Portege M200: Need recovery due to the SD card CD

Similar Questions

• Re: Portege M200: need to start Win XP boot disk

  Hi all

  I'm looking for a boot floppy to boot XP tablet edition disc 2005 on my Portege M200.
  If someone could point me in the right direction that would be great.

  Hello

  You must initialize disc?
  I wonder why you need this disc?

  I think you don t know a fact. The diskette of starting in not necessary but you need a compatible CD/DVD player if you want to start from the CD or DVD.

  The Portege M200 supports the recovery through the BIOS (by pressing 'C') with the USB 2.0 card and PCMCIA (16-bit and Cardbus).

  _Following and controllers (USB, PCMCIA) can be used: _
  one) Toshiba, PA3352E-SCD2, CD-RW/DVD-Rom USB 2.0 drive
  (b) Toshiba, PA3402E-1DV2 USB 2.0 DVD Super Multi Drive, SN: 5362870112
  (c) Toshiba, PX1055E-1NST SN: 3431490096 with a PC card (16 bit), cable, PCMCIA Card, Rev.043.242, SN: 18496 043 3999 0343 01093
  (d) Toshiba, PX1055E-1NST SN: 3431490096 with CardBus, cable II, CARDBUS, Rev.136, SN: 16693 136 3999 0149 06122

  The setting of 'PC Card Controller Mode' in the BIOS should be 'Automatic Selection '.
  This means that you have nothing to change in the BIOS, because it is the default value.

• Portege M200 - How can I change the BIOS battery?

  Hallo,

  I have a Portege M200 and I want to change the battery of the BIOS but I don't know where it is!

  Can someone help me?
  Thank you!

  Hello

  The BIOS battery is placed on the motherboard and to exchange it, you must remove a large number of parts and screws. It's a little tricky and that's why you should have experience in laptop disassembly.

  If you want a new battery of the BIOS, you must contact the nearest authorized service provider. Technicians can do for you.

  But why do you want a new battery? The battery will also be charged if you have the AC/DC adapter connected.

  Good bye

• Cannot install Windows 8, assuming that its due to the video card... Need help!

  Hi all, I'm terribly frustrated today. I think the video card, a brand specifically 6450 marked as a 7450 here, is at the origin of the problems. The pilot was a mess and when I updated and restarted windows 8 (using the stock drivers) then updated after hesitating to Windows 8. After I restarted my computer, windows 8 has been roasted and I couldn't access what anyone, I had to do a recovery install. I wonder if there are any suggestions as to what I can do here, would like any advice! Nick

  HI there - don't know why I don't post the model (h8-1227, a Pavilion), but regardless, the issue was not the video card.

  It's a seemingly simple, innocuous add-on I've used for over 2 years.

  Never heard of the Asus AI Charger?  It is used to help to "mount" the power to the USB ports on a computer, allowing an iPad draw enough power to recharge in FACT.  It has been a great feature to my computer.

  However such, it killed my first USB 3.0 ports, completely.  I would like to install the HP drivers and the USB port will work until I rebooted, then it stops.

  I completely misunderstood this as something that might have been originally, but here, I looked at the USB ports in the Device Manager and saw the tag HAVE charger which they are attached.

  Something SMALL, simple as it seems, is what was causing all that headache and frustration.  I probably lost more than 20 hours trying to solve a problem this stupid thing caused.  I even ended up buying a new video card, guess THAT's what the problem is here.

  What's happened is that the only TWO things I have installed in the computer were the new drivers for video card, Office and the charger HAVE stupid!

  Sometimes the simplest things are the most stupidly frustrating things!

• Portege S100: SD led flashes but the SD card cannot be recognized

  I tried several SD cards (size & make) in a S100, while the device tandis que l' appareil clignote flashes light when I push the SD card, it does not appear as a disk. The format utility does not show an installed device, nor the password protection software.

  The laptop is running XP pro.

  An idea

  Hello

  According to the user manual the laptop supports several sizes with SD cards, but housing is unable to accommodate multimedia cards (MMC)
  don't forget to use the right card (Toshiba)
  But if you use the right SD card so I would recommend removing the slot and the driver for the SD card from the Device Manager.
  The new after reboot, you must reinstall the driver again. Check the Toshiba driver pager for the SD card driver updates.

