Portege R500: How to activate the control buttons after the new installation of Vista

Similar Questions

• Portege R500: How to activate the modem umts / 3g under Kubuntu 8.04? (Fn + f8)

  Hello

  I just installed kubuntu x86_64 on portege R500, but I can't turn on the modem umts / 3g.

  On Windows, I use Fn + F8 to activate it. When I use the key combination a new light begins to Flash next to the Ref. Leucht wireless meaming 3 g/umts is turned on but I can´t do on Linux.

  I have can´t activate so lspci even can not find the umts modem.

  I tried an option in the bios saying "Device Config: all devices / Setup by OS" (I tried the first option all devices), but I can't yet find the Linux umts modem.

  I also downloaded the utility toshet [http://www.schwieters.org/toshset/] but didn t find any option related to 3 g/umts modems.

  Any idea on how to activate it?

  Thanks in advance.

  FN key features are controlled by the tool designed by Toshiba. Toshiba doesn't support Linux for now and as a result there is no Linux tool to achieve this.

• Portege M700 - how to activate the login of fingerprint

  Hello world.

  I've had my M700 for about three months now. I always knew that there was a connection to fingerprint, but recently, I wanted to have activated.

  Does anyone know how to activate the login of fingerprint? I tried to research material and through the program files, but nothing...

  Thank you.

  Hello

  You have pre-installed program called True Suite Access Manager.
  This software of s of fingerprints. You should find it in the folder utilities Toshiba!

• How to activate the VBScript engine in Vista SP 2

  I desperately need to know how to activate the engine of VBScript in Vista SP 2, so I can download chart DisplayLink.

  Hello
   
  I suggest you run a fix it which may help you to solve your problem:
  http://go.Microsoft.com/?linkid=9648765
   

• Restore backup files after the new installation of Vista

  I recently had to replace my main hard drive as it has completely crashed and burned.  Fortunately, I thought, I had been diligently backing up to an external hard drive.   So after replaced by a fresh hard drive and a new installation of Vista, I thought I could just restore these files from backup... but no luck.  New Vista does not recognize the old Vista backup.  And it will allow me to migrate these files in any usable fashion.  Is it possible for me to get the new Vista installation to access these backups from the previous installation of Vista?

  Hi Allisonerik,

  (1) what happens when you try to restore?

  (2) you get an error message?

  (3) was it a file, or a backup system image?

  I want to clarify if your backup media (external hard drive) is recognizing in Windows.

  Method 1: Put the computer to boot and then check to see if you can restore

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: Check your external hard drive to find errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  See the links below

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Portege R500 - how to check the warranty status?

  Hello.

  You just bought the Portege R500, used a!
  But THERE AR ANY WARRANTY mark on the back. The user has deleted everything back!
  Is it possible, how do I know about the warranty in this case. ?

  PC suite XP OS seems with assistance from Toshiba!

  Hello

  Normally be guaranteed can be checked with the serial number you've already written. I m using Windows XP too and if you start the tool of diagnosis PC from TOSHIBA, it shows all the information about your computer and hardware. There you can also see the serial number.

  Check this box!

• The display is loose on my Portege R500 - how to tighten the hinges?

  The display is loose on my portege r500.

  Does anyone know how to tighten the hinges?

  Hello

  I think that this procedure is very delicate and in my opinion it s a job for a technician.
  I m don't know if you can tighten the hinges if necessary he s need to replace the old hinges

  Is it the hinges are hidden under the plastic around the screen frame.
  The LCD mask is fixed with screws I m but not quite sure how much could be three screws. They are hidden under the mask of small cushions.
  You will need to remove and the tightness of the extra mask.
  Then you can remove the LCD mask. The hinges should be visible now

  But there s more complicated as it may seem the R500 is a nice unit, and it would be a shame that you would damage the LCD screen. The LCD screen is an expensive part, and in my opinion it is worth to ask a professional for help

  Welcome them

• How to activate the new button in the Workbench of invoice in Payables in 12.1.1

  Hi all
  
  In accounts payable, the new button in the workbench invoice showing off.
  I use 12.1.1 version.
  Could someone please help me how can I activate this new button.
  I am creating the invoice through workbench invoice no quick Invoice window.
  
  Thank you

  Hello

  This could be due to several reasons...

  Reason n ° 1 = you only access and not allowed to create invoices

  Survey Navigation responsibility for accounts payable = > bills > inquiry > invoices
  Entry Navigation responsibility for accounts payable = > bills > entry > invoices

  Reason 2 = explode on navigation ENTRY you always see the NEW button is disabled, this means
  accounts payable system does not allow the creation of individual bills, you must create only in batch mode.
  Check the value of the profile option ' AP: use invoice batch commands. If the value is YES, it is intentional that NEW button is disabled...

  Reason 3 = you use Navigation entry, your responsibility is not enabled for lots of bills
  The Bill create function could have been excluded from the responsibility...

  Kind regards
  Ivruksha

• Portege R500 - how to disable the touchpad?

  Hello

  I have a Portege R500 with XP SP3. I work with a USB mouse and I want to disable the touchpad. Fn + F9 does not work. Other Fn keys work correctly.

  Any idea?

  Thank you

  Hello

  On the Toshiba download page you will find Touch Pad on / off Utility. Have you installed on your Portege?

• Portege R500 - how to replace the SSD?

