Portal of MW: OracleAS Portal from 10g to Oracle Middleware 11g Rel 1

Similar Questions

• Oracle Forms 11g - ORA-12154: TNS error

  Well, until I post my info, I searched and searched all over Google, OTN, Experts-Exchange, etc... to try and figure this one out and I am puzzled. So here goes. I get the dreaded ' * ORA-12154: TNS: could not resolve the connect identifier specified * "error. This is my environment:
  
  ----------------------------------------------------------------------------------------------
  Server: Red Hat Enterprise Linux 5 version performs the following:
  Oracle Database 11g (Rel 1): 11.2.0.10
  Oracle Fusion Middleware 11g (rel. 11.1.1.2.0) Forms Server
  
  I can connect via SQL + no problem
  ----------------------------------------------------------------------------------------------
  Client: My Windows XP Professional PC.
  
  I can't TNSPING the SID of the database, no problem.
  I can connect via SQL + no problem
  I can connect via TOAD to the db without problem
  I can connect to Oracle Enterprise Manager through the web interface, no problem
  
  I have 2 houses Oracle (Oracle 8.0.6, Oracle 11.1.0.1) on my PC. The current House is currently the 11g one. I have my background on my PC Setup very well.
  
  The problem is when I try to run an example of form through the web, I created, the login prompt appears and I get my name in username/password / database SID and it is, I get the error. Of the clues as to what I should look for? Ultimately it is an application that all users will access and they should not have to worry about anything whatsoever to have installed on their PC.
  
  Thank you

  Keep in mind that file tnsnames.ora forms 11g is under $ORACLE_INSTANCE/config

• FMW: Portal Upgrade Advisor - review of videos on "how to install Oracle Middleware 11 g Rel 1 portal and explorers.

  Configuration - upgrade the test system - 'build base Middleware of Oracle 11g Architecture'
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"

  Part 3 installation of the basic Oracle Home (10:40)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT3 & inline = 1

  RE: NOTES: so it seems that do us step 4 [update software/binary in the ORACLE_HOMEs] here
  instead of step 3 [install but do not configure Oracle Identity Management] starting from
  'Build base Middleware of Oracle 11g Architecture'.
  Maybe suggest to change the documentation in MOS Advisor upgrade,
  to remove step 3 until after the upgrade the binaries and install patches 11g group.
  Or change this 3/4 part to talk to install IDM.

  
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  RE: NOTE: it looks like a typo/read error on the page that says "necessary to run the Wizard Patch (PSA) Set?"
  There, it says '... If the Group of hotfixes version UCR has been used, no action is required. "I think that it should
  say «...» If the Group of hotfixes RCU version was NOT used, no action is required. »

  
  

  Part 5 running the Configuration Wizard (08:50)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT5 & inline = 1

  Specify the Application FOR page/section: you must specify OID information for installation of the portal.
  If you do not wish to integrate oracle descoverer services and do not want single sign - on, uncheck the box.
  RE: NOTICE: verbal instructions on this boy, are confused.    Instructions on where to get information from the OID would be useful
  here. in addition, the instructions show that if you have specified use of discoverer, a check box is displayed and check
  That's if you want to use the SSO on.   A blurb on what if you did NOT specify discoverer would be appropriate here.
  Or something about this discoverer is and if it comes by default with the installation.

  First, as discussed in another thread, I plan to reformulate the wording of this step... so thanks again for your comments.

  Note on this question / comment

  "To understand at the time where we upgrade repository portal.  In my opinion, who runs the configuration wizard PFRD is that fact for us.  I will go through the video.    And me who runs the IDM upgrades OID configuration wizard. »

  PFRD Configuration Wizard does not upgrades the repository of the portal, it creates just a portal 11g AS Instance against the repository Portal 10g's existing. The Upgrade Wizard upgrades site two-step

  1 put Update Wizard (option "upgrade intermediate level Instance") upgrades 11 g base instance configuration so that it matches the source portal AS10g instance configuration

  2 Upgrade Wizard (option "Upgrade the repository in metadata schemas") upgrades the repository Portal 10 g.

  It's a similar story for instant messaging, only the IM Upgrade Wizard upgrades the configuration file system and the GI database schemas in a go (IE there is no upgrade wizard option separated to "Upgrade the repository in metadata schemas")

  I think that the Viewlet created the PFRD and IDM Upgrade Guides whether clear.

