Great metric not visible

Similar Questions

• Not showing is not great metric in dashboard

  Hello

  I'm probably missing something, even though I thought I followed the documentation to the letter. I want to do is display the memory consumed and physical by cluster, using two great measures.

  (1) the scope of the super o:
  Name: Physical memory capacity of the GVZ Cluster in the UK

  sum (this resource: mem: host_provisioned) / 1048576
  mem: host_provisioned = Resources: host system > memory > memory implemented (KB)

  and:

  
  Name: GVZ use total memory of Cluster (GB)
  sum (this resource: mem: host_usage) / 1048576
  mem: host_usage = Resources: host system > memory > use (KB)

  I tested the two measures with a chart and got the results I was expecting:

  

  (2) added an object type-> adapter vCenter = Compute Cluster resource type, which is shown as types of items as "VMware".

  

  (3) I went in 'administration'-> policies-> political library and choose change strategy 'by default'.

  (4) immediately went to the '5 Metrics vires and properties' section and filtered on my great metric and set it to 'State' = 'Local '.

  

  (5) back to the great metric section, I can now also see the default policies tab 'Strategies '.

  After that, I expect the metric Super to be available for a new dashboard. So I create a new dashboard widget list, I select the widget 'Top - N'. Go to edit the widget and click the metric, set type to 'vCenter adapter' adapter, select the subject 'Computer Cluster resource' and then find the super section metric... and unfortunately cannot see super old metric I have created once but can't remember how.

  

  Any help would be appreciated.

  Gabrié

  SOLVED!

  Used the wrong policy. Shouldn't you add it to the 'default' strategy, but in politics of vSphere.

• Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade.

  Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade.  The boxes are there (somewhere), and I can save the messages in them.  I can just see them or call back messages on my macbook air.  Structure of messaging and mailbox is intact on my iPad and iPhone, and all messages are recoverable.  Any help to restore the messages on my Mac would be greatly appreciated.

  The mailbox list is divided into categories with such topics on my Mac. When you position the cursor on one of these positions (with the exception of the mailboxes), you should see the Word display / hide it on the right. Please, click on show, if that's what you see.

  In the category of the mailboxes, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small tip of arrow. If the arrow points to the right, click it so that it points downwards.

  Also note that you may need to scroll the list of mailboxes upwards or downwards to see it all.

• The program window is not visible

  Hello. I use Windows XP Professional. Two days, I am facing a problem that when I open the files of a particular extension, it appears on the taskbar, but the current window on the desktop is not visible. I tried to maximize, minimize, and restore options by clicking on the task bar, but nothing happens. When I use the move option, the cursor changes to move the cursor and is placed on the upper left corner.

  Files opened properly until recently. Someone has an idea - please help. Thank you.

  Great! It worked. Thank you, Bruce! I really appreciate your help.

• Great Metric - average of several vmnic

  Hello

  Currently, I am creating a great metric for the specific workload of vmnic.

  I want to associate, for example, the workload of my vmnic1, 4, 5.

  I don't know how to do it on vROPS. I can create a vmnic but how to combine several values?

  Thank you for your help.

  Kind regards

  Julien.

  It may be 0, because this NETWORK adapter has no load of work. He me tool 10 guests to find a host who scored a workload. If you check the host environment-> hosts and clusters-> select a host, then select the Troubleshooting tab-> all the metrics. Find the metric of the workload for the NETWORK card and double click on it and a chart will show you if there is no charge to work. This will be if there is a problem with the great metric or if the host does not have loads of work on this network adapter.

  In the screenshot super 1 it shows the great metric works for nic 5. No other network cards are the workload so screenshot super 2 you can see the average of the nic 5 added to the average of the same NIC (doubling of the PIC) just change the vmnic5 to the vmnicx you want

  Here's the formula

  AVG (${, metric net =: vmnic5: use | load}) + avg (${, metric = net: vmnic5 | use | load})

• Reference on behalf of great metric in the pop-up window of widgets (heatmap)

  Hello

  I created a great metric/package and he attributed to resources and a resource type. I gave the metric super name '% use of data store '. Then, I created a heat map and set the size of the total capacity and the color by the great metric (% of use of the data store).

