index of test, I could not be able to set this privilege on roles and actors, get this error all the time:

  
  

  SQL error: ORA-04042: procedure, function, package, or package body does not exist

  04042 00000 - "procedure, function, package, or package body there is no.

  * Cause: Trying to access a procedure, function, package, or package body

  It does not exist.

  * Action: Make sure that the name is correct.

  I'm sure that the name is correct in the index. So, this privilege makes no sense? What is his purpose on this point of view?

  Kind regards

  David

  
  

  
  

  documentation: https://docs.oracle.com/database/121/DBSEG/authorization.htm#DBSEG99910

  On the privileges of the object

  A privilege object grants permission to perform a specific action on a specific schema object.

  There are privileges different object for different types of schema objects. The privilege to delete rows in the departments table is an example of a privilege of the object.

  Some schema objects, such as clusters, indexes, triggers and database links, do not associate the object privileges. Their use is controlled with access privileges. For example, to change a cluster, a user must own the cluster or have the ALTER ANY CLUSTER system privilege.

  
  

  On the view v$ object_privilege.

  
  

  Select * from v$ object_privilege

  where object_type_name = 'INDEX ';

  OBJECT_TYPE_NAME OBJECT_TYPE_ID PRIVILEGE_ID PRIVILEGE_NAME

  32 12 INDEX RUN

  The interesting thing here is the ID of the object type.

  The object type 1 is an index.

  Object type 32 is put in correspondence with an INDEX_TYPE. This privilege is the privilege to execute for a type of index.

  Select object_type_name

  the system. REPCAT$ _OBJECT_TYPES

  where object_type_id = 32;

  OBJECT_TYPE_NAME

  INDEX TYPE

• Deliver the new addition VCenter

  I have a new VCenter to add to vRealize 6.2.1. I add the endpoint with success, I create a new group of fabric, but I do not see any cluster managed by the Vcenter.

  The service account has full administrator on the Vcenter rights, I tried another account (also with rights)

  I waited several days in the case of an out of stock

  Another something thing to note is that I have old heap still present in the vRealize that have been deleted a long time ago in existing VCenters, I have still two clusters reported for one who has been renamed, the one with the old name and one with the new name.

  Inventory of the Temapltes seems to work very well on existing Vcenters.

  Any ideas?

  Just to understand where you are at. You have 1 end point of vCenter already created using the proxy agent that you originally installed. Is the name on the vCenter agent proxy? Then, you need to add an another vCenter. It's one of so that you do not see the inventory. So, you have installed another proxy agent and called it... vCenter2? When initial installed did you do a distributed installation or the installation of the components of the IAAS?

  vRA will not get rid of the clusters, he saw even if they are deleted or renamed. Take a look at this KB deletion of an endpoint in vRealize Automation fails with the error: this endpoint is used by the compute resources # and # storage paths and cannot delete a procedure to remove inactive hosts of vRA.

• Great metric not visible

  I created a supermetric and added to a cluster at the bottom of the great metric page object in vrops 6.0, but it is not displayed on any cluster when I discovered the.  Is there another step I need to do?

  Thank you!

  Yes, it works as expected, you will need to navigate to the policy page and enable the supermetric for Cluster objects (in this case, the supermetric apply to all Clusters) or enable all objects (in this case, the supermetric will be applied to all objects)