• FMW: Portal Upgrade Advisor - video part 4 patch the Oracle Home "how to install Oracle Middleware 11 g Rel 1 portal and discoverer" should specify to use previous pfrd Oracle Home

  NOTE: from 'build base Middleware of Oracle 11 g Architecture. "
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  The verbal and demo explanation does not use the original location/Oracle HOme of the previously
  installed for the binary PFRD base.   It probably should.

  In addition, for some steps to follow to patch binaries PFRD, I'd put it:

  Step 4.  I am guessing that the patch will establish an another sub dir Disk1 and don't want to overwright
  installation of the initial PFRD, therefore, moves the Group of hotfixes as follows.

  CD/opt/web/install/PortalUpgradeAdvisor/pfrd
  960 ls - ltr
  Group of hotfixes mkdir 961
  Group patches 962 mv p11060983_111140_LINUX.zip
  Group patches 963 cd.
  Unzip 964 *.

  RE: of course, having unpacked the group created patches another subdirectory Disk1 with his own runInstaller
  VNC gui:

  I guess, all we are doing is patching of binary files, nothing should be running.
  Maybe an environment set in same, as when we ran last the PFRD install, however.  There we / I had
  run. / set_mid_clean after making sure the files property was oracle: oracle.

  Yes, VNC gui and
  / opt/Web/Install/PortalUpgradeAdvisor/pfrd/Patchset/disk1
  . / runInstaller

  Here again, we select Install Software - is not configured
  RE: Get the message again on this screen "installs the software only. After said is finished, use
  config.sh at ORACLE bin directory to configure the working bodies of these components installed.

  Specify the installation location.  Always to
  Oracle Middleware homepage: / opt/oracle/Middleware
  and
  An Oracle home directory: as_2 # I bet it must be as_1 because that is where the initial PFRD install binary files has occurred.

  NOTE: The summary of the Installation in the video screen escape the Oracle Home is the previous specified during the initial installation. That is to say. PFRD_Binaries.   I guess I should have named that instead of taking the default as_1. At least I would have to have done that.  Well.  Maybe this story might help the next guy.

  Also

  NOTE: The Installation screen is not "from" group of patches as in the video where it says
  Install Oracle Portal, forms, reports, and discover the Group of hotfixes.
  

  Hi Charlie
  I'm a little confused by this feedback. Especially when you say that you see the option "install - do not configure. Should this option is visible only when you run the Basic 11.1.1.2 PFRD the software installer. The Group of hotfixes 11.1.1.4 has his own 'runInstaller'... and this will display what you see in the viewlet. You definitely run the installer from the directory of stage in the Group of hotfixes? (I'll do my own validation test - if I find something strange going on... I'll report.)

  I now take the following action

  1. I will put the Viewlet so it is clear that the Group of hotfixes is staged in a different place from the base 11.1.1.2 media
  2. provide that nothing must be running (because at this point, no instance of 11 g of construction has been configured)
  3. There's a "slippage" that illustrates the Middleware and Oracle Home entries in the screen "Location of Installation to specify" IE

  Middleware homepage: / u01/alca_portal/middleware
  Oracle home: PFRD_Binaries

  However, you will see that this slide for 2 seconds (which is an error) and if you miss it probably.

  Just FYI - the House of Oracle 11 g correction is in general the same procedure as patching a mid-layer House AS10g i.e

  -You set the Oracle Home base using the installation of the basic software program
  -You patch the Oracle home using the installation program of the Group of hotfixes

• Oracle forms 11g can be deployed on the WebSphere from IBM server?