  Hello

  1. I have trouble using the recovery CD. The computer to read the CD once and give me an error message that it cannot partition the SSD drive. Ask me to restart the PC. Then I insert the CD change once again, the sequence of boot on the CD, but now, the computer does not recognize the recovery CD. Now, the freezing of the PC after start.

  2. I have a legal windows vista CD I tried to install in the PC but I'm not a clean install because the computer does not read the CD

  3. I tried the CD in another computer. I insert the CD to reboot and the computer immediately went to the wizard of microsoft vista.

  4. I tested the CD rom and it works.

  5. I believe that the solid state SSD laptop drive has failed.

  I opened my laptop to check what I need to buy the brand SSD. However, is the first time that I change a SSD drive and I don't know where he is and how to replace. So, if someone can answer with the steps of how to do to replace the SSD I will appreciate it.

  Thank you
  Nils.

  Hello!

  In my opinion, it could also be a problem with the CD/DVD drive. I mean you have tried another drive and the computer laptop doesn t read this disc too.
  So for me it sounds like this drive is also defective.

  But as Akuma said you should also check the SATA Mode in the BIOS.

  I think the best way would be to contact you nearest ASP. They can check a defective hardware for laptop parts and Exchange. If your laptop is under warranty, repairs are free.
  The ASP s list that you can find here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• How to activate the new feature of the tab that shows a dozen favorite web pages? It works for a short period, when a fresh FF is installed, then it stops working.

  What I get in a new tab is a header that says: "You've opened a new tab" and a search box. I prefer FF functionality that shows my web pages favorite when I open a new tab, but it seems a bit unstable and precarious. If I could easily restore function, I'd be pretty happy. The help on this function information told to click a button to add a webpage, but I don't see this button on my 16 FF. The help page also refers to the "pin" a web page to the new tab page with a PIN icon, but I have not either this icon.

  Thank you! The tool "searchreset" worked. He changed the content of "browser.newtab.url" of something long and messy to "subject: newtab", and now it works as it is supposed to. Then I have to find a way to pin my favorite pages to the new tab page...

• Satellite L40 - Wlan issue after the new installation of Vista

  Hello
  I have Toshiba Satellite L40 and I lost the recovery disk. So I download the drivers from the Toshiba website and install them. I have a new installation of windows Vista Home premium Edition SP1 also. But Atheros Wireless did not work properly. There a lock button icon status change not always off and the light is always too. But on the screen top left icon that shows the field of wireless connection there.

  Should I install any other updates vista? or am missing some other facility?

  Thanks for this short notice!

• Portege R500 - how to activate Vista backlight function?

  Hello

  I installed Vista Ultimate x 86 on my R500. To enable all the features that I have downloaded all the drivers from the Toshiba support pages - including value-added Pakage, who as far as I know should enable the backlight function. However, I was not able to turn on the backlight of the laptop features. If I press the button for backlight function nothing happens :-(

  Any ideas how to solve this problem?

  Kind regards

  Johannes

  Hello

  First of all he must know that sometimes it can happen that Toshiba VAP would not fully support Vista Ultimate.
  This means that some features unique VAP wouldn not like on preinstalled Vista Home Premium

  In any case, there are a few options that need to be verified;
  First go into the BIOS and check if the LED light is activated (some BIOSES contain this option). Second, you should check the Toshiba control utility buttons if LED lighting has been assigned to this button too.

  I m R500 not owner but I have are a U400 Sat and lighting such option in my Toshiba control utility.

• Portege M700: How to activate the touchpad Vista (by software)?

  Hello

  I use a Portege M700 Vista.

  Some time ago, due to a problem of cursor (he jumped at random on a different position in the text I type), I turned off (by software) the (use of the) touchpad. From there on, I use the M700 keyboard and an external mouse.

  Unfortunately, I have forgotten how I did it and am now unable to turn the touchpad... Even after spending a lot of time looking for the command (under Vista), I have not discovered its location...

  Any help woud be appreciated.

  Thanking you.

  Hello

  The touchpad can b switched ON and OFF using the FN + F9 key combination.

  This work of service on most Toshiba laptops!

  PS; This is also mentioned in the manual of user ;) take a look at the user manual if you need more information on your laptop.

  Welcome them

• Portege Z30 - how to create the new partition on SSD

  Hello
  I have a Toshiba Portege Z30 with a 512 MB SSD. In addition to the C partition, I would D for the work and E for personal stuff.

  By default, the laptop came with only C, but the disc already has 4 partitions:
  -a healthy active recovery of 1.46 GB partition
  -c a partition
  -a 16 GB Hibernation partition
  -a healthy 11.55 GB primary partition called drive HARD recovery when I use MiniTool Partition Wizzard

  I managed to get 300 GB of unallocated space, but I can not use this space to create D and E, apparently because the MBR does not support more than 4 partitions.

  Question: should I have all these partitions Toshiba? Is there a workaround for D and E? Can I create a USB drive recovery system and get rid of the recovery partition?

  Thank you

  Before starting any discussion, I hope you didn t screwed up something. Why?

  When you get laptop it has the factory settings and just with the factory settings, you will be able to create a media recovery (DVD or USB depending on the model). I hope this isn't too late now.

  Try to create a recovery media as soon as possible please.
  Post it please comment how it works. I hope that everything will be OK.