Pool of testers and testing Services

Similar Questions

• The pool management and quality Service

  I've had problems with HP for over 2 years now. The first laptop, they have replaced and gave me a 8570p Elitebook that they new was not good and gave to a member of the family of the same model. I have had problems with it, run hot and fingerprints from December 2013 and open a file. Tech was released in January and replaces fan and then the numeric keypad now works sometimes. Tech said needed to order parts most never heard talk about him again. They sent an email saying they have closed the case without being fixed pc. I called and had another one opened and got a case manager very rude who called and chatted with me for two days telling me he would give me a same unit renovated, it take or leave. He told me that nobody will do better than that even though I have the extended warranty and care Pak. I told her no but my family members had problems and did not have all of the warranty and they gave him a new one as a replacement for 8770w. I continued to try to work with tech and they will call him each week saying that they have an appointment and no one does or call. Mind you, this has happened since December 2012 and it is the end of February 2014 and my pc has not yet been set. I work from my pc as a business and may not have that going. Then they tell me that we cannot replace because it was given to you in 2011 and I have documentation I received in 2012 at HP and they don't judge. They say it's still too old. It's not my fault for your product. I was treated very brutally and been put on hold and they are standing by their product. I'm not recommending them or buy from them. They have these foreign people who do not in any ways whatsoever and they call it management and customer service. HP is not going to pay my salary is their pc as a last shutsdown I did. If you can replace it for one person, then you must replace for all.

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Your best course of action is to contact the official HP customer support via Contact HP - United States of America to the United States or Contact HP - worldwide in the rest of the world.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• drops of 128 GB - iPhone GPS 7 and no service error

  I have the iPhone 7 128 GB on Verizon network with big issues, especially when I run my GPS.  It is down to no service in areas that I know I have a full 4 g LTE bars and drop the GPS signal.   When I run my GPS (tried Waze/Google/Apple) it will go down to about 3 to 5 minutes at a time... a big problem when traveling in areas you are not familiar with.  When he returns, it will often get stuck on 3G, again in the areas that I know are well covered in the 4G LTE.  I tried to reset network connections already several times and rebooted.  Lets hope that this problem is corrected.  I'm in iOS 10.0.1

  Hi toebone7,

  I understand that you regularly lose cell phones and GPS signal for several minutes at a time. I know it's important to have a good connection, if available, so I'm happy to help you.

  Your troubleshooting is off to an excellent start to restart the iPhone and reset the network settings. Primarily by continuing further, I would recommend backing up your iPhone:
  The backup of your iPhone, iPad and iPod touch - Apple Support

  Once you have a backup, I recommend you to reset all the settings on your iPhone. This will not erase all content, but it can reset it your Wi - Fi settings, access code and background image. To do this, go to settings > general > reset > reset all settings. Once it is done by restarting, reconfigure your settings and try again.

  If you continue to have problems, you can restore your iPhone as new and test it without a backup to refine the cause:
  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• AIO 926 inkjet driver incompatible with Windows 10. When is it updated and tested?

  AIO 926: Even after manual installation, 10 Windows indicates that the printer driver is not available [not known]. Can scan but not print. I go to Windows 7 and want to know if Dell intends to update and test drivers for Windows 10 and when. The Properties menu does not give the compatibility options for printer drivers.

  I spent hours trying to solve this problem and even paid for an online tech service who has finally found that Dell admits that Windows 10 is not compatible with my AIO 946 printer. I called and they urge me not not to go back to Windows 7 because they must find a solution soon. I think they're trying to get us to buy new printers and think they should have warned us before the upgrade.

• C240 M3 blocked "memory configuration and test..."

  Hello

  This server was returned by just us to Cisco, which had lent because it was new.   We try to return to service, but have encountered the following problem.

  At first startup, the server receives as much as 'memory configuration and test..' message.  Just this message, it shows no progress in actually memory test.   After a few seconds it turns off, and then turns upward again, repeat that a few times before sit down you with the "memory configuration and test.." message at the top of the screen, but now also showing the address IP of MMIC inside.   The four led above the power button shows green fixed and switch ID unit than the blue LED power buttons, as they should.

