Portege 3490 - new Seagate hard drive (20gig) - cannot install OS

Similar Questions

• We had to install a new hard drive.  I installed CS5 - no problem, but cannot download and install CS6.  Can you help me?

  We had to install a new hard drive.  I installed CS5 - no problem, but cannot download and install CS6.  Can you help me?

  Hello

  You can check the above troubleshooting steps: https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

  Let us know if this helps!

• Replace T420s with a new SSD HARD drive

  Hello

  I wonderd if it is possible to replace with a new SSD HARD drive, while putting the HARD drive in the Bay of Ultra-slot.

  And if so, what SSD model should I buy, and how do I transfer the operating system and the data for the SSD?

  This SSD model will be compatible?

  Corsair neutron Series 120 GB SSD Sata III MLC 2.5 inches Retail

  Thank you very much

  Guy

  Yes, what you are proposing is quite feasible. You will need an adapter Ultabay to organize your HARD drive in the Ultrabay housing on your system. These are available from Lenovo, but are relatively expensive. You can get a much less expensive (~ $ 10) a compatible version on eBay. It is not as well finished as the real issue, but it works well.

  The best way to transfer everything on your SSD is "clone" of your HARD disk using a software as Acronis True Image. If your current HARD drive is made by Western Digital or Seagate you can get a free copy of Acronis on their Web site. Put the SSD in the SATA drive Bay and the HARD disk in the UtlraBay. Set the T520 to start from the Ultrabay, install/run Acronis here and make a clone for the SSD. Then boot from the SSD and you'll be all set.

  With respect to the SSD, many people here have had good success with Crucial M4, 520 Intel and Samsung 830. I guess that Corsair works perfectly as well, but I didn't know all messages from people here who have done so.

  Before ordering a SSD confirm if the HARD drive is 7 mm or 9.5 mm thick. Then order the same thickness SSD. This way, you will be able to use the metal rails caddy and rubber who now hold your HARD drive to contain the SSD.

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  Keep all the files on external hard drive image?  Nothing else and no pictures on the desktop?

  Keep all image files both places?

  What is the best way to go through thousands of images in the Organizer to identify and place them in files?

  Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?

  As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!

  As I only have the version of the EP, here is some info on the organiser:

  https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html

  Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.

• Transfer iTunes library to a new external hard drive.

  I did a few years back, but as for the double control procedure to ensure I would correctly.

  My iTunes music library is stored on an external hard drive. It's almost to capacity, if I want to transfer the files from current music on an external hard drive more.

  I don't want to "lose" my preferences iTunes, settings etc that I have playlists, ratings and other data.

  I understand that the first thing is physical copy music files to the new external hard drive.

  What is the procedure to then "point" to the new hard drive.

  Thank you.

  Copy the iTunes folder whole, not only the media, on the external drive, launch iTunes with the Option key, choose this library and keep a backup on a different drive of it.

  (138343)

• Hard drive partition and install the new operating system

  HY,

  If I partition my hard drive and I install a new OS (E.g. Ubuntu 14.04) my warranty ends?

  Thank you

  SA

  Hello

  No, it will not void the warranty but HP only supports the problems with the original operating system and prove the operation of the equipment of the original OS.

  Do the recovery disks and keep them safe before so that you could go back to factory settings if there is no problem of partitioning.

  Recovery partition usually works after partitioning, depends on your luck, but you could make the 'Active' Partition in disk management and try for recovery if it works or not.

  Thank you

• New hard drive, how to install windows xp again

  Hello, I recently had a hard drive crash where I lost everything so I went out and bought a new larger hard drive and I solved the problem but I don't have a windows xp installation disc.  I have my product key for oem software she had on it before on a sticker on the side of the computer, but I have to drive. What should I do?

  Try contacting the manufacturer of your PC to the replacement recovery media.

  Tricky

• I recently bought a new larger hard drive for my XPS M140 / 630 M.

  I recently bought a new larger hard drive for my XPS M140 / 630 M. I am unable to get windows XP to complete the installation on the new drive. How can I get windows install completely? Thank you!

  Hi A.P.ZG,

  Thanks for posting in the Microsoft Community.

  Since you are facing a problem to install Windows XP on the new drive, it would be useful if you can answer this question to help you further.

  You receive error codes or messages during the installation fails?

  You can read the article and check if it helps to solve the problem.

  How to partition and format a drive hard using the Windows XP Setup program

  Note: If the disc contains all the data, make sure that you back up all your important data before you continue.

  You can also disconnect all the external devices connected to your system (except the keyboard and mouse) and check if it helps.

  If you need further assistance, please answer and we will be happy to help you.

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I can't initialize the disk for my new external hard drive

  I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP.  The driver for the new hardware is not digitally signed because I can't initialize the disk.  So I can't get my new hardware to run.  Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?

  Hello Honduras1,

  Can you simply right-click and format everything first?  The drive must be formatted before use, make sure that you format NTFS.

  See you soon

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse

• Reformat the new portable hard drive

  How can I reformat a new portable hard drive MAC formatted to work with Windows XP?

  Hi cb258,

  You can try to format external driver and check if it helps. Inorder to do this seam the steps:

  Sign in as an administrator or as a member of the Administrators group.

  a. Click Start and then click Control Panel.

  b. click on performance and Maintenance, click Administrative Tools and then double-click computer management. In the console tree, click Disk Management.

  NOTE: You can also click Start, point to run, type diskmgmt.msc, and then click OK.

  c. in disk management, click on the external drive you want to format (or reformat), and then click on format.

  You can see the following article for more information:

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Development of a new second hard drive

  To install a new second hard drive, I went to the Manager > storage > management of the disks and initialized the new drive with a right click on the left side. Now I guess I need right-click right the right side to make a 'new Volume Simple Format' my question is

  1 Select 'quick format '? and

  2 should I choose to "enable file and folder compression".

  or just leave both of these boxes unchecked?

  Please notify.

  Thank you

  Hi Spaceman 69,

  Just select Quick format. You need not enable compression of files and folders.

  Format the drive to NTFS

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com