• Re: Portege R500: where should I put the SIM card?

  Hello

  can someone help me? Where should I put the SIM card? The user manual make no mention of this.

  Thank you.
  Bruno.

  Hello

  I hope that the answer to your question, you can find HERE

  Good bye

• Need a script for the network card and Vswitch info

  Hello

  
  Can we have a script to list out the output of information network/vsiwtch as below for all clusters in VC to CSV

  . Name of host mcadress name of the physical card Vswitch name team Vswitch (NLB/FTL)

  Hello

  Sorry for the late reply, was absent for a few days

  It's the new version:

  $output = foreach ($esxi Get-cluster |) Get-VMHost | Name sort)

  {

  foreach ($vSS in (Get-VirtualSwitch - VMHost $esxi))

  {

  $pnic = $vSS.ExtensionData.Pnic - replace ".". *- » | Kind of Teddy bear

  $mac_address = foreach ($p in $pnic) {$esxi.ExtensionData.Config.Network.Pnic |} Where-Object {$_.} Device-match $p} | %{$_. Mac}}

  $esxi | Select-Object @{N = 'ESXi'; E={$_. Name}}, @{N = "Physical map"; {E = {[String]: Join (",", ($PNIC))}}, @{N = "MAC address"; {E = {[String]: Join (",", ($Mac_Address))}}, @{N = 'vSwitch name'; {E = {$vSS.Name}}, @{N = "vSwitch political grouping"; {E = {$vSS.ExtensionData.spec.Policy.NicTeaming.Policy}}

  }

  }

  $output | Export-CSV "C:\output.csv".

  Example of output:

  ESXi: test

  Physical map: vmnic0, vmnic1

  MAC address: 11:22:33:44:55:66, 11:22:33:44:55:67

  vSwitch name: vSwitch0

  vSwitch political group: loadbalance_srcid

  ESXi: test1

  Physical map: vmnic2, vmnic3

  MAC address: 11:22:33:44:55:68, 11:22:33:44:55:69

  vSwitch name: vSwitch1

  vSwitch political group: loadbalance_srcid

  Hope this helps,

  Steven.

• Portege M200: How do I remove the screen to clean behind?

  I literally (little bug) bug that crawled up behind the screen on my M200, who died later - pixels so rather than dead, I have a bug dead - is there a way to remove the sensitive screen to clean behind it and replace it without damaging it?

  Nev

  Hello

  I t is recommended to remove the screen and open it.
  The screen is one of the most expensive parts of the laptop.
  If you have no experience in such proceedings it is possible that you may damage the entire screen.

  However, I think the screen is fixed with screws that you will find the image of the screen. But in your case, I recommend contacting the service to remove the dead bug.
  The guys have more experience and can remove it more quickly.

• Portege M200: Pen stops writing to the screen

  I have problem with pen.
  Feather do not write on the screen.
  Help, please

  Could you give more details?
  Have you changed something? What screen mode do you use?

  Have you checked the pen settings in Tablet and pen settings in Control Panel?
  The parameters are placed in the last tab called Pen Options

  Check it out.

• Need help to upgrade the video card, etc... HP pavilion a6512p

  I have

  HP Pavilion a6512p-KT369AA

  System: KT369AA #ABA

  [Personal information]

  Windows Vista 64-bit

  500g disk

  4g memory

  Everything is in the factory.

  I'm not sure how powerful, wanting to install a graphics card but I can install it. I looked on the HP site, but he has just given specs on the integrated video card was already about this. Any suggestions?

  I am preparing for the release of Guild Wars 2... so I already know I need to make the memory of perhaps 8g... Need a graphic card card... and maybe upgrade my power supply.

  Any suggestion would be appreciated on all! (I'm passionate about new technology! and settle all myself)

  Thank you

  Robin

  RobinLea70 wrote:

  I'm so sorry... I got the right forum of thought. my bad!

  EKKK never gave it a second thought on the CPU! shit! Thank you for this comment!

