Portable computer AC adapter is identical to the older camcorder AC adapter?

Similar Questions

• Just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without certificate

  wireless problem

  just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcome

  Tom

  Hello, Bill Bates,.

  I would say to contact support with their router blank:
  https://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=1&VM_CUSTOMER_TYPE=&cmd=ESCALATION_REQUEST

• where is the button to reset on the HP G60t-200 portable computer?

  My daughter portable computer went up to start (power led lights & wireless lights on but red), but the display not ' turn on.  Have you tried taking battery & unplug the power adapter, then back again, but still the same.   There is a hole of small reset on this laptop? If Yes, where?   Thank you!

  There is no reset button.

  http://support.HP.com/us-en/document/c01684768

• Windows 8 portable computer connects to the wireless network

  Details of the first computer:

  New laptop: Samsung series 3 - NP355V5C-A03CA
  Wireless network adapter: Qualcomm Atheros AR9485WB-EG
  I got this laptop this morning and have been unable to get it to connect to my network wireless at home.
  I receive the notice to "Check network requirements", and then the notice it can not connect to the internet.
  He never asks the password. I added manually the wireless network and which makes no difference.
  I followed the suggestion of /every/ in solving problems, even those who do not seem to apply, just in case.
  I tried to install the older drivers for the Ondaaah, I installed not official. I ran Windows Update twice, installed it, still nothing.
  I'm pretty computer, but it becomes for me. I googled to the ends of the internet, I have tried different things for four hours, and it does not work.
  I tried at my aunt's House and it worked, but it does not work here.
  I rebooted my router several times and been updated, nothing. At home I have a network WEP, 802.11 g
  What else could be missing? Everything connects to home without any problems, just this new laptop has a problem.

  Hello

  Thanks for posting your query in Microsoft Community.

  It appears from your description, that you are unable to connect to the network using Samsung series 3 - NP355V5C-A03CA portable wireless.

  I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  3 have you tried to connect to a wired connection?

  I suggest to follow the steps below and we update on the State of the question.

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• How can I use my current windows7 for the new portable computer

  Original title:

  Windows 7

  Hello

  I bought the original windows7 and I currently use it in my laptop. I recently bought a new laptop and now I want this original windows 7 on my new laptop.

  How can I use my current windows7 for the new portable computer

  Please notify

  Concerning

  Run you where you are unable to activate code product. It gives you a list of phone numbers for Microsoft to ring.

• How to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7?

  OT:touchpad.

  Hello, can you please suggest how to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7.

  It worked a few days ago... I don't know what I did so that it does not work right. I like to copy and paste when right or click with the left button of the touchpad... They have a key on the Panel of key with copy and paste and cancel and cut options next to the bar area to the right of the ALT key with lines and an arrow on the key... Always like the old mode right click and copy and paste from the touchpad... Thank you

  Hello

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have recived portable computer of the Government with windows pre installed 7professional but now I want to format and reinstal it I require the startup disk and product key (my OS is authentic)

  I have recived portable computer of the Government with windows pre installed 7professional but now I want to format and reinstal it I require the startup disk and product key (my OS is authentic)

  If it's a copy of volume license installed, you will need to contact your employer to find the product key and get the installation files.

  If it is preinstalled at the factory with Windows 7 Professional, then use the recovery partition to reinstall Windows 7.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• I want to reinstall Photoshop CS3 in a new laptop with Windows 10. I have CS3 SN and ready media. If I have 'disable' CS3 to my old laptop, I'm OK to go ahead and install CS3 in the new portable computer?

  I want to reinstall Photoshop CS3 in a new laptop with Windows 10. I have CS3 SN and ready media. If I have 'disable' CS3 to my old laptop, I'm OK to go ahead and install CS3 in the new portable computer?

  Yes, provided that your existing serial number is for Windows.

• Try to install portable computer on a new cs6 hearing. original disc was purchased 1.5 upgrade in 2012. Update does not recognize my 1.5 as a 'product calling it '! This happened last time as well. Adobe ID &lt; deleted by the moderator &gt;

  Try to install portable computer on a new cs6 hearing. original disc was purchased 1.5 upgrade in 2012. Update does not recognize my 1.5 as a 'product calling it '! This happened last time as well. Adobe ID < deleted by the moderator >.