  When you hover over one of the stores of data in terms of heat, you will get a small pop-up that describes the measures. Unfortunately the great name metric metric is not provided here. Other users who access this dashboard may wonder what this metric is trying to represent.

  Now, it gives me this: Super Metric | sm_6: (color): 78.56973. This example is not that hard to guess buth, there might be cases where it is more difficult.

  Can you do something about it?

  

  Kind regards

  Erik Alm

  There is no work around for the behavior you observe. The heatmap displays the key supermetric, begins with sm_ and is followed by the metric ID. Raison d'etre, the names of supermetric are handled differently in separate fields of table / as attribute names (keys).

• NEW_FORM opens in the SAME session, but the data are not visible

  We have a requirement like this:
  
  -Our menu calls other forms using NEW_FORM
  -In the KEY OUTPUT of all forms of our that we call the form of menu using NEW_FORM
  - We do.
  -In the menu (form) before we call a form using NEW_FORM insert us a record in a table. We have no ' commit.
  -Normal form of an application is open (e.g. billing form)
  -We close the form of billing.
  -KEY-RELEASE of billing forms call the menu using NEW_FORM (menuform) form
  -In the Menu when new forms - form example, we must now read the inserted record and get the values of line
  -Read us the data, BUT the problem is that the line is not there.
  
  I tried this:
  -I put debug code to see if the form menu and other forms will open in the SAME session.
  - And Yes, 63325/138/79687 what we get for sid, serial #, audsid from V$ SESSION for all other forms and
  -the form of menu
  -This means that all open forms (forms app and form menu) using NEW_FORM opens in the SAME session.
  
  My question is:
  - If forms will open in THE SAME SESSION, why is - our inserted line is not visible when we come back to the
  switchboard form?
  -If we are COMMITTED to the line, then it becomes visible.
  -The problem is that we cannot make according to the requirement of the app.
  -We need her to be visible ONLY for the connected to the users session.
  -I tried using a GLOBAL temporary table and the result is the same as above.
  
  Any advice would be greatly appreciated since our application is based on the insertion of a record in the form of menu, calling from any other form of app, and when the menu form is called again this line must be visible to read.
  
  Published by: Channa 18 April 2010 22:44

  By default, the NEW_FORM did a restore when it is called, your insertion will simply be rollbacked.
  Some ideas of what you can do:
  -Using a GLOBAL TEMPORARY TABLE with ON COMMIT PRESERVE, and then issue a commit in your code after insertion
  -Use a context in the DB to store data
  -Use a package in the db to store data

• EL CAPITAN - when in safari Apple toolbar is not visible

  I tried this and do not find any answer to El Capitan and NOT the FULLSCREEN MODE. When I open safari, NOT full-screen, the Apple toolbar is not visible (the one with wi - fi, Apple, file edit, history etc.). The only thing visible is the bar with red, yellow and green circles. If I click on the safari window in another program, it comes back.

  Most solutions speak to exit full screen, but I'm not in full screen - I have several open small windows (safari, word, etc.) which are all on the desktop at the same time.

  I spent hours looking for this. One solution was to repair permissions, but has no El Capitan - it is built in.

  If anyone has a solution for El Capitan, I would be very grateful.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in the Preferenes system, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the United Nations to the Installer application or instructions to uninstall using the developer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• iPad not visible

  Updated to the latest version of iTunes (12.5.1.21) today on Windows 10.

  Now my iPad Air is not visible at all in iTunes when the connected usb cable.

  He was previously.

  Cannot sync anything.

  BTW: Win 10 now showed "Phone Companion" by default whenever I connect the usb ipad. It was not before. She did this if iTunes is open or not.

  That's happened?

  The iPad is on IOS 10.0.1 (an another recent update)

  Add above: I noticed that Hello has been disabled. Set it to automatic and started it - but that made no difference.

• Books in iBooks not visible in iTunes

  This problem appeared in the Yosemite and persists at El Capitan.  He is still rampant in iTunes 12.5.1.21 that just came out (September 2016).

  The books in my library iBooks may be assigned to my iDevices via iTunes.  When I boot my Mac, launch iTunes, select a device (for example, iPad) and click on books in the sidebar, I see all the books in my library, iBooks.