  I can get to the MMIC login screen, but the password to the default password so can't get farther in this direction until we discover the new username/password details.  Unless anyone knows how to reset the default MMIC.

  I tried the following recovery steps...

  (1) if we set the J2065 ' Clear CMOS' jumper, the server doesn't work.  It powers up to the day before, but does not respond when you press the power button.

  (2) to the "recovery" of the J2068 rider don't seem to have any effect, the server does not read the USB key recovery file.

  Any ideas?

  Thank you

  Tony S

  I remove the CMOS battery for a while, put back in place, try again and if still nothing... I would look for a motherboard replacement.

  -Kenny

• Debugging and testing custom taskflow-ADF

  Hello

  I have a custom ADF taskflow that is deployed and used in WebCenter spaces, trying to understand the process of development and debugging. How can I debug this ADF taskflow outside WebCenter, i.e. in JDeveloper spaces? Can they just be running on the server Weblogic integrated or what I need to find a way to set up debugging on the server, WebCenter?

  Thank you

  Hello.

  The white paper is nice enough explaining the new way on the deployment of the task flows into the portal and to persist on questions of web.xml.

  From my experience, if the task runs are fully developed without any dependency (spaces) Portal (like spaces API or EL Expressions) they can be perfectly run locally and tested before deploying to the portal (spaces).

  However, sometimes the task developed flow are dependent on runs inside the portal (application for spaces). From my experience, I always try to have my developers working with a Virtual Machine with an installation of site in order to get the speed in testing and deployment of task flows to the portal (spaces).

  Summarize:

  • Portal (spaces): Local Virtual Machine.
  • : Portal Install ADF frame JDev WebLogic integrated in order to have the opportunity to consume MDS development database. It allows all developers work in their integrated WebLogic sharing MDS and Services installed in a Dev environment.

  I hope it helps.

  Kind regards.

• How do you use a SOA Composite after you have deployed and tested?

  I created a Composite SOA application, deployed without any problem and tested and it works. However, I have trouble finding any info on what to do next. I would really like to know how to use this SOA Composite application in a web application. I am creating an interface that would use the composite SOA. Links to help would be greatly appreciated.
  
  This is the only help I found so far, http://docs.oracle.com/cd/E28271_01/fusionapps.1111/e15524/uc_bpel_bc.htm

  Hello

  It's a web service call, you'll get 'EM the WSDL and with her, you build the Web service client for your web application... By calling the web service will begin you the composite...

  See you soon,.
  Vlad

• How to compile and test the SIM card applet

  Hi all
  I have a sample applet:

  package sim.access.sample;
  
  import sim.access.*;
  
  public final class helloFile extends Applet implements ToolkitInterface
  {
         private static SIMView  theGsmApplet;
         private static USIMView aUsimApplet;
         private static AID theGSMAppletAID;
         private static AID theUSIMAppletAID;
         
         private static final byte[]  baGSMAID = {(byte)0xA0,(byte)0x00,(byte)0x00,(byte)0x00,(byte)0x09,(byte)0x00,(byte)0x01};
         
         protected helloFile(){
         
  
         public MyApplet () {
              theGSMAppletAID = new AID();
              // get a reference to the GSM interface
              theGsmApplet = SIMSystem.getTheSIMView(theGSMAppletAID);
         }
         
         
         public void doSomethingWithAFile(){
              
                 // returns the SIMView of the currently selected Applet 
                 // allows to implement services that are depend on specific 
                 // file in GSM or USIM application as well as to implement 
                 // technolgie independent applets.
                 SIMView theView = SIMSystem.getTheSIMView();
                 if(theView instanceof SIMView){
                      // do something with a GSM file
                 }
                 else if(theView instanceof USIMView) {
                      //do something with a USIM specific file
                 }
                 
                 // Or request a View to a specific application
                 USIMView theView = SIMSystem.getTheSIMView(aUSIMAppletAID);
         }
  
  }

  I want to compile and test, how can I do?