  Then please use the Contact Customer Care.  If this link does not work then I would recommend using another computer, smartphone or tablet to contact our support team.

• Help on the portable computer connection on the desktop and router WRT610N

  I just bought a WRT610N and have loaded in my office which is not wireless and connected to my cable modem and the router on the desktop so that I can get the Wi - Fi of my wireless control internal Laptop Dell Insperion 1501.  My laptop shows my network I have install on the desk top and there are 4 bars green connection excellent, but it does NOT connect to the INTERNET.  How can I fix it?    Please help me sooooooonnnnnnnn.   Thank you very much.

  Try this,

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  2.4 GHz wireless settings:

  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... Make sure your wireless connection is st to obtain the IP address automatically.

• Windows 7 Task Scheduler is not wake the portable computer at the scheduled time

  Instead of stopping my laptop, I put it to sleep at night. Later, the laptop is expected to execute the sequence of tasks scheduled in my windows-7:

  1. 04:00, run a task "A". To perform this task, the laptop awakens from his sleep because "task" was to "wake the computer to run this task" activated.
  2. 05:06, Hibernate (not to be confused with sleep) the laptop by running the command "rundll32.exe powrprof.dll, SetSuspendState 0,0,0.
  3. 05:30, running a "task B". To perform this task, the laptop is supposed to wake up from hibernation, because this "task B" has also the "wake the computer to run this task" activated.

  The problem:

  Faithfully, the laptop awakens from his sleep at 04:00 to run "task A". However, it is not always faithful to wake up from hibernation at 05:30. 3 days (April 13), he stood at 05:46 instead of 05:30. Today, he was not awake to the top even by 06:05!

  Then, there are following around this interesting phenomenon :

  1. Today at 06:05, when I found that the cell had not awakened, I checked if the food was THERE... it wasn't. As soon as I turned on the power, he automatically stood. When he awoke, he showed that the battery is charged to 64%! Which implies, my manual operation of switches WE supply should not have been necessary in the first place!

     Earlier, on 13 April, however, no manual intervention of any kind has happened and the computer had its power supply IT throughout the night. Yet he stood AFTER the scheduled time.

  2. Then, this Act of waking from hibernation after the scheduled time is fascinating to me. From my point of view, the computer must either wake up on time, or it does not wake up at all because I chose NEITHER option "Run task as soon as possible after a regular check is not respected" , OR the ' if the task fails, restart every ' option.

  Here, I would like to bring a few details & confirmations:

  1. There is no defect in the backup provided by the battery of my laptop because it provides a safe backup for about 2 to 3 hours. Even if I'm typing this message, actually on battery, not on a current area of my laptop power supply.
  2. I usually leave the computer power mobile power during the night as a precaution against the batteries running out of power. Even on 13 April, it was YOU. Last night was the first exception to this regime, which began 21 days ago.
  3. I don't have either the "start the task only if the computer is powered" or the "Stop if the computer switches to battery power" options enabled for a task planned in question.
  4. I also have the advanced power settings "allow wake timers" is set to enable for "on battery" and "Plugged In".

  So, I have the following questions:

  1. Why computer faithfully to wake up from its sleep, but not as faithfully to wake up from hibernation?
  2. The State of food plays a role any in this Act of waking from hibernation? Does it matter if the computer is on battery or plugged when waking up when "start it the task if the computer is powered" or the option "stop if the computer switches to battery power" enabled?
  3. Finally, what can I do to correct this erratic behavior?

  Right - a scheduled task cannot be configured to wake the system from hibernation.

  In the properties of the task, the Condition is "wake the computer to run this task":

  

  The key words here are "Wake" and "Sleep".

  When your system is in sleep, he is still able to get a stimulus like a click of the mouse or keyboard stroke to wake up or a scheduled task to wake him up.

  The only way you can be awakened, it's if you sleep - you cannot be reactivated if you are hibernating (aka powered off completely = death).

  You cannot use a ST to wake the computer after Hibernation.

  You might be able to set an option in the BIOS to power the system at some point and have then an era channel a few minutes after this date.

  You may be able to configure your router to send a WOL packet (wake on LAN) to the system to a point and then have an era handle a few minutes after that date.

  Useless answers?