  However, if I close iTunes and then reopen it again books are not visible.

  It is repeatable.

  Hello Bernard,.

  Looks like your iBooks library seems to be disappearing from iTunes when you close and re open the app and it has happened for a long time. First, he need to know if this is happening to another user on your computer. Use this article to test this possibility and let us know how it works in another user:

  OS X El Capitan: set up users on your Mac.

  1. • Choose the Apple menu > System Preferences, and then click users and groups.

     • Click on the lock icon to unlock, then enter an administrator name and password.

     • Click on the button Add below the list of users.

     • On the pop-up menu click new account, and then choose a user type.

       • Administrator: An administrator can add and manage other users, install applications, and change the settings. The new user that you create when you set up your Mac is an administrator. Your Mac can have multiple administrators. You can create new ones and convert standard users to administrators. Don't set up the automatic connection to an administrator. If you do, someone could simply restart your Mac and access with administrator privileges. To secure your Mac, don't share administrator names and passwords.

     • Enter a display name for the new user. An account name is automatically generated. To use a different account name, enter it now, you can't change it later.

     • Enter a password for the user, and then enter again to verify. Using an index of password is recommended to help the user remember the password.

     • Click on create user.

  You may need to copy some of the books to the new user using iCloud drive or download your past buys iBook for testing purposes. For more information, see the following articles:

  iBooks for Mac: import books or PDF documents

  Download your latest purchases

  Sincerely.

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• Safari and Firefox needs ways to hide the tab bar, bar Favorites (bookmarks), so that they are not visible to others your screen, or on the full screen captures.

  Safari and Firefox needs ways to enable/disable/hide (the menu and via shortcuts) tabs, Favorites (bookmarks) bar, (and bar address [which do not have Safari]), so that they are visible to a person who you show your screen not visible on just one full screen. Yes, you can expose a screenshot that excludes one or more of these bars, but it is a nuisance to have to do, and in any case, that still leaves the problem of the bars being visible to other people who show you your screen.

  The extension does not hide the toolbars?

  On Mac in mode full screen isn't really full screen and don't cache not toolbars like on Windows and Linux.

  There are extensions to hide specific toolbars if you can't do via "view > toolbars".

  • Hide Tabbar: https://addons.mozilla.org/firefox/addon/hide-tabbar/
  • https://addons.Mozilla.org/en-us/Firefox/search/?q=hide+toolbar

• E-mail is not visible but can be opened

  Hello

  I have an e-mail account that somehow continues to receive email, but email is not visible in the list (see table).

  If I click on the email address, it will be displayed in the preview.

  Other mailboxes works perfectly well.

  I would try to repair the file.
  Right-click on the folder and select Properties. Then the Repair folder.

  On rare occasions, this can cause a loss message. Now would be a good time to make a backup, or at least to pass messages that you absolutely must keep in a different folder. Keep the Inbox, small and for incoming mail is a good practice anyway. You should always have other folders to sort the email of "Keeper" in and move them out of the Inbox.

  Good article on maintenance of the record.
  http://KB.mozillazine.org/Keep_it_working_-_Thunderbird

• WebEx not visible in every night but active in Firefox addon

  I like to use every night with the add-on of Webex (general plugin, ActiveATouch container) but it is not visible in the tab Extensions or modules. I also have Firefox ESR 38.3 and it the add-on is visible and active and works as expected.
  Sometimes I need to open the pages using IE ad - the but no provision does not work with every night.
  How can I make / them available in every night?

  You are using a Nightly 64 bit version?

  The 64-bit version does not support the version of the Flash plugin.
  You can use the 32-bit version of support for other plugins.

  • Bug 1165981 - Whitelist Flash for NPAPI on 64-bit Firefox on Win64

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• My Hotspot is not visible in the settings

  I update my iPhone to iOS 9.3 6s my hotspot is not visible in the parameter I update my iPhone of many other iOS version 9.3.1 to 9.3.3 and 9.3.4 9.3.2,and need help.

  Hello

  To configure Personal Hotspot, follow the instructions here:

  • Share your Internet connection with Personal Hotspot - Apple Support

  To help to solve problems with your hotspot, follow the steps detailed here:

  • Get help with Personal Hotspot iOS - Apple Support