  I found the following paragraph regarding the Middleware components that are supported on IBM WebSphere, but this list does not specifically mention the Oracle Forms or Oracle reports.  Does anyone know if Oracle Forms and reports works OK on the IBM WebSphere server?   Thank you!

  You can configure the following Oracle Fusion Middleware components on the servers of third-party application support:

  • Oracle SOA Suite
  • Oracle WebCenter Portal
  • Oracle WebCenter content
  • Oracle Data Integrator
  • Oracle Business Intelligence
  • Oracle Application Development Framework (Oracle ADF)
  • Oracle Application Developer Runtime

  For this release of Oracle Fusion Middleware 11g, Oracle supports only IBM WebSphere Application Server as an application server third-party for these products to Oracle Fusion Middleware.

  Oracle Forms/Reports 11 is not supported with WebSphere.  Its installation requires the deployment in Oracle WLS 10.3.x.

• Impossible to upgrade the schedular schema from 10g to 11g

  Hello
  
  Im doing an upgrade of the schema S_NQ_SCHED from 10g to 11g, its failure to upgrade, while the review, he throws the error in the log below:
  
  
  [2012-03-16 T 12: 09:21.363 + 02:00] [BIPLATFORM] [ERROR] [update. BIPLATFORM] UPGCMP-05001: table 10 g S_NQ_SCHED. S_NQ_JOB. Oracle.IAS.mrua.plugin.BI.DBTable@6a493b65 does not use the default columns.   He can't be updated[2012-03 - 16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01008] [update. FrameworkMR] review of the scheme has failed for Oracle's BI platform.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. FrameworkMR] Cause: upgrade framework determined that the review of upgrade phase failed for the named component. This is often due to a the prerequisite check failed. No patterns changes have been made to the component that failed. Action: Check the log files upgrade for the cause of the message. Fix the source of the problem if possible and start the exam. Do not have to perform a real upgrade upgrade all components unless mode to succeed during the review.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01015] [update. Specific software components FrameworkMR modules] some update of the repository report the failure.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. Cause FrameworkMR]: one or several modules specific to software components returned a status of error during upgrade from the repository. A few other components could be upgraded successfully. Action: Review upgrade logs to determine which components have failed and locate the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to restart the upgrade.
  [2012-03-16 T 12: 09:21.379 + 02:00] (Framework) [NOTIFICATION] [update. Finishing frame] examination of the components.
  
  
  
  Kind regards
  KK

  KK,

  When we install OBIEE 11 g, we run a repository creation utility (RCU) creates two schema called schema of metadata (MDS) and BIPLATFORM.
  The planner of all associated tables were created in the BIPLATFORM schema.
  If Enterprise Manager (EM) takes these patterns automatically and executes BI 11 g Planner services.
  Connect with the BIPLATFORM schema in the data source. Here we can see the Scheduler tables S_NQ_JOB, S_NQ_INSTANCE, S_NQ_JOB_PARAM, S_NQ_ERR_MSG which are born already when we ran RCU related

  For more information,.

  http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-OBIEE-11g.html

  Thank you
  Oldia...

• Upgrade to ebs r12 dbtier from 10g to 11g note.

  Hi all
  
  I'm looking for a note of oracle put dbTier 10 g to 11 g. EBS r12.
  
  Thanks in advance.

  Hello

  Please refer to:

  Note: 735276.1 - interoperability Notes E-Business Suite R12 with Oracle Database 11 GR 1 (11.1.0) material
  Note: 782224.1 - interoperability Notes Oracle E-Business Suite Release 12 with 11 GR 1 material (11.1.0.6)

  Oracle Database 11 GR 1 material (11.1.0.6) certified with E-Business Suite Release 12
  http://blogs.Oracle.com/stevenChan/2008/09/oracle_db_11gr1_11106_certified_with_ebs12.html

  If you have upgraded to R12 (12.1.1) and always on 10 gr 2 or you want to patch 11g for the last group of patches, refer to:

  Note: 802875,1, interoperability Notes for Oracle E-Business Suite release 12.1 with Oracle Database 11g Release 1 (11.1.0)

  I suggest that you add (Note: 380482.1 - Oracle E-Business Suite Release 12 battery bitumeuses Documentation) to your list of favorites, it contains all the necessary documents, you should consult.