  Rall fo thanks for your help!

  No mate problem!

  A new processor, power SUPPLY and a graphics card means that, probably, a new decent machine might be a better option. Take a look on ebay, I suggest that a few Intel Core i5 - 750 can be a very good machine, because it's a pure core quad and beats even a core i7 mobile Processor...

  http://www.eBay.com/Sch/i.html?_nkw=core+i5+desktop&_sacat=179&_odkw=core+i5+workstation&_osacat=179

• Installation of Windows 7 has failed due to the graphics card, can not go beyond "Complete Installation".

  Hello, I'm trying to reinstall Windows 7 Professional 64 - bit after an accident which is more allow me to start on the login screen of my previous installation of Windows 7 Professional 64 - bit.  When I try to reinstall the installation hangs and will not finish (even at night) on the stage of "Complete Installation"... ».  During my first install of Windows 7 on this computer I had the same problem and finally worked my way around it by removing the 2 GB of RAM (2 GB installed leaving) and the replacement of my gpu NVIDIA 8800GT with a gpu NVIDIA 8600.  I don't have the right to replace the gpu, and I believe that this issue could possibly be resolved by installing a suitable driver for the 8800GT before starting the installation.  Since I can't start is no longer in Windows 7 in a form in any way, the only option I know is to use the option to load drivers in the system found on the DVD itself System Recovery Options.  When I find the correct driver and install it, it returns the error "failed to install".  I am now at a loss to know what to do because it was the only solution I could think, am I missing something?  If this is not the case, how can I get Windows 7 installed again?  Thanks for any help.

  Hi Limerick,

  Please see the artcle following with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Need a recommendation of the video card for CS4

  My old Radeon x 1950 is not up to the task when it comes to Windows 7 and Premiere Pro (it works fine on Vista, but I'm going to 7), so I need a replacement. I not looking for more late-and-most great... in fact, a map of the previous generation would be fine. My HP xw6400 workstation is a few years old, but has a lot of life left in it for my application, so I just need to update that element.

  I'll probably get on eBay for an old or inexpensive card of the current generation, preferably around $100. He just needs to me until I can fully update (read: replace) my current workstation. Any recommendations for the CS4 and W7 x 64?

  I would have a look at an ATI HD4670 or a HD5450. Both are well meet your needs and are an attractive price tag, until you decide to upgrade to a new MEPS supported card.

• Satellite L750: can't play Battlefield 3 due to the graphics card driver

  Hey guys and girls,

  I just bought a new satellite L750 and I want to play battlefield 3 on it... but when I start to play the game, the game tell me to update the drivers above 288,7, but when I look at this site there is to refresh 266,8...
  One would be kind enough to tell me where I will be able to find Nvedia gt525m drivers that are above 288,7.

  Note: I already tried the Nvedia site and the update does not work.

  Hello

  Either you get on the nVidia site the new GPU driver or you try drivers from some 3rd party as www.laptopvideo2go.com/drivers pages

• Need graphic driver for the graphics card Radeon

  My laptop has a Radeon graphics card and Windows 7 is installed on my laptop.

  Please help me find the graphics driver for the Radeon graphics card.

  Hello:

  Please follow steps 1-4 to get the graphics to work.

  1 install the Intel chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+ins...

  2. install the Intel graphics driver and restart.

  64-bit:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3720&DwnldID=23639&ProductFamily=GRAP...

  32 bits:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23638&lang=eng&OSVersion=Windows%207...

  3. download and install MS .NET Framework 4.0.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851

  4. download and install the latest amd catalyst driver beta.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

• Need a driver for the video card multimedia on VGC - RB44G Office

  Hello!

  I had to reinstall Windows and can not find the driver for the multimedia video controller.  The device id is:

  PCI ven_4444 & dev_0016 & subsys_813d104d & rev_01

  I went through all the drivers on the page of the appropriate driver, but this driver is not found.  All other devices have been managed by very good list, with the exception of this one.  Can you help me?

  Thank you
  Kevin

  kbentch,

  What is the Sony MPEG Encoder of the pilot? Please note that the link is a Windows XP driver.