  Muhammad Umer wrote:

  safarmer wrote:
  You need the EXP files to be on the road to construction. This can be in the form of a POT that has a record of javacard under each package with the EXP file.

  I downloaded the package, but I wonder that, on compiling EXP file is automatically generated in the class path in the bin folder. But the I downloaded the package contains java card folder and EXP files inside of them, where should I put these files?

  JCOP generate EXP files for source code compiled for you. If you have it in a jar on your way of construction, then they are not replaced. I managed to unpack the java files and EXP files in the ZIP file of 3GPP. When combined into a single JAR file (with each package having a javacard subfolder) JCOP tools recognizes files and is able to use to build my project. All the necessary files are in the ZIP of the Web site.

  See you soon,.
  Shane

• Pool water soak and ruin the nylon strap?

  Pool water soak and ruin the nylon strap?

  Maybe over time due to chlorine.

• In preferences-saved passwords for Chrome://weave (Services of Mozilla password) and Mozilla Services Encriptación Passphrase) what are these and are they necessary?

  In preferences-saved passwords for Chrome://weave (Services of Mozilla password) and Mozilla Services Encriptación Passphrase) what are these and are they necessary?

  If you define a sync and create a new account to sync or connect to an existing synchronization account then Firefox stores the credentials (name, password and key Sync) in password manager to allow to connect to this account when you start Firefox.
  If you remove these entries in password manager then sync will stop working and you will have to set up the synchronization again.

  • https://support.Mozilla.org/KB/what-Firefox-sync
  • https://support.Mozilla.org/KB/how-do-i-set-up-Firefox-sync
  • https://support.Mozilla.org/KB/how-do-i-manage-my-Firefox-sync-account

• I had designed a Web application and tested on Firefox 18, 19, 20 and now when I check it on 21 version it is not rendered correctly. Now tell me what I need to do.

  I had designed a Web application and tested on Firefox 18, 19, 20 and now when I check it on 21 version it is not rendered correctly. Now tell me what I need to do.

  https://developer.Mozilla.org/docs/Mozilla/Firefox/releases/21

• Firefox Help my firefox top bar has been changed, I used to be able to get the file to bookmarks Format printed, and other services that I have found useful when you take information from the internet, where they went, I want them back?

  Firefox help

     Search
  

  "Found 0 results for" my firefox top bar has been changed, I used to be able to get the bookmarks printed Format file, and other services that I have found useful when taking information from the internet, I found bookmarks to the right of the new game to the top, but it seems not instantly friendly where they went, I want that they come back? »

  See:

  • https://support.Mozilla.org/en-us/KB/menu%20bar%20is%20missing

• Removal of the SBS 2011 server how to migrate DHCP and DNS services to the firewall

  I have a small client that has an old server that comes close to falling; its off primary runnign the disk space and must often be restarted.  they do not need the server and it was decided to remove the server and use a working group with NAS drive for their records.  They have a sonicwall firewall that can handle all DHCP services.  All computers have disjoint form field, all profiles will migrate the workstation's local user accounts.  all work, printing, file sharing and internet services.  When the server is stopped, after about 10 minutes the network goes down and I can't even log into the firewall.

  How I got out of shape services DHCP from the server to the firewall?  the firewall has active DHCP and the range of rental contract is configured correctly, but cann no PC connect when the server is off.

  Im trying to finish this tomorrow so if anyone can help me tonight it would be very appreciated...

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• What services are free of charge and what services cost money?

  What services are free of charge and what services cost money? Somehow I started to receive an invoice for a service I don't remember to help, nor do I remember asking to add to my internet service. I'm always afraid that I don't know what's free and what costs. I know that Microsoft programs would cost something, and probably tech services, but is there something else?

  To find information about your services:

  1. Sign in to billing and account management Web site.
  2. Under your services, click a service.
  3. Under your payment methods, click on the mode of payment listed to view your Bill.

  MSN Premium is a service that would require a monthly fee

  Hotmail more would require a monthly fee

  Windows Live services are free

  Microsoft Answers is free