  Kind regards
  Hussein

• Oracle Designer 10 g (10.1.2.6) + Oracle Fusion Middleware 11g

  Hello
  
  Can Designer of Oracle 10 g (10.1.2.6 - latest version) generated files (*.fmx, *.plx, * .mmx, *.) Rep...) deployed on Oracle Fusion Middleware 11g platform (Portal, forms, reports and discoverer 11.1.1.2.0 + Weblogic 10.3.3 Server) without recompiling again?
  
  With respect,
  Goran

  In the release notes for Designer 10.1.2.6 it are not about setting up Oracle Designer to work with Oracle 11g form (this is a quote of Designer 10.1.2.6 is now available. )

• can I use "Oracle Database 12 c: performance management and Tuning" training for the certification "Oracle Database 11g: Performance Tuning 1Z0-054 '"»

  I took "Oracle Database 12 c: new performance management and Tuning" the oracle University training. Now I would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054 ' exam. Is this possible?

  I guess you ask if you can use the course 12 c as long as the condition of course for the review of 11g.  Over 12 c is not listed as one of the options for the 11 g certification and course requirements are normally specific version - at least with DBA certifications.  If you are already an Oracle OCP DBA, of course, there is no requirement of course for the review of performance tuning.  From what I know the training requirements for other certifications, I do not that you will be able to use it. However, Brandye will provide a definitive answer to whether the course 12 c would be acceptable for 11g certification.

  That said, I'm with John - 12 c review is about a community of 85 to 90% in the review of the 11g and is currently about 20% of the price while it is in beta.  What is the point of trying to cross the releases?

• Upgrade to the 10.2.0.4 release without Oracle Database 11g

  Hi everyone, I need to upgrade the OWB Production current client version:
  
  Client version: 10.2.0.1.31
  Version of the repository: 10.2.0.1.0
  Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production
  
  to the 10.2.0.4 release, using the patch # 7005587 (uploaded on Metalink)
  
  I have red as the Patch Readme and I found that it is necessary to migrate to Oracle Database 11g.
  Now my question is this: can I apply the patch above WITHOUT upgrading the database?
  The customer asked me if it is possible to continue to use the 10 g Enterprise Edition Release 10.2.0.5.0 and upgrade OWB to the 10.2.0.4 release... Is this possible?
  
  Thanks in advance for your help
  
  Alex

  Hello

  In my view, there is some lack of communication happening. 10.2.0.4 OWB can be used with Oracle 10.2.0.5.
  We even had OWB 10.2.0.5 running against Oracle 10.2.0.5

  According to me, that there are some bad this info in the patch readme file. OWB 10.2.0.4 includes support for Oracle database 11g (as a Source). This is a major change incorporated in this version.

  Thank you
  Fati

• Configure Enterprise Manager in Oracle Database 11g

  Dear all,

  I want to configure my Enterprise Manager Console for Oracle Database 11g. During installation I unchecked "configure EM Console."

  I have Oracle Red Hat Linux 6.5, please guide me how can I start my console em on the Linux environment.

  Kind regards

  Atif Zafar

  Hello

  If you want to create or configure Enterprise Manager console, follow these steps:

  • Set ORACLE_HOME environment variable
  • Set ORACLE_SID
  • ORACLE_HOSTNAME environment variable set. Use the same value returned by the command "hostname".
  • Run the emca (Enterprise Manager Configuration Assistant).

  $ emca - create config dbcontrol db-rest

  • Follow the instructions.

  Kind regards.

• Oracle forms 11g link java updated request each time, ends up with a blank page

  Hello

  Kindly advice the cause of the issue where my form link 11g oracle launches not required to install the update of java every time after installation of java 8 that it will end with .a page blank for a second time if refresh us the page new message opens to install JAVA8. But same link if I use Windows 7 64 bit IE9, the link works correctly.