  Some often banned users has some good tips:

  Ignore responses that begin with the words "Hi" or "Hello" contain methods and steps, ignore phrases that start with the word 'try' and responses that end with the words "check if it helps" you can save yourself a lot of time and frustration.

• Computer laptop dv5 off suddenly when the battery charge reaches46%

  First of all, thank you in advance for any help possible.

  Of heres my portable computer Spec

  Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz 2.27 GHz

  3.00 GB RAM

  Windows Vista.

  Problem:

  Well my laptop around 1 year and something weird started happening a few days back... whenever my laptop unplugged and reached 46% battery charge it suddenly turns OFF... after that whenever I try to start to just the screen where it tells u whether to start windows normally or not... and turns off again... the only way to pitch it up is to plug the adapter sector and then it starts normally. I tried to calibrate the battery using the bios, but this option is not there in my laptop... try manually is not useful because it disables always when it reached 46%... so I can not entirely drain my battery.

  someone has an idea of what is my problem?

  pascs wrote:

  No its is no longer under warranty may be 1 year and a month I think.

  Then replacing the battery is what you need to do. You should be able to get a replacement battery has a reasonable price online. There is no obligation to buy an original HP battery.

  Kind regards
  ERICO

• When I go to connect to Craigslist I get: Safari can't verify the identity of the website "(account of craigslist)!

  When I go to connect to Craigslist I get: Safari can't verify the identity of the website "(account of craigslist)!

  I tried through my google Crome, he says this: your connection is not private! The attackers may be trying to steal info...

  He seemed to on other sites.

  I've tried clearing cookies, then restarting.

  He did this because my OS is outdated? My computer tells me that I'm up-to-date on my current operating system.

  a few things that seem strange for me:

  I also had the 403 forbidden message a few weeks back.

  The bash terminal had a couple times on my slider too; Seemed to do on its own.

  Thanks in advance for any help!

  My Macbook Pro: Mac OS X, version 10.6.8 4 GB, macbook pro5, 5

  The problem is due to your Mac running such a 10.6 archaic system, but you can try to use another browser like Firefox.

  Apple has not updated for security for 10.6 Snow Leopard over the years.

  The minimum requirement for Firefox is v10.6.

  You can see if your Mac can run the new OS X v10.11 El Capitan > update of OS X El Capitan - Apple Support

  In this way, you can have the latest version of Safari 9.1 installed so that you can access sites such as Craigslist

  Google Chrome works only on Mac running v10.9 Mavericks or subsequently > https://www.google.com/chrome/browser/desktop/index.html

• portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

  my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

  Hi Joseph,.

  Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

  How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

  The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

  I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

  Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

  I hope this helps.

  Good luck!

• Two questions. (1) RIP in media player 11 problems. (2) portable speakers do not turn off when the headset is plugged...

  Hey all. I desperately need help. I have a laptop "Durabook" with Windows XP meidand service pack 3 update.  The internal speakers have never turned off when I plug a headset or headphone cable of the adapter into the outlet. It is an option that I have figured out. All my other laptops have silenced the computer speakers when headphones are connected.

  The most frustrating problem I have is in Media Player when you use the tab OUT, when I insert a cd Ripper in the computer, it is not recognized.  If I close and reopen WMP (Windows Media Player) cd, the cover and all the info of the cd is here and ready to be torn APART. Once the cd ends and ejects I insert another cd and nothing happens. Once again, I've closed and reopened WMP and evrything is ready to be torn APART again.

  Please please help.  I can't be the only one who had this problem.  I removed all anti-virus programs, removed and reinstalled WMP, twice.

  I'd appreciate any help.

  Thank you all

  Carl aka theSTUNG1

  Hi Carl,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a parameter to extract music select "Always".
  a. open Windows Media Player 11.
  b. click Extract, click more options.
  c. click the rip music and make sure 'Always' is selection in accordance with article "Rip CD when inserted.
  d. click ok to apply the changes and restart the media player.
  e. check if the problem persists.

  See songs Rip (copy) from a CD to your computer

  Step 2: Make sure the headset is plugged into the socket on the right
  a. connect the headphones to the right sleeve and check the result.
  b. you can also right click on the volume icon and adjust the sound settings.

  See adjust the Volume of the computer

  Visit our Microsoft answers feedback Forum and let us know what you think.