  Here is the version of the product

  Form of Oracle & report 11g R2 (11.1.2.2.0) (64-bit)

  Oracle Weblogic Server 10.3.6 (64-bit)

  Oracle Database 11 g Release 11.2.0.4.0 - 64 bit Production.

  Standard Windows Server 2012

  Internet Explorer: 10

  WebLogic and WLS_FORMS server is running

  link is http://10.184.152.210:8888/forms/frmservlet? config = rom

  Kind regards

  Supriya.

  The Forms Runtime will use the version of Java that are specified in the formsweb.cfg.  Take a look at your formsweb.cfg and check the jpi_classid = and jpi_mimetype = parameter values and put them in the Java version you want to use.

  Craig...

• Oracle Webcenter 11g R8 recognition forms

  Hello friends,

  Can we install the recognition of forms Oracle Webcenter 11g R8 Windows Server 2012?

  According to my knowledge we can install on Windows 2008 R2.

  I went through the matrix of certification but cannot find my answer.

  -Thank you,

  Prashant.

  Hi Prashant,

  WebCenter 11.1.1.8.0 pattern recognition is not certified against Windows 2012. The operating system that is certified only for this version are Windows Server 2008 R2 and Windows 7.

  NIC

• Oracle Fusion Middleware 11g R2 installation problem reports and forms

  Hi all

  I am installing Oracle Fusion Middleware 11 g R2 forms and States (install version 11.1.2.2.0). It gives me following error by specifying various 'installation locations"(step 5):

  INST-07248: rental house Middleware specified is not a valid location (for the location of the Middleware Oracle home: C:\Oracle\Middleware\Oracle_Home)

  INST-07248: rental house Weblogic specified is not a valid location (for the location of the Weblogic Server: C:\Oracle\Middleware\Oracle_Home\wlserver)

  I installed WebLogic server worm 12.1.2.0.0 in these places. No idea how to do this setup forms and reports program recognize Weblogic version 12.x OR should I install ver Weblogic 10.3 only to work? (The value in the Weblogic Server location field to step "Install location", by default Weblogic 10.3 worm).

  Thanks in advance for your answers.

  Kind regards.

  Girish

  WebLogic 12 c is not certified with forms & reports 11.1.2.2.

  You need to install the earlier version 10.3 (10.3.6).

  Control of certification matrix:

  http://www.Oracle.com/technetwork/es/middleware/docs/Oracle-Forms-111220certmatrix-2087910.xls?ssSourceSiteId=otnen

  Concerning

• Oracle Forms 11g - OFA - ADF Developer?

  Hello

  I am a newbie in these conditions and therefore don't know much about the difference...
  I finished the developer of the OCA and now I don't know what to choose then?

  what I've seen online on the next certification path is
  http://education.Oracle.com/pls/web_prod-plq-dad/db_pages.getPage?page_id=5001 & get_params = p_exam_id:1Z0 - 151 & p_org_id = & lang =

  It's Oracle Fusion Middleware 11g: create Applications with Oracle Forms

  
  also, I've seen some good hype about FAD and OPS being newbie I don't know what is the difference or either I can't find all of them in the lists of Certification.
  which I suppose is OAF is the same as Oracle Fusion Middleware 11g: create Applications with Oracle Forms

  but where is the certification of the ADF? any link

  also what to choose regardless of what I have in mind.

  Thank you

  Concerning
  Hassan Siddique

  (1) I guess there not available for OFA certification. However there is available land (Oracle University)

  (2) well, for that you need first to decide. you want to stay with forms and develop in sql, PL/SQL (learn more about the DB), then forms is the way to go. If you enjoy working with java and develop J2EE applications, you should work with ADF. OAF I don't know much about it other that it's built on an older version of the ADF, but is more suitable for E Business Suite (it has not used both in the open community